We use the SoC's UUID to generate a fixed MAC for a particular
switch device. The MAC generated uses a Realtek prefix and then
is followed by 3 bytes genertaed from the first 3 bytes of the
UUID xored with the last byte in order to prevent being able
to deduce the UUID from the public MAC.
Without this fix N-type SOC devices like RTL8372N, RTL8383N and also the
4-port PHY RTL8224N, don't have a functional Serdes. Although the SOC
sees a link, there is no packet flow on both SFP-port nor RTL8224 ports.
Added helper functions to read/write to the RTL8224.
RTL8224 has the same register layout so we can use the same register
defines as for the main SOC.
Detect the SOC type and variant. RTL8372 vs RTL8373 and also is it as
non-N/N variant of the SOC.
Even if the machine profile is wrong the hardware will be initilised on
the detected type.
This adds an implementation for trapping IGMP packets to the CPU
which will identify IGMPv1/2/3 packets, but handle only v3.
The implementation then inserts/updates/deletes L3 MC entries
in the L3 lookup table. The entries consist of an Ipv4
Destination IP (the IPv4 MC address), a Source IP (0.0.0.0) and
a Portmask. Note that this implementation is not VLAN aware,
as there is no hardware support in the device.
An alternative strategy is to control switching of the L2-MC packets
in which the IPv4-MC packets are transported (dst-MaC is
01:00:5e:xx:yy:zz, with xx:yy:zz corresponding to bits in the Ipv4-MC
address). This will allow to use VLAN-aware packet switching. While
code support is there for table insert/update/deletes, some further
L2 configuration is missing.
There is no support for IPv6 MC, yet.
This fixes handling of the SFP ports in the stat command.
The output of the command now is for physical ports, which however are
not shown in sequence.
Compiler
rtl837x_port.c:466: warning 116: right shifting more than size of object changed to zero
provided value is a uint16. So shifting it more then 16 cause this error.
Solution: cast the value to uint32_t.
Each register holds the STP port state for one Forwarding ID (FID),
of which there 16 can be used by the RTL8372. The mapping between
FID and VLAN is done in the VLAN table. This allows the SoC
to maintain 16 different MSTP states.
In the register 2 bits per port are used to designate the following
(R)STP states
00 disable, 01 blocking, 10 learning, 11 forwarding
The STP listening state is not available.
logicog
TylerDurden-23
chriz
René van Dorst
feelfree69
logicog