gitproxy/RTLPlayground
1
0
Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-08-30 14:52:51 +08:00
Code Issues Packages Projects Releases Wiki Activity

Compare commits

base: gitproxy/RTLPlayground:dhcpd
Branches Tags
gitproxy/RTLPlayground:main gitproxy/RTLPlayground:rtl8221b_100m_support gitproxy/RTLPlayground:2x10g gitproxy/RTLPlayground:revert-252-main gitproxy/RTLPlayground:sfp_speed gitproxy/RTLPlayground:chacha20 gitproxy/RTLPlayground:dhcpd gitproxy/RTLPlayground:ZX_SWTGW215AS gitproxy/RTLPlayground:multcon
gitproxy/RTLPlayground:v0_1_alpha
...
compare: gitproxy/RTLPlayground:52cf759bece38bd95307d8a8437443b562ade8ce
Branches Tags
gitproxy/RTLPlayground:main gitproxy/RTLPlayground:rtl8221b_100m_support gitproxy/RTLPlayground:2x10g gitproxy/RTLPlayground:revert-252-main gitproxy/RTLPlayground:sfp_speed gitproxy/RTLPlayground:chacha20 gitproxy/RTLPlayground:dhcpd gitproxy/RTLPlayground:ZX_SWTGW215AS gitproxy/RTLPlayground:multcon
gitproxy/RTLPlayground:v0_1_alpha
442 Commits
dhcpd ... 52cf759bec
Author SHA1 Message Date
logicog 52cf759bec Merge pull request #355 from bloqaudio/fix/l2-static-display 
httpd: read the static flag of an L2 entry from the byte that holds it
 2026-08-18 19:44:05 +02:00
René van Dorst cbbc6160f4 Merge pull request #357 from bloqaudio/fix/ingress-port-bound 
cmd_parser: reject port 0 in the ingress command
 2026-08-18 09:05:06 +02:00
bloqaudio a8d3b7d39a cmd_parser: reject port 0 in the ingress command 
The single-digit arm of the ingress parser guards with p - '1' > 9,
which no digit can satisfy: the largest, '9', gives 8. The digit that
needed rejecting is '0', which gives -1 and indexes one byte before
phys_to_log_port, so "ingress 0 t" reads out of bounds and applies the
ingress mode to whatever port number that byte happens to contain.
Ports are 1-based, so reject anything below '1'; values above '9' are
already excluded by the isnumber check before this.
 2026-08-17 17:19:46 -05:00
René van Dorst 80095ba617 Merge pull request #354 from DrDoof/fix/isolate-cpu-port 
port: reject the CPU port in isolate instead of refusing it silently
 2026-08-17 18:31:25 +00:00
bloqaudio a3d1a35e2f httpd: read the static flag of an L2 entry from the byte that holds it 
The MAC table listing tests bit 0 of byte 2 of the third table data
word for the static flag, but the flag lives in bit 0 of byte 1: an
entry written with byte 1 bit 0 set survives the aging engine
indefinitely where an identical entry without it ages out, and reads
back with exactly that bit set through both the address and the
next-entry read methods. Byte 2 of that word reads zero for learned and
static entries alike, so every entry has always been listed as learned
and a static entry has never been visible as such in the table listing.
 2026-08-17 12:17:42 -05:00
d00f 47b3ee60b6 port: reject the CPU port in isolate instead of refusing it silently 
parse_isolate() accepted a two digit port and mapped it to logical port 9,
the CPU port, while port_isolate() and port_isolation_get() both refuse
anything above machine.max_port. Setting the isolation of the CPU port was
therefore declined without a word and reading it always answered no
members, whatever the hardware held.

Bound the port to the front panel, so the command says what it does. The
digit is checked before it indexes phys_to_log_port[], which a non numeric
argument used to read past.
 2026-08-17 10:53:17 +02:00
logicog 59d20ed9b6 Merge pull request #339 from plaes/parallel-build 
Fix parallel build
 2026-08-17 08:11:25 +02:00
logicog f41ed2b943 Merge pull request #332 from DrDoof/fix/igmp-enable-gate 
igmp: only hand reports to the CPU while snooping is on
 2026-08-17 07:58:18 +02:00
d00f 56fa96c494 igmp: only hand reports to the CPU while snooping is on 
handle_rx() dispatched to igmp_packet_handler() on the destination
address alone, so an ordinary IGMPv3 report off the wire reached the
handler and could write a table entry whether or not anyone had asked
for snooping. The STP branch right above it is gated on stpEnabled;
this brings the IGMP branch in line.

Snooping state lived only in the per-port registers, and the receive
path cannot afford to read one per packet, so the flag shadows it:
igmp_enable() sets it, igmp_setup() clears it, and igmp_setup() runs
from both the boot path and "igmp off".

While here, igmp off becomes an explicit subcommand instead of the
fall-through, and an unrecognised igmp subcommand prints the usage
line rather than silently turning snooping off.

Six bytes of BANK1 and one of xdata, no internal RAM.
 2026-08-16 23:42:46 +02:00
René van Dorst 6bfcbd2f9a Merge pull request #349 from DrDoof/fix/lag-cmd-bounds 
lag: number the groups from one and bound what the command is given
 2026-08-16 06:48:28 +00:00
d00f fa7895ad62 doc: the aggregation example used group zero, which no longer parses 
The command now numbers groups the way 'lag show' prints them, so the
walkthrough would have failed at its first step.
 2026-08-16 04:10:03 +02:00
d00f 1ed8b131bc httpd: keep the send_l2 flags in bit memory 
The two flags added with the JSON fix sit in data, where internal RAM is
full enough that this branch stopped linking for some toolchains. __bit
puts them in the bit area instead and hands three bytes back to the
stack: SSEG goes from 131 to 134 on SWTGW218AS.

Patch by vDorst on the pull request.
 2026-08-16 01:23:56 +02:00
d00f 9ada6adad7 lag: number the groups from one and bound what the command is given 
lag show has always printed the groups as 1 to 4 while lag <n> took the
number literally, so typing what you saw configured the group beside it.
Both lag and lag hash count from one now, matching how ports are numbered
everywhere else, and reject anything outside 1 to 4. Subtracting '1' makes
0 wrap well past three, so one test covers both ends.

The port argument indexed machine.phys_to_log_port, which holds nine
entries, before it was checked, and a two digit argument reaches 109. It is
bounded before the table is touched rather than after.

port_lag_members_set() and port_lag_hash_set() complained about a group out
of range and then wrote the registers anyway, past the four the groups
occupy. They return instead.

lag hash also read cmd_words_b[1] without checking a word was there, and
now shares the error path parse_lag() already had.
 2026-08-16 01:08:30 +02:00
René van Dorst 719c6db228 Merge pull request #344 from DrDoof/feat/walk-l2 
html: move the L2 table walk into a shared walkL2() helper
 2026-08-15 21:38:43 +00:00
d00f a96fdfe10c html: move the L2 table walk into a shared walkL2() helper 
Both the L2 page and the ports page in #335 need to page through /l2.json
and decode the same fields, and the second copy arrived carrying the two
bugs the first one had only just been fixed for. Rather than keep two
copies in step by hand, the transport and the decoding move to main.js,
which every page already loads, and each page keeps only what is its own.

walkL2(onDone) pages through the table once, parses idx and vlan out of
hex, maps the port to a physical number or to 'CPU', and calls
onDone(entries, ok). It stops on a wrapped index, an empty page or 4096
entries, all of which set ok. A page that comes back as anything other than
200, or with a body JSON.parse rejects, is asked for again at the same
index up to three times; only once those run out does the walk end with ok
clear, so a caller can tell a finished table from a partial one. l2.js
keeps the s and l to label mapping, since that needs the page's own
translations, redraws only when ok is set, and restarts the walk from its
callback either way.

Two things change while moving:

The next request goes out from the previous reply rather than from a
setInterval that fires whether or not the last one came back. The httpd
serves one connection at a time, so a timer that outruns the responses only
queues work it cannot use.

A walk that reaches 4096 entries hands over what it collected. Before it
threw the entries away and cleared its own interval, which left the page
unable to refresh again until it was reloaded.

The retry is not a new idea, it is the old behaviour written down. The
previous code ignored anything that was not a 200 and let the interval ask
for the same index again, so a blip never disturbed the table on screen.
Dropping that on the way to a chained walk would have made every timeout
redraw the page with a truncated table, which at one connection at a time
is not a rare event.

Driven with a scripted server in node, running the helper itself rather
than a copy of it: an empty table gives 0 entries in 1 request; three pages
ending in a repeated index give 61 entries in 3 requests, asking for 0, 30
and 60; an empty page ends the walk after 2; a 500 and a malformed body are
each retried at the same index and then complete normally, asking 0, 30, 30
and 31; three failures in a row end the walk with ok clear and the 30
entries already collected; 4096 entries in one page end it with ok set; the
CPU port decodes to 'CPU'; vlan and idx come back as numbers.

main.js grows by 1331 bytes and l2.js loses 1039, so 292 bytes of flash.
Worth stating where they land: main.js is loaded by every page, so pages
that never walk the table now carry the helper too. That is the cost of
having the decoding exist exactly once, which is the point of the move.
 2026-08-15 23:16:29 +02:00
d00f 3fda9ccd86 html: handle an empty MAC table reply and fix the entry cap 
l2.js reads the last index of a reply to know where the next page starts.
With the firmware side of this branch an empty table answers [], and
s[s.length-1] then throws on undefined. It used to answer commas with
nothing between them and throw in JSON.parse instead, so this is the same
case reaching a different line rather than a new one. An empty reply now renders what
has been collected and starts the next pass from zero.

The 4096 entry cap compared the array against the number instead of its
length, so it never fired: an empty array and a 5000 element one both
compare false. Comparing the length restores what the check was for.
 2026-08-15 23:14:49 +02:00
d00f 3be6667789 httpd: emit valid JSON from send_l2 
The MAC table listing wrote its separator once per iteration rather than
once per object. An entry the table engine reports as invalid produces no
object, so it contributed a bare comma, and two in a row give ",," which
JSON.parse rejects. The whole table then fails to load, not just the row
that was missing. The separator now goes before each object and the
closing bracket after the loop, which is the shape send_vlanlist already
uses further down the file.

The next index for an invalid entry was computed as h | low + 1, and the
addition binds tighter than the or. That agrees with (h | low) + 1 except
when the low byte reads 0xff and bit 8 of the index is already set, eight
of the 4096 combinations. There the result is the start of the current
block of 256 rather than the start of the next one, so the walk repeats a
block it has already covered. Reading the index once after the branch
rather than once in each arm removes the second copy of that expression
along with the bug.

The VLAN now comes first in each object. It is taken from the same
L2_DATA_OUT_B read that decides whether the entry is valid, which saves
reading that register a second time. The page addresses the fields by
name, so the order they arrive in does not matter to it.

A bound check on the output buffer goes in for consistency with
send_vlanlist. Thirty entries of at most 74 bytes plus the brackets fit in
the 2500 byte buffer with 179 to spare, so nothing changes today, but the
margin was nowhere stated and L2_MAX_TRANSFER is a tunable.

5 bytes of BANK1, nothing in BANK2, xdata or internal RAM. Built for SWTGW218AS
and KP_9000_6XHML_X2 on sdcc 4.5.0.
 2026-08-15 23:14:48 +02:00
René van Dorst 5103d1c168 Merge pull request #338 from DrDoof/fix/lag-hash-default 
port: make the trunk hash default reachable again, and per group
 2026-08-15 21:01:09 +00:00
René van Dorst ce85576882 Merge pull request #346 from DrDoof/fix/crtstart-home 
Rename crtstart.asm to crtbank.asm
put the bank switching helpers in HOME-code location
 2026-08-15 20:33:54 +00:00
d00f 59c60504e7 crtbank: put the bank switching helpers in HOME 
__sdcc_banked_call and __sdcc_banked_ret were assembled into GSFINAL, which
sits in the startup path: GSINIT ends exactly where GSFINAL begins, so the
processor falls into it rather than being sent there. It works today only
because this object comes after every C object on the link line, so the
LJMP to __sdcc_program_startup is laid down first and the helpers land
behind it. Reordering that line, or moving main() into another module,
would put the helper body at the fallthrough address instead, and the board
would not come up out of a build that reports nothing wrong.

SDCC's own crtbank.asm declares the area order and then puts both symbols
in HOME, so the file takes that name and that preamble as well.

GSFINAL now holds the three byte jump and nothing else. Of 401 symbols 17
change address, every one in the startup region, and between the reset
vector and 0x0094 not a byte differs, so no interrupt vector is disturbed.

Run on a SWTGW218AS: it came back after about 42 seconds reporting the new
build, with its stored configuration byte identical and every link at the
speed it had before.
 2026-08-15 22:18:13 +02:00
d00f a3c586ef38 port: make the trunk hash default reachable again, and per group 
Wrapping REG_SET restored the guard in front of the hash default, and
that exposed three things about the line it guards.

The test was against zero. The register does not read zero: it comes out
of reset holding source port number plus both MAC fields, both IP fields
and the L4 source port, which the header now names LAG_HASH_RESET.
Measured on an SWTGW218AS, where all four groups read 0x3f after a cold
boot and a value written before a power cycle is gone afterwards. With
the guard working and the test unreachable, the default would never be
installed, where before it was installed on every call. Testing against
the reset value restores the intent, and zero is still accepted in case
another device does reset that way.

The write went to the base address while the read that decides it used
the group offset, so a group other than zero was tested and group zero
was written. Both ends use the offset now.

The range check printed a complaint and carried on. It returns, which
matters more now that the hash write also uses the group number to build
an address.

Thirty bytes of BANK1.
 2026-08-15 22:01:08 +02:00
René van Dorst 8bc530d3d0 Merge pull request #347 from DrDoof/feat/lag-members-get 
port: read a trunk's members through one function
 2026-08-15 19:23:50 +00:00
d00f f2c6ac01d9 port: read a trunk's members through one function 
The member mask of an aggregation group is decoded by hand in two places,
the lag command and the JSON behind the aggregation page, and every branch
that touches trunks adds another copy.

port_lag_members_get() sits next to port_lag_members_set() and both readers
call it. It answers from the hardware, so it covers a group configured with
lag and one a protocol brought up, without either having to say so.

It reads through reg_read() rather than reg_read_m(), so sfr_data is left
alone. Neither caller looked at it afterwards; both read the hash register
next.
 2026-08-15 20:55:56 +02:00
René van Dorst 94d9f2c8e8 Merge pull request #341 from DrDoof/fix/counters-port-index 
httpd: check the port index /counters.json is given
 2026-08-15 07:52:54 +00:00
d00f 0503e7952d httpd: check the port index /counters.json is given 
The handler took one raw character of the request line and passed it to
send_counters(), which uses it to index machine.phys_to_log_port. That
array has nine entries and the character is whatever the client sent, so
the read ran up to 246 entries past the end and the result went on to
STAT_GET as a port number. is_word() accepts any request whose name is
followed by a question mark, so nothing constrained the byte to a digit.

Bounding it where it is read keeps the check beside the assumption it
protects and needs nothing from the machine description. sdcc leaves
plain char unsigned and the subtraction wraps in eight bits, so a byte
below '0' comes out above 200 and one upper test covers both ends:
exactly '0' to '8' now reach send_counters. The compiled test is
add a,#0xf7 followed by jnc, which I read back out of the assembly rather
than assuming.

Out of range answers 400 by the path the other malformed requests already
take, rather than an empty array. An empty array would have been worse
than useless here, since the statistics page calls BigInt on the first
element before it looks at the length. The page asks only for index zero
to the port count minus one, so nothing that answered before stops
answering, and a non-200 reply makes its handler do nothing at all.

11 bytes of BANK1, nothing in the common segment, BANK2, xdata or
internal RAM. Built for SWTGW218AS and KP_9000_6XHML_X2 on sdcc 4.5.0.
 2026-08-15 00:49:21 +02:00
René van Dorst 787d593996 Merge pull request #337 from DrDoof/fix/igmp-dup-loop 
igmp: drop the duplicate port configuration loop
 2026-08-14 22:12:33 +00:00
René van Dorst db2a541e5f Merge pull request #331 from DrDoof/fix/reg-macros-braces 
regs: wrap REG_SET and REG_WRITE, and fix what that uncovers
 2026-08-14 21:29:03 +00:00
Priit Laes 11be13fe53 build: Fix double generation of html_data 
Make supports grouped target which runs once for all listed targets.
 2026-08-14 11:16:05 +03:00
Priit Laes 65f8afb908 build: Remove undefined html variable 
HTML target references $(html) which was never defined, which
causes find to run through the entire source tree.
 2026-08-14 11:16:05 +03:00
Priit Laes 0126b159bf build: Make create_build_dir PHONY and add order-only deps 
Mark create_build_dir as PHONY so directory creation is never skipped.
Also add html_data.h as order-only prerequisite to the .c pattern rule,
fixing another the race where httpd/httpd.c and httpd/page_impl.c are
compiled before the generated header exists.
 2026-08-14 11:14:59 +03:00
Priit Laes 31024388ba build: Fix tools dependency for parallel builds 
Replace file-path prerequisite tools/output/fileadder with order-only
dependency on the tools PHONY target.

Also add tools as order-only dependency to the final .bin target which
invokes all of the tools.
 2026-08-14 11:14:29 +03:00
Priit Laes 9f2d6b72b7 build: Fix version.h race condition in parallel builds 2026-08-14 11:13:17 +03:00
d00f 5c5dcb5209 igmp: drop the duplicate port configuration loop 
igmp_setup() writes the per-port IGMP configuration twice, once with the
value spelled out and once with the same number assembled from the
constants: IGMP_MAX_GROUP | IGMP_PROTOCOL_ENABLE | IGMP_FLOOD is exactly
0x00ff7c15. The second loop carries the comment block explaining the bit
layout, so the literal one is the one to drop.

Today the cost is one redundant register write, because REG_SET is not a
single statement and the unbraced loop body only ever reaches index
machine.max_port + 1. Once the macro is wrapped it becomes one redundant
write per port on every boot and on every "igmp off", which is what makes
this worth removing rather than leaving.

Fifty nine bytes of BANK1 on SWTGW218AS, nothing anywhere else.
 2026-08-14 07:39:24 +02:00
d00f be6d47a3ab regs: wrap REG_SET and REG_WRITE in do { } while (0) 
Both macros expand to a run of statements joined by backslashes with
nothing around them, so as the unbraced body of an if or a for only the
first assignment belongs to that body. The other three and the
reg_write() call sit after it and run once, unconditionally, with
whatever the loop counter ended on. Wrapping each macro into a single
statement is what every call site already assumes it to be.

This hands the compiler no new room around the SFR writes, which is worth
showing rather than asserting. Building the whole image before and after
and comparing the generated assembly module by module, with label
numbering, block scope suffixes and the version string normalised away,
three modules differ: rtl837x_igmp, rtl837x_port and rtl837x_leds. Ten
modules call these macros, so the other seven come out identical, and so
does everything else in the image.

Those three differ because they hold the five unbraced uses. Two of them
want a fix rather than only the brace, and that is left to the commits
that follow.

Six bytes of BANK1 on SWTGW218AS, nothing anywhere else.
 2026-08-14 07:34:42 +02:00
d00fandd00f 4ff009dbfc uip: cap TCP MSS to 1460 to survive jumbo-MTU clients (#298) 
* uip: parenthesise UIP_LLH_LEN

The macro expands to a bare sum, so wherever it is subtracted the second term
gets added instead. UIP_TCP_MSS - and with it UIP_RECEIVE_WINDOW - therefore
comes out 24 bytes above the buffer's real capacity. UIP_APPDATA_SIZE and
UIP_REASS_BUFSIZE are wrong the same way, though neither is reachable today.

The additions, uip_buf[UIP_LLH_LEN] and friends, were right by luck.

* uip: keep the advertised MSS below the buffer edge

Deriving the MSS straight from the buffer size makes the switch advertise
exactly the segment that fills uip_buf to its last byte, and a peer that takes
it literally corrupts every large upload: the firmware image arrives fully
acknowledged, with no retransmissions on the wire, yet the CRC over the
streamed body never matches and the flash write is abandoned.

Isolated by changing nothing but the segment size, same buffer and same file:
1490-byte segments fail four times out of four, 1460-byte segments succeed,
745-byte segments succeed. Linux halves its segments against a window this
small, so only macOS on a jumbo link ever produces a full-size segment - which
is why the failure hides so well.

Where exactly the full segment breaks the stream is not pinned down yet; until
it is, the advertised MSS stays a step below the edge.

* uip: size the buffer to the largest frame the CPU port accepts

UIP_TCP_MSS derives from UIP_CONF_BUFFER_SIZE, and the buffer was large enough
for frames the hardware will never deliver, so the switch advertised a segment
size no peer could usefully reach. A client on a jumbo-MTU link took it at its
word and the oversized replies went nowhere.

Size the buffer to the ingress limit instead. ICMP bypasses MSS and so probes
the hardware directly: on a SWTGW218AS a 1502-byte payload is answered and 1503
never arrives, which puts the largest frame the NIC hands us at 1556 bytes of
uip_buf. UIP_TCP_MSS then derives to 1490, the same edge measured over TCP.

Frames above the limit are dropped by the NIC rather than written to the
buffer - an 8 kB ping leaves the switch untouched - so nothing overruns it.
Frees 644 bytes of XDATA.

* uip: trim these comments, one of which had stopped being true

The note above UIP_CONF_BUFFER_SIZE claimed the MSS derives from it as 1490.
It does not: the commit that follows pins the MSS at 1460 on purpose, a step
below that ceiling, because a segment filling the buffer to its last byte
corrupts large uploads. Left as it was, the file argued with itself.

Both blocks are shorter now. What justifies the numbers stays, which is the
ICMP measurement behind 1556 and the four-out-of-four failure behind 1460.
What went is the storytelling around them, which belongs in this thread rather
than in a config header.

* uip: derive the MSS from the buffer again, minus explicit headroom

The review asked why the buffer size and the MSS are both set by hand when one
used to follow from the other. They answer different questions, but the gap
between them is a number in its own right, so it gets a name now:
UIP_CONF_BUFFER_EXTRA, and UIP_TCP_MSS goes back to being derived.

The headroom is where the measurement lives. A segment that fills uip_buf to
its last byte corrupts large uploads: with nothing but the segment size
changing, 1490 fails four times out of four and 1460 succeeds. With the buffer
sized to the frame the NIC accepts, an extra of 30 lands on 1460.

Deriving it the other way round does not work. Sizing the buffer from a 1460
byte MSS gives 1526, which is 30 bytes under the frame the NIC actually
delivers. A 1502 byte ICMP payload occupies 1556 bytes of uip_buf and is
answered today, and it would stop fitting.

The generated image is byte for byte the same as the one with 1460 written out,
so the expression lands on the value that was measured.

---------

Co-authored-by: d00f <tokyusho@chatik.pl>
 2026-08-14 06:42:36 +02:00
René van Dorst 0c339e9123 Merge pull request #328 from DrDoof/fix/httpd-get-path-walk 
httpd: stop the GET request line walk at the end of the buffer
 2026-08-12 09:28:22 +02:00
René van Dorst 75151e0b00 Merge pull request #319 from bloqaudio/pr/cmd-editor-overflow 
cmd_editor: fix cmd_buffer overflow and CLI hang on long input
 2026-08-12 09:26:17 +02:00
d00f 43845b911b httpd: stop the GET request line walk at the end of the buffer 
The POST path tests for a NUL before it looks at a byte. The GET path did not,
and is_separator() counts only space, tab, question mark and equals, so a request
line carrying none of those walks past the end of uip_buf and writes its
terminator into whatever xdata it happens to stop on.

Everything that is not a POST reaches that walk. The pointer advances past the
method before anything checks that the method was GET, so a TLS record sent to
port 80 by a browser trying https first is enough on its own, as is a port
scanner or a malformed line. The stop is wherever the first space, tab, question
mark or equals turns up in memory, which is why the symptoms are erratic.

Two bytes of BANK1. BANK2 and xdata do not move.
 2026-08-12 03:22:01 +02:00
bloqaudio 0ed45e0710 cmd_editor: fix cmd_buffer overflow and serial-ring skip on long input 
Typing or pasting a line of 128 characters or more into the CLI hangs the
editor and overruns cmd_buffer[128]: the length check did not reserve room
for the terminating NUL written on Enter, and on a full buffer the character
was retried via continue without advancing the serial-ring read pointer at
the bottom of the loop, so input processing never caught up again.

Cap the line at CMD_BUF_SIZE-1 and, when full, drop the character but fall
through to consume the ring byte instead of spinning on it. The functional
change is three lines; the rest of the diff is re-indentation of the
insert-and-echo block (git diff -w shows the minimal form).
 2026-08-11 10:26:06 -05:00
logicog 5e30f8e6c0 Merge pull request #318 from bloqaudio/pr/mac-from-flash 
machine: optionally read the factory MAC from flash
 2026-08-11 14:32:32 +02:00
logicog 7f3c91ac0c Merge pull request #321 from bloqaudio/pr/dhcp-hostname-opt12 
dhcp: announce the hostname via option 12
 2026-08-11 14:30:21 +02:00
bloqaudio 3853a2701d machine: read a factory MAC from flash via mac_flash_offset 
Adds an optional per-board mac_flash_offset. When non-zero, RTLPlayground
reads a 6-byte MAC from that flash address and uses it if it is a valid
globally-administered unicast address; otherwise it falls back to the
generated locally-administered MAC. Offset 0 (default for every board)
preserves current behaviour.

Enable it for the SWTGW218AS, whose stock firmware keeps the factory MAC
in nvcfg at 0x1FC000. RTLPlayground images and web upgrades only touch
flash below that region, so the factory MAC survives flashing.
 2026-08-11 02:32:31 -05:00
bloqaudio 00a5f81871 dhcp: announce the hostname via option 12 
Send the configured hostname on discover and request so the DHCP server
can register the device (e.g. in local DNS). Skipped while the hostname
is still empty, i.e. before set_hostname_default() has run.
 2026-08-11 02:03:11 -05:00
logicog 53d865059d Merge pull request #320 from bloqaudio/pr/reproducible-build 
makefile: derive BUILD_DATE deterministically
 2026-08-11 08:50:05 +02:00
logicog b90aedd8f2 Merge pull request #316 from bloqaudio/pr/igmp-memset-cast 
rtl837x_igmp: cast &entry to __xdata pointer in memset()
 2026-08-11 08:43:28 +02:00
bloqaudio 6b190eb9f3 makefile: derive BUILD_DATE deterministically 
Honor SOURCE_DATE_EPOCH, falling back to the HEAD commit date and then
to wall-clock when git is absent. Same-commit builds become
byte-identical (BUILD_DATE is baked into the image and covered by the
trailing CRC), which makes it possible to verify that a binary matches
a source tree.
 2026-08-10 15:55:08 -05:00
bloqaudio fae16dabf5 rtl837x_igmp: cast &entry to __xdata pointer in memset() 
SDCC rejects memset() on the generic &entry pointer (error 78,
incompatible types). The ipmc/l2mc table entries are __xdata; pass an
explicit (__xdata uint8_t *) so the call resolves.
 2026-08-10 15:54:08 -05:00
René van Dorst 52692d05b1 Merge pull request #313 from DrDoof/fix/vlan-id-range 
Reject VLAN IDs and numeric arguments the hardware cannot take
 2026-08-08 20:51:43 +00:00
René van Dorst d364bd69e4 Merge pull request #306 from DrDoof/mgmt-vlan-gui 
system: show and set the management VLAN in System Settings
 2026-08-08 20:44:07 +00:00
René van Dorst 70ab7ff769 Merge pull request #307 from DrDoof/l2-sort-filter 
l2: fix the CPU/SFP port label, add sorting and filtering
 2026-08-08 20:29:50 +00:00
d00f e30976be76 httpd: move the management VLAN into /vlanlist 
Review feedback on #306. The value used to ride in /information.json and
the picker fetched /vlanlist separately, so the page needed both requests
to mean anything. /vlanlist now answers {"mgmt":N,"vlan":[...]} and the
picker reads both from the one response. Both consumers in vlan.js were
taught the new shape, and /information.json no longer carries mgmt_vlan.

The truncation guard now reserves 141 bytes instead of 139: the closing
grew to two bytes with the wrapping object, and the comma in front of a
non-first entry was never counted, so the worst case could land one byte
past outbuf even before this change. char_to_html() does not check.

The comments added on this branch are gone as well, style.css and
system.js both, since these files are served byte for byte.

page_impl.rel stays at DSEG 5, OSEG 0, BSEG 3 and the image reports the
same 10183 bytes of XDATA before and after.
 2026-08-08 18:26:49 +02:00
d00f 1a55a134c7 system: pick the management VLAN from System Settings 
`vlan <id> mgmt` existed on the CLI, but nothing reported which VLAN
currently carries management, so the setting was invisible from the web UI -
the only way to find out was to read the startup config.

Report it in information.json and offer it where the other switch-wide
addressing settings live, between Gateway and Language, as a picker filled
from the configured VLANs. When management is untagged there is no VLAN to
select, so that state shows as a disabled entry rather than inventing an id
the switch would reject.

Confirm before applying, and say what will happen rather than echoing the
action back: the switch starts tagging its own frames, and if the port you
came in on does not carry that VLAN the page becomes unreachable and the way
back is the console. Cancelling puts the picker back where it was.
 2026-08-08 18:26:49 +02:00
d00f 23f0ba995c css: align read-only values with the input fields 
The System Settings rows all pair a label with a form control, except Model,
which is a bare span. The inputs carry padding and a left margin, so their
text starts about 32px further in than the model name did - close enough to
look like a mistake and far enough to see it.

Give read-only values a class with the same metrics instead of styling the
model specifically; any other value shown without a control gets the
alignment for free.
 2026-08-08 18:26:15 +02:00
d00f 22a09bd06a l2: drop the comments and define the column list once 
Review feedback on #307: these files are served from flash byte for byte,
so comments ride along on every page load. The three added in this branch
are gone, 357 bytes across l2.js and style.css. The column list existed in
three copies inside renderL2() and is now a single const.
 2026-08-08 17:55:27 +02:00
d00f 930a08ec52 cmd: validate the port argument of mtu and pvid 
Both handlers turned the first character of the port word into an index
with no check at all. "mtu 0 100" computes '0' - '1' = 255, reads far past
the end of phys_to_log_port[9], and writes the size to whatever register
0x1250 plus that garbage points at. "pvid 0 2" walks the same path into
port_pvid_set(). lag and vlan already validate their port arguments; these
two just did not.

The port now has to be a single digit 1 to 9, which is exactly the range
the mapping table holds. A second digit or a stray letter falls to the
usage message.

"mtu show" also gained the return it was missing: after printing the table
it fell through, derived a port from the word "show" and printed the
garbage byte before the length check stopped it.
 2026-08-08 17:46:24 +02:00
d00f 1701d4dc53 cmd: refuse a management VLAN that cannot exist 
"vlan 5000 mgmt" parked the management interface on a VLAN the table
cannot hold, which quietly cuts management off. IDs above 4094 now fall
through to the usage message. 0 still switches the management VLAN off,
which is the documented way to disable it.
 2026-08-08 17:38:10 +02:00
d00f 1e19a9abe2 cmd: bound the PVID and say something when it is refused 
"pvid 1 5000" packed 5000 into the 12-bit PVID field and truncated on the
way, so the port ended up with a PVID nobody chose. 0 and anything above
4094 are refused now, matching what the VLAN table can hold. A failed
parse used to be dropped without a word; both cases print the usage line.
 2026-08-08 17:38:10 +02:00
d00f 1098e73337 cmd: stop "mtu" from acting on a value it failed to parse 
The handler threw away atoi_short()'s return and leant on the range test
alone. The range test cannot tell a failed parse from a small number, so
"mtu 1 99999" stopped at the partial 9999 and went through as a number
nobody typed. With the parse result checked, a failure is rejected with
the same message as an out-of-range value.
 2026-08-08 17:38:10 +02:00
d00f 99b0fc4b32 cmd: give mtu a lower bound as well as an upper one 
"mtu 1 0" was accepted. The chip takes it verbatim, the port reports 0x0000
back, and it stops passing frames: on a live 2.5G LAG member the LACPDU
receives moved by 4 in fifteen seconds against 21 on the sibling port, and
the partner went expired. Restoring the size brought both back.

Nothing shorter than a minimum Ethernet frame is a usable maximum, so the
range is now 64 to 16383. The upper end is unchanged and still comes from
the width of the field the value is written into.

This also covers most of #312 by accident: "mtu 1 abc" leaves the parse
result at 0 and now gets rejected on the bound rather than reaching the
register. It does not cover all of it. The handler still ignores what
atoi_short() returns, so "mtu 1 99999" stops on a partial 9999 and goes
through as a number nobody typed.

The GUI is not affected either way, it offers a fixed list of sizes.
 2026-08-08 17:30:25 +02:00
d00f 10d472d8a6 vlan: reject VLAN IDs the table cannot hold 
vlan_create() and vlan_delete() wrote the ID straight into the table index
register. vlan_get() has refused anything >= 0xfff for a while, so reads were
guarded and writes were not: "vlan 4095 1 2" built an entry that no read path
can see, and IDs above that either miss the table or alias onto another VLAN.

Both writers now enforce the range vlan_get() already did, and parse_vlan()
rejects the same values with the usage message so the CLI says why. The check
sits after the "vlan 0 mgmt" branch, which legitimately takes 0 to switch the
management VLAN off.

Costs nothing in RAM: rtl837x_port.rel stays at DSEG 0, OSEG 5, and the image
still reports 10207 bytes of XDATA in use.
 2026-08-08 17:13:28 +02:00
d00f 6254f44001 cmd: reject out-of-range numeric arguments instead of wrapping 
atoi_short() accumulated into a uint16_t without checking, so "vlan 65540"
wrapped to 4 and edited VLAN 4 instead of failing. atoi_byte() had the same
hole with "300" landing on 44. Both now refuse the digit that would push the
value past its type, before it lands.

The partial result is deliberately left alone rather than zeroed. Zeroing
would give the function one tidy rule, every failure leaves 0, but a caller
that ignores the return would then write that 0, and 0 is not a harmless
number everywhere. Set as a port MTU it stops the port taking frames: I put
0 on a live 2.5G LAG member and its LACPDU receives moved by 4 in fifteen
seconds against 21 on the sibling port, with the partner going expired.
Putting the size back recovered both. A wrong number does less damage than
that, and the real fix belongs in the callers that ignore the return anyway.

The test sits inside the loop rather than after it, so no wider accumulator
is needed and the parser stays off the internal RAM budget.

056a30a on the branch in #303 fixes atoi_byte a different way, by widening
the accumulator. Whichever lands first, the other hunk should go.
 2026-08-08 17:13:08 +02:00
René van Dorst c435838376 Merge pull request #308 from plaes/horaco-zx-sg4t2 
docs: Add Horaco XZ-SG4T2 skeleton documentation and images
 2026-08-08 12:08:27 +00:00
René van Dorst 3f7db7e430 Merge pull request #297 from DrDoof/hostname 
system: configurable hostname + show model on the System page
 2026-08-07 18:10:34 +00:00
René van Dorst f98fe32d0c Merge pull request #309 from plaes/http-security-fixes 
httpd: Fix buffer offerflow in scan_header
 2026-08-07 10:08:11 +00:00
Priit Laes d2e8ee0e41 httpd: Fix buffer offerflow in scan_header 
Fixes #300
 2026-08-06 15:24:09 +03:00
Priit Laes a9a455e447 docs: Add Puya P25D40SH flash chip to list of known supported 2026-08-06 10:57:49 +03:00
Priit Laes 3f26bf7348 docs: Use relative paths 2026-08-06 10:57:49 +03:00
Priit Laes ac302d4a67 Add barebones docs for already supported Horaco ZX-SG4T2 / WTG024AS-A-V2.0.1_4C_2SFP 2026-08-06 10:47:35 +03:00
Priit Laes 409bc58e17 docs: Add HC-SWTGW215AS to supported devices index 2026-08-06 10:13:29 +03:00
Priit Laes fbcec2cb5a docs: Fix capitalization/typos in company names 2026-08-06 10:06:24 +03:00
d00f ccb90ed16f l2: refresh the type column when a row is reused 
The paint loop reuses existing rows and rewrites port, MAC, VLAN and the
delete button, but never the type cell - only the insert path set it. With a
fixed row order that stayed invisible, since a row usually landed back where
it was. Sorting moves rows, so every other column followed the data while
type kept the previous row's value, which made sorting by type look broken
when the sort itself was correct.
 2026-08-05 21:42:54 +02:00
d00f 4389cfcd8b l2: show which column sorts and in which direction 
Clicking a heading sorted the table but nothing said so afterwards - the
only feedback was the rows moving, which is no help when the sort key is a
column you are not looking at.

Give every sortable heading a permanent marker: a neutral double arrow when
it is not the sort key, up or down when it is. The marker sits in its own
span so the i18n pass, which replaces the heading text, does not wipe it.
 2026-08-05 21:35:54 +02:00
d00f 5e901fb5c2 l2: sort and filter the forwarding table from its header 
The table lists every learned and static entry in one flat block, which is
fine with a handful and unusable with a few hundred: finding out where one
MAC sits, or what a port has learned, meant reading the whole thing.

Make the column headings sort and give each one a filter box. Filters are
substring matches combined with AND, so "port 8 + static" is two keystrokes.
A counter above the table shows matched out of total, so a filter that hides
everything is obvious rather than looking like an empty table.

Sorting keeps the CPU entry from comparing as a number - it sorts last
instead of landing between ports 8 and 9, where a string-vs-number compare
would otherwise put it.

The filter inputs live inside the existing header cells rather than in a
second row: the paint loop addresses data rows as rows[i+1], and a second
header row would have shifted every one of them.
 2026-08-05 21:21:03 +02:00
d00f 2974e4b66a l2: stop labelling the SFP port as CPU 
The port column was mapped from logical to physical numbering first and the
CPU label applied afterwards, testing for port 9. On an 8+1 board the SFP
port maps to physical 9 as well, so every entry learned on the SFP was shown
as CPU - on this switch that was 26 of 30 entries.

Label the CPU while the number is still logical, before the mapping, so the
two cannot collide.
 2026-08-05 21:21:03 +02:00
d00f 108ac9b8fc system: derive the default hostname after the startup config 
Move the MAC-derived default name out of main() into its own function and
call it after execute_config(), returning early when the config already
set a name - a configured switch then does no work for it at all.

The body deliberately has no local variables. Locals here - counters and
pointers alike - land in the 8051's internal-RAM overlay, and on an image
with LACP and STP both enabled that overlay is exhausted: a loop makes the
linker fail with "Could not get 8 consecutive bytes in internal RAM for
area OSEG". Moving the code into its own function does not help, since the
overlay is shared across the whole image, and hoisting the locals to xdata
does not either, because itohex() is inline and brings its own frame. This
only shows up in an integrated build; the branch on its own links fine.

Suggested-by: vDorst
 2026-08-05 16:48:36 +02:00
René van Dorst de3eca26c3 Merge pull request #301 from zytstudio/MACHINE_FG_4GT_2SX_V2_0 
Add FG-4GT-2SX_V2.0
 2026-08-05 08:53:02 +00:00
ZYT 8164166465 Fix mistake in comments 2026-08-05 11:15:48 +08:00
ZYT 87fe1e77ae Merge branch 'main' into MACHINE_FG_4GT_2SX_V2_0 2026-08-05 11:09:53 +08:00
ZYT a753f6f02e Add led colors and remove an unnecessary photo 2026-08-05 11:07:51 +08:00
René van Dorst c86d4b31f2 Merge pull request #304 from plaes/makefile 
makefile: Make CC and ASM overridable via command line
 2026-08-04 19:50:31 +00:00
Priit Laes 3c89b22207 makefile: Use origin check for CC variable 
Make defines defaults for commonly used variables, therefore
we need to check first how the variable was defined. If `default`
value was used, override it with our own default.
 2026-08-04 21:55:28 +03:00
Priit Laes bebe79c4c9 makefile: Fix possible shell injections in makefile 2026-08-04 18:53:23 +03:00
Priit Laes adb0b54691 makefile: Reorder sources to immediately fail on invalid MACHINE 
Also group and reorder source files and move each of these to
separate line.
 2026-08-04 17:57:53 +03:00
Priit Laes b99436543a makefile: Make CC and ASM overridable via command line 
This makes it easier to run make without docker within
distros without editing Makefile. For example Fedora:
`ASM=sdcc-sdas8051 CC=sdcc-sdcc make`
 2026-08-04 13:17:53 +03:00
d00f 1194823cd5 system: drop the defensive checks around the System page fields 
The hostname and model fields were populated through element-existence
checks and empty-string fallbacks that the other fields on the page do
without. Assign them the same way.

Suggested-by: vDorst
 2026-08-04 05:43:05 +02:00
d00f 94716ceb5d system: derive the default hostname from the MAC address 
Every switch came up as "RTLPlayground", so several of them on one
network were indistinguishable until someone configured a name. Append
the last three MAC octets (e.g. RTLPlayground-1ef924) - unique in
practice, still recognisable, and any "hostname ..." line in the startup
config overrides it as before.

Suggested-by: plaes
 2026-08-04 05:43:05 +02:00
d00f 13120127df cmd: make "hostname" report the name and reject stray arguments 
Typing "hostname" on its own cleared the name: with no argument the copy
loop never ran and the terminating NUL landed at index 0. Report the
current name instead, accept exactly one argument to set it, and reject
anything longer - a name with spaces tokenizes into several words, and
silently keeping only the first one is worse than an error. Walk the
buffer with a pointer, which the compiler codes better than indexing.

Suggested-by: vDorst
 2026-08-04 05:43:05 +02:00
ZYT 46037cd54d Add FG-4GT-2SX_V2.0 2026-08-02 06:46:52 +08:00
d00f e6cd362a1e system: show the hardware model on the System page 
machine.machine_name is already reported in /information.json as hw_ver;
surface it read-only on the System Settings page so the exact build
target is visible in the UI, without adding a redundant JSON field.
 2026-07-25 13:21:13 +02:00
d00f f21b3a32bd system: configurable hostname (device identity) 
Add a device hostname settable from the CLI (`hostname <text>`) and the
System Settings page. The value is sanitized on ingest to JSON-safe
printable ASCII (<=23 chars), stored in a shared __xdata buffer, seeded
to "RTLPlayground" at boot, persisted through the startup-config, and
reported in /information.json. It lives in the common header so other
modules can advertise it (LLDP uses it as the System Name TLV).
 2026-07-25 13:07:09 +02:00
logicog 35941dd19f Merge pull request #291 from DrDoof/fix/webui-login-cookies 
httpd: fix browser login (cookie parsed by name, Connection: close, self-contained login page)
 2026-07-25 11:09:19 +02:00
d00f 0f257d38df httpd: shorten comments per review 
Keep only the non-obvious bits; the rationale for each change already
lives in the respective commit messages.
 2026-07-25 10:39:32 +02:00
logicog 912e68d6eb Merge pull request #295 from sempr/main 
Fix rate range for SDS_10GR return value
 2026-07-25 08:21:53 +02:00
Sempr c473646389 Fix rate range for SDS_10GR return value 
Broaden range of SFP+ rates mapped to SDS_10GR
A commonly used SFP+ form-factor 10GBASE-LR (Hisense LTF1303-BH+) reports 0x62(	BR Nominal: 9800MBd) at
power on and then switches to 0x64 after booting up.

0x62 -> 9.8gbps
0x63 -> 9.9gbps
0x64 -> 10gbps
0x6f -> 11.1gbps
0x70 -> 11.2gbps

These are outside of the previous 0x63-0x6f range which prevented the link from ever being brought up. So I changed the range to 0x62-0x6f
 2026-07-24 16:02:20 +08:00
logicog 51cf40d040 Merge pull request #290 from eraiza0816/feat/dockerfile 
add: docker use prerequisites
 2026-07-24 07:58:12 +02:00
d00f 3fd9cdfa7e httpd: parse the session cookie by name, not fixed offset 
Root cause of the "browser login always bounces back with Wrong password!
while curl works": scan_header() read the session id from a fixed offset
into the Cookie header (p + 17), assuming "session=" is the first and only
cookie. Browsers keep stale cookies for a long time - e.g. an "admin" cookie
left over from this switch's VENDOR firmware - so the header can arrive as
"Cookie: admin=..; session=..", the fixed offset then points into the admin
value, authentication silently fails and every page bounces to login although
the password had been accepted. curl sends only "session=", which is why
command-line tests passed while a real browser (with that stale cookie) failed.

- scan_header(): scan the Cookie header for the actual "session=" key
  (matched as "session" - is_word() requires a separator after the pattern
  and '=' is on its list, the first value byte is not).
- is_word_x(): accept ';' as a terminating separator so the session value
  also matches when it is not the last cookie in the header.

Verified on hardware end-to-end in a real browser WITH the stale "admin"
cookie present: login -> index.html, all pages and JSON endpoints work.
 2026-07-21 06:48:18 +02:00
d00f 3189820ba0 httpd: send Connection: close (single-connection uIP mitigation) 
Real root cause of the "web login fails from a browser but works from curl":
the uIP httpd is built with UIP_CONF_MAX_CONNECTIONS = 1 and uses global
response state (outbuf/slen/session), i.e. it serves exactly one TCP connection
at a time and closes it after each response - but never advertises that via
the Connection header. A browser's HTTP/1.1 client therefore assumes the
connection may be persistent and can park it in its keep-alive pool for reuse;
a later request sent on that pooled connection hits one the server has already
closed, and a POST (unlike a GET) is never retried by the browser, so it can
be silently lost this way.

This adds "Connection: close" to every response so the browser does not pool
and reuse a connection the server is about to drop. On its own this did not
fully explain the reported login failures - the actual authentication bug is
fixed in the next commit (the Cookie header parsed at a fixed offset) - but it
is correct behaviour for a server that only ever handles one connection, and
removes one source of dropped requests.
 2026-07-21 06:47:44 +02:00
d00f ed74ec1e97 httpd/login: complete CSP + password autocomplete hint 
Two hygiene fixes for the web UI, prompted by a login that appeared to fail
under privacy shields (Brave Shields / NoScript-family extensions):

- httpd: replace the partial "style-src 'self' 'unsafe-inline'" CSP with a
  complete, first-party policy (default-src 'self'; script-src 'self'
  'unsafe-inline'; style-src 'self' 'unsafe-inline'; img-src 'self' data:;
  connect-src 'self'; form-action 'self'). Everything the UI needs is
  same-origin; the explicit policy stops shields injecting their own
  restrictive report-only probes (the noisy script-src-elem 'none' console
  spam) and passes a strict-CSP audit. Verified: no CSP violations in-browser.
- login.html: add autocomplete="current-password" so password managers
  recognise the field (they showed "unknown password" without it).

NOTE: these do NOT bypass a browser's LAN-device protection (NoScript "lan" /
Brave Shields), which strips the POST body of requests to a LAN address and is
why the login can fail in-browser while the same credentials work over curl.
That is a deliberate browser security feature; the user must allow the site in
their shields to log in. The backend password (default 1234) is unchanged and
correct.
 2026-07-21 06:47:10 +02:00
Your Name dd95a05487 add: docker use prerequisites 2026-07-19 19:49:30 +09:00
logicog 481c02c740 Merge pull request #289 from eraiza0816/fix/httpd-sim-const-warning 
fix: httpd-sim-const-warning
 2026-07-19 09:49:08 +02:00
Your Name 0a31a65477 fix: httpd_sim 2026-07-19 16:44:21 +09:00
Lynn-Becky 2d176b7ccc add SWTG024AS-A-V2.0.1 with 5 RJ45 port (#282) 
* add MACHINE_SWTG024AS_A_2_0_1_5_RJ45

* fix(machine): update SFP port LED color descriptions for PCB-SWTG024AS V2.0

* add(doc): create a simple documentation for SWTG024AS-A-V2.0.1_5_RJ45

* refactor(machine): update machine definition
 2026-07-18 06:20:47 +02:00
logicog a1fac63710 Merge pull request #286 from eraiza0816/feature/language-settings 
add language selection to system settings
 2026-07-18 06:18:33 +02:00
logicog 5c7f82e2fe Merge pull request #285 from eraiza0816/feat/dockerfile 
feat: add Dockerfile for development environment
 2026-07-18 05:58:10 +02:00
Your Name e765d17c2b feat: add language selection to system settings 
Add a language selector to the System Settings page supporting English,
Japanese, and Chinese. The i18n dictionary already contained zh
translations but lacked the UI to switch languages.

Changes:
- html/i18n.js: add sys_language key to en/ja/zh
- html/system.html: add language selector dropdown
- html/system.js: add changeLang() and selector initialization
- tools/httpd_sim.c: fix cookie parsing for multi-cookie headers;
  fix Set-Cookie response (missing Path=/, missing \r\n\r\n);
  add SO_REUSEADDR for faster port reuse
 2026-07-15 01:35:10 +09:00
Your Name 8fb9afb955 feat: add Dockerfile for development environment 
- Debian 13 (trixie) based with sdcc 4.5.0 from apt
- Includes gcc, make, xxd, python3, libjson-c-dev, golang-go
- Add .dockerignore to exclude build artifacts
- Add Docker usage section to README (collapsible)
 2026-07-14 02:10:55 +09:00
logicog e96780fadb Merge pull request #280 from tofurky/ddm_broken_module 
Add SFP quirk for devices that misreport DDM capability
 2026-07-13 09:57:35 +02:00
Matt Merhar 2221f0fa32 Add SFP quirk for devices that misreport DDM capability 
On a QSFPTEK QT-SFP+-T (RTL8261C) 10GBase-T module, the diag type field
(92) comes back as 0x00, but there's actually some statistics available
like temperature. Other metrics may be hard-coded values.

Add a basic struct that allows matching on vendor and/or model, using a
bitfield to allow multiple quirks for a given SFP module. Only
SFP_QUIRK_DDM is implemented.

For modules matching SFP_QUIRK_DDM, attempt an I2C read of the MSB of
module voltage during probe if DDM is "unsupported" - if it's not 0xff,
override the reported options so we can pull the diagnostic data.

To allow simpler comparisons, convert the ASCII fields (vendor,
model, serial) from space-padded to standard NULL-terminated strings.

strcmp() is moved from httpd.c to rtlplayground.c alongside other string
functions and shared between them.

The __reentrant keyword is used for the new functions to avoid using up
additional OSEG space. This allocates the variables on the stack, which
is OK for this particular code path.

The JSON assembly in send_status() is slightly modified to treat the
sfp_module_* data as standard NULL-terminated strings, and a repeated
subtraction was moved into a uint8_t to declutter the code.
 2026-07-13 01:31:29 -04:00
logicog f86b8f32de Merge pull request #283 from Lynn-Becky/translate/chinese 
Translate to Chinese
 2026-07-13 07:15:52 +02:00
logicog 9389db9e9b Merge pull request #284 from eraiza0816/feature-translate 
fix: rename local variable to avoid shadowing global translation
 2026-07-13 07:15:29 +02:00
Your Name 519c3a8df3 fix: rename local variable to avoid shadowing global translation function 2026-07-10 13:09:41 +09:00
Lynn-Becky 64422367d5 feat(translate):translate to Chinese 2026-07-08 20:40:00 +08:00
logicog dc2b03e331 Merge pull request #279 from eraiza0816/translate-japanese 
Support i18n & translate japanese
 2026-07-07 19:28:19 +02:00
Your Name fcf1b3c310 Fix: Remove the language-specific display logic. 2026-07-05 02:31:37 +09:00
Your Name 1dd6156a1f add: how to support i18n 2026-07-05 01:09:50 +09:00
Your Name e75a4c2a95 support i18n & translate japanese 2026-07-05 00:51:27 +09:00
René van Dorst 05d8c36afe Merge pull request #278 from eraiza0816/update-docs-SWTG024AS 
update document: SKS3200M-4GPY2XF flash size
 2026-07-04 12:47:04 +00:00
René van Dorst b6c9eaf00f Merge pull request #275 from riker77/mokerlink-2G040210GSM 
Add Mokerlink 2G040210GSM (2M-PCB43-V1.1)
 2026-07-04 12:45:47 +00:00
Your Name ecf5f47960 update SKS3200M-4GPY2XF flash size 2026-07-04 15:52:25 +09:00
Ron ebf6ed7526 Update 2M-PCB43-V1.1.md 
Add hint to use KP_9000_6XHML_X2 as a compatible machine definition.
 2026-06-29 20:30:07 +02:00
riker77 96f2c860fc Add Mokerlink 2G040210GSM (2M-PCB43-V1.1) 2026-06-29 17:57:09 +02:00
feelfree69 b80d46955c Merge pull request #274 from Lynn-Becky/feat/PCB-SWTG024AS-V2.0 
fix(machine): move SWTG024AS-specific SDS0 setup to machine.c
 2026-06-28 21:32:53 +02:00
Lynn-Becky 0a18c64dcc fix(machine): move SWTG024AS-specific SDS0 setup to machine.c 2026-06-28 22:47:33 +08:00
René van Dorst b53c56e7f6 Merge pull request #273 from Lynn-Becky/feat/PCB-SWTG024AS-V2.0 
fix(machine): SWTG024AS V2.0 fix 5th RJ45 port
 2026-06-27 19:50:05 +00:00
Lynn-Becky 17d41b53b7 update doc 2026-06-28 00:56:50 +08:00
Lynn-Becky bd98cb0312 fix(machine): SWTG024AS V2.0 fix 5th RJ45 port 2026-06-28 00:48:05 +08:00
René van Dorst 5566d71522 Merge pull request #272 from Lynn-Becky/feat/PCB-SWTG024AS-V2.0 
fix(SWTG024AS-V2.0): correct SFP port GPIO assignments
 2026-06-27 13:33:29 +00:00
Lynn-Becky 5e1396cc42 fix(machine): correct SFP port GPIO assignments 2026-06-27 21:16:47 +08:00
René van Dorst 7fe0678c92 Merge pull request #271 from th0m4sek/main 
Add reset button gpio to SWTG018AS-A V2.0
 2026-06-25 18:33:18 +00:00
th0m4sek 7ec25a39a2 Add brands information for SWTG018AS-A V2.0 
Added brands section with details for Ampcom and Horaco.
 2026-06-25 20:23:54 +02:00
th0m4sek 98e3cde2f5 Update reset_pin on SWTG018AS-A V2.0 2026-06-25 20:16:56 +02:00
René van Dorst d90c02f951 Merge pull request #268 from th0m4sek/main 
Table with supported devices
 2026-06-23 17:40:51 +00:00
th0m4sek bbb92c86db Fix formatting issue in supported_devices.md 2026-06-23 09:16:05 +02:00
René van Dorst 1635236a05 Merge pull request #266 from hlyi/pr-tool 
Tools for detecting GPIO mapping and extracting LED configure
 2026-06-23 06:28:38 +00:00
th0m4sek 5e3a280b5c Update supported devices list with new entries 2026-06-23 07:26:35 +02:00
HL Yi a56e2a419b sleep-interval default value is reduced to 1. 
i2c-bus is required argument
replace --bus with --i2c-bus for i2c_dump_rtl_regs.py for better consistency
format lint clean up
 2026-06-22 18:02:34 -05:00
th0m4sek 9c01227572 Fix typo in device manufacturer name from 'Haraco' to 'Horaco' 2026-06-22 23:21:13 +02:00
th0m4sek 6d37a47481 Rename Horaco SWTGW215AS to HC-SWTGW218AS 2026-06-22 23:18:42 +02:00
th0m4sek 87b9e59cdb Update ZX-SWTG124AS entry with new data 2026-06-22 22:47:02 +02:00
th0m4sek 0e86b84efa Add Ports column to supported devices list 
Updated the supported devices table to include Ports column and adjusted device details.
 2026-06-22 22:45:20 +02:00
René van Dorst bd595b7f94 Merge pull request #263 from Lynn-Becky/feat/PCB-SWTG024AS-V2.0 
Add PCB-SWTG024AS V2.0 (Unmanaged)
 2026-06-22 19:27:38 +00:00
Lynn-Becky 06d4a3504a Add LED status comments,try to fix 5th rj45 2026-06-23 00:42:31 +08:00
Lynn-Becky d68534e833 update PCB-SWTG024AS-V2.0 to SWTG024AS-V2.0 2026-06-22 23:51:57 +08:00
Lynn-Becky e0356bd751 Add SWTG024AS-V2.0 doc and photo 2026-06-22 22:24:46 +08:00
HL Yi 4b770a8abc Fixed document based upon vDorst 
Expand ignore IO list to the GPIOs related to SYS_LED, UART, SMI, and SPI
 2026-06-22 07:08:19 -05:00
th0m4sek 709436ca13 Update supported devices list 
Added new device 'Keeplink KP-9000-6XH-X2' and removed duplicate 'Horaco SWTGW215AS' entry.
 2026-06-22 12:08:52 +02:00
th0m4sek 28856ef495 Revise supported devices documentation 
Updated the supported devices list with new entries and details.
 2026-06-22 12:07:30 +02:00
th0m4sek 113bb654aa Add links to PCB documentation for supported devices 
Updated device entries with links to detailed PCB documentation.
 2026-06-22 11:14:04 +02:00
th0m4sek efc1883685 Table with supported devices 
Added a table listing supported hardware devices with details.
 2026-06-22 10:38:40 +02:00
feelfree69 72921ba3be Merge pull request #267 from hlyi/pr-doc 
add SKS3200-8E1X to SWTGW218AS.md doc
 2026-06-22 08:00:46 +02:00
HL Yi 70be673fca updates based upon vDorst's feedback. 
change i2c_read_rtl_gpio sleep tiemr to 1s
update README.md
Sorted port speed
 2026-06-22 00:18:32 -05:00
HL Yi bf5205258e add SKS3200-8E1X to SWTGW218AS.md doc 2026-06-21 17:24:02 -05:00
René van Dorst 98ddb0bb29 Merge pull request #253 from Erdnusschokolade/fix/vlan-mgmt-filter 
Fix conf_overwrite filter removing vlan mgmt entries
 2026-06-21 18:52:59 +00:00
HL Yi d152f89549 remove redundant code 2026-06-21 13:22:54 -05:00
HL Yi c61e94527e add clarification for firmware requirement 2026-06-21 13:21:06 -05:00
HL Yi f76ccaf3d8 add disclaim that tool tested in linux 2026-06-21 13:08:58 -05:00
HL Yi ebc6cd06ad add utilities for led and gpio dump and detection 2026-06-21 13:04:04 -05:00
Lynn-Becky 017aaf71d6 Add PCB-SWTG024AS V2.0 machine target 2026-06-21 01:15:34 +08:00
Erdnusschokolade 4eaf16f96d Drop dead exact-match check in vlan delete filter 
A bare "vlan N" line never matches conf_cmds (a VLAN entry always carries
a member port or the mgmt/name keyword), so it is never stored. The
c !== "vlan N" comparison could therefore never match an entry; the
startsWith(prefix) check alone covers all stored vlan lines.
 2026-06-20 08:13:43 +02:00
Erdnusschokolade 718745e7b5 Reduce stale management VLAN entries on config save 
The firmware has a single management VLAN (one management_vlan variable),
so a stored config should never carry more than one "vlan N mgmt" line.
When parsing a mgmt command, drop any previously stored mgmt entry so
repeatedly changing the management VLAN no longer accumulates stale lines.
 2026-06-20 08:00:54 +02:00
Erdnusschokolade 06ee1ce38e Persist port speed settings in config parser 
parseConf() only recognized "port N name" in conf_cmds, so "port N <speed>"
lines were treated as unknown commands and dropped on save - configured port
speeds never persisted.

Add the speed command (incl. optional half/full duplex suffix) to conf_cmds,
add a "port N" entry to conf_overwrite so re-saving a speed replaces the
previous value, and guard the per-port name entry so changing a port's speed
no longer wipes its configured name.
 2026-06-18 14:49:56 +02:00
René van Dorst f122402bdd Merge pull request #259 from logicog/rtl8221b_100m_support 
Add support for 100M on RTL8221B ports
 2026-06-15 17:54:03 +00:00
logicog 842d68af97 Add support for 100M on RTL8221B ports 2026-06-15 18:40:03 +02:00
logicog bfd1ce9183 Merge pull request #209 from hlyi/pr 
Add Steamemo IG204 V1 support
 2026-06-12 17:35:17 +02:00
feelfree69 4ed6575a87 Merge branch 'main' into pr 2026-06-10 08:40:35 +02:00
feelfree69 1b1c656404 Merge pull request #215 from logicog/2x10g 
Add  ZX310S-4T2XT device support
 2026-06-10 08:21:48 +02:00
logicog 018eab9810 Also display RTL837X_REG_LED_MODE 2026-06-10 05:45:19 +02:00
logicog ec36658ab9 Add ZX310S-4T2XT device photos 2026-06-10 05:45:19 +02:00
logicog eeded0f788 Add (Horaco) ZX310S-4T2XT 
The ZX310S-4T2XT is a managed device with 2x2.5GBit and 2x10GBit Ethernet.
It is sold, among others, by Horaco as an unbranded device.

CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV (U3)
PHY 2x RTL8261BE
 2026-06-10 05:45:19 +02:00
logicog 8f3b738e59 Merge pull request #257 from logicog/revert-252-main 
Revert "Don't disable flash DIO operation before flashing"
 2026-06-07 10:47:10 +02:00
TylerDurden-23 62065875e3 Revert "Don't disable flash DIO operation before flashing" 2026-06-07 10:42:39 +02:00
HL Yi e7f70a724b add doc for STEAMEMO_IG204_V1 2026-06-05 20:05:26 -05:00
HL Yi d7a7bdac7e add support of STEAMEMO_IG204_V1 2026-06-05 18:32:22 -05:00
René van Dorst 94e34a5991 Merge pull request #251 from feelfree69/make 
make: seperate output directories by MACHINE
 2026-06-05 19:16:04 +00:00
René van Dorst b58b1dfb35 Merge pull request #252 from feelfree69/main 
Don't disable flash DIO operation before flashing
 2026-06-05 19:13:30 +00:00
Erdnusschokolade 592b903305 Fix conf_overwrite filter removing vlan mgmt entries 
The vlan/mgmt lookahead split (commit dcc60c3) correctly separated the
patterns so that `vlan N mgmt` and `vlan N <members>` match different
conf_overwrite entries. But the filter that applies the overwrite still
used `item.startsWith(matchStr + " ")` with matchStr = "vlan N", which
also matches "vlan N mgmt" — so the management entry was removed whenever
the VLAN's membership definition was re-saved.

Example: with both `vlan 44 management 2t 4t 5 6t` and `vlan 44 mgmt`
in the config, changing the membership dropped `vlan 44 mgmt` entirely.

Added a `!item.endsWith(" mgmt")` guard so management entries survive the
filter. No reordering is needed: `vlan N mgmt` only sets the global
management_vlan variable (cmd_parser.c) and does not depend on the VLAN
table entry existing, so its position in the config is irrelevant.
 2026-06-02 22:52:06 +02:00
feelfree69 4ca5b4e87a Don't disable flash DIO operation before flashing - it works fine with DIO 2026-06-01 15:07:37 +02:00
logicog 5a8a8ed91b Merge pull request #237 from Erdnusschokolade/fix/config-persistence 
Fix config persistence: missing commands, delete handling, multipart upload
 2026-06-01 06:46:11 +02:00
René van Dorst ad64e450e1 Merge pull request #246 from logicog/sfp_speed 
Add support for configuring SFP modules speeds via CLI
 2026-05-31 18:33:05 +00:00
feelfree69 cfeffc434d Merge pull request #248 from zectaiga/swtg024as-a-2-0-1-fixes 
Fix SWTG024AS-A 2.0.1 port and LED mapping
 2026-05-31 10:42:01 +02:00
feelfree69 8670709b6e make: seperate output directories by MACHINE 2026-05-31 01:17:33 +02:00
logicog 1a457c29ac Add support for 100FX modules and forcing 100FX 2026-05-30 23:08:44 +02:00
logicog ce496ab25f Merge pull request #249 from vDorst/fix_led_settings 
Fix SFP led for 2.5gbit for MACHINE_SWGT024_V2_0
 2026-05-30 22:07:56 +02:00
René van Dorst 964ef2da7a Fix SFP led for 2.5gbit for MACHINE_SWGT024_V2_0 
While testing #246, I noticd that SFP did not light-up while forcing
2.5gbit link. This is because RJ45 and SFP share the same LED-settings.
But RJ45 has two leds-settings.
Solution is to add settings for SFP for both managed and unmanaged
variant.
 2026-05-30 21:02:42 +02:00
logicog 8c61010a84 Add support for configuring SFP modules speeds 2026-05-29 20:46:08 +02:00
Taiga Ogawa 053dbe286e Fix SWTG024AS-A 2.0.1 port and LED mapping 2026-05-30 03:44:15 +09:00
feelfree69 e68e5cef46 Merge pull request #244 from kekopop/main 
Add PCB-SWTG024AS-A-V2.0.1
 2026-05-26 22:15:21 +02:00
kekopop b5543b6aeb Update machine.c 2026-05-26 22:04:26 +02:00
kekopop a51fcf1478 Update machine.h 2026-05-26 22:03:42 +02:00
kekopop 247cb4dd2f Add files via upload 2026-05-26 19:44:31 +02:00
logicog 394fc99485 Merge pull request #242 from tofurky/fix_xgspon_rates 
Broaden range of SFP+ rates mapped to SDS_10GR
 2026-05-26 05:32:54 +02:00
logicog cf0707475d Merge pull request #241 from tofurky/regset_arg_count 
Correct argument count for regset command
 2026-05-26 05:25:22 +02:00
Matt Merhar 73b99b2f08 Broaden range of SFP+ rates mapped to SDS_10GR 
A commonly used SFP+ form-factor XGS-PON ONT (WAS-110) reports 0x63 at
power on and then switches to 0x64 after booting up.

0x63 -> 9.9gbps
0x64 -> 10gbps

These are outside of the previous 0x66-0x69 range which prevented the
link from ever being brought up.
 2026-05-25 21:45:42 -04:00
Matt Merhar 005eaa3248 Correct argument count for regset command 
Fixes: 2cdab5f9d9 ("parse_reg{set,get}() make use cmd_words_len.")
 2026-05-25 20:24:27 -04:00
feelfree69 98f1e9443a Merge pull request #239 from amstan/ztyuav 
doc: Describe other PCB-K0402WS-V3.0 devices
 2026-05-25 23:23:16 +02:00
feelfree69 4c2be334d5 Merge pull request #233 from Erdnusschokolade/feature/vlan-overview 
Add VLAN selector dropdown and overview table to vlan.html
 2026-05-25 12:30:30 +02:00
Alexandru M Stan 073cc1e4a4 doc: Describe other PCB-K0402WS-V3.0 devices 
I recently brought a "Ztyuav Z-QWYT0402", the insides looked identical to the
existing supported "Hisource Hi-K0402WS". Both of them have the
"PCB-K0402-V3.0" silkscreen.

I flashed the vanilla image and it seems to work great.

I changed the documentation to be more inclusive of other devices (including
adding a picture of mine). I suspect more devices might fall into this
"PCB-K0402-V3.0" bucket, for example the "YuanLey YS25-0402" with
the vlan switch also looks suspiciously identical from the outside.

I also added some details I noticed while flashing mine:
teardown, flash padding, how the selector switch actually works.
 2026-05-24 18:33:23 -07:00
Erdnusschokolade ba919280ac Address PR #233 review feedback 
- itoa16_html: add comment that the function is sufficient for VLAN
  IDs (<=4094); generalization not needed.
- send_vlanlist: replace post-write bounds check with a pre-write
  guard using worst-case entry size (138 bytes + 1 for closing
  bracket). Old comment claimed ~45 bytes per entry, which only
  held for short names. With a 117-char name (the actual bound from
  CMD_BUF_SIZE) entries can reach 138 bytes, and the post-check
  would not have prevented an overflow.
- Document the 0x02 check in sfr_data[0] as the VLAN table entry
  valid flag.
 2026-05-24 23:31:18 +02:00
Erdnusschokolade dcc60c3824 Fix conf_overwrite vlan/mgmt conflict 
The pattern /^vlan\s+\d{1,4}\b/ matched both VLAN membership entries
(vlan N <ports>) and management entries (vlan N mgmt), causing them
to overwrite each other in configuration[]. When saving, whichever
form came last in the cmd_log would dedupe the other out of the
final config — resulting in either lost membership or a stale mgmt
setting.

Split into two patterns using negative lookahead:
- /^vlan\s+\d{1,4}\s+mgmt$/      matches only mgmt entries
- /^vlan\s+\d{1,4}(?!\s+mgmt\b)/  matches everything else

Both dedup independently. Discovered via hardware test on 6XH-X
where 'vlan 44 mgmt' silently dropped 'vlan 44 management 2t 5u'
from saved config, locking out web UI on next boot.
 2026-05-24 11:26:04 +02:00
Erdnusschokolade caad366b3b Fix config persistence: missing commands, delete handling, multipart 
Multiple related bugs in the Save-to-Flash path:

1. Multipart upload was missing the required filename argument,
   causing the backend parser to fail. Added 'config.txt' to the
   form.append call. This was likely the primary reason Save-to-Flash
   was unreliable.

2. Web UI was not pausing its polling interval during flash write,
   causing CPU contention and intermittent crashes. Added isSaving
   lock and clearInterval before sendConfig.

3. conf_cmds whitelist was incomplete. Added: syslog, passwd, pvid,
   ingress, port name, lag, laghash, isolate, stp, igmp, mtu, bw,
   vlan N mgmt, vlan N d.

4. VLAN regex blocked named VLANs. New pattern allows optional name
   (starts with letter, matching CLI parser semantics).

5. vlan N d (delete) was not persisted. parseConf now removes the
   matching vlan N ... entry from configuration[] when seeing a
   delete command, without storing the delete itself. Result: the
   saved config describes the end state.

6. configuration[] was not cleared between flashSave invocations,
   leading to stale entries from prior interactions.

7. conf_overwrite boundary fix: 'pvid 1' no longer matches 'pvid 10'
   etc. Added trailing space in startsWith check.

8. All conf_cmds patterns now anchored with ^...$ for full-line
   match. parseConf normalizes whitespace before testing.

9. Port range widened to \d{1,2} so ports 11+ are accepted.

Structural fixes (1, 2, 6, 7, 8) ported from mcaptur's closed PR #219;
remaining fixes (3, 4, 5, 9) and overall regex strategy are new.
 2026-05-24 11:26:04 +02:00
Erdnusschokolade ce0ee859d6 Fix: Untagged Ports column included non-member ports 
The hardware bitmask format encodes both "untagged members" and
"non-members" in the upper 10 bits (per doc/vlan.md). The existing
fetchVLAN() correctly masks this with the membership bitmask before
display, but loadVlanTable() did not, causing non-member ports to
appear in the Untagged Ports column.

Tested on KeepLiNK KP-9000-6XH-X.
 2026-05-24 11:20:57 +02:00
Erdnusschokolade a369e46fe6 Add VLAN overview table to VLAN configuration page 
Below the configuration form, a new table lists all configured VLANs
with their port memberships: Member, Tagged, Untagged, and PVID
columns. Port ranges are formatted compactly (e.g. "1-2,5").

Port-to-bit mapping uses the existing physToLogPort[] array populated
by /status.json, so the table is consistent with the icon view in
fetchVLAN() and works on any supported machine.

Each row has a delete button that sends "vlan N d" via /cmd, with
a confirmation dialog. VLAN 1 cannot be deleted (no button shown).

Table and dropdown both refresh automatically after Update/Create
and after delete via a new refreshVlanViews() helper.

The N+1 request pattern (1x /vlanlist + Nx /vlan.json) keeps the
backend simple and avoids buffer overflow risks for systems with
many VLANs. For typical configurations (<50 VLANs), page load
remains under one second.
 2026-05-24 11:20:57 +02:00
Erdnusschokolade defb37c06a Add VLAN selector dropdown to VLAN configuration page 
A new <select> element above the VLAN ID input lets users pick an
existing VLAN by name instead of typing the ID. Options are loaded
from /vlanlist on page load and re-loaded after successful
Update/Create operations.

Selection triggers the existing fetchVLAN() flow.

Falls back gracefully if /vlanlist returns an empty list or fails:
the dropdown is hidden and the existing ID input remains functional.
 2026-05-24 11:20:57 +02:00
Erdnusschokolade a5f77e4caf Add /vlanlist HTTP endpoint 
Returns a JSON array of all configured VLANs with their IDs and names,
e.g. [{"id":1,"name":""},{"id":20,"name":"IoT"}].

The endpoint iterates VLAN IDs 1..4094 and filters by the validity bit
in sfr_data[0] (0x02), following the same pattern as vlan_create() and
vlan_setup() in rtl837x_port.c.

Also adds a small itoa16_html() helper for emitting decimal numbers
up to 4 digits (analogous to the existing 8-bit itoa_html()), used
for VLAN IDs which can reach 4094. Response builder uses the existing
vlan_name() helper for the name lookup, consistent with send_vlan().

Buffer overflow is prevented by breaking out of the iteration loop at
TCP_OUTBUF_SIZE - 60.

This endpoint is the foundation for upcoming UI improvements
(VLAN selector dropdown and overview table).
 2026-05-24 11:20:57 +02:00
logicog 1311cb9ea9 Merge pull request #232 from Erdnusschokolade/fix/vlan-name-rename 
Fix VLAN name persistence across rename and delete operations
 2026-05-23 12:47:06 +02:00
Erdnusschokoladeandlogicog 7d0d8525d2 Fix two OOB reads in parse_vlan() 
1. While loop scanning VLAN name terminated only on ' ', not '\0'.
   When the name is the last token in cmd_buffer, the loop reads past
   the buffer into adjacent XRAM.

2. Entering 'vlan' without arguments causes parse_vlan() to read
   cmd_words_b[1] which points to undefined memory, causing atoi_short()
   to interpret residual bytes from previous commands as a VLAN ID.
   Bug found and fix proposed by logicog during review of PR #232.

Co-Authored-By: logicog <logicog@users.noreply.github.com>
 2026-05-23 11:19:42 +02:00
logicog 201289990b Merge pull request #236 from Erdnusschokolade/doc/vlan-mgmt-command 
doc: document vlan <id> mgmt command
 2026-05-23 07:31:39 +02:00
Erdnusschokolade 3a93ce1786 doc: document vlan <id> mgmt command 
Adds CLI reference for the previously undocumented vlan <id> mgmt
command, including the disable case (vlan 0 mgmt), default state,
and a lockout warning.

Fixes #235
 2026-05-23 00:26:13 +02:00
René van Dorst 4b42be8cae Merge pull request #234 from logicog/fix_duplex 
Fix duplex setting on the CLI
 2026-05-22 19:38:33 +00:00
logicog 32f9b91def Fix duplex setting on the CLI 
Fixes commands such as
> port 1 duplex half
 2026-05-22 21:07:29 +02:00
Erdnusschokolade 21f33abfa7 Fix VLAN name persistence across rename and delete operations 
Previously, renaming a VLAN or deleting and recreating it with a
different name did not update the displayed name. The vlan_names[]
array is an append-only buffer where vlan_name() returns the first
matching entry, so stale entries kept winning.

This commit adds vlan_name_remove(), which locates an entry by
VLAN ID and removes it via array compaction. The function is called
in two places:

  - parse_vlan() in cmd_parser.c, before appending a new name entry,
    to remove any pre-existing entry for the same VLAN ID
  - vlan_delete() in rtl837x_port.c, to clean up the name when a
    VLAN is removed

The implementation reuses the existing vlan_name() lookup, scans for
the trailing space of the matched entry, then shifts remaining bytes
left. Locals are declared as static __xdata to avoid the SDCC
overlay segment limit on banked functions.

Tested on KeepLiNK KP-9000-6XH-X:
  - vlan 99 AAA p1u; vlan 99 BBB -> name updated to BBB
  - vlan 99 d; vlan 99 CCC p1u   -> name correctly CCC, not stale AAA

Note: This fix addresses the runtime XMEM state. Persistence of
renamed VLAN names across reboot requires the user to download and
re-upload /config, as is the existing pattern for all configuration
changes in this firmware.
 2026-05-21 17:39:29 +02:00
René van Dorst d253c9feee Merge pull request #231 from xristos-sk/fix-rtl837x_stp-bug,-cmpMac-always-0-when-checking-for-new-root 
fix: rtl837x_stp bug, cmpMac always 0 when checking for new root
 2026-05-19 19:57:45 +00:00
sk_thes 2552f586d8 fix: rtl837x_stp bug, cmpMac always 0 when checking for new root 
When checking for a new root, a root_bridge with the same priority as STP_I will never be adopted as cmpMAC always returns 0.

This PR fixes this bug by changing the comparison of MACs to what was intended
 2026-05-18 22:47:31 +00:00
logicog f113b2c0e5 Merge pull request #230 from vDorst/refactor_is_word 
Refactor is_word() and is_word_x()
 2026-05-18 18:31:17 +02:00
logicog 2d912d80c9 Merge pull request #229 from vDorst/fix_login 
Fix and refactor is_url_word_x()
 2026-05-18 18:30:28 +02:00
logicog 0682df3027 Merge pull request #226 from UAb5eSMn/execute_commands 
Support for executing multiple commands via /cmd
 2026-05-18 18:29:55 +02:00
René van Dorst 4b40efafbb Fix and refactor is_url_word_x(). 
With content_type = "application/x-www-form-urlencoded", "+" means space.
This case was not handled.

Also refactor the code to make a loop to process the hex digits.
 2026-05-17 21:23:35 +02:00
René van Dorst 02992771ad change is_word_x() return type from char to bool. 
Saves 10 bytes.
 2026-05-17 21:15:39 +02:00
René van Dorst f81c497728 refactor is_word_x() 
Saved 22 bytes.
 2026-05-17 21:13:07 +02:00
René van Dorst b46cc2087f change is_word() return type from char to bool. 
Saves 52 bytes.
 2026-05-17 21:12:57 +02:00
René van Dorst 3904daced7 refactor is_word() 
Saved 23 bytes.
 2026-05-17 19:14:27 +02:00
René van Dorst 623247da4f httpd: Added extra content_type check for login. 
Ensure login content_type is "application/x-www-form-urlencoded".
 2026-05-17 17:17:15 +02:00
René van Dorst aa5368cf34 Merge pull request #228 from zectaiga/add-fns1200p 
Add support for FOXNEO FNS-1200P (RTL8372, 4x2.5G PoE+ + 2x SFP+)
 2026-05-17 11:58:18 +00:00
René van Dorst 2b39d723c7 Merge pull request #225 from orbisai0security/fix-v010-firmware-upload-auth-integrity 
fix: authenticate config upload before flash erase and abort failed firmware CRC
 2026-05-17 11:52:22 +00:00
Taiga Ogawa f6cb1152f9 Add support for FOXNEO FNS-1200P (RTL8372, 4x2.5G PoE+ + 2x SFP+) 
- machine.c/h: add MACHINE_FNS1200P with verified GPIO assignments for
  both SFP ports, LED SET0 (amber 2.5G / green 1G-100M-10M) and SET1
  (SFP all-speeds), led_mux from original firmware register dump, and
  machine_custom_init() enabling LED_GLB_IO_EN bit 6
- doc/devices/FNS-1200P.md: device overview, port layout, serial
  console (S1 three through-holes = UART0 115200 8N1 3.3V),
  LED and SFP GPIO tables
- doc/devices/photos/FNS-1200P/: chassis front panel and PCB top photos
- doc/supported_devices.md: add FNS-1200P to the list

GPIO assignments and LED register values were cross-checked between
live GPIO observation (RTLPlayground gpio command) and an original
firmware register dump.
 2026-05-16 17:53:32 +09:00
René van Dorst bf9fa35338 Merge pull request #224 from logicog/fix_passwd 
Add URL decoding for password comparison.
 2026-05-15 20:04:15 +00:00
logicog 8ab2a6a9da Add URL decoding for password comparison. 2026-05-15 16:04:48 +02:00
UAb5eSMn 2316ffd493 Support for executing multiple commands via /cmd 2026-05-15 13:27:09 +02:00
orbisai0security a71eb57702 fix: V-010 security vulnerability 
Automated security fix generated by Orbis Security AI
 2026-05-15 02:46:09 +00:00
René van Dorst a2b2dbcfbf Merge pull request #221 from feelfree69/kp9000 
Adding Keeplink KP-9000-6XH-X2
 2026-05-15 02:08:42 +00:00
feelfree69 8cee16e96b add documentation for KP-9000-6XH-X2.md 2026-05-10 12:20:04 +02:00
feelfree69 a1135863bb add MACHINE_KP_9000_6XH_X2 2026-05-10 12:16:48 +02:00
dobodu ede4137101 Revise compiling section and add cautionary notes since #193 (#211) 
* Revise compiling section and add cautionary notes

Updated compiling instructions and added warnings about flashing procedures.

* Refactor caution messages in README.md

Updated caution messages to use new formatting for emphasis.

* Revise caution and reminder notes in README

Updated caution and reminder sections for clarity and consistency.

* Fix typos in README regarding firmware update

Corrected typo errors in the README.

* Add image for advanced settings

Add advanced_seetings.png

* Add advanced settings configuration details to README

Added advanced settings section with configuration instructions.

* Fix image source in README for advanced settings

Corrected the image source filename for advanced settings.

* Revise IP and port command descriptions in README

Updated command descriptions in README for clarity.

* Revise README.md for clarity and updated instructions

Updated sections in README.md for clarity and accuracy, including compiling requirements, installation instructions, and cautionary notes.

* Revise README for clarity and emphasis

Updated formatting and emphasized important notes in the README.

* Correct image file name and compilation output in README

Updated README to reflect changes in image file names and compilation output.
 2026-05-08 08:32:07 +02:00
logicog 0106f99ee0 Merge pull request #214 from feelfree69/flash_erase 
Erase flash before writing upload image
 2026-05-08 08:30:45 +02:00
logicog 733348059d Merge pull request #217 from mcaptur/main 
Hi-Source HI-k0801WS - deleted a line by mistake
 2026-05-08 08:27:12 +02:00
Mark Captur 950b763d69 Hi-Source HI-k0801WS - deleted a line by mistake 2026-05-08 07:38:43 +02:00
feelfree69 22aaa9fbfe Renamed and moved FLASH_PAGE_SIZE; added compile-time check 2026-05-08 07:13:41 +02:00
logicog 89e22f0893 Merge pull request #216 from mcaptur/main 
Add hardware profile and LED fix for Hi-Source HI-k0801WS
 2026-05-08 06:40:29 +02:00
Mark Captur 809efaa8d8 Hi-Source HI-k0801WS 2026-05-08 06:11:43 +02:00
Mark Captur 271878a62f Hi-Source HI-k0801WS 2026-05-08 06:09:17 +02:00
Mark Captur 299b54f2a3 Add pics for Hi-Source HI-k0801WS 2026-05-08 06:03:15 +02:00
Mark Captur f47fec7098 Add pics for Hi-Source HI-k0801WS 2026-05-08 06:02:21 +02:00
Mark Captur 04ce2cb8a1 Add doc for Hi-Source HI-k0801WS 2026-05-08 05:53:04 +02:00
Mark Captur 96eddf5a0c Add hardware profile and LED fix for Hi-Source HI-k0801WS 2026-05-07 16:06:00 +02:00
logicog 2cd6f5d782 Merge pull request #212 from feelfree69/make 
Makefile: Improve filenames of images
 2026-05-04 07:55:54 +02:00
feelfree69 c6dc5cc21c Don't delete *.bin files on 'make clean' - 'make distclean' does this 2026-05-04 07:11:44 +02:00
feelfree69 502033590e untracked files don't mark a build as -dirty 2026-05-04 06:55:11 +02:00
feelfree69 f81529bd07 Merge pull request #210 from logicog/fix_chrome_uploads 
Fix chrome uploads
 2026-05-03 16:53:48 +02:00
feelfree69 9714818b1f Erase flash before writing upload image 2026-05-03 15:55:36 +02:00
logicog 9c668969d4 Fix POST upload request handling for Chrome browser 
Chrome sends upload requests using POST with multipart/form-data
content type in multiple packets for the header part of the form-data.

Introduce a TSTATE_MULTIPART for the httpd server states that denotes
that so far only a part of the multipart header has been transmitted.
Once the full header has been transmitted, we change to TSTATE_POST
as for Firefox which sends all the multipart header in one piece.

The main further change required then is to make sure that the parsing
of the initial part of the multipart request is only parsed once and initially
to distinguish between configuration and firmware uploads.
 2026-05-03 08:16:55 +02:00
feelfree69 241bcb273f rename output of installer-Makefile to rtlplayground_oem_upgrade.bin 2026-05-02 21:45:39 +02:00
feelfree69 10367d0cdb Use a revision- and MACHINE-dependent output-filename 2026-05-02 21:44:44 +02:00
René van Dorst 09d90d6d97 Merge pull request #175 from logicog/ZX310S-4T2XH 
10GBit Ethernet Switch support (Horaco ZX310S-4T2XH)
 2026-05-02 17:22:52 +00:00
logicog 12c98ba6bd Merge pull request #148 from feelfree69/syslog 
Syslog: Duplicates console output to remote syslog server; Web-Interface: Send console commands to device
 2026-04-27 20:30:39 +02:00
feelfree69 3f66a18104 Merge branch 'main' into syslog 2026-04-24 12:01:30 +02:00
logicog 8abbececd1 Add device description for ZX310S-4T2XH 2026-04-24 10:53:05 +02:00
logicog d6dbf4e4dd Add photos of ZX310S-4T2XH 2026-04-24 10:53:05 +02:00
logicog e2b3201c9f Add machine name for ZX310S-4T2XH 2026-04-24 10:53:05 +02:00
logicog a7f4543698 Add support for (Horaco) ZX310S-4T2XH 
Add support for the ZX310S-4T2XH switch, which is a 4x2.5GBit + 1x10GBit + SFP
device. The device does not have any branding and is sold under different
brand names, in particular by Horaco. There is no branding on either label
nor PCB.

CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV
10GBit PHY: RTL8261BE

UART header present, but solder holes are filled with solder that needs
removal, first, e.g with a 1.2mm drill.

The original firmware uses 57600baud 8N1
 2026-04-24 10:53:05 +02:00
logicog 2e0e55967c Do not send SFP info if no SFP port present 2026-04-24 10:53:05 +02:00
logicog 7877ce60f3 Add support for 5G link speeds, make 5G/10G LED blue 2026-04-24 10:53:05 +02:00
logicog a3dd25e0fe Add SDS parameter for RTL8261 setup 2026-04-24 10:53:05 +02:00
logicog 441340a4d4 Add SMI configuration support for dual 10G Ethernet 2026-04-24 10:53:05 +02:00
logicog 9a3f8c359d Enable 10g EEE on init 2026-04-24 10:53:05 +02:00
logicog 63ab6500c0 Add 10G/5G speed configuration/display 2026-04-24 10:53:05 +02:00
logicog ec5f74bbed Add is10g_port field in phy_settings 2026-04-24 10:53:05 +02:00
logicog a597d2d08b Fix EEE control register address and add 5G/10G EEE defines 
Register RTL8373_EEE_CTRL_BASE did not actually exist at 0x606c,
instead RTL837X_EEE_STATUS is actually not only a status, but also
a control register for EEE enable/disable at the MAC.

The defines are not actually register bits, but port EEE settings,
so move them to rtl837x_port.h while adding 5G/10G flags.
 2026-04-24 10:53:05 +02:00
logicog abc9cb7afd Add 5G speed display support and 5/10G EEE display/settings 2026-04-24 10:53:05 +02:00
logicog 6d579c4f00 Add speed bits for 5G/10G EEE 2026-04-24 10:53:05 +02:00
logicog c342964327 Add SDS init for RTL8261BE connection 2026-04-24 10:53:05 +02:00
logicog fd3a272255 Add RTL8261BE PHY configuration 
Add configuration of the RTL8261BE PHY on startup.
 2026-04-24 10:52:24 +02:00
logicog 4f4f69ecc1 Handle RTL8261BE SerDes configuration 
The RTL8261BE uses a 10GBit QSGMII connection. Add handler for initial
configuration of the SerDes speed and upon link changes.
 2026-04-24 10:52:24 +02:00
logicog c8e21b394b Add forgotten register RTL837X_REG_LED3_2_SET3 
The register had been forgotten in the LED configuration registers,
add the register definition and print out the content in leds_dump().
 2026-04-24 10:50:53 +02:00
logicog c34249b90a Add n_10g property in machine structure 
This uint8_t field corresponds to the n_sfp field and gives the number
of 10G ports for the machine. The values can be 0, 1, 2 for known machines,
all currently supported machines do not have any 10G ports, so no
need to change any entries in machine.c
 2026-04-24 10:50:53 +02:00
René van Dorst 042f4324a4 Merge pull request #166 from logicog/frame_header 
Cleanup Frame header structures and fix management VLAN
 2026-04-24 06:53:07 +00:00
logicog e280ccd2f9 Use RTL descriptor definition 2026-04-24 08:42:00 +02:00
logicog baa4e5e142 Use header structures of TX and RX, add dot1q for management VLAN TX 2026-04-22 22:36:26 +02:00
logicog b53e7e1a06 Add NOTHS macro 2026-04-22 22:36:26 +02:00
logicog 14b45735e2 Cleanup STP, use new frame descriptor definitions 2026-04-22 22:36:26 +02:00
logicog 946e80cebe Add frame descriptor structure 2026-04-22 22:36:26 +02:00
logicog e2df95ba90 Cleanup DHCP client code 2026-04-22 22:36:26 +02:00
logicog 570ee6c995 Move initialization routines to BANK2 2026-04-22 22:36:26 +02:00
feelfree69 e849af4a70 adapted syslog cmd_parsing to new method 2026-04-21 21:38:41 +02:00
feelfree69 812bf3bb67 Move code of rtl837x_pins.c to BANK2 due to BANK0 overflow 2026-04-21 21:37:25 +02:00
feelfree69 da8ec8fe88 Merge branch 'logicog:main' into syslog 2026-04-21 21:26:45 +02:00
logicog 01fa43510e Merge pull request #206 from vDorst/fix_cmd_parsing 
Fix cmd parsing
 2026-04-21 21:24:22 +02:00
René van Dorst d2e79d4d80 Fix: In commit 8cbafaa cmd_tokenize() has changed. Missed that it also used 
outside cmd_parser.c.
Fix the other location and headerfile.
 2026-04-21 21:17:22 +02:00
René van Dorst 016061d8db cmd: Fix 8324edc atoi_short() commit. 
vlan initialization was removed while trying out an other version.
But was not restored back.
 2026-04-21 21:16:03 +02:00
feelfree69 f7989cc737 Merge branch 'logicog:main' into syslog 2026-04-21 14:29:44 +02:00
logicog 5035366551 Merge pull request #204 from vDorst/remove___gptrxxx_calls 
Remove `__gptrput()` and `__gptrget()` calls
 2026-04-21 05:38:33 +02:00
logicog 2a8f183e6a Merge pull request #203 from vDorst/refactor_cmd_parsing 
Refactor cmd parsing
 2026-04-19 22:51:04 +02:00
René van Dorst 18225f5d22 uip: more fix. 2026-04-19 22:18:39 +02:00
René van Dorst 224471d676 uip: move second argument to __xdata free up 4 sram bytes. 2026-04-19 22:18:39 +02:00
René van Dorst 50d06c61bc change prototype uip_udp_new(), saves 1 sram. 2026-04-19 22:18:39 +02:00
René van Dorst d5709bcaf3 fix atoi 2026-04-19 22:18:39 +02:00
René van Dorst 52d943d5e4 rtlplayground: de-__gptrput()-call in read_reg_timer() 2026-04-19 22:18:39 +02:00
René van Dorst e79e90dd35 cmd_parser: de-__gptrput()-call in vlan_ingress_mode_parse() 2026-04-19 22:18:36 +02:00
René van Dorst da768171a5 change cmd_tokenize(). 
Remove the return argument because `err_status` is also reflecting the result.
Fix the error message when too many arguments are found.

refactor `execute_config()`, error out when err_status is not OK.
 2026-04-19 22:00:31 +02:00
René van Dorst 94bf4425ba uip: de-__gptrput()-call access to struct uip_udp_conn 2026-04-18 22:38:42 +02:00
René van Dorst 3e599f0e06 dhcp: de-__gptrput()-call in ip_opt() 2026-04-18 22:27:55 +02:00
René van Dorst 6c6d11ab33 dhcp: de-__gptrget()-call in dhcp_print_ip() 2026-04-18 22:20:46 +02:00
René van Dorst 791f68582d httpd: de-__gptrget()-call in string_to_html() 2026-04-18 22:20:46 +02:00
René van Dorst facc4afe40 uip: de-__gptrget()-call in timer_{set,reset,restart,exprired}() 2026-04-18 22:20:46 +02:00
René van Dorst 8134ca7ec7 uip: de-__gptrget()-call in uip_ipaddr_copy() 2026-04-18 22:20:46 +02:00
René van Dorst 642030c7b2 uip: de-__gptrget()-call in uip_add32() 2026-04-18 22:20:46 +02:00
René van Dorst 8324edc5f7 cmd_parser: Improve atoi_byte() and atoi_short(). 
Because no memory type is specified to the reference location, sdcc is
using a helper function to access the location. But sdcc is using a
register to tell the helper function which memory-type is used.
This registers must also be preseved until all access to that location is done.
 2026-04-18 22:19:35 +02:00
René van Dorst f2ff7d7737 parse_ee() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst a24b63a81f parse_mtu() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst abe3513bc6 parse_port() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst 49c43082a3 parse_mirror() make use of cmd_words_len, refactor small parts 2026-04-18 19:35:51 +02:00
René van Dorst f71e869b97 parse_ingress() make use of cmd_words_len, refactor small parts 2026-04-18 19:35:51 +02:00
René van Dorst 1fe236246a parse_isolate() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst 2acf2499d1 parse_lag_hash() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst 56e0d0a5d1 parse_lag() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst 7380aeb10d parse_bw() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst 0d698dc572 parse_passwd() make use of cmd_words_len, change password memcpy. 2026-04-18 19:35:51 +02:00
René van Dorst c7fb354f08 parse_sds{get,set}() and parse_phy{get,set}() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst 2cdab5f9d9 parse_reg{set,get}() make use cmd_words_len. 2026-04-18 19:35:51 +02:00
René van Dorst 301577efc8 parse_vlan() make use of cmd_words_len. 2026-04-18 19:35:51 +02:00
René van Dorst 1156f00f95 cmd_parser() make use of cmd_words_len 2026-04-18 19:35:51 +02:00
René van Dorst 8cbafaa347 Change cmd_tokenize() it only stores valid locations and use a length field. 2026-04-18 19:35:48 +02:00
René van Dorst 80ff1b25c9 Improve: cmd_compare(). 
Because `cmd` is guaranteed by the compiler to be NULL-terminated, we can make use of that to ensure the loop always ends.
So we don't need to know when the next words starts.
 2026-04-18 19:15:25 +02:00
René van Dorst 1a5208110c Merge pull request #195 from logicog/fix_config_reading 
Fix reading configuration over flash block boundaries
 2026-04-17 11:46:03 +02:00
logicog e2717ef7ca Count pages instead of bytes reading config in execute_config() 2026-04-17 11:37:15 +02:00
logicog 1769528420 Introduce global error variable, check during config execution 2026-04-16 22:01:51 +02:00
logicog 9d4c06d752 Merge pull request #200 from feelfree69/port_names 
Port names
 2026-04-14 18:51:43 +02:00
feelfree69 2565aeadf4 Do no show empty names in tooltips 2026-04-14 18:28:13 +02:00
logicog c3530aaafc Handle error when configuration file cmd too long 2026-04-14 18:00:29 +02:00
TylerDurden-23 6af19e1e6b Merge pull request #197 from logicog/isolation 
Port Isolation CLI command
 2026-04-14 08:02:16 +02:00
logicog 1683eef94b Fix bug where cmd_words[] is not properly initialized 2026-04-14 05:16:45 +02:00
logicog 036d9ca229 Add port isolation cmd 2026-04-13 20:13:28 +02:00
feelfree69 b31179acbe move extern declaration for port_names to trl837x_common.h 2026-04-13 19:14:24 +02:00
logicog b7ad67d336 Make port isolation API available 2026-04-13 18:15:01 +02:00
feelfree69 e130777b24 serial console cosmetic change 2026-04-13 14:55:50 +02:00
feelfree69 41f0dad49d Add ability to assign a name to a port 2026-04-13 14:55:10 +02:00
feelfree69 2e48415c95 fix after rebase: added udp_apps.c 2026-04-12 13:46:53 +02:00
feelfree69 22f8b9a287 rebase minor change in syslog cmd parsing 2026-04-12 13:08:05 +02:00
feelfree69 c91177d992 Web-If: Add Console-Cmd input 2026-04-12 13:02:42 +02:00
feelfree69 c1a414833d Various refactorings 2026-04-12 13:02:42 +02:00
feelfree69 2a9c7d2828 restart syslog when changing ip 2026-04-12 13:02:42 +02:00
feelfree69 d776118815 Revert unneeded changes 2026-04-12 13:02:42 +02:00
feelfree69 f7b8aed2f7 first working(?) version 2026-04-12 13:02:42 +02:00
feelfree69 7eb3676aaf remove log command 2026-04-12 13:02:42 +02:00
feelfree69 eaa21d5975 rebase First try to make use of uIP for sending syslog 2026-04-12 13:02:37 +02:00
feelfree69 193eacf51b rebase add syslog-addr to web-interface 2026-04-12 13:00:12 +02:00
feelfree69 b60811b984 initialize all vars; remove unused code 2026-04-12 12:58:02 +02:00
feelfree69 b85861347b Added setting for syslog IP 2026-04-12 12:58:02 +02:00
feelfree69 b21bfac917 rebase first prototype 2026-04-12 12:57:49 +02:00
logicog d4d12fe3b4 Merge pull request #192 from janh/cmd-sds-phy 
Add commands to read/write SerDes and PHY registers
 2026-04-10 15:37:01 +02:00
logicog 4440bcc43a Fix reading configuration over flash block boundaries 2026-04-09 22:34:32 +02:00
Jan Hoffmann f6a5163f33 Add commands to access PHY registers 2026-04-06 18:25:40 +02:00
Jan Hoffmann e210f31f0e Add commands to access SerDes registers 2026-04-06 18:25:35 +02:00
Jan Hoffmann 9eecdd071a Add atoi_byte function 
Similar to atoi_short, but reads into a uint8_t instead of a uint16_t.
 2026-04-06 18:25:30 +02:00
René van Dorst c4368c68be Merge pull request #189 from bstreiff/pcb23_v2_2 
Add support for keepLink KP-9000-9XHML-X (2M-PCB23-V2.2 version)
Rename machine keepLink KP-9000-9XHML-X (2M-PCB23-V3.1 version)
 2026-04-05 14:04:10 +00:00
ranma 1b02f303b2 Merge pull request #190 from ranma/fix-bit-linking 
Fix declaration of tx_buf_empty bit var

__sbit is for SFRs, for regular data __bit should be used. Otherwise the variables is not correctly declared in the BSEG section, leading to bit temporaries being allocated in the same location.

When this causes the tx_buf_empty to be overwritten to 0, then the next write_char will hang forever.

With this change the bit is properly declared in BSEG for the linker, which in my testing resolves the overlap issue:
```
;--------------------------------------------------------
; bit data
;--------------------------------------------------------
        .area BSEG    (BIT)
_tx_buf_empty::
        .ds 1
```

Only the vlan and mtu commands call atoi_short, which has a local bit _atoi_short_sloc0_1_0 which is the first bit in the BSEG, and assigning to that one corrupted the tx_buf_empty bit.
Though this is also a compiler optimization-failure, the _atoi_short_sloc0_1_0 value isn't even used after assignment, AFAICS it is a dead store.

Its from the isnumber inline:
```
[...]
;--------------------------------------------------------
; bit data
;--------------------------------------------------------
        .area BSEG    (BIT)
_atoi_short_sloc0_1_0:
        .ds 1
_parse_ip_sloc0_1_0:
        .ds 1
[...]
;       cmd_parser.c:85: l -= '0';
        mov     r3,a  
        add     a,#0xd0
;       cmd_parser.c:86: return (l <= ('9'-'0'));
        add     a,#0xff - 0x09
        cpl     c
;       cmd_parser.c:172: while (isnumber(cmd_buffer[idx])) {
        mov     _atoi_short_sloc0_1_0,c
        jnc     00103$
[...]
```
 2026-04-05 11:05:10 +02:00
Tobias Diedrich fd9a7717ce Fix declaration of tx_buf_empty bit var 
__sbit is for SFRs, for regular data __bit should be used.
Otherwise the variables is not correctly declared in the BSEG
section, leading to bit temporaries being allocated in the same
location.

When this causes the tx_buf_empty to be overwritten to 0, then
the next write_char will hang forever.
 2026-04-04 22:02:45 +02:00
Brenda Streiff 29ce05b70e Add keepLink KP-9000-9XHML-X V2.2 version 
This splits the current MACHINE_KP_9000_9XHML_X definition into "V2_2"
and "V3_1" versions for the two known versions of this hardware.

Confirmed to work:
- LED configuration matches stock firmware
- Port ordering matches label
- A SFP can be detected and EEPROM read (I don't have a fiber cable to test link)
- Reset button presses are detected
 2026-04-04 11:40:03 -05:00
Brenda Streiff 97ae6bf1d3 Document the '2M-PCB23-V2.2' PCB 
Sold as "keepLINK KP-9000-9XHML-X". This is different from the other, "V3.1"
version of the "keepLINK KP-9000-9XHML-X".
 2026-04-04 11:40:03 -05:00
TylerDurden-23 4ccb988d70 Merge pull request #188 from UAb5eSMn/machine_check 
Check if machine.c can be compiled for all machines
 2026-03-31 19:36:57 +02:00
UAb5eSMn 075d7e43f7 Check if machine.c can be compiled for all machines 2026-03-30 22:28:36 +02:00
René van Dorst 97e73d95aa Merge pull request #183 from janh/fix-i2c-and-sfp-ddm 
Fix I2C access and SFP diagnostic monitoring in web interface
 2026-03-30 17:21:51 +00:00
René van Dorst 2eb6bac4a5 Merge pull request #186 from UAb5eSMn/machine_fix 
Fix compilation issue for machine HG0402XG_V1_1
 2026-03-29 18:16:17 +00:00
UAb5eSMn 7d4ccf8f23 Remove machine HORACO_ZX_SG4T2 from comment 2026-03-29 20:10:56 +02:00
UAb5eSMn c0f6b8a1a6 Fix compilation error for machine HG0402XG_V1_1 2026-03-29 20:10:56 +02:00
TylerDurden-23 f3b6c16161 Merge pull request #185 from vDorst/fix_swgt024_v2_0 
Fix swgt024 v2.0
 2026-03-29 18:29:18 +02:00
René van Dorst 73f92f2e12 Add SWGT024_V2_0 Unmanaged pinout and machine type. 2026-03-29 16:35:31 +02:00
René van Dorst bfab8cbba3 Rename MACHINE_SWGT024_V2_0 to MACHINE_SWGT024_V2_0_MANAGED. 
So we can support other versions too.
 2026-03-29 16:13:38 +02:00
René van Dorst eedb0dec01 SWGT024 v2.0: Fix LED and RESET defines for managed version 
Original firmware used for RJ45:
* Amber leds only for 2.5GBit link/act.
* Green leds only for other speeds.
 2026-03-29 16:13:36 +02:00
logicog 08ad843c56 Merge pull request #184 from vDorst/rename_led_28 
Rename LED_28 to LED_28_SYS.
 2026-03-29 07:50:27 +02:00
Jan Hoffmann 05693f5171 Also show SFP TX/RX power in dBm 2026-03-29 00:33:48 +01:00
Jan Hoffmann 6eaa1985aa Fix SFP diagnostic monitoring data in web interface 
If the module is not internally calibrated, it is necessary to apply
calibration values to get meaningful results.
 2026-03-29 00:33:48 +01:00
Jan Hoffmann 45ba32f65d Fix scaling for power values in SFP diagnostics 2026-03-29 00:33:48 +01:00
Jan Hoffmann 0b4f59483b Don't write SFP options value twice in status JSON 2026-03-29 00:33:48 +01:00
René van Dorst 385c850d2f add comments 2026-03-28 21:40:43 +01:00
René van Dorst cdbc48f2c2 Rename LED_28 to LED_28_SYS. 
So it clear that led 28 is the SYSTEM LED.
 2026-03-28 19:29:49 +01:00
Jan Hoffmann efe0c282ba Fix I2C access code 
While the current implementation works for what it is actually used, it
is broken when trying to do larger transfers.

The length field in the control register has a size of 4 bits. In every
transfer, length+1 bytes are read. Thus, each transfer is limited to a
maximum of 16 bytes. Add a check for the length, and write the correct
value to the register.

Also update the loop in "sfp_send_data" to properly increment the output
register. Remove the unused special case for a length of 128 bytes.
 2026-03-28 18:14:15 +01:00
René van Dorst 54fced05b0 Merge pull request #178 from bennydiamond/Support_ZX_SWTGW215AS 
Add support for PCB-SWTG115AS-V2.0
 2026-03-28 13:16:07 +00:00
bennydiamond b64dfd8c25 Correction on IO mappings 
Add further clarification on mapping assumptions
 2026-03-27 20:56:09 -04:00
bennydiamond 5f1cd4cce0 Update documentation 2026-03-27 19:34:39 -04:00
bennydiamond 7ffd0c25c2 Support for PCB-SWTG115AS-V2.0 
Marketed as Lianguo ZX-SWTGW215AS
 2026-03-27 19:34:39 -04:00
René van Dorst 8b4e09ad69 Merge pull request #181 from janh/improve-1g-sfp-compat 
Improve compatibility with 1G SFP modules
 2026-03-27 22:58:30 +00:00
René van Dorst 34d53dddf2 Merge pull request #179 from bennydiamond/Early_boot_wipe_config 
Wipe config if button held at boot
 2026-03-27 20:05:55 +00:00
René van Dorst ec5f655bba Merge pull request #180 from janh/k0501w-rename-version 
Rename K0501W to include PCB version
 2026-03-27 19:52:29 +00:00
René van Dorst 7291f38e46 Merge pull request #182 from janh/commands-newline 
Make sure that the output of all commands ends with a newline
 2026-03-27 19:05:29 +00:00
Jan Hoffmann c3b99fdcdf Make sure that the output of all commands ends with a newline 2026-03-27 19:36:14 +01:00
Jan Hoffmann 9f800bae01 Improve compatibility with 1G SFP modules 
Some modules report a nominal signaling rate of 1200 MBd.
 2026-03-27 17:56:40 +01:00
logicog df498b0879 Merge pull request #173 from diijkstra/vlan_console 
Console: Add Ingress type & VLAN show table
 2026-03-26 21:02:33 +01:00
Jan Hoffmann 03422463e4 Rename K0501W to include PCB version 
It seems very likely that other versions are not compatible, so make it
clear by including it in the machine type and name. Also update the
documentation.
 2026-03-26 19:59:06 +01:00
bennydiamond 2bfbe5358b LED pattern definition on early boot reset 
LED Double blink while button is held

FAST blink for 3 seconds when config is reset
 2026-03-26 12:31:20 -04:00
TylerDurden-23 3bb89bfb80 Merge pull request #177 from janh/k0501w 
Add support for K0501W boards
 2026-03-26 10:12:32 +01:00
bennydiamond dba3679e2f Wipe config if button held at boot 
Blocking by design to prevent loading config

Button must be held between 10 and 30 seconds to trigger reset.

If held more than 30 seconds, boot normally. This is to prevent lock-up in case of weird hardware variants.
 2026-03-25 23:15:04 -04:00
Jan Hoffmann f331a6129a Add support for K0501W boards 
This board appears for example in the Davuaz Da-K6501W switch, and is
designed similarly to Hi-K0402WS.

However, it only has one SFP port and another 2.5G copper port using
RTL8221B 2.5G PHY instead. Also, some components on the board, like
additional LEDs, mode switch, and second flash chip are not populated.

Like earlier revisions of the K0402W(S) board, there is no UART, so
debugging is limited.

As this is an unmanaged switch, installation needs a flash programmer.
 2026-03-25 19:31:14 +01:00
logicog 877e5a68fb Merge pull request #176 from janh/improve-2500m-sfp-compat 
Improve compatibility with 2.5G SFP modules
 2026-03-24 18:13:27 +01:00
Jan Hoffmann ed6c95e522 Improve compatibility with 2.5G SFP modules 
Some modules might report a nominal bitrate of 2500 Mbd or 3200 Mbd
instead of 3100 Mbd. Accept the entire range to make them work.
 2026-03-24 15:26:29 +01:00
diijkstra cb8d0e45bb Review: Move w initialization 2026-03-23 19:31:06 +01:00
TylerDurden-23 877b16e837 Merge pull request #174 from logicog/fix_vlan_display 
Fix display of VLANs for ports
 2026-03-22 18:20:33 +01:00
logicog fce64ac368 Fix display of VLANs for ports 2026-03-22 13:45:42 +01:00
logicog dd9e5c8ff8 Merge pull request #172 from diijkstra/trendnet 
Document firmware upload via CLI
 2026-03-22 05:26:45 +01:00
diijkstra f7fcf0eda7 Console: Add Ingress type & VLAN show table 
Added new `vlan show` command to dump current VLAN settings.
Supports printing PVID & ingress filtering per port.

Added new `ingress [p]<mode>` command to setup ingress filtering.
Added wrappers for enabling/disabling vlan filtering. Currently
not configurable, but state in console is read via ASIC registers.

Full VLAN dump & web support of new commands will be added later.
 2026-03-21 12:29:26 +01:00
diijkstra 905cf38f1f Trendnet: Another mapping fix 
Physical to logical mapping was reverted for SFP ports.
 2026-03-21 12:22:36 +01:00
diijkstra b0370f7bb3 Doc: Describe how to upload firmware via CLI & HTTP 
Rough explanation how to upload a new firmware. Probably, we should
support basic auth on upload for easier use, but lets document
what we have.
 2026-03-21 12:22:36 +01:00
logicog d21d269d49 Merge pull request #152 from mmmspatz/mspatz/fix_vlan_page 
Fix "Get Configuration" on vlan.html
 2026-03-19 11:36:59 +01:00
feelfree69 cb81f82cf6 Merge pull request #170 from logicog/fix_bank0 
Fix missing assignment of bank when html_data.c code is generated
 2026-03-19 11:23:07 +01:00
logicog 59e7a21955 Merge pull request #159 from diijkstra/web_sfp_state 
Web: Add SFP state/pin status
 2026-03-19 05:22:24 +01:00
logicog c530ec4ae3 Fix missing assignment of bank when html_data.c code is generated 2026-03-18 08:34:26 +01:00
TylerDurden-23 8e2b48ef25 Merge pull request #167 from logicog/browsser_trouble 
Fix browser issues with Chrome and latest Firefox
 2026-03-17 10:29:02 +01:00
logicog 65f094c1d1 Merge pull request #163 from feelfree69/parser_fix 
fix crash
 2026-03-16 17:51:24 +01:00
logicog 090283d538 Add retry mechanism for xhttp requests to make Chrome happy 2026-03-16 17:32:50 +01:00
logicog 7e3a0f5d8f Allow javascript to modify svg styles for Firefox version >140 2026-03-16 17:32:15 +01:00
feelfree69 4706f6232a simplify parsing code 2026-03-15 15:43:34 +01:00
diijkstra b47a868db3 Web: Handle missing LOS pin 
When device has no LOS pin and module has no extended status, the
RX LOS value will not be shown. When both are present, the equality
check is performed. When only one is present, the present value
will be shown.

json from the switch, will still contain the field, but can be
null for when pin is not available.
 2026-03-15 12:18:02 +01:00
feelfree69 454eb28bce Merge branch 'logicog:main' into parser_fix 2026-03-15 08:58:15 +01:00
logicog dc283bc724 Merge pull request #165 from feelfree69/bank0_overflow 
Fail building image on BANK0 overflow
 2026-03-15 07:39:38 +01:00
feelfree69 a001cd3da7 Fail also on BANK0 overflow 2026-03-14 22:15:33 +01:00
feelfree69 e92b4a2358 Don't allow partial commands 2026-03-14 19:47:56 +01:00
René van Dorst 47c5443f0e Merge pull request #164 from TylerDurden-23/fix-1gbaset-sfp 
Fix 1GBase-T SFP module not working on serdes port 1.
 2026-03-14 17:03:05 +00:00
chriz baa3e7edb7 Fix 1GBase-T SFP module not working on serdes port 1. 2026-03-14 16:33:54 +01:00
feelfree69 34d46aa29a fix crash 2026-03-14 13:59:14 +01:00
diijkstra 6b64534f40 WEB: Display single RX LOS 
As sugested, lets display single value, and raise alarm when pin
is different than module.
 2026-03-14 13:15:01 +01:00
logicog b18ed62042 Merge pull request #161 from diijkstra/backspace 
Console: Handle ^H as backspace
 2026-03-14 13:14:39 +01:00
diijkstra 16edc6b421 Console: Handle ^H as backspace 
Currently only ASCII DEL (key code 127) is handled as backspace, but some terminal
emulators are sending ^H which is ASCII BS (key code 8). Looks like we can
safely treat both in the same matter.
 2026-03-14 12:35:16 +01:00
logicog f1e5b7e31a Merge pull request #92 from vDorst/doc_gpio 
doc: gpio overview and mux settings
 2026-03-14 12:17:06 +01:00
diijkstra 1f6e07a1af Web: Add SFP state/pin status 
The state of the SFP module is being already send in status.json,
but was not parsed via Web UI. When debuging SFP LOS/Signal detection
it is usefull to see what module is reporting back.

Extended the SFP mouse-over information with:
 - RX LOS as reported in 0x02 bit of register 238
 - External TX Disabled from 0x80 bit of register 238
 - TX fault from 0x04 of the same register
 - The last state of RX LOS pin (available also when there is no 0x40
   option on the module)

This should help identify missing/incorrect setup of TX disabled pin.
 2026-03-13 23:56:43 +01:00
logicog 0952676504 Merge pull request #158 from diijkstra/trendnet 
TEG-S562: Port LEDs
 2026-03-13 23:46:22 +01:00
diijkstra 95cbc1a2e0 TEG-S562: Correctly assign SFP 
Looks like the SFP numbers are reversed, since GPIOs were mapped
to SFP numbers, the need to be reversed too. This fixes swapped
display of SFP stats on the webpage.
 2026-03-13 23:36:29 +01:00
diijkstra d5fdaf28e8 Light description for led-set 
Very light description for port_led_set and led_sets, which was
helpfull when bringing up the trendnet device.
 2026-03-13 21:43:22 +01:00
diijkstra 511d35f63d TEG-S562: Port LEDs 
Added support for all leds on the device.

Stock port sets are slightly differently configured, where additional
LED0 on SET_0 and LED1&LED2 where configured for link/collisions/duplex.
This has not been reproduced as those lines are probably not connected
anywhere.
 2026-03-13 21:40:34 +01:00
logicog 96484bc62a Merge pull request #156 from feelfree69/make-cleanup 
Cleanup Makefile
 2026-03-11 20:54:47 +01:00
feelfree69 765000ce4f fixed html dependencies 2026-03-11 19:08:32 +01:00
feelfree69 dc9b211924 BUILDDIR without slash 2026-03-11 19:01:21 +01:00
feelfree69 b559c3b868 avoid doubled generation of html_data.* 2026-03-11 07:34:18 +01:00
feelfree69 13fe354da7 add dependency file generation 2026-03-11 07:26:15 +01:00
feelfree69 fc4b12725c Cleanup Makefile 2026-03-10 21:57:16 +01:00
logicog 0a52386e60 Merge pull request #155 from feelfree69/fix-bank-overflow 
fix bank overflow
 2026-03-10 21:47:46 +01:00
feelfree69 4b167151a5 fix bank overflow 2026-03-10 21:35:25 +01:00
René van Dorst f474b5822b Merge pull request #151 from logicog/concurrency 
Web request concurrency management
 2026-03-10 18:49:18 +00:00
logicog fa37940075 Control xhttp concurrency 2026-03-10 06:16:18 +01:00
Mark H. Spatz 893dcd8fcf update vlan.md 2026-03-08 19:49:37 -04:00
Mark H. Spatz 16f4e2a1c6 Fix range check in vlan_get() 2026-03-08 17:52:39 -04:00
Mark H. Spatz 364d538abd Fix "VLAN ID" field max value on vlan.html 2026-03-08 17:50:54 -04:00
Mark H. Spatz 4cef63200f Fix "Get Configuration" on vlan.html 
I noticed that entering some vlan config, clicking "Update/Create", then
clicking "Get Configuration" resulted in Tagged/Untagged/PVID displaying
completely wrong data. It looks like the parisng in fetchVLAN() in
vlan.js was just completely disconnected from the layout of the
registers read by vlan_get() in rtl837x_port.c. Who knows how that
happened.

1. Fix fetchVLAN() member/untag parsing: the old code read bits [9:0]
   as untagged and bits [10:19] as tagged, but the VLAN table register
   layout is members in [9:0] and untag in [19:10]. Now correctly
   derives tagged (member && !untag) and untagged (member && untag).

2. Add PVID to vlan.json response: PVID is stored per-port in separate
   PVID registers (RTL837x_PVID_BASE_REG), not in the VLAN table entry.
   The old code nonsensically tried to read it from bits [20:29] of the
   VLAN table. Add port_pvid_get() and build a pvid bitmask in
   send_vlan() so the JS can parse it correctly.

3. Remove auto-PVID logic from setC(): setC() is called by fetchVLAN()
   while it's loading existing config, and so this logic mangled the
   display of the existing config. Also, it doesn't make sense to
   auto-set the PVID for tagged members (PVID relates to untagged
   ingress.)
 2026-03-07 15:18:06 -05:00
René van Dorst a0313eab87 doc: gpio overview and mux settings 2026-01-22 23:04:07 +01:00
150 changed files with 7154 additions and 1469 deletions
Expand all files Collapse all files
.dockerignore
+19
View File
@@ -0,0 +1,19 @@
.git/
.gitignore
.gitattributes
.github/
output/
installer/output/
*.bin
html_data.c
html_data.h
*.o
*.rel
*.lst
*.sym
*.asm
*.ihx
*.img
*.map
*.mem
*.lk
.github/workflows/build.yml
+3 -1
View File
@@ -17,5 +17,7 @@ jobs:
run: |
apt update
apt install make gcc sdcc xxd python-is-python3 libjson-c-dev -y
- name: Check if machine.c can be compiled for all machines
run: make machine_check
- name: Make project
run: make MACHINE="KP_9000_6XHML_X2"
run: make MACHINE="KP_9000_6XHML_X2"
Dockerfile
+19
View File
@@ -0,0 +1,19 @@
FROM debian:13-slim
RUN apt-get update && apt-get install -y \
make \
gcc \
sdcc \
xxd \
python3 \
libjson-c-dev \
golang-go \
git \
&& rm -rf /var/lib/apt/lists/*
# git safe.directory for mounted repos (Makefile uses git describe)
RUN git config --global --add safe.directory /workspace
WORKDIR /workspace
CMD ["bash"]
Makefile
+105 -39
View File
@@ -4,41 +4,98 @@ DEFAULT_CONFIG_LOCATION = 454656
CONFIG_LOCATION = 458752
HTML_LOCATION = 262144
ifeq ($(origin CC),default)
CC = sdcc
endif
CC_FLAGS = -mmcs51 -I. -Ihttpd -Iuip
ASM = sdas8051
ASM ?= sdas8051
AFLAGS= -plosgff
SUBDIRS := tools uip httpd
SUBDIRS := tools
SUBDIRSCLEAN=$(addsuffix clean,$(SUBDIRS))
BUILDDIR = output/
VERSION_HEADER := version.h
ifeq ($(MACHINE),)
MACHINE:= $(shell grep "^\s*#define MACHINE_" machine.h | sed "s/^\s*#define MACHINE_//")
else
CC_FLAGS += -DMACHINE_$(MACHINE)
endif
all: create_build_dir $(VERSION_HEADER) $(SUBDIRS) $(BUILDDIR)rtlplayground.bin
BUILDDIR = output/$(MACHINE)
VERSION_HEADER := version.h
GIT_VERSION := $(shell git rev-parse --short HEAD)
ifeq ($(shell git status --porcelain --untracked-files=no),)
else
GIT_VERSION := $(GIT_VERSION)-dirty
endif
VERSION_EXTENSION = v$(VERSION)-$(GIT_VERSION)
FILENAME_EXTENSION = $(VERSION_EXTENSION)-$(MACHINE)
# Deterministic build date: honor SOURCE_DATE_EPOCH, else the HEAD commit date,
# else wall-clock (no-git fallback). Keeps same-commit builds byte-identical
# (BUILD_DATE is baked into the image and covered by the trailing CRC).
SOURCE_DATE_EPOCH ?= $(shell git show -s --format=%ct HEAD 2>/dev/null)
ifeq ($(SOURCE_DATE_EPOCH),)
BUILD_DATE := $(shell date +"%Y-%m-%d %H:%M:%S")
else
BUILD_DATE := $(shell date -u -d @$(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S" 2>/dev/null \
|| date -u -r $(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S")
endif
all: create_build_dir $(VERSION_HEADER) $(SUBDIRS) $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin
create_build_dir:
mkdir -p $(BUILDDIR)
mkdir -p "$(BUILDDIR)"
mkdir -p "$(BUILDDIR)/uip"
mkdir -p "$(BUILDDIR)/httpd"
SRCS = rtlplayground.c rtl837x_flash.c rtl837x_leds.c rtl837x_phy.c rtl837x_port.c cmd_parser.c html_data.c rtl837x_igmp.c \
rtl837x_stp.c rtl837x_pins.c dhcp.c machine.c cmd_editor.c rtl837x_bandwidth.c
OBJS = ${SRCS:%.c=$(BUILDDIR)%.rel}
OBJS += uip/$(BUILDDIR)/timer.rel uip/$(BUILDDIR)/uip-fw.rel uip/$(BUILDDIR)/uip-neighbor.rel uip/$(BUILDDIR)/uip-split.rel uip/$(BUILDDIR)/uip.rel uip/$(BUILDDIR)/uip_arp.rel uip/$(BUILDDIR)/uiplib.rel httpd/$(BUILDDIR)/httpd.rel httpd/$(BUILDDIR)/page_impl.rel
# Keep machine.c in first position to fail immediately on invalid $MACHINE value
SRCS = \
machine.c \
cmd_editor.c \
cmd_parser.c \
dhcp.c \
html_data.c \
rtlplayground.c \
syslog.c \
udp_apps.c
html_data.c html_data.h: html tools
tools/$(BUILDDIR)fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -b BANK1 -d html -p html_data
# RTL837x
SRCS += \
rtl837x_bandwidth.c \
rtl837x_flash.c \
rtl837x_igmp.c \
rtl837x_init.c \
rtl837x_leds.c \
rtl837x_phy.c \
rtl837x_pins.c\
rtl837x_port.c \
rtl837x_stp.c
SRCS += \
httpd/httpd.c \
httpd/page_impl.c
SRCS += \
uip/timer.c \
uip/uip.c \
uip/uiplib.c \
uip/uip_arp.c \
uip/uip-fw.c \
uip/uip-neighbor.c \
uip/uip-split.c
OBJS = ${SRCS:%.c=$(BUILDDIR)/%.rel}
DEPS := ${SRCS:%.c=$(BUILDDIR)/%.d}
HTML := $(shell find html -name '*.js' -or -name '*.html' -or -name '*.svg')
html_data.c html_data.h &: $(HTML) | tools
tools/output/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -b BANK1 -d html -p html_data
$(VERSION_HEADER):
@echo "#ifndef VERSION_H" > $(VERSION_HEADER)
@echo "#define VERSION_H" >> $(VERSION_HEADER)
@echo "#define VERSION_SW \"v$(VERSION)-g$(shell git rev-parse --short HEAD)\"" >> $(VERSION_HEADER)
@echo "#define BUILD_DATE \"$(shell date +"%Y-%m-%d %H:%M:%S")\"" >> $(VERSION_HEADER)
@echo "#endif" >> $(VERSION_HEADER)
@printf '%s\n' "#ifndef VERSION_H" "#define VERSION_H" \
"#define VERSION_SW \"$(VERSION_EXTENSION)\"" \
"#define BUILD_DATE \"$(BUILD_DATE)\"" \
"#endif" > $(VERSION_HEADER)
httpd: html_data.h
@@ -46,37 +103,46 @@ $(SUBDIRS):
$(MAKE) -C $@
clean:
-make -C uip clean
-make -C httpd clean
-rm html_data.c html_data.h $(VERSION_HEADER)
-rm -r $(BUILDDIR)
-rm -f html_data.c html_data.h $(VERSION_HEADER)
-if [ -d $(BUILDDIR) ]; then find $(BUILDDIR) -type f ! -name "*.bin" -delete; fi
$(BUILDDIR)crtstart.rel: crtstart.asm
$(ASM) $(AFLAGS) -o $@ $<
distclean:
-rm -f html_data.c html_data.h $(VERSION_HEADER)
-rm -rf $(BUILDDIR)
$(BUILDDIR)crc16.rel: crc16.asm
$(ASM) $(AFLAGS) -o $@ $<
$(BUILDDIR)/%.rel: %.c | create_build_dir html_data.h
$(CC) -MMD $(CC_FLAGS) -o $@ -c $<
$(BUILDDIR)%.rel: %.c
$(CC) $(CC_FLAGS) -o $@ -c $<
$(BUILDDIR)%.rel: $(BUILDDIR)%.asm
$(BUILDDIR)/%.rel: %.asm | create_build_dir
${ASM} ${AFLAGS} -o $@ $<
# mv -f $(addprefix $(basename $^), .lst .rel .sym) .
$(BUILDDIR)rtlplayground.ihx: $(OBJS) $(BUILDDIR)crtstart.rel $(BUILDDIR)crc16.rel
$(BUILDDIR)/rtlplayground.ihx: $(OBJS) $(BUILDDIR)/crtbank.rel $(BUILDDIR)/crc16.rel
$(CC) $(CC_FLAGS) -Wl-bHOME=0x00000 -Wl-bBANK1=0x14000 -Wl-bBANK2=0x24000 -Wl-r -o $@ $^
$(BUILDDIR)rtlplayground.img: $(BUILDDIR)rtlplayground.ihx
$(BUILDDIR)/rtlplayground.img: $(BUILDDIR)/rtlplayground.ihx
objcopy --input-target=ihex -O binary $< $@
$(BUILDDIR)rtlplayground.bin: $(BUILDDIR)rtlplayground.img
$(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin: $(BUILDDIR)/rtlplayground.img | tools
if [ -e $@ ]; then rm $@; fi
tools/$(BUILDDIR)imagebuilder -i $^ $@
tools/$(BUILDDIR)fileadder -a $(DEFAULT_CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
tools/$(BUILDDIR)fileadder -a $(CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
tools/$(BUILDDIR)fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -d html -p html_data $@
tools/$(BUILDDIR)crc_calculator -u $@
tools/output/imagebuilder -i $^ $@
tools/output/fileadder -a $(DEFAULT_CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
tools/output/fileadder -a $(CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
tools/output/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -d html -p html_data -b BANK1 $@
tools/output/crc_calculator -u $@
ln -sf $(MACHINE)/rtlplayground-$(FILENAME_EXTENSION).bin output/rtlplayground.bin
.PHONY: clean all $(SUBDIRS) $(VERSION_HEADER) create_build_dir
.PHONY: clean all $(SUBDIRS)
.PHONY:
machine_check:
@mkdir -p $(BUILDDIR)/tmp
@set -eo pipefail; \
for MACHINE in `grep -e ' MACHINE_' machine.c | sed -e 's%^.* MACHINE_%%' -e 's%[ ]*//.*$$%%' | sort -u`; \
do \
echo "Checking $${MACHINE}"; \
$(CC) $(CC_FLAGS) -DMACHINE_$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine.c; \
done
@rm -rf $(BUILDDIR)/tmp
-include $(DEPS)
README.md
+180 -54
View File
@@ -52,88 +52,192 @@ devices by looking at the image using e.g. Ghidra. If you want to contribute to
design of the web-interface or get a feeling for the interface first, a standalone
device simulator is provided, which runs entirely under Linux as a local webserver.
## Compiling
## (0) Compiling Requirements
Install the following particular build requisites (Debian 12/13), note that Ubuntu 24.04
still has an older version of sdcc, but you will need sdcc version 4.5 for the code to compile:
```
sudo apt install make gcc sdcc xxd python-is-python3 libjson-c-dev
```
<details>
<summary>If using Docker (click to expand)</summary>
### Prerequisites
Install Docker for your platform:
- **Linux (Debian/Ubuntu)**: `sudo apt install docker.io` then `sudo usermod -aG docker $USER` (log out and back in)
- **Linux (other distros)**: Follow the [Docker Engine install guide](https://docs.docker.com/engine/install/)
- **Windows**: Install [Docker Desktop for Windows](https://docs.docker.com/desktop/setup/install/windows-install/)
- **macOS**: Install [Docker Desktop for Mac](https://docs.docker.com/desktop/setup/install/mac-install/)
### Usage
A Dockerfile is provided for a reproducible build environment:
```
docker build -t rtlplayground-dev .
```
Build the firmware (replace MACHINE with your target, e.g. `DEFAULT_8C_1SFP`):
```
docker run --rm -v $(pwd):/workspace rtlplayground-dev make MACHINE=DEFAULT_8C_1SFP
```
The resulting `.bin` file appears in `output/` on your host.
Build host tools only:
```
docker run --rm -v $(pwd):/workspace rtlplayground-dev make -C tools
```
Run the web-interface simulator locally:
```
docker run --rm -p 8080:8080 -v $(pwd):/workspace rtlplayground-dev \
tools/output/httpd_sim /workspace/html
```
Edit `machine.h` or `config.txt` on your host, then re-run `make` — the
source directory is mounted into the container, so changes take effect
immediately. To build for a different machine, pass `MACHINE=...`.
</details>
## (1) Compiling for direct chip flashing AND upgrading an existing RTLPlayground running device
Edit machine.h with an editor like vi or nano. Select the correct machine the firmware should build for.
> [!TIP]
> You can write configuration parameters in config.txt (see below) in order your switch to get
> straight at the first boot, a correct IP configuration.
Now, building the firmware image should work:
```
make
```
Note, that the image generated ends in .bin, not .img, in order to make
IMSProg happy.
Note, that the image generated ends in .bin, not .img, in order to make IMSProg happy.
image location is stored in `RTLPlayground/output/rtlplayground_version_machine.bin`
for example
```
rtlplayground-v0.1.0-12c98ba-dirty-LIANGUO_ZX_SWTGW215AS.bin
```
> [!CAUTION]
> This image can be flashed directly to the chip OR through the firmware update/upgrade
> interface of RTLPlaygound interface
## (2) Compiling for OEM running device with management options (web upgrade)
Managed switches can be updated from the existing original firmware using a SPECIFIC upgrade image.
You first need to build the firmware for direct chip flashing : See below (1)
Then
```
cd installer
make
```
image location is stored in `RTLPlayground/installer/output/rtlplayground_oem_upgrade.bin`
> [!CAUTION]
> This image must ONLY be used for original OEM firmware web interface firmware upgrade.
> You do not need this image if you are already on RTLplayground firmware.
> Unless you go back to the original OEM firmware, you would only flash this specific firmware
> only once. Future upgrades of RTLPlayground will only need to follow (1)
example of compilation console output
Managed switches can be updated from the existing original firmware using an upgrade image.
In the `installer`folder of the source code you will need to run `make` which will build
an image out of `rtlplayground.bin` built in the previous step:
```
RTLPlayground/installer$ make
mkdir -p output/
mkdir -p output
gcc updatebuilder.c -o output/updatebuilder
sdas8051 -plosgff -o output/crtstart.rel crtstart.asm
sdcc -mmcs51 --code-loc 0x1000 -o output/installer.rel -c installer.c
sdcc -mmcs51 -Wl-bHOME=0x1100 -Wl-r -o output/rtlinstaller.ihx output/crtstart.rel output/installer.rel
cp ../output//rtlplayground.bin output/
./output//updatebuilder -i output/rtlinstaller.ihx output/rtlplayground.bin
./output/updatebuilder -i output/rtlinstaller.ihx -o output/rtlplayground_oem_upgrade.bin ../output/rtlplayground.bin
Input file size: 524288
Bytes read: 524288
EOF
Payload sum 1 is: 0x29d10
Payload sum 2 is: 0x29d10
Payload sum with header is: 0x2b0fc
Payload sum is: 0xad8a75
Header checksum is: 0x4c3
Payload sum 1 is: 0x25100
Payload sum 2 is: 0x25100
Payload sum with header is: 0x264ec
Payload sum is: 0xf8fe94
Header checksum is: 0x5a1
```
The resulting image can be found in `RTLPlayground/installer/output/rtlplayground.bin`
> [!CAUTION]
> DO NOT UPLOAD THE UPGADE IMAGE UNLESS YOU CAN MAKE A BACKUP USING A SOIC CLAMP OF THE
> ORIGINAL FIRMWARE!
## Installation
## (3) Sandbox Usage with Ghidra (optional)
You can play with the image using ghidra or flash real Switch Hardware. For
ghidra see this information about [Ghidra images](ghidra.md).
## (4) Installation through the Web interface (software way)
Managed switches (OEM firmware of RTLplaygroud firmware) can be upgraded via the web interface.
Unmanaged switch cannot be flashed this way (see 5).
Go to "Firmware update" tab, select the correct file.
> [!IMPORTANT]
> If your device already runs RTLPlayground, you must upload the binary file /RTLPlayground/output/rtlplayground_Version_Machine.bin
> If your device is OEM, you must upload the binary file /RTLPlayground/installer/outputrtlplayground_oem_upgrade.bin
> [!CAUTION]
> NOTE THAT WHILE THIS PROCEDURE HAS BEEN SUCCESSFULLY TESTED ON ALL DEVICES ABOVE,
> ABSOLUTELY NO GUARANTY CAN BE GIVEN THAT YOU WILL NOT DESTROY YOUR SWITCH,
> ANY OTHER EQUIPMENT INVOLVED OR HARM YOURSELF BY OPENING THE ELECTRONIC
> DEVICE. OPENING THE SWITCH WILL VOID ITS WARRANTY.
> Check one more time that your device matches the machine type before flashing.
> Be shure you have a backup of the original firmware before diving in RTLPlaygroung.
You can upload the upgrade image of managed switches via the web interface of the
original firmware just as if you were installing a firmware upgrade. However,
this is strongly discouraged, as you may brick your device, unless you can make
firmware backups via a SOIC clamp or soldered flash socket, first!
Finally, push the Upload File Button and you're done !
For unmanaged devices, the only way to install RTLPlayground is by flashing the
Flash memory directly.
You will need to open your switch to flash the image directly onto the flash chip,
which is done easiest using a SOIC-8 clip (alternatively you de-solder the
flash chip and install a SOIC adapter):
- Disconnect power from switch
- Attach the clip onto the flash chip
- Connect USB of flash programmer, the power LED on the switch will light
up, check cabling if not. Don't panic, mixing up GND and 3.3V does not
seem to destroy the switch (at leasts the on I did this to).
- Use IMSProg (flashrom should work, too) to detect the clip
- MAKE A BACKUP OF THE EXISTING FIRMWARE!
- then load the firmware into IMSProg
- and program flash
## (5) Flashing the ROM directly (hardware way, but also only way to rescue)
Now you can connect a serial cable to the UART port found on all the
devices, set 8N1 @ 115200 baud and power up the switch.
This procedure is the only way to flash unmanaged switches, if the ROM chip is large enough.
This is also the only way to unbrick your device if something went wroong.
The device will perform some examples and provide a minimal console, the
documentation of which can be found in the source code rtlplayground.c`.
> [!IMPORTANT]
> You need a SOIC-8 clip to flash the ROM chip directly onboard.
> Alternatively you can de-solder the flash chip and install a SOIC adapter).
> For flashing the chip directly, you must use the binary file /RTLPlayground/output/rtlplayground_Version_Machine.bin
## The web-interface
The web-interface can be reached under the [default 192.168.10.247](http://192.168.10.247).
The default password is `1234`.
> [!CAUTION]
> As you need to open your switch case, consider that the warranty is gone.
- Disconnect power from switch.
- Open the switch.
- Attach the clip onto the flash chip (Red line on Pin 1, Pin 1 has a point marker).
- Connect USB of flash programmer, the power LED on the switch will light up, check cabling if not.
- Don't panic, mixing up GND and 3.3V usually does not destroy the switch.
- Use IMSProg, Flashrom, or whatever Programmer to detect the chip.
- MAKE A BACKUP (DUMP) OF THE EXISTING FIRMWARE !
- ERASE THE ROM (BLANK) !
- Load the firmware into IMSProg.
- Flash is to the ROM chip.
- Disconect the clip from the ROM chip.
- You're done, ready for the first boot.
## (6) Connecting a serial interface (optional)
You can connect a serial cable to the UART port found on all the devices, set 8N1 @ 115200 baud.
## (7) Power Up
When you power up the switch, the device will perform some examples and provide a minimal console
(if wired to a serial interface), the documentation of which can be found in the source code rtlplayground.c`.
## (8) The web-interface
The web-interface can be reached under the [default 192.168.10.247](http://192.168.10.247) unless you
specified an IP adress in the config.txt before compilation.
> [!TIP]
> The default password is `1234`.
## (9) The command line
## The command line
The command line is very rudimentary and mostly for testing purposes.
The following is a boot-log with some examples:
```
@@ -198,7 +302,6 @@ PORT 04 1G
<MODULE INSERTED> Rate: 67 Encoding: 01
Lightron Inc. WSPXG-ES3LC-IHA 0000
> stat
CMD: stat
Port State Link TxGood TxBad RxGood RxBad
@@ -216,17 +319,40 @@ Lightron Inc. WSPXG-ES3LC-IHA 0000
CMD: sfp
Rate: 67 Encoding: 01
Lightron Inc. WSPXG-ES3LC-IHA 0000
```
## (10) Advanced configuration
You can configure more deeply the switch without the need of the console mode.
While in compilation part, you might write directly to config.txt file before making the binary firmware
```
nano config.txt
```
If you want to modify settings after the flash is done, go to the Advanced Settings tab in System Settings
<img width="1085" height="646" alt="ADVANCED SETTINGS" src="doc/images/advanced_settings.png" />
```
ip xxx.xxx.xxx.xxx = IP adress of the switch
gw yyy.yyy.yyy.yyy = IP adress of the gateway
netmask zzz.zzz.zzz.zzz = Network mask of the switch
port x name xxx = Name xxx the port number x
port z 1g = Set 1g speed for port z
igmp on/off = Turn IGMP on or off
```
[To be continue]
Enjoy playing!
## Other documents
The following documents give further documentation on specific features of
the RTL837x SoCs:
## (11) Other documents
The following documents give further documentation on specific features of the RTL837x SoCs:
- [RTL8372/3 Feature support](doc/hardware.md)
- [CPU Port](doc/CpuPort.md)
- [L2 learning](doc/l2.md)
- [CPU Port](doc/CpuPort.md)
- [IGMP (IP-MC streaming)](doc/igmp.md)
- [SFP+ ports](doc/sfp.md)
- [Trunking aka. port aggregation](doc/trunking.md)
cmd_editor.c
+20 -17
View File
@@ -40,21 +40,24 @@ void cmd_edit(void) __banked
{
while (l != sbuf_ptr) {
if (sbuf[l] >= ' ' && sbuf[l] < 127) { // A printable character, copy to command line
if (cmd_line_len >= CMD_BUF_SIZE)
continue;
write_char(sbuf[l]);
// Shift buffer to right
for (uint8_t i = cmd_line_len; i > cursor; i--)
cmd_buffer[i] = cmd_buffer[i-1];
// Insert char in comand buffer
cmd_buffer[cursor++] = sbuf[l];
cmd_line_len++;
// Print rest of line
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char(cmd_buffer[i]);
// Move backwards
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char('\010'); // BS works like cursor-left
// Reserve one byte for the terminating NUL written on Enter. When the
// line is full, drop the character but still fall through to advance the
// serial-ring read pointer below; a 'continue' here would spin forever.
if (cmd_line_len < CMD_BUF_SIZE - 1) {
write_char(sbuf[l]);
// Shift buffer to right
for (uint8_t i = cmd_line_len; i > cursor; i--)
cmd_buffer[i] = cmd_buffer[i-1];
// Insert char in comand buffer
cmd_buffer[cursor++] = sbuf[l];
cmd_line_len++;
// Print rest of line
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char(cmd_buffer[i]);
// Move backwards
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char('\010'); // BS works like cursor-left
}
} else if (sbuf[l] == '\033') { // ESC-Sequence
// Wait until we have at least 3 characters including the ESC character in the serial buffer
if (((sbuf_ptr + SBUF_SIZE - l) & SBUF_MASK) < 3)
@@ -169,7 +172,7 @@ void cmd_edit(void) __banked
} else { // An unknown or not yet complete Escape sequence: wait
continue;
}
} else if (sbuf[l] == 127) { // Backspace
} else if (sbuf[l] == 127 || sbuf[l] == 8) { // Backspace DEL or BS/^H
if (cursor > 0) {
write_char('\010');
for (uint8_t i = cursor; i < cmd_line_len; i++)
@@ -197,7 +200,7 @@ void cmd_edit(void) __banked
if (cmd_line_len)
cmd_available = 1;
else
print_string("\n> ");
print_cmd_prompt();
cursor = 0;
cmd_line_len = 0;
history_editptr = 0xffff;
cmd_parser.c
+855 -199
View File
File diff suppressed because it is too large Load Diff
cmd_parser.h
+4 -1
View File
@@ -7,10 +7,13 @@
extern __xdata uint8_t cmd_buffer[CMD_BUF_SIZE];
extern __xdata uint8_t cmd_available;
extern __xdata uint8_t err_status;
uint8_t cmd_tokenize(void) __banked;
void cmd_tokenize(void) __banked;
void cmd_parser(void) __banked;
void execute_config(void) __banked;
void execute_commands(__xdata uint8_t *p) __banked;
void print_sw_version(void) __banked;
void clear_command_history(void) __banked;
#endif
crtbank.asm
+29
View File
@@ -0,0 +1,29 @@
.area HOME (CODE)
.area GSINIT0 (CODE)
.area GSINIT1 (CODE)
.area GSINIT2 (CODE)
.area GSINIT3 (CODE)
.area GSINIT4 (CODE)
.area GSINIT5 (CODE)
.area GSINIT (CODE)
.area GSFINAL (CODE)
.area CSEG (CODE)
.area HOME (CODE)
__sdcc_banked_call::
push _PSBANK
xch a,r0
push a
mov a,r1
push a
mov a,r2
anl a,#0x1f
mov _PSBANK, a
xch a, r0
ret
__sdcc_banked_ret::
pop _PSBANK
ret
crtstart.asm
-17
View File
@@ -1,17 +0,0 @@
.area GSFINAL (CODE)
__sdcc_banked_call::
push _PSBANK
xch a,r0
push a
mov a,r1
push a
mov a,r2
anl a,#0x1f
mov _PSBANK, a
xch a, r0
ret
__sdcc_banked_ret::
pop _PSBANK
ret
dhcp.c
+22 -8
View File
@@ -41,6 +41,7 @@ __xdata uip_ipaddr_t server;
#define DHCP_REBIND_LEN 4
#define DHCP_CLIENT_ID 61
#define DHCP_CLIENT_ID_LEN 7
#define DHCP_HOSTNAME 12
#define DHCP_REQUEST_IP 50
#define DHCP_REQUEST_IP_LEN 4
#define DHCP_PARAMS 55
@@ -71,18 +72,13 @@ struct dhcp_pkt {
uint8_t cookie[4];
};
/*
#define DHCP_P ((__xdata struct dhcp_pkt *)&uip_buf[RTL_TAG_SIZE + VLAN_TAG_SIZE])
#define DHCP_OPT ((__xdata uint8_t *)&uip_buf[RTL_TAG_SIZE + VLAN_TAG_SIZE + sizeof (struct dhcp_pkt)])
*/
#define DHCP_P ((__xdata struct dhcp_pkt *)uip_appdata)
#define DHCP_OPT ((__xdata uint8_t *)(uip_appdata) + sizeof (struct dhcp_pkt))
__xdata uint32_t long_value;
void dhcp_print_ip(uint8_t *a)
void dhcp_print_ip(__xdata uint8_t *a)
{
itoa(a[0]); write_char('.');
itoa(a[1]); write_char('.');
@@ -121,6 +117,20 @@ void dhcp_addopt_client_id(void)
}
void dhcp_addopt_hostname(void)
{
uint8_t len = 0;
while (hostname[len])
len++;
if (!len)
return;
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_HOSTNAME;
DHCP_OPT[dhcp_state.opt_ptr++] = len;
memcpy(&DHCP_OPT[dhcp_state.opt_ptr], hostname, len);
dhcp_state.opt_ptr += len;
}
void dhcp_addopt_request_ip(void)
{
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_REQUEST_IP;
@@ -157,6 +167,7 @@ void dhcp_send_discover(void)
dhcp_addopt_client_id();
dhcp_addopt_request_ip();
dhcp_addopt_hostname();
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_PARAMS;
DHCP_OPT[dhcp_state.opt_ptr++] = 3;
@@ -193,6 +204,7 @@ void dhcp_send_request(void)
dhcp_addopt_client_id();
dhcp_addopt_request_ip();
dhcp_addopt_server_id();
dhcp_addopt_hostname();
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_PARAMS;
DHCP_OPT[dhcp_state.opt_ptr++] = 3;
@@ -216,7 +228,7 @@ void dhcp_send_request(void)
}
void ip_opt(uint8_t * __xdata ip)
void ip_opt(__xdata uint8_t * ip)
{
dhcp_state.opt_ptr++;
uint8_t len = DHCP_OPT[dhcp_state.opt_ptr++];
@@ -353,8 +365,10 @@ void dhcp_stop(void) __banked
}
void dhcp_callback(void) __banked
void dhcp_callback(uint16_t lport) __banked
{
if (lport != HTONS(DHCPC_CLIENT_PORT)) // Is this call for us? If not, ignore it
return;
if (!dhcp_state.state)
return;
if (uip_closed()) {
dhcp.h
+2 -7
View File
@@ -16,7 +16,7 @@
void dhcp_start(void) __banked;
void dhcp_stop(void) __banked;
// void dhcp_periodic(void) __banked;
void dhcp_callback(void) __banked;
void dhcp_callback(uint16_t lport) __banked;
struct dhcp_state {
@@ -35,14 +35,9 @@ struct dhcp_state {
uint32_t rebind;
uint32_t renewal;
struct uip_udp_conn *conn;
__xdata struct uip_udp_conn *conn;
};
typedef struct dhcp_state uip_udp_appstate_t;
/* Finally we define the application function to be called by uIP. */
#ifndef UIP_UDP_APPCALL
#define UIP_UDP_APPCALL dhcp_callback
#endif /* UIP_APPCALL */
#endif
doc/automation.md
+32
View File
@@ -0,0 +1,32 @@
# Automation
## Upload
You can automate upload of the firmware via WEB with curl:
1. Authorize with /login endpoint and save cookie:
```bash
curl -c cookies.txt http://${SWITCH_IP}/login -d pwd=${PASSWORD} -i
```
This will save session cookie in cookies.txt
2. Send the firmware via form:
```bash
curl -b cookies.txt http://${SWITCH_IP}/upload -F "uploadedfile=@${FIRMWARE_FILE_PATH}" -i
```
You can expect that server will close connection, without responding to request.
Wait for SWITCH_IP to be responding again.
## Port status
In similar way to upload, you can fetch the json status of the ports.
1. Get the session cookie as for upload.
2. Hit the `/status.json` with cookie:
```bash
curl -b cookies.txt http://${SWITCH_IP}/status.json
```
doc/devices/2M-PCB23-V2_2.md
+177
View File
@@ -0,0 +1,177 @@
### 2M-PCB23-V2.2
## Brands
| Brand | Type | Managed | PCB | Flash | Chip RTL |
|----------|-----------------|---------|---------------|-------|-------------|
| keepLINK | KP-9000-9XHML-X | Yes | 2M-PCB23-V2.2 | 2M | 8373 + 8224 |
## PCB
<img src="photos/2M-PCB23-V2.2-managed/2M-PCB23-V2.2-top.jpg" width="300" />
## Port overview
```
┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ ┌──────────┐ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP(J13) │ │
│ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ PORT 9 │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ PORT 5 │ │ PORT 6 │ │ PORT 7 │ │ PORT 8 │ │ MAC 8 │ O (PWR) │
│ O │ MAC 0 │ │ MAC 1 │ │ MAC 2 │ │ MAC 3 │ │ MAC 4 │ │ MAC 5 │ │ MAC 6 │ │ MAC 7 │ │ SerDes 1 │ O (SFP) │
│ RST └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └──────────┘ │
└─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
```
# Connectors
### J13, SFP connector
| SFP Pin | Signal | GPIO | Notes |
| ------- | ----------------- | ------ | ------------------------------ |
| 2 | TX_FAULT | ?? | |
| 3 | TX_DISABLE | ?? | |
| 4 | MODDEF2 – SDA | GPIO39 | |
| 5 | MODDEF1 – SCL | GPIO40 | |
| 6 | MODDEF0 – PRESENT | GPIO30 | "OE Exist" reported by `fiber` |
| 7 | RATE SEL | ?? | |
| 8 | LOS | GPIO37 | "OE LOS" reported by `fiber` |
| 9 | TO? | ?? | |
### T5, serial console
| pin | GPIO | Signal |
| --- | ------ | -------------- |
| 1 | GPIO32 | U0RXD (Input) |
| 2 | GND | Ground |
| 3 | GPIO31 | U0TXD (Output) |
### S1, unknown connector
| pin | GPIO | Signal |
| --- | -------- | -------------- |
| 1 | ??? | |
| x | | |
| 3 | ??? | |
| 4 | ??? | |
| 5 | ??? | |
Potentially slave interface or SMI.
### U7, flash memory
Flash chip is FM25Q16A.
### Reset button
GPIO54
## Register values
As probed with `regget` on stock firmware "V1.6".
### Model
| Name | Addr | Value |
| ------------------------- | ------ | ---------- |
| MODEL_NAME_INFO | 0x0004 | 0x83730000 |
| CHIP_MODE_INFO | 0x0008 | 0x00008000 |
| CHIP_INFO | 0x000C | 0x00300000 |
### GPIO
| Name | Addr | Value |
| ------------------------- | ------ | ---------- |
| GPIO_OUT0 | 0x003c | 0x10000000 |
| GPIO_OUT1 | 0x0040 | 0x00000010 |
| GPIO_OE0 | 0x004c | 0x10000000 |
| GPIO_OE1 | 0x0050 | 0x00000010 |
| BOND_INFO | 0x7f60 | 0x00000fff |
| STRAP_INFO | 0x7f64 | 0x0002f515 |
| IO_DRVING_0 | 0x7f68 | 0x00000000 |
| IO_DRVING_1 | 0x7f6c | 0x00000000 |
| IO_DRVING_2 | 0x7f70 | 0x00000000 |
| IO_SLEW_0 | 0x7f74 | 0x00000000 |
| IO_SLEW_1 | 0x7f78 | 0x00000000 |
| IO_SLEW_2 | 0x7f7c | 0x00000000 |
| IO_SMT_EN_0 | 0x7f80 | 0xffffffff |
| IO_SMT_EN_1 | 0x7f84 | 0xffffffff |
| IO_SMT_EN_2 | 0x7f88 | 0x0003ffff |
| IO_MUX_SEL_0 | 0x7f8c | 0x28000000 |
| IO_MUX_SEL_1 | 0x7f90 | 0x40000041 |
| IO_MUX_SEL_2 | 0x7f94 | 0x00000000 |
### LED
| Name | Addr | Value |
| ------------------------- | ------ | ---------- |
| LED_GLB_CTRL | 0x6520 | 0x0023e0f0 |
| LED3_0_SET3_2_CTRL1 | 0x6524 | 0xff001400 |
| LED3_0_SET1_0_CTRL1 | 0x6528 | 0x000f0000 |
| LED3_2_SET3_CTRL0 | 0x652c | 0x007f013f |
| LED1_0_SET3_CTRL0 | 0x6530 | 0x02000400 |
| LED3_2_SET2_CTRL0 | 0x6534 | 0x01400141 |
| LED1_0_SET2_CTRL0 | 0x6538 | 0x01440170 |
| LED3_2_SET1_CTRL0 | 0x653c | 0x18000041 |
| LED1_0_SET1_CTRL0 | 0x6540 | 0x0044017f |
| LED3_2_SET0_CTRL0 | 0x6544 | 0x00000044 |
| LED1_0_SET0_CTRL0 | 0x6548 | 0x00410175 |
| LED_PORT_SET_SEL_CTRL | 0x654c | 0x00010000 |
| SW_LED_LOAD | 0x6550 | 0x00000000 |
| LED_PORT_SW_EN_CTRL[0..7] | 0x6554 | 0x00000000 |
| LED_PORT_SW_EN_CTRL[8] | 0x6558 | 0x00000000 |
| LED_PORT_SW_CTRL[0] | 0x655c | 0x00000000 |
| LED_PORT_SW_CTRL[1] | 0x6560 | 0x00000000 |
| LED_PORT_SW_CTRL[2] | 0x6564 | 0x00000000 |
| LED_PORT_SW_CTRL[3] | 0x6568 | 0x00000000 |
| LED_PORT_SW_CTRL[4] | 0x656c | 0x00000000 |
| LED_PORT_SW_CTRL[5] | 0x6570 | 0x00000000 |
| LED_PORT_SW_CTRL[6] | 0x6574 | 0x00000000 |
| LED_PORT_SW_CTRL[7] | 0x6578 | 0x00000000 |
| LED_PORT_SW_CTRL[8] | 0x657c | 0x00000000 |
| LED_LOAD_LV1_10G | 0x6580 | 0x000fa000 |
| LED_LOAD_LV2_10G | 0x6584 | 0x00271000 |
| LED_LOAD_LV3_10G | 0x6588 | 0x004e2000 |
| LED_LOAD_LV1_5G | 0x658c | 0x000fa000 |
| LED_LOAD_LV2_5G | 0x6590 | 0x00271000 |
| LED_LOAD_LV3_5G | 0x6594 | 0x004e2000 |
| LED_LOAD_LV1_2P5G | 0x6598 | 0x000fa000 |
| LED_LOAD_LV2_2P5G | 0x659c | 0x00271000 |
| LED_LOAD_LV3_2P5G | 0x65a0 | 0x004e2000 |
| LED_LOAD_LV1_1G | 0x65a4 | 0x000fa000 |
| LED_LOAD_LV2_1G | 0x65a8 | 0x00271000 |
| LED_LOAD_LV3_1G | 0x65ac | 0x004e2000 |
| LED_LOAD_LV1_500M | 0x65b0 | 0x0007d000 |
| LED_LOAD_LV2_500M | 0x65b4 | 0x00138800 |
| LED_LOAD_LV3_500M | 0x65b8 | 0x00271000 |
| LED_LOAD_LV1_100M | 0x65bc | 0x00019000 |
| LED_LOAD_LV2_100M | 0x65c0 | 0x0003e800 |
| LED_LOAD_LV3_100M | 0x65c4 | 0x0007d000 |
| LED_LOAD_LV1_10M | 0x65c8 | 0x00002800 |
| LED_LOAD_LV2_10M | 0x65cc | 0x00006400 |
| LED_LOAD_LV3_10M | 0x65d0 | 0x0000c800 |
| LED_P_LOAD_CTRL | 0x65d4 | 0x00000000 |
| LED_GLB_ACTIVE | 0x65d8 | 0x3ffbedff |
| LED_GLB_IO_EN | 0x65dc | 0x77ffffff |
| LED_GLB_MUX_1 | 0c65e0 | 0x05102040 |
| LED_GLB_MUX_2 | 0x65e4 | 0x0c289206 |
| LED_GLB_MUX_3 | 0x65e8 | 0x1245038d |
| LED_GLB_MUX_4 | 0x65ec | 0x19616554 |
| LED_GLB_MUX_5 | 0x65f0 | 0x2079d71a |
| LED_GLB_MUX_6 | 0x65f4 | 0x000238a1 |
| LED_RLDP_CTRL_1 | 0x65f8 | 0x00000019 |
| LED_RLDP_CTRL_2 | 0x65fc | 0xffffffff |
| LED_RLDP_CTRL_3 | 0x6600 | 0x00006600 |
| LED_DUMY_0_ADDR | 0x6604 | 0x00000000 |
| LED_DUMY_1_ADDR | 0x6608 | 0x00000000 |
# LEDs
| Name | Components | Controlled by |
| ----------------------------- | --------------------------- | -------------------------- |
| RJ45 Right Green ("LINK/ACT") | | RJ45 LED0 |
| RJ45 Left Orange ("2.5G") | | RJ45 LED1 |
| RJ45 Left Green ("1G") | | RJ45 LED2 |
| "P" (PWR) | Top LED in "LED6" stack | probably pulled from Vcc |
| SFP Link ("9") | Bottom LED in "LED6" stack | SFP LED0 |
| ?? | D23 | SFP LED1 |
| ?? | D22 | SFP LED2 |
doc/devices/2M-PCB43-V1.1.md
+55
View File
@@ -0,0 +1,55 @@
# 2G040210GSM
The following is a documentation for the managed switch marked as `2G040210GSM`
and sold by Mokerlink.
### Label specifications
- **Name**: 4-port 2.5G Web Managed Switch
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
- **Power**: 12V DC, 1A barrel connector
### What works
The device is fully supported:
- All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware (use KP_9000_6XHML_X2 in machine.h if building yourself or the corresponding pre-compiled binary)
- untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
### Hardware overview
Front
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-front.jpeg" width="300" />
Label
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-label.jpeg" width="300" />
### PCB overview
**Board markings**
- Top silkscreen: 2M-PCB43-V1.1
Top side
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-top.jpeg" width="300" />
Bottom
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-bottom.jpeg" width="300" />
### J1, serial console
| `J8` pin | Signal |
| -------- | ----------- |
| 1 | RX (Input) |
| 2 | TX (Output) |
| 3 | GND |
| 4 | 3V3 |
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/FG-4GT-2SX_V2.0.md
+39
View File
@@ -0,0 +1,39 @@
# FG-4GT-2SX_V2.0
Following is documentation for unmanaged switch marked as `FG-4GT-2SX_V2.0`.
Original software is running UART on 9600 baud rate.
## Brands
* Ruiying RY-4GT-2SX
<img src="photos/FG-4GT-2SX_V2.0/RY-4GT-2SX_label.jpg" width="300" />
## What works
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Both SFP ports supporting 1G, 2.5G and 10G modules
- LEDs
## PCB overview
**Board markings**
- Top silkscreen: FG-4GT-2SX_V2.0
Front panel
<img src="photos/FG-4GT-2SX_V2.0/chassis-front.jpg" width="300" />
Top side
<img src="photos/FG-4GT-2SX_V2.0/PCB-top.jpg" width="300" />
Bottom
<img src="photos/FG-4GT-2SX_V2.0/PCB-bottom.jpg" width="300" />
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/FNS-1200P.md
+93
View File
@@ -0,0 +1,93 @@
# FOXNEO FNS-1200P
RTL8372-based 4×2.5G PoE+ + 2×SFP+ unmanaged switch.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Manufacturer**: FOXNEO
- **Model**: FNS-1200P
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps with PoE+
- 2 × SFP+: 1G / 2.5G / 10G
### What works
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps (PoE+ is not configurable via RTLPlayground)
- Both SFP+ ports supporting 1G, 2.5G and 10G modules
- LEDs: amber (2.5G) and green (1G/100M/10M) per copper port; combined link/act on SFP ports
### PCB overview
**Board markings**
- Top silkscreen: PCB-K0402W-U13-V2.0 / DIP-K0402WB-V2.0
**Key components**
- U3: SPI NOR flash, 2 MiB
- U7: unpopulated SOP8 footprint — I2C bus (RTL8372 slave at 0x5c) is accessible from its pads, useful for register dumps
- S1: unpopulated slide switch footprint (three through-holes used as serial console)
Front panel
<img src="photos/FNS-1200P/chassis-front.jpg" width="400" />
Top side (PCB)
<img src="photos/FNS-1200P/PCB-top.jpg" width="300" />
### Port layout
| Front panel position | Logical port | Physical port | Type |
|----------------------|--------------|---------------|---------|
| SFP left | 8 | 5 | SFP+ |
| RJ45 1 | 4 | 1 | Copper |
| RJ45 2 | 5 | 2 | Copper |
| RJ45 3 | 6 | 3 | Copper |
| RJ45 4 | 7 | 4 | Copper |
| SFP right | 3 | 6 | SFP+ |
### Serial console
The PCB has three unpopulated through-holes intended for a slide switch, directly connected to UART0.
Numbered from the left (SFP port side), the pinout is:
| Position (left→right) | Signal | GPIO |
|-----------------------|--------|--------------------------|
| 1 (leftmost) | RX | GPIO32\_UART0\_RX (32) |
| 2 (middle) | GND | GND |
| 3 (rightmost) | TX | GPIO31\_UART0\_TX (31) |
- **Settings**: 115200 baud / 8N1 / 3.3V TTL
- Connect a USB-TTL adapter: adapter TX → pin 1, GND → pin 2, adapter RX → pin 3
### LED configuration
Copper ports use LED SET0, SFP ports use LED SET1.
| SET | LED0 | LED2 |
|------|--------------------------------------------------|---------------------------------------------------|
| SET0 | Amber — lights on 2.5G link | Green — lights on 1G / 100M / 10M link |
| SET1 | All speeds — lights on any link with activity | — |
LED pad to physical port mapping:
| GPIO pads | Port |
|-----------|-------------------------|
| GPIO8–11 | Physical port 5 (left SFP) |
| GPIO12–14 | Physical port 1 (RJ45 1) |
| GPIO15–17 | Physical port 2 (RJ45 2) |
| GPIO18–20 | Physical port 3 (RJ45 3) |
| GPIO21–23 | Physical port 4 (RJ45 4) |
| GPIO24–27 | Physical port 6 (right SFP) |
### SFP GPIO assignments
| SFP | pin\_detect (ModAbs) | pin\_los | SerDes | I2C SDA | I2C SCL |
|------------------|-----------------------------|------------------------|--------|----------------------|--------------------------|
| Left (logical 8) | GPIO30\_ACL\_BIT3\_EN | GPIO37 | SDS1 | GPIO39\_I2C\_SDA4 | GPIO40\_I2C\_SCL3\_MDC1 |
| Right (logical 3)| GPIO50\_I2C\_SCL2\_UART1\_TX | GPIO51\_I2C\_SDA2\_UART1\_RX | SDS0 | GPIO41\_I2C\_SDA3\_MDIO1 | GPIO40\_I2C\_SCL3\_MDC1 |
GPIO assignments were verified by observing GPIO state changes during SFP module insertion/removal
and cross-checked against an original firmware register dump.
`pin_tx_disable` is GPIO\_NA on both ports (original firmware keeps all GPIOs as inputs).
doc/devices/HI-K0402WS.md
-62
View File
@@ -1,62 +0,0 @@
# Hisource Hi-K0402WS
Following is documentation for unmanaged switch marked as `Hi-K0402WS`.
Original software is running UART on 9600 baud rate.
Using SPI clamp in-board is the only method for initial installation.
The board has two flash chips `BY25Q16BS` with 16M-bit size. The front switch, switches between the two flash chips.
These can be programed independently by using said switch - so it is e.g. possible to run the original and new firmware in parallel.
### Label specifications
- **Name**: 2.5G Ethernet Switch
- **Model**: Hi-K0402WS
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP: 1000 / 2500 / 10000 Mbps
### What works (expected from label + similar devices)
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Both SFP ports supporting 1G, 2.5G and 10G modules
- LEDs
### PCB overview
**Board markings**
- Top silkscreen: PCB-KO4022W-V3.0 / DIP-KO4022WS-V3.0
Top side
<img src="photos/K0402W-V3.0-unmanaged\PCB-top.jpg" width="300" />
Bottom
<img src="photos/K0402W-V3.0-unmanaged\PCB-bottom.jpg" width="300" />
### T2, serial console
| `J2` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | RX (Input) |
| 3 | TX (Output) |
| 4 | GND |
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
Board has two supply rails. `0.95` and `3.3` volt.
### `0.95` Core Voltage
Voltage is made by a `Techcode TD1720` .
### `3.3` Voltage
Voltage is created by chip marked as `Techcode TD1720`.
**There seems to have been a miscalculation when choosing the inductor and the device is ~25% more efficient with an 5V power supply.**
doc/devices/HI-K0801WS.md
+36
View File
@@ -0,0 +1,36 @@
# Hisource Hi-K0801WS
Following is documentation for unmanaged switch marked as `Hi-K0801WS`.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Name**: 2.5G Ethernet Switch
- **Model**: Hi-K0801WS
- **Ports**:
- 8 × RJ45: 10/100/1000/2500 Mbps
- 1 × SFP: 1000 / 2500 / 10000 Mbps
### What works (expected from label + similar devices)
- All eight 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- SFP port supporting 1G, 2.5G and 10G modules
- LEDs
### PCB overview
**Board markings**
- Top silkscreen: PCB-KO801W-V2.0 / DIP-KO801WS-V2.0
Top side
<img src="photos/K0801W-V2.0-unmanaged\PCB-top.jpg" width="300" />
Bottom
<img src="photos/K0801W-V2.0-unmanaged\PCB-bottom.jpg" width="300" />
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/K0501W_V2_0.md
+23
View File
@@ -0,0 +1,23 @@
# K0501W V2.0
This board appears for example in the Davuaz Da-K6501W switch.
The general design of the board is similar to Hi-K0402WS V3.0.
However, there are several differences:
- One SFP port is replaced by a RTL8221B 2.5G PHY
- Only one LED is populated for the SFP port
- No mode switch and only one flash chip
- Older design using RTL8372 instead of RTL8372N (which also means different GPIO and LED configuration)
- Like earlier versions of the K0402W(S) board, there is no UART
All ports and LEDs are supported.
Installation is possible using a flash programmer.
The BoyaMicro 25Q16BSSIG flash chip is supported by flashprog with chip name "B.25D16AS/BY25Q16BS/BY25Q16ES".
## PCB pictures
The board is marked `PCB-K0501W-V2.0 DIP-K0501WS-V2.0`.
<img src="photos/K0501W_V2_0/pcb-top.jpg" width="300" />
<img src="photos/K0501W_V2_0/pcb-bottom.jpg" width="300" />
doc/devices/KP-9000-6XH-X2.md
+57
View File
@@ -0,0 +1,57 @@
# Keeplink KP-9000-6XH-X2
Following is documentation for unmanaged switch marked as `KP-9000-6XH-X2`.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Name**: 4X 2.5G RJ45 Port + 2 X 10G SFP+ Port
- **Model**: KP-9000-6XH-X2
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
### What works
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- SFP port with 10G modules
- LEDs
- untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
### Hardware overview
Front side:
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-front.jpg" width="600" />
Label:
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-label.jpg" width="600" />
### PCB overview
**Board markings**
- Top silkscreen: 2M-PCB43-V2.1
Top side
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-top.jpg" width="600" />
Bottom
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-bottom.jpg" width="600" />
## Reset Button
There's an unpopulated Reset button on the front left side of the PCB.
It can easily be soldered, you'll need an 4.5mmx4.5mm 90° button switch with a 3-pin footprint.
I got mine here: https://de.aliexpress.com/item/1005007295346702.html
The front case has already the hole in the metal case, you just have to punch a hole through the foil.
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/PCB-K0402WS-V3.0.md
+76
View File
@@ -0,0 +1,76 @@
# PCB-K0402WS-V3.0
Following is documentation for a variety of unmanaged switch internally marked as `PCB-K0402WS-V3.0`. They are sold under many brands.
Original software is running UART on 9600 baud rate.
Note during opening the device: there might be a hidden 5th screw on the back
of the device just above the big label, might be covered by a QC sticker.
### Brands
* Hisource Hi-K0402WS
<img src="photos/PCB-K0402WS-V3.0/HiSource_HI-K0402WS.jpg" width="300" />
* Ztyuav Z-QWYT0402
<img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402.jpg" width="300" />
<img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402_label.jpg" width="300" />
### Programming
Using SPI clamp in-board is the only method for initial installation.
The board has two flash chips `BY25Q16BS` with 16M-bit size. The front switch, switches between the two flash chips.
These can be programed independently by using said switch - so it is e.g. possible to run the original and new firmware in parallel.
The switch actually controls the HOLD line of each flash chip, and toggling the switch results in a reboot.
If the programming clip keeps HOLD not connected, the flashing will commence on whatever the switch selected, regardless on which chip was clipped.
For the initial flash (at least with flashrom), the bin file produced by the build is much smaller than the flash chip, it is suggested to pad the file to keep flashrom happy: `truncate -s 2097152 rtlplayground-*-PCB_K0402WS_V3.bin`. Note: do not then proceed to use this resulting padded file for the web flashing (as it bricks the device), use the original unpadded .bin.
### What works (expected from label + similar devices)
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Both SFP ports supporting 1G, 2.5G and 10G modules
- LEDs
### PCB overview
**Board markings**
- Top silkscreen: PCB-KO4022W-V3.0 / DIP-KO4022WS-V3.0
Top side
<img src="photos/PCB-K0402WS-V3.0/PCB-top.jpg" width="300" />
Bottom
<img src="photos/PCB-K0402WS-V3.0/PCB-bottom.jpg" width="300" />
### T2, serial console
| `J2` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | RX (Input) |
| 3 | TX (Output) |
| 4 | GND |
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
Board has two supply rails. `0.95` and `3.3` volt.
### `0.95` Core Voltage
Voltage is made by a `Techcode TD1720` .
### `3.3` Voltage
Voltage is created by chip marked as `Techcode TD1720`.
**There seems to have been a miscalculation when choosing the inductor and the device is ~25% more efficient with an 5V power supply.**
doc/devices/STEAMEMO_IG204_V1.md
+43
View File
@@ -0,0 +1,43 @@
# Steamemo IG204-V1
Following is documentation for unmanaged switch marked as `IG204-V1`.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Name**: 2.5G Ethernet Switch
- **Model**: IG204 V1
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP: 1000 / 2500 / 10000 Mbps
### What works (expected from label + similar devices)
- Four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Two SFP ports supporting 1G, 2.5G and 10G modules
- LEDs
### PCB overview
**Board markings**
- Top silkscreen: PB-2131
Top side
<img src="photos/STEAMEMO_IG204_V1/PCB-top.jpg" width="600" />
### Connectors
### T7, serial console
| `T7` pin | Signal |
| -------- | ----------- |
| 1 | TX (Output) |
| 2 | GND |
| 3 | RX (Input) |
| 4 | 3V3 |
### Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/SWTG018AS_A_V2_0.md
+6
View File
@@ -1,4 +1,10 @@
# SWTG018AS-A V2.0
## Brands
| Brand | Type |Managed| PCB | Flash | Chip RTL |
|--------|------------------|-------|------------------|-----------------|---------------|
| Ampcom | SWTG018AS-A V2.0 | No | SWTG018AS-A V2.0 | 2MB | 8273N + 8224N |
| Horaco | HC-SWTGW218AS-A | Yes | SWTG018AS-A V2.0 | 2MB(25Q16JVSIQ) | 8273N + 8224N |
The following is a documentation for the unmanaged switch marked as `SWTG018AS-A V2.0`.
It is e.g. sold under the Ampcom brand, but no branh-markings are found on the device.
doc/devices/SWTG024AS-A-V2.0.1_4C_2SFP.md
+43
View File
@@ -0,0 +1,43 @@
### SWTG024AS-A-V2.0.1_4C_2SFP
It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| Horaco | ZX-SG4T2 | | PCB-SWTG024AS-A-V2.0.1_19650 | P25D40SH | ??? |
### Label specifications
- **Name**:
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-label.jpg" width="300" />
### What works
The device is fully supported:
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
### PCB overview
**Board markings**
- Top silkscreen: PCB-SWTG024AS-A-V2.0.1_19650
Top side
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-top.jpg" width="300" />
Bottom
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | GND |
| 3 | RX (Input) |
| 4 | TX (Output) |
doc/devices/SWTG024AS-A-V2.0.1_5C_1SFP.md
+44
View File
@@ -0,0 +1,44 @@
### SWTG024AS-A-V2.0.1_5C_1SFP
It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| Horaco | HC-SWTGW215AS | | PCB-SWTG024AS-A-V2.0.1_19650 | W25Q16JV | 8272N |
### Label specifications
- **Name**:
- **Ports**:
- 5 × RJ45: 10/100/1000/2500 Mbps
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
<!-- <img src="" width="300" /> -->
### What works
The device is fully supported:
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware
### PCB overview
**Board markings**
- Top silkscreen: PCB-SWTG024AS-A-V2.0.1_19650
Top side
<!-- <img src="" width="300" /> -->
Bottom
<!-- <img src="" width="300" /> -->
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | GND |
| 3 | RX (Input) |
| 4 | TX (Output) |
doc/devices/SWTG024AS-V2.0.md
+49
View File
@@ -0,0 +1,49 @@
### SWTG024AS-V2.0
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| hongyavision | LG-SG5T1 | No | PCB-SWTG024AS-V2.0_16895 | 25Q40 | 8272 |
### Label specifications
- **Name**:
- **Ports**:
- 5 × RJ45: 10/100/1000/2500 Mbps
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
- **Power**: 12V DC, 1A 5525 connector
<img src="photos/SWTG024AS-V2.0/label.jpg" width="300" />
### What works
The device is fully supported:
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware
- Online update does not work with 512KiB flash.
### PCB overview
**Board markings**
- Top silkscreen: PCB-SWTG024AS-V2.0
Top side
<img src="photos/SWTG024AS-V2.0/pcb_top.jpg" width="300" />
Bottom
<img src="photos/SWTG024AS-V2.0/pcb_bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | GND |
| 2 | RX (Input) |
| 3 | TX (Output) |
Note,`R52`、`R53`may not be installed.You need to bridge them using either solder or resistors.
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/SWTG024AS.md
+2 -2
View File
@@ -9,8 +9,8 @@ Also the RJ45 connectors can be all plastic/non-shielded or with metal shielding
|Brand|Type|Managed|PCB|PCB Label|Flash|Chip RTL|
|---|---|---|---|---|---|---|
| LIANGUO |SWTG024AS |No| SWTG024AS-v2.0-17452 | CM-23-11-2336 023-17453| 512 KiB | 8272 |
| Haraco |ZX-SWTG124AS | Yes | SWTG024AS-v2.0 | ??? | ??? | 8272 |
| Xikestore |SKS3200M-4GPY2XF | Yes | SWTG024AS-v1.0 | CM-23-08-2043 023-16721 | ??? | 8272 |
| Horaco |ZX-SWTG124AS | Yes | SWTG024AS-v2.0 | ??? | ??? | 8272 |
| Xikestore |SKS3200M-4GPY2XF | Yes | SWTG024AS-v1.0 | CM-23-08-2043 023-16721 | 2048 KiB | 8272 |
| Sodola | SL-SWTG124AS-D | Yes | SWTG024AS-v2.0-17452 | ??? | 2048 KiB | 8272 |
## PCB
doc/devices/SWTGW215AS.md
+164
View File
@@ -0,0 +1,164 @@
### ZX-SWTGW215AS
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| Lianguo | ZX-SWTGW215AS | Yes | PCB-SWTG115AS-V2.0 | FM25Q16A | 8272 |
## RTLPlayground target
Use machine target `MACHINE_LIANGUO_ZX_SWTGW215AS` for this device.
Physical hardware verification: 5x RJ45 ports + 1x SFP port.
Port 5 RJ45 is interfaced through a RTL8221B IC.
## PCB
<img src="photos/ZX-SWTGW215AS/pcb_top.jpg" width="300" />
# Connectors
## Port overview
```
┌──────────────────────────────────────────────────────────────────────────────────┐
│ ┌──────────┐ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP (J4) │ │
│ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ PORT 6 │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ PORT 5 │ │ LOG 8 │ │
│ O │ LOG 4 │ │ LOG 5 │ │ LOG 6 │ │ LOG 7 │ │ LOG 3 │ │ SerDes 1 │ │
│ RST └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └──────────┘ │
└──────────────────────────────────────────────────────────────────────────────────┘
```
| Type | RTLPlayground logical ports | Physical index |
|---|---|---|
| RJ45 | 3, 4, 5, 6, 7 | 1-5 |
| SFP | 8 | 6 |
## J4
* Location: SFP connector `J4`.
* Connected to: 10GMAC number 8, SerDes 1.
|`J4` SFP PINs | Signal | GPIO | Notes |
|---|---|---|---|
|3| TX_DISABLE | GPIO_NA | Not connected |
|4| MODDEF2 – SDA | GPIO39 | I2C SDA |
|5| MODDEF1 – SCL | GPIO40 | I2C SCL |
|6| MODDEF0 – PRESENT | GPIO30 | Detect |
|8| LOS | GPIO37 | RX Loss of Signal |
### Notes
* Not all signals were mapped mechanically, hence they've been left out of documentation.
## T3, Slave Interface
This connector goes to U4 `I2C EEPROM` and U10 `SPI FLASH` (mappings identical to SWTG024AS).
For detailed Slave Interface functionality and protocol information, see [T3 documentation in SWTG024AS.md](SWTG024AS.md#t3-slave-interface).
|`T3` pin|what|Signal|
|---|---|---|
|1| U4-P6, 33R U10-P6 | I2C-SCL, SPI-CLK, Slave SCK/SCL/MDC/EE_SCL |
|2| GND | --- |
|3| U4-P5, U10-P5 | I2C-SDA, SPI-DI/DO, Slave SDI/SDA/MDIO/EE_SDA |
|4| VCC |
|5| 33R -> U10-P2 | SPI-DO/D1 |
|6| U10-P1 | SPI-CS |
### Notes
* 1 pin is square shaped.
## T5, Serial Console
|`T5` pin|GPIO|Signal|
|---|---|---|
| 1 | GPIO31 | U0TXD (Output) |
| 2 | GND | |
| 3 | GPIO32 | U0RXD (Input) |
| 4 | 3V3 | |
### Notes
* 1 pin is square shaped.
## T8
|`T8` pin|GPIO|Signal|
|---|---|---|
| 1 | GPIO46 | |
| 2 | GND | |
| 3 | GPIO48 | |
| 4 | 3V3 | |
| 5 | GPIO47 | |
| 6 | GPIO49 | |
### Notes
* 1 pin is square shaped.
* Mapping unverified but assumed the same as [LIANGUO SWTG024AS](SWTG024AS.md#t8).
# Reset Circuit
| Function | GPIO |
|---|---|
| Reset button | GPIO54 |
### Notes
* Circuit is active-low
# GPIO
Note: T3/U4/U10-related signal annotations below are copied from [LIANGUO SWTG024AS T3 section](SWTG024AS.md#t3-slave-interface) as well as T8 port from [LIANGUO SWTG024AS T8 section](SWTG024AS.md#t8). They should be treated as assumed identical for ZX-SWTGW215AS as it has not been 100% confirmed true at the moment.
| HEX VAL. | GPIO | Component / Purpose | Notes | | GPIO | Component / Purpose | Notes |
| -------- | ------ | ---- | ---- | ---- | ---- | ---- | ---- |
| 00000001 | GPIO00 | | | | GPIO32 | T5-3 | U0RXD |
| 00000002 | GPIO01 | | | | GPIO33 | | |
| 00000004 | GPIO02 | | | | GPIO34 | | |
| 00000008 | GPIO03 | | | | GPIO35 | | |
| 00000010 | GPIO04 | | | | GPIO36 | | |
| 00000020 | GPIO05 | | | | GPIO37 | J4-8 | SFP LOS |
| 00000040 | GPIO06 | | | | GPIO38 | | |
| 00000080 | GPIO07 | | | | GPIO39 | J4-4 | SFP I2C SDA |
| 00000100 | GPIO08 | | | | GPIO40 | J4-5 | SFP I2C SCL |
| 00000200 | GPIO09 | | | | GPIO41 | | |
| 00000400 | GPIO10 | | | | GPIO42 | U10-P6, U4-P6, T3-1 | SPI FLASH CLK / I2C-SCL (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00000800 | GPIO11 | | | | GPIO43 | U10-P5, U4-P5, T3-3 | SPI FLASH DI/IO0 / I2C-SDA (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00001000 | GPIO12 | | | | GPIO44 | U10-P2, T3-5 | SPI FLASH DO/IO1 (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00002000 | GPIO13 | PORT1 LED GREEN | | | GPIO45 | U10-P1, T3-6 | SPI FLASH CS (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00004000 | GPIO14 | PORT1 LED ORANGE | | | GPIO46 | T8-1 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00008000 | GPIO15 | | | | GPIO47 | T8-5 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00010000 | GPIO16 | PORT2 LED GREEN | | | GPIO48 | T8-3 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00020000 | GPIO17 | PORT2 LED ORANGE | | | GPIO49 | T8-6 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00040000 | GPIO18 | PORT3 LED GREEN | | | GPIO50 | | |
| 00080000 | GPIO19 | PORT3 LED ORANGE | | | GPIO51 | | |
| 00100000 | GPIO20 | PORT4 LED GREEN | | | GPIO52 | | |
| 00200000 | GPIO21 | PORT4 LED ORANGE | | | GPIO53 | | |
| 00400000 | GPIO22 | PORT5 LED GREEN | | | GPIO54 | Reset Button | GPIO54_ACL_BIT2_EN |
| 00800000 | GPIO23 | PORT5 LED ORANGE | | | GPIO55 | | |
| 01000000 | GPIO24 | SFP LED GREEN | J4 | | GPIO56 | | |
| 02000000 | GPIO25 | | | | GPIO57 | | |
| 04000000 | GPIO26 | | | | GPIO58 | | |
| 08000000 | GPIO27 | | | | GPIO59 | | |
| 10000000 | GPIO28 | LED-SYSTEM | | | GPIO60 | | |
| 20000000 | GPIO29 | | | | GPIO61 | | |
| 40000000 | GPIO30 | J4-6 | SFP DETECT | | GPIO62 | | |
| 80000000 | GPIO31 | T5-1 | U0TXD | | GPIO63 | | |
# LEDs
| NAME | GPIO | Port(s) | Function | Notes |
| ---- | ---- | ---- | ---- | ---- |
| PORT1 LED GREEN | GPIO13 |5| Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT1 LED ORANGE | GPIO14 | 5 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT2 LED GREEN | GPIO16 | 4 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT2 LED ORANGE | GPIO17 | 4 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT3 LED GREEN | GPIO18 | 3 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT3 LED ORANGE | GPIO19 | 3 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT4 LED GREEN | GPIO20 | 2 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT4 LED ORANGE | GPIO21 | 2 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT5 LED GREEN | GPIO22 | 1 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT5 LED ORANGE | GPIO23 | 1 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| SFP LED GREEN | GPIO24 | 6 (SFP J4) | Multi-speed | LEDS_10G, LEDS_5G, LEDS_2G5, LEDS_1G, LEDS_100M, LEDS_LINK, LEDS_ACT |
| LED-SYSTEM | GPIO28 | --- | System status | --- |
## Notes
While [SWTG024AS.md](SWTG024AS.md) can be used as a general reference for hardware concepts and interface specifications, this device should not be assumed to be identical beside the difference implicitely highlighted below. Not all information has been validated for compatibility with the SWTG215AS. Consult the SWTG024AS documentation with caution and verify any critical details against this device's.
doc/devices/SWTGW218AS.md
+1
View File
@@ -6,6 +6,7 @@
| Mokerlink | ZX-SWTGW218AS | Yes| SWTG118AS-V2.0-16029 | 2MB (FM25Q16A)| 8273N + 8224N |
| Sodola | | | | | |
| Horaco | | | | | |
| XikeStor | SKS3200-8E1X | Yes | SWTG118AS-V2.1-17462 | 2MB (25Q16JVSIQ) | |
## Photos
doc/devices/TEG-S562.md
+12 -13
View File
@@ -14,10 +14,11 @@ The memory chip is `Winbond W25Q16JV` with 16M-bit size.
1. 2.5G ports on all advertised speeds.
2. SFP+ communication.
3. Serial, Web UI.
4. All LEDs
## Known issues
1. LEDs are not initialized properly.
None.
## PCB
@@ -38,10 +39,10 @@ Bottom
```
┌─────────────────────────────────────────────────────────────────────────────┐
│ ┌──────────┐ ┌──────────┐ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP │ │ SFP │ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP 2 │ │ SFP 1 │ │
│ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ PORT 5 │ │ PORT 6 │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ MAC ? │ │ MAC ? │ │
│ │ MAC 4 │ │ MAC 5 │ │ MAC 6 │ │ MAC 7 │ │ SerDes ? │ │ SerDes ? │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ MAC 8 │ │ MAC 3 │ │
│ │ MAC 4 │ │ MAC 5 │ │ MAC 6 │ │ MAC 7 │ │ SerDes 0 │ │ SerDes 1 │ │
│ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └──────────┘ └──────────┘ │
└─────────────────────────────────────────────────────────────────────────────┘
```
@@ -105,9 +106,9 @@ GPIO mapping unknown.
| 00000002 | GPIO01 | | GPIO33 | |
| 00000004 | GPIO02 | | GPIO34 | Random changes |
| 00000008 | GPIO03 | | GPIO35 | |
| 00000010 | GPIO04 | | GPIO36 | SFP1 Present |
| 00000020 | GPIO05 | | GPIO37 | SFP1 RX Los |
| 00000040 | GPIO06 | | GPIO38 | SFP2 Present |
| 00000010 | GPIO04 | | GPIO36 | SFP2 Present |
| 00000020 | GPIO05 | | GPIO37 | SFP2 RX Los |
| 00000040 | GPIO06 | | GPIO38 | SFP1 Present |
| 00000080 | GPIO07 | | GPIO39 | |
| 00000100 | GPIO08 | | GPIO40 | |
| 00000200 | GPIO09 | | GPIO41 | |
@@ -119,11 +120,11 @@ GPIO mapping unknown.
| 00008000 | GPIO15 | PORT2 Link | GPIO47 | SFP1 I2C SDA |
| 00010000 | GPIO16 | PORT2-LED-GREEN | GPIO48 | SFP2 I2C CLK |
| 00020000 | GPIO17 | PORT2-LED-AMBER | GPIO49 | SFP2 I2C SDA |
| 00040000 | GPIO18 | PORT3 Link | GPIO50 | SFP2 Rx LOS |
| 00080000 | GPIO19 | PORT3-LED-GREEN | GPIO51 | SFP1 TX Disable |
| 00040000 | GPIO18 | PORT3 Link | GPIO50 | SFP1 Rx LOS |
| 00080000 | GPIO19 | PORT3-LED-GREEN | GPIO51 | SFP2 TX Disable |
| 00100000 | GPIO20 | PORT4-LED-AMBER | GPIO52 | |
| 00200000 | GPIO21 | PORT4 Link | GPIO53 | |
| 00400000 | GPIO22 | PORT4-LED-GREEN | GPIO54 | SFP2 TX Disable |
| 00400000 | GPIO22 | PORT4-LED-GREEN | GPIO54 | SFP1 TX Disable |
| 00800000 | GPIO23 | PORT4-LED-AMBER | GPIO55 | |
| 01000000 | GPIO24 | | GPIO56 | |
| 02000000 | GPIO25 | | GPIO57 | |
@@ -136,8 +137,6 @@ GPIO mapping unknown.
## LEDs
Leds are not yet working as in stock firmware. This will be handled later.
Ports 1-4 are amber for 100M/1G links, Green for 2.5G.
Port 5-6 are green for 10G/1G link. Both should flash on activity.
@@ -166,7 +165,7 @@ Voltage is made by a `APW8713` (U3).
### `3.3` Voltage
Voltage is crated regulated by chip marke as `GoIAT` (U2).
Voltage is crated regulated by chip marked as `GoIAT` (U2).
## SFP SPI
doc/devices/ZX310S-4T2XH.md
+59
View File
@@ -0,0 +1,59 @@
# ZX310S-4T2XH/
The following is a documentation for the managed switch marked as `ZX310S-4T2XH`
and sold by Horaco.
The original software is running UART on 57600 baud rate. The solder holes
of the UART header are filled in. In order to install a UART header, they
need to be cleared first. A 1.2mm drill can be used, alternatively a
de-soldering wick.
The original firmware uses 57600 baud 8N1
CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV (U3)
PHY RTL8261BE
### Label specifications
- **Name**:
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 1 x RJ45: 10/100/1000/2500/5000/10000 Mbps
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
- **Power**: 12V DC, 2A barrel connector
<img src="photos/ZX310S-4T2XH/label.jpg" width="300" />
### What works
The device is fully supported:
- All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The 10GBit port works. TODO: Fix EEE, speed selection
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware
### PCB overview
**Board markings**
- Top silkscreen: PCB-SL310S-4T1T1X-V1.0.1-24107
Top side
<img src="photos/ZX310S-4T2XH/pcb_top.jpg" width="300" />
Bottom
<img src="photos/ZX310S-4T2XH/pcb_bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | TX (Output) |
| 2 | RX (Input) |
| 3 | GND |
| 4 | 3V3 |
## Power supply
Input power is delivered via barell plug, `12V 2A` adapter was provided.
doc/devices/ZX310S-4T2XT.md
+53
View File
@@ -0,0 +1,53 @@
# ZX310S-4T2XT
The following is a documentation for the managed switch marked as
`ZX310S-4T2XT` and sold by Horaco.
The original software is running UART on 57600 baud rate 8N1.
CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV (U3)
PHY 2x RTL8261BE
### Label specifications
- **Name**:
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 x RJ45: 10/100/1000/2500/5000/10000 Mbps
- **Power**: 12V DC, 2A barrel connector
<img src="photos/ZX310S-4T2XT/label.jpg" width="300" />
### What works
The device is fully supported:
- All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps, including EEE
- The 10GBit ports works, including EEE.
- LEDs work with the same indiciations as the OEM firmware
### PCB overview
**Board markings**
- Top silkscreen: PCB-SL310S-4T2XT-V1.0.0-22273
Top side
<img src="photos/ZX310S-4T2XT/pcb_top.jpg" width="300" />
Bottom
<img src="photos/ZX310S-4T2XT/pcb_bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | TX (Output) |
| 2 | RX (Input) |
| 3 | GND |
| 4 | 3V3 |
## Power supply
Input power is delivered via barell plug, `12V 2A` adapter was provided.
doc/devices/photos/2M-PCB23-V2.2-managed/2M-PCB23-V2.2-bot.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 560 KiB

doc/devices/photos/2M-PCB23-V2.2-managed/2M-PCB23-V2.2-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 536 KiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-bottom.jpeg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.8 MiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-front.jpeg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 715 KiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-label.jpeg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 615 KiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-top.jpeg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.1 MiB

doc/devices/photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-front.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 71 KiB

doc/devices/photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-label.jpg → doc/devices/photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-label.jpg
View File
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 521 KiB

After

Width:  |  Height:  |  Size: 521 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/PCB-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 133 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 207 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/RY-4GT-2SX_label.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 129 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/chassis-front.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 203 KiB

doc/devices/photos/FNS-1200P/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.3 MiB

doc/devices/photos/FNS-1200P/chassis-front.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 531 KiB

doc/devices/photos/K0501W_V2_0/pcb-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 548 KiB

doc/devices/photos/K0501W_V2_0/pcb-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 505 KiB

doc/devices/photos/K0801W-V2.0-unmanaged/PCB-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.4 MiB

doc/devices/photos/K0801W-V2.0-unmanaged/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.4 MiB

doc/devices/photos/K0402W-V3.0-unmanaged/case.jpg → doc/devices/photos/PCB-K0402WS-V3.0/HiSource_HI-K0402WS.jpg
View File
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 2.6 MiB

After

Width:  |  Height:  |  Size: 2.6 MiB

doc/devices/photos/K0402W-V3.0-unmanaged/PCB-bottom.jpg → doc/devices/photos/PCB-K0402WS-V3.0/PCB-bottom.jpg
View File
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 3.1 MiB

After

Width:  |  Height:  |  Size: 3.1 MiB

doc/devices/photos/K0402W-V3.0-unmanaged/PCB-top.jpg → doc/devices/photos/PCB-K0402WS-V3.0/PCB-top.jpg
View File
Side by Side Swipe Overlay

Before

Width:  |  Height:  |  Size: 2.8 MiB

After

Width:  |  Height:  |  Size: 2.8 MiB

doc/devices/photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 67 KiB

doc/devices/photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402_label.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 152 KiB

doc/devices/photos/STEAMEMO_IG204_V1/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.2 MiB

doc/devices/photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-label.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 455 KiB

doc/devices/photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 710 KiB

doc/devices/photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.6 MiB

doc/devices/photos/SWTG024AS-V2.0/label.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 3.2 MiB

doc/devices/photos/SWTG024AS-V2.0/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 9.7 MiB

doc/devices/photos/SWTG024AS-V2.0/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 36 MiB

doc/devices/photos/ZX-SWTGW215AS/label.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.5 MiB

doc/devices/photos/ZX-SWTGW215AS/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.4 MiB

doc/devices/photos/ZX-SWTGW215AS/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.0 MiB

doc/devices/photos/ZX310S-4T2XH/label.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.9 MiB

doc/devices/photos/ZX310S-4T2XH/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.7 MiB

doc/devices/photos/ZX310S-4T2XH/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 3.3 MiB

doc/devices/photos/ZX310S-4T2XT/label.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.2 MiB

doc/devices/photos/ZX310S-4T2XT/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.5 MiB

doc/devices/photos/ZX310S-4T2XT/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 2.7 MiB

doc/gpio.md
+98
View File
@@ -0,0 +1,98 @@
# GPIO Pin, Function and MUX registers.
These functions should bevalid for `RTL8372`, `RTL8372N`, `RTL8373`, and `RTL8373N`.
`N`-version doesn't seems to have all the GPIO pins available on the outside of the package.
| GPIO | Function | TYPE | MUX REG, BIT | (RTL8372) PIN# | (RTL8372N) PIN# |
| ----- | ---- | ---- | ---- | ---- | ---- |
| GPIO0 | LED0 | I/OPU | IO_MUX_SEL_0, BIT 0 | G1 | 12 |
| GPIO1 | LED1 | I/OPU | IO_MUX_SEL_0, BIT 1 | G2 | 15 |
| GPIO2 | LED2 | I/OPU | IO_MUX_SEL_0, BIT 2 | G3 | 14 |
| GPIO3 | LED3 | I/OPU | IO_MUX_SEL_0, BIT 3 | H1 | 16 |
| GPIO4 | LED4 | I/OPU | IO_MUX_SEL_0, BIT 4 | H2 | 18 |
| GPIO5 | LED5 | I/OPU | IO_MUX_SEL_0, BIT 5 | H3 | 20 |
| GPIO6 | LED6 | I/OPU | IO_MUX_SEL_0, BIT 6 | J1 | 22 |
| GPIO7 | LED7 | I/OPU | IO_MUX_SEL_0, BIT 7 | J2 | NoPin? |
| GPIO8 | LED8 | I/OPU | IO_MUX_SEL_0, BIT 8 | J3 | 24 |
| GPIO9 | LED9 | I/OPD | IO_MUX_SEL_0, BIT 9 | L1 | 23 |
| GPIO10 | LED10 | I/OPU | IO_MUX_SEL_0, BIT 10 | L2 | 26 |
| GPIO11 | LED11 | I/OPU | IO_MUX_SEL_0, BIT 11 | L3 | NoPin? |
| GPIO12 | LED12 | I/OPD | IO_MUX_SEL_0, BIT 12 | M1 | 28 |
| GPIO13 | LED13 | I/OPU | IO_MUX_SEL_0, BIT 13 | M2 | NoPin? |
| GPIO14 | LED14 | I/OPU | IO_MUX_SEL_0, BIT 14 | M3 | NoPin? |
| GPIO15 | LED15 | I/OPU | IO_MUX_SEL_0, BIT 15 | N1 | 25 |
| GPIO16 | LED16 | I/OPU | IO_MUX_SEL_0, BIT 16 | N2 | NoPin? |
| GPIO17 | LED17 | I/OPU | IO_MUX_SEL_0, BIT 17 | N3 | NoPin? |
| GPIO18 | LED18 | I/OPD | IO_MUX_SEL_0, BIT 18 | P1 | 30 |
| GPIO19 | LED19 | I/OPU | IO_MUX_SEL_0, BIT 19 | P2 | NoPin? |
| GPIO20 | LED20 | I/OPU | IO_MUX_SEL_0, BIT 20 | P3 | NoPin? |
| GPIO21 | LED21 | I/OPU | IO_MUX_SEL_0, BIT 21 | R1 | 27 |
| GPIO22 | LED22 | I/OPU | IO_MUX_SEL_0, BIT 22 | R2 | NoPin? |
| GPIO23 | LED23 | I/OPU | IO_MUX_SEL_0, BIT 23 | R3 | NoPin? |
| GPIO24 | LED24 | I/OPU | IO_MUX_SEL_0, BIT 24 | N19 | 88 |
| GPIO25 | LED25 | I/OPU | IO_MUX_SEL_0, BIT 25 | P19 | 86 |
| GPIO26 | LED26 | I/OPU | IO_MUX_SEL_0, BIT 26 | P18 | 84 |
| GPIO27 | LED27 | I/OPU | IO_MUX_SEL_0, BIT 27 | R19 | 82 |
| GPIO28 | SYS_LED | I/OPU | IO_MUX_SEL_0, BIT 28 | F1 | 13 |
| GPIO29 | GLB_RLDP_LED_EN | | IO_MUX_SEL_0, BIT 29 | | NoPin? |
| GPIO30 | ACL_BIT3_EN | | IO_MUX_SEL_2, BIT 3 | F3 | 11 |
| GPIO31 | UART TX (OUTPUT) | | IO_MUX_SEL_1, BIT 0 | L20 | 90 |
| GPIO32 | UART TX (INPUT) | | IO_MUX_SEL_1, BIT 1 | L21 | |
| GPIO33 | GPIO_INT | | IO_MUX_SEL_1, BIT 2 | | |
| GPIO34 | MDC0 | | IO_MUX_SEL_1, BIT 3 | | |
| GPIO35 | MDIO0 | | IO_MUX_SEL_1, BIT 4 | | |
| GPIO36 | PWM_OUT | | IO_MUX_SEL_1, BIT 30 | B13 | |
| GPIO37 | --- | | | L18 | |
| GPIO38 | --- | | | K19 | |
| GPIO39 | MSDA4 | | IO_MUX_SEL_1, BIT 29 | K20 | 95 |
| GPIO40 | MDC1/SCL3 | | IO_MUX_SEL_1, BIT 5 & 6 | J29 | |
| GPIO41 | MDIO1/MSDA3 | | IO_MUX_SEL_1, BIT 5 & 6 | J19 | |
| GPIO42 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | D1 | |
| GPIO43 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | E1 | |
| GPIO44 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | D2 | |
| GPIO45 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | E2 | |
| GPIO46 | MSCK0 | | IO_MUX_SEL_1, BIT 7 & 8 | A2 | |
| GPIO47 | MSDA0 | | IO_MUX_SEL_1, BIT 9 & 10 | B2 | |
| GPIO48 | MSCK1 | | IO_MUX_SEL_1, BIT 11 & 12 | A1 | |
| GPIO49 | MSDA1 | | IO_MUX_SEL_1, BIT 13 & 14 | B1 | |
| GPIO50 | MSCL2/U1TXD | | IO_MUX_SEL_1, BIT 15 & 16 | C1 | |
| GPIO51 | MSDA2/U1RXD | | IO_MUX_SEL_1, BIT 17 & 18 | C2 | |
| GPIO52 | ACL_BIT0_EN | | IO_MUX_SEL_2, BIT 0 | | |
| GPIO53 | ACL_BIT1_EN | | IO_MUX_SEL_2, BIT 1 | | |
| GPIO54 | ACL_BIT2_EN | | IO_MUX_SEL_2, BIT 2 | E5 | |
| GPIO55 | PTP_CLK125M_IN | | IO_MUX_SEL_1, BIT 19 | | |
| GPIO56 | PTP_CLK_OUT | | IO_MUX_SEL_1, BIT 20 | | |
| GPIO57 | PTP_TOD_OUT | | IO_MUX_SEL_1, BIT 21 | | |
| GPIO58 | PTP_PPS_OUT | | IO_MUX_SEL_1, BIT 22 | | |
| GPIO59 | PTP_TOD_IN | | IO_MUX_SEL_1, BIT 23 | | |
| GPIO60 | PTP_PPS_IN | | IO_MUX_SEL_1, BIT 24 | | |
| GPIO61 | SYNCELOCK0 | | IO_MUX_SEL_1, BIT 27 | | |
| GPIO62 | SYNCELOCK1 | | IO_MUX_SEL_1, BIT 28 | | |
| GPIO63 | GPIO_MDIO0 | | IO_MUX_SEL_1, BIT 4 | | |
## I2C
| I2C | Function |Type | (RTL8372) PIN# | (RTL8372N) PIN# |
| ---- | ---- | ---- | ---- | ---- |
| GPIO47 | SDA0 | I/OPU | | B1 | 142 |
| GPIO49 | SDA1 | I/OPU | | B2 | 144 |
| GPIO51 | SDA2 | I/OPU | | C2 | ??? |
| GPIO41 | SDA3 | I/OPU | | J20 | 98 |
| GPIO39 | SDA4 | I/OPU | | K20 | 95 |
| GPIO46 | SCL0 | I/OPU | | A2 | 138 |
| GPIO48 | SCL1 | I/OPU | | A1 | 140 |
| GPIO50 | SCL2 | I/OPU | | C1 | ??? |
| GPIO40? | SCL3 | OPU | | J20 | |
# Other funcitons
| Function | Type | (RTL8372) PIN# | (RTL8372N) PIN# |
| ---- | ---- | ---- | ---- |
| nRESET | | A6 | 131 |
| PTP_SYNC | | B10 | 130 |
| INT | OPU | B6 | 132 |
doc/images/advanced_settings.png
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 64 KiB

doc/link_aggregation.md
+1 -1
View File
@@ -92,7 +92,7 @@ The following shows the network configuration
On _both_ switches create a LAG with ports 1 and 2 inside and the default hash algorithm which takes
source and destination ports into account, e.g. just use the default:
```
> lag 0 1 2
> lag 1 1 2
```
doc/mods.md
+4 -1
View File
@@ -37,10 +37,13 @@ This list is incomplete.
| Brand | Partnumber |
| ---------- |----------- |
| GigaDevice | GD25Q32E |
| Fundan | FM25Q16A |
| Puya | P25D40SH |
| Winbond | W25Q16JV |
| Winbond | W25Q32FV |
| Winbond | W25Q32JV |
| Winbond | W25Q16JL |
| Fundan | FM25Q16A |
| Winbond | W25Q16DV |
| Winbond | W25Q80DV |
*NOTE*: Part numbers are incomplete. Part numbers may contain additional information such as package, temperature specifications, and even the number of devices on a reel. So always check the datasheet so that you have the right orderable partnumber.
doc/support-multi-language.md
+135
View File
@@ -0,0 +1,135 @@
# Supporting Multiple Languages in the Web UI
The firmware uses a client-side i18n approach
all translations are stored in a single JavaScript dictionary embedded in the firmware.
No server-side changes are needed.
## Architecture
All translation logic lives in `html/i18n.js`. The file contains:
- A `LANG` object with one sub-object per language (`en`, `ja`, ...)
- Language auto-detection (browser language → `localStorage` override)
- `t(key)` — look up a translated string
- `setLang(lang)` — switch language and update the page
- `applyTranslation(el)` — apply translation to one DOM element
Translation keys are **flat strings** (no nesting). The English keys in `LANG.en` also serve as the fallback when a key is missing in another language.
## How to Add a New Language
### 1. Add a dictionary entry in `html/i18n.js`
Append a new sub-object to the `LANG` object. Every key from `LANG.en` must be present:
```js
var LANG = {
en: {
nav_overview: 'Overview',
nav_port_config: 'Port Configuration',
// ... all keys for English
},
ja: {
nav_overview: '概要',
nav_port_config: 'ポート設定',
// ... all keys for Japanese
},
LANGCODE: { // ← add your language here
nav_overview: '...',
nav_port_config: '...',
// ... translate every key
},
};
```
### 2. Add the language to the navigation sidebar
In `html/navigation.js`, add an `<option>` to the language selector:
```js
+ "<option value='en'>English</option><option value='ja'>日本語</option>"
```
Replace with:
```js
+ "<option value='en'>English</option><option value='ja'>日本語</option><option value='LANGCODE'>Native Name</option>"
```
### 3. Verify auto-detection
The language detection code in `i18n.js` reads `navigator.language` and normalises it to the first two characters:
```js
var browser = (navigator.language || navigator.userLanguage || 'en').substring(0, 2);
return LANG[browser] ? browser : 'en';
```
If the two-letter code matches a key in `LANG`, it will be auto-selected. No changes needed here.
## Two Translation Mechanisms
### (A) `data-i18n` attribute (declarative — for HTML)
Add `data-i18n="key_name"` to any HTML element. The English text goes in the element content as a fallback:
```html
<h1 data-i18n="port_heading">Port Configuration</h1>
<input type="button" data-i18n="port_apply" value="Apply">
<option data-i18n="port_auto">Auto</option>
<title data-i18n="port_title">Port Configuration</title>
```
On page load, `applyTranslation()` sets:
- `el.value` for `<input type="submit|button">`
- `el.textContent` for `<option>`, `<title>`
- `el.innerHTML` for everything else
### (B) `t('key')` call (imperative — for JavaScript strings)
When generating HTML or text in JavaScript, wrap translatable strings with `t()`:
```js
td.appendChild(document.createTextNode(t('common_port') + i));
td.innerHTML = t('port_auto');
iHTML += "<tr><td>" + t('port_vendor') + "</td></tr>";
```
### Special Case: Link Speed Display
The `linkS` array in `html/main.js` maps numeric link states to display strings. The first two entries (`speed_disabled`, `speed_down`) use `t()` for translation; the remaining entries are static literals (they are the same in all languages):
```js
const linkS = [
function(){return t('speed_disabled')},
function(){return t('speed_down')},
"10M", "100M", "1000M", "500M", "10G", "2.5G", "5G"
];
function linkText(idx) { var v = linkS[idx]; return typeof v === 'function' ? v() : v; }
```
Always use `linkText(idx)` (not `linkS[idx]`) to read these values.
## Size Considerations
- `html/i18n.js` is embedded in the firmware filesystem (~14 KB for two languages)
- Each new language adds roughly the same number of bytes as the English dictionary (~3–4 KB)
- The firmware binary is padded to 512 KiB, so a few extra KB do not change the flash footprint
- Values that are identical in all languages should be inlined as literals rather than added to the dictionary (e.g., `"10M"`, `"2.5G"`, `"MAC"`, `"VLAN"`, `"CPU"`)
## Build
No special flags are needed. The `html/` directory is embedded by `fileadder` during the build.
## Script Load Order
`i18n.js` must be loaded after `main.js` (which defines `t()`'s dependencies like `LANG`) but before any page-specific JS that calls `t()`:
```html
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<script src="/eee.js"></script> <!-- uses t() -->
```
The `navigation.js` script is loaded last (bottom of `<body>`).
doc/supported_devices.md
+29 -11
View File
@@ -1,17 +1,35 @@
# Supported Hardware
The following devices have been tested and are fully working:
- Horaco ZX_SG4T2
- keepLINK kp-9000-6hx-x2 (RTL8372: 4x 2.5GBit + 2x 10GBit SFP+)
- keepLINK KP-9000-6XHML-X2, same as above, but Managed
- keepLINK kp-9000-6hx-x (RTL8372 + RTL8221B 2.5GBit PHY: 5 x 2.5GBit + 1x 10GBit SFP+)
- keepLINK kp-9000-9xh-x-eu (1 x RTL8373 + RTL8224: 8x 2.5GBit + 1x 10GBit SFP+)
- Lianguo LG-SWTGW218AS (RTL8373 + RTL8224 PHY: 8x 2.5GBit + 1x 10GBit SFP+)
- No-Name ZX-SWTGW215AS, managed version of kp-9000-6hx-x, ordered on
AliExpress as keepLINK 5+1 port managed
- TrendNet TEG-S562 (RTL8372: 4x 2.5GBit + 2x 10GBit SFP+)
Other device based on RTL8272/3 that may work are described here: [Up-N-Atoms 2.5 GBit RTL Switch hacking guide]
(https://github.com/up-n-atom/SWTG118AS)
| Brand | Type | Managed | PCB | Flash | Ports |
|----------|-----------------|---------|---------------------------------------------------------------------------|-------|-------|
| Ampcom | WAM902-SWTG018AS| No | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md) | | 8 + 1 |
| Davuaz | Da-K6501W | No | [PCB-K0501W-V2.0](devices/K0501W_V2_0.md) | | 5 + 1 |
| FOXNEO | FNS-1200P | No | [PCB-K0402W-U13-V2.0](devices/FNS-1200P.md) | 2M | 4 + 2 |
| Hisource | Hi-K0402WS | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
| Hisource | Hi-K0801WS | No | [PCB-KO801W-V2.0](devices/HI-K0801WS.md) | | 8 + 1 |
| hongyavision | LG-SG5T1 | No | [PCB-SWTG024AS-V2.0_16895](devices/SWTG024AS-V2.0.md) | 0.5M | 5 + 1 |
| Horaco | HC-SWTGW215AS | Yes | [SWTG024AS-A-V2.0.1_19650 5C 1SFP](devices/SWTG024AS-A-V2.0.1_5C_1SFP.md) | ? | 5 + 1 |
| Horaco | HC-SWTGW218AS | Yes | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md) | | 8 + 1 |
| Horaco | ZX310S-4T2XH | Yes | [PCB-SL310S-4T1T1X-V1.0.1-24107](devices/ZX310S-4T2XH.md) | 2M | 5 + 1 |
| Horaco | ZX310S-4T2XT | Yes | [PCB-SL310S-4T2XT-V1.0.0-22273](devices/ZX310S-4T2XT.md) | 2M | 6 |
| Horaco | ZX-SG4T2 | No | [SWTG024AS-A-V2.0.1_19650_4C_2SFP](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 0.5M | 4 + 2 |
| Horaco | ZX-SWTG124AS | Yes | [SWTG024AS-v2.0](devices/SWTG024AS.md) | | 4 + 2 |
| Keeplink | KP-9000-6XH-X2 | No | [2M-PCB43-V2.1](devices/KP-9000-6XH-X2.md) | | 4 + 2 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V2.2](devices/2M-PCB23-V2_2.md) | 2M | 8 + 1 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V3.1](devices/2M-PCB23-V3_1.md) | 2M | 8 + 1 |
| LIANGUO | SWTG024AS | No | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md) | 0.5M | 4 + 2 |
| Lianguo | ZX-SWTGW215AS | Yes | [PCB-SWTG115AS-V2.0](devices/SWTGW215AS.md) | 2M | 5 + 1 |
| Mokerlink| ZX-SWTGW218AS | Yes | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md) | 2M | 8 + 1 |
| Ruiying | RY-4GT-2SX | No | [FG-4GT-2SX_V2.0](devices/FG-4GT-2SX_V2.0.md) | 4M | 4 + 2 |
| Sodola | SL-SWTG124AS-D | Yes | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md) | 2M | 4 + 2 |
| Steamemo | IG204-V1 | No | [PB-2131](devices/STEAMEMO_IG204_V1.md) | | 4 + 2 |
| TrendNet | TEG-S562 | No | [TEG-S563/EU H/W: V1.0R](devices/TEG-S562.md) | 2M | 4 + 2 |
| Xikestore| SKS3200M-4GPY2XF| Yes | [SWTG024AS-v1.0](devices/SWTG024AS.md) | | 4 + 2 |
| XikeStor | SKS3200-8E1X | Yes | [SWTG118AS-V2.1-17462](devices/SWTGW218AS.md) | 2M | 8 + 1 |
| Ztyuav | Z-QWYT0402 | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
Other device based on RTL8272/3 that may work are described here: [Up-N-Atoms 2.5 GBit RTL Switch hacking guide](https://github.com/up-n-atom/SWTG118AS)
Many of the RTL8272/3 devices come in versions with PoE support. The RTLPlayground usually also
works on these, however, no support for configuring PoE is provided, simply because these
doc/vlan.md
+34 -7
View File
@@ -33,15 +33,23 @@ An entry is deleted by adding an invalid entry (00 instead of 0x02 in
RTL837x_TBL_DATA_IN_A).
A port is assigned a PVID by setting the PVID-bits of the corresponding
register of the port. 2 ports share a register. One port uses the higher
16 bits, the other (even ports) use the lower. The base register is
register of the port. 2 ports share a register. An odd port uses bits [23:12],
an even port uses bits [11:0]. The base register is
RTL837x_PVID_BASE_REG (0x4e1c) and the registers go to 0x4e2c so that also
the CPU-Port may have a PVID.
Register RTL837x_REG_INGRESS (0x4e10) allows to define the iingress rules of
Register RTL837x_REG_INGRESS (0x4e10) allows to define the ingress rules of
a port. 2 bits define a rule and bits 0-19 are being used. A value of 00
defines no filtering, 01 (0x01) allows only tagged packets, while 10 (0x02)
allows only untagged packets to enter a port. The default PVID is 1.
allows only untagged packets to enter a port.
Register RTL837X_VLAN_PORT_IGR_FLTR (0x4e18) enables or disables ingres VLAN
filtering, each bit corresponds to given port (port0 -> bit0, port9 -> bit9).
When enabled, incomming package's vlan tag is checked against VLAN membership
on given port. When package contains VLAN not in member list, package is dropped.
The default PVID on all port is 1, ingress VLAN filtering is enabled and all types of
frames are accepted on input on all ports.
By default, the ports transmit Ethernet frames with Realtek's proprietary
tag format. By setting bit 6 (0x40) of the respective port configuration
@@ -51,7 +59,9 @@ registers 0x1238, 0x1338, ...
The code currently provides the following functions:
```
void port_pvid_set(uint8_t port, __xdata uint16_t pvid) __banked;
void vlan_create(uint16_t vlan, uint16_t members, uint16_t tagged) __banked;
uint16_t port_pvid_get(uint8_t port) __banked;
void vlan_create(void) __banked; // reads from global vlan_settings
int8_t vlan_get(register uint16_t vlan) __banked; // returns data in sfr_data
void vlan_delete(uint16_t vlan) __banked;
```
@@ -66,9 +76,26 @@ vlan <VLAN-ID> p[t/u]...
vlan <VLAN-ID> d
deletes the VLAN
vlan show
Dumps the current ingress vlan settings.
vlan <VLAN-ID> mgmt
Restricts network access to the switch (web UI, syslog) to the given
VLAN. Use `vlan 0 mgmt` to disable the filter. Default is `vlan 1 mgmt`.
Warning: setting this to an unreachable VLAN locks out the web UI;
recovery requires serial console.
pvid <port> <VLAN-ID>
assigns PVID to a port. ports are numbered as on the casing
ingress <port> [tagged|untagged|all]
Allows ingress only for the named packages at the given port
ingress [p]<t|u|a>...
Allows ingress packages on port `p` only when `t`agged, `u`ntagged or `a`ny.
Multiple ports can be given at once as in vlan. When `p` is missing, all ports
are assigned the same mode. CPU port can not be changed.
Use `vlan show` to see current configuration.
Example:
`ingress 1t 2a` -> Set port 1 as tagged input only, set port 2 accepting any frames.
`ingress a` -> Set all ports to accept both tagged and untagged frames (default behaviour).
```
html/bandwidth.html
+5 -4
View File
@@ -1,17 +1,18 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title>Ingress and Egress Bandwidth</title>
<title data-i18n="bw_title">Ingress and Egress Bandwidth</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1>Ingress and Egress Bandwidth</h1>
<h1 data-i18n="bw_heading">Ingress and Egress Bandwidth</h1>
<table id="bwtable">
<tr> <th> </th> <th colspan="3"> Ingress </th> <th colspan="2">Egress</th> <th></th></tr>
<tr> <th>Port</th> <th>Limit</th> <th>Bandwidth [kBit/s]</th> <th>Flow Control</th> <th>Limit</th> <th>Bandwidth [kBit/s]</th> <th>Apply</th></tr>
<tr> <th> </th> <th colspan="3" data-i18n="bw_ingress"> Ingress </th> <th colspan="2" data-i18n="bw_egress">Egress</th> <th></th></tr>
<tr> <th data-i18n="bw_col_port">Port</th> <th data-i18n="bw_col_limit">Limit</th> <th data-i18n="bw_col_bandwidth">Bandwidth [kBit/s]</th> <th data-i18n="bw_col_flow">Flow Control</th> <th data-i18n="bw_col_limit">Limit</th> <th data-i18n="bw_col_bandwidth">Bandwidth [kBit/s]</th> <th data-i18n="bw_col_apply">Apply</th></tr>
</table>
<script src="/bandwidth.js"></script>
</div>
html/bandwidth.js
+20 -18
View File
@@ -3,22 +3,21 @@ function createBW() {
var tbl = document.getElementById('bwtable');
const limit = '<input type="checkbox" id="limit_port" onchange="exec();">'
if (tbl.rows.length <= 2 && numPorts) {
clearInterval(createBWInterval);
console.log("CREATING TABLE ", tbl.rows.length);
for (let i = 2; i < 2 + numPorts; i++) {
const tr = tbl.insertRow();
let td = tr.insertCell(); td.appendChild(document.createTextNode(`Port ${i-1}`));
let td = tr.insertCell(); td.appendChild(document.createTextNode(t('common_port') + (i-1)));
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "ilimit_port_" + i).replace("exec()", "iClicked(" + i + ")");
td = tr.insertCell();
td.innerHTML = 'UNLIMITED';
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "fc_port_" + i).replace("exec()", "document.getElementById('bwapply_" + i + "').disabled=false;");
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "elimit_port_" + i).replace("exec()", "eClicked(" + i + ")");
td = tr.insertCell();
td.innerHTML = 'UNLIMITED';
var button = '<button type="button" id="bwapply_' + i + '" style="margin: 0 0 0 24px" onclick="applyBandwidth(' + i + ');">Apply</button>';
td.innerHTML = t('bw_unlimited');
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "fc_port_" + i).replace("exec()", "document.getElementById('bwapply_" + i + "').disabled=false;");
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "elimit_port_" + i).replace("exec()", "eClicked(" + i + ")");
td = tr.insertCell();
td.innerHTML = t('bw_unlimited');
var button = '<button type="button" id="bwapply_' + i + '" style="margin: 0 0 0 24px" onclick="applyBandwidth(' + i + ');">' + t('bw_col_apply') + '</button>';
td = tr.insertCell();
td.innerHTML = button;
document.getElementById("bwapply_" + i).disabled = true;
@@ -32,7 +31,7 @@ function iClicked(i)
var tbl = document.getElementById('bwtable');
var tr = tbl.rows[i];
if (!document.getElementById("ilimit_port_" + i).checked) {
tr.cells[2].innerHTML = "UNLIMITED";
tr.cells[2].innerHTML = t('bw_unlimited');
document.getElementById("fc_port_" + i).disabled = true;
document.getElementById("fc_port_" + i).checked = true;
} else {
@@ -48,7 +47,7 @@ function eClicked(i)
var tbl = document.getElementById('bwtable');
var tr = tbl.rows[i];
if (!document.getElementById("elimit_port_" + i).checked) {
tr.cells[5].innerHTML = "UNLIMITED";
tr.cells[5].innerHTML = t('bw_unlimited');
} else {
tr.cells[5].innerHTML = '<input id="ebw_' + i + iLayout + i + ')" value="0"/>';
}
@@ -94,6 +93,7 @@ async function applyBandwidth(i) {
function getBW() {
var xhttp = new XMLHttpRequest();
xhttp.onreadystatechange = function() {
console.log("IN getBW ");
if (this.readyState == 4 && this.status == 200) {
const s = JSON.parse(xhttp.responseText);
console.log("BW: ", JSON.stringify(s));
@@ -110,12 +110,12 @@ function getBW() {
document.getElementById("ilimit_port_" + (n+1)).checked = p.iLimited;
document.getElementById("elimit_port_" + (n+1)).checked = p.eLimited;
if (!p.iLimited) {
tr.cells[2].innerHTML = "UNLIMITED";
tr.cells[2].innerHTML = t('bw_unlimited');
} else {
tr.cells[2].innerHTML = '<input id="ibw_' + (n+1) + iLayout + (n+1) + ')" value="' + iBW +'"/>';
}
if (!p.eLimited) {
tr.cells[5].innerHTML = "UNLIMITED";
tr.cells[5].innerHTML = t('bw_unlimited');
} else {
tr.cells[5].innerHTML = '<input id="ebw_' + (n+1) + iLayout + (n+1) + ')" value="' + eBW +'"/>';
}
@@ -126,11 +126,13 @@ function getBW() {
}
};
xhttp.open("GET", "/bandwidth.json", true);
xhttp.timeout = 1500; xhttp.send();
xhttp.timeout = 1500; sendXHTTP(xhttp);
}
window.addEventListener("load", function() {
getBW();
const iCount = setInterval(getBW, 2000);
update( () => {
createBW();
getBW();
const interval = setInterval(update, 2000);
});
});
const createBWInterval = setInterval(createBW, 1010);
html/config.js
+77 -22
View File
@@ -1,35 +1,90 @@
var configInterval = Number();
var configuration = [];
const conf_cmds = [
/ip\s+(\d{1,3}\.){3}\d{1,3}/, /gw\s+(\d{1,3}\.){3}\d{1,3}/, /netmask\s+(\d{1,3}\.){3}\d{1,3}/,
/eee(\s+\d)?\s+(on|off)/, /mirror(\s+(\d|10))(\s+(\d|10)(t|r)?)+/, /vlan\s+(\d{1,4})(\s+(\d|10)(t|u)?)+/
/^ip\s+(\d{1,3}\.){3}\d{1,3}$/,
/^ip\s+dhcp$/,
/^gw\s+(\d{1,3}\.){3}\d{1,3}$/,
/^netmask\s+(\d{1,3}\.){3}\d{1,3}$/,
/^syslog\s+(on|off)$/,
/^syslog\s+ip\s+(\d{1,3}\.){3}\d{1,3}$/,
/^passwd\s+\S+$/,
/^vlan\s+\d{1,4}\s+d$/,
/^vlan\s+\d{1,4}\s+mgmt$/,
/^vlan\s+\d{1,4}(\s+[a-zA-Z]\w*)?(\s+\d{1,2}[tu]?)+$/,
/^pvid\s+\d{1,2}\s+\d{1,4}$/,
/^ingress(\s+\d{1,2}[tua])+$/,
/^ingress\s+[tua]$/,
/^port\s+\d{1,2}\s+(10m|100m|1g|2g5|5g|10g|auto|on|off)(\s+(half|full))?$/,
/^port\s+\d{1,2}\s+name\s+\S+$/,
/^eee(\s+\d{1,2})?\s+(on|off)$/,
/^mirror(\s+\d{1,2})(\s+\d{1,2}[tr]?)+$/,
/^lag\s+\d(\s+\d{1,2})+$/,
/^laghash\s+\d(\s+\w+)+$/,
/^isolate\s+\d{1,2}(\s+(off|\d{1,2}))+$/,
/^stp\s+(on|off)$/,
/^igmp\s+(on|off)$/,
/^mtu\s+\d{1,2}\s+\d+$/,
/^bw\s+(in|out)\s+\d{1,2}\s+\S+$/,
/^hostname\s+.{1,23}$/,
];
const conf_overwrite = [
/ip/, /gw/, /netmask/, /eee\s+\w+/, /eee(\s+\w)/, /mirror/, /vlan\s+(\d{1,4})/
/^ip\b/,
/^gw\b/,
/^netmask\b/,
/^syslog\s+ip\b/,
/^syslog\b/,
/^passwd\b/,
/^vlan\s+\d{1,4}\s+mgmt$/,
/^vlan\s+\d{1,4}(?!\s+mgmt\b)/,
/^pvid\s+\d{1,2}\b/,
/^ingress\b/,
/^port\s+\d{1,2}(?!\s+name\b)/,
/^port\s+\d{1,2}\s+name\b/,
/^eee\s+\d{1,2}\b/,
/^eee\b/,
/^mirror\b/,
/^lag\s+\d+\b/,
/^laghash\b/,
/^isolate\s+\d{1,2}\b/,
/^stp\b/,
/^igmp\b/,
/^mtu\s+\d{1,2}\b/,
/^bw\s+(in|out)\s+\d{1,2}\b/,
/^hostname\b/,
];
function parseConf(s){
var a = s.split(/\r\n|\n/);
for (var l = 0; l < a.length; l++) {
if (!a[l].length || a[l] == "\n" || a[l] == "\r\n")
continue;
console.log(l + ' --> ' + a[l]);
var ignore = true;
for (const x of conf_cmds)
if (x.test(a[l])) ignore = false;
if (ignore) continue;
for (const x of conf_overwrite) {
if (x.test(a[l])) {
console.log("Match ", x, " to ", a[l]);
m = a[l].match(x);
console.log("Starts with ", m[0]);
configuration = configuration.filter(item => !(item.startsWith(m[0])));
}
}
configuration.push(a[l]);
for (var l = 0; l < a.length; l++) {
var line = a[l].trim().replace(/\s+/g, ' ');
if (!line.length) continue;
const deleteMatch = line.match(/^vlan\s+(\d{1,4})\s+d$/);
if (deleteMatch) {
const prefix = "vlan " + deleteMatch[1] + " ";
configuration = configuration.filter(c => !c.startsWith(prefix));
continue;
}
console.log("Configuration now:");
for (const x of configuration) { console.log(x); }
console.log(l + ' --> ' + line);
var ignore = true;
for (const x of conf_cmds)
if (x.test(line)) { ignore = false; break; }
if (ignore) continue;
for (const x of conf_overwrite) {
if (x.test(line)) {
let m = line.match(x);
let matchStr = m[0];
configuration = configuration.filter(item =>
!(item === matchStr || (item.startsWith(matchStr + " ") && !item.endsWith(" mgmt") && !item.startsWith(matchStr + " name "))));
break;
}
}
// Only one management VLAN can be active, so drop any previous mgmt entry
if (/^vlan\s+\d{1,4}\s+mgmt$/.test(line))
configuration = configuration.filter(item => !/^vlan\s+\d{1,4}\s+mgmt$/.test(item));
configuration.push(line);
}
console.log("Configuration now:");
for (const x of configuration) { console.log(x); }
}
async function fetchConfig() {
html/eee.html
+7 -6
View File
@@ -1,21 +1,22 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title>EEE Configuration</title>
<title data-i18n="eee_title">EEE Configuration</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1>EEE Status</h1>
<h1 data-i18n="eee_heading">EEE Status</h1>
<table id="eeetable">
<tr> <th> </th> <th colspan="3"> Advertising </th> <th colspan="3">Link-Partner advertises</th> <th></th></tr>
<tr> <th>Port</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th>Active?</th></tr>
<tr> <th> </th> <th colspan="3" data-i18n="eee_advertising"> Advertising </th> <th colspan="3" data-i18n="eee_partner">Link-Partner advertises</th> <th></th></tr>
<tr> <th data-i18n="eee_port">Port</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th data-i18n="eee_active">Active?</th></tr>
</table>
<div>
<input style="width:20%;" class="action" id="eee_enable" onclick="eeeSub(0, 1);" type="button" value="Enable EEE">
<input style="width:20%;" class="action" id="eee_enable" onclick="eeeSub(0, 0);" type="button" value="Disable EEE">
<input style="width:20%;" class="action" id="eee_enable" onclick="eeeSub(0, 1);" type="button" data-i18n="eee_enable" value="Enable EEE">
<input style="width:20%;" class="action" id="eee_disable" onclick="eeeSub(0, 0);" type="button" data-i18n="eee_disable" value="Disable EEE">
</div>
<script src="/eee.js"></script>
<script src="/eee_sub.js"></script>
html/eee.js
+10 -8
View File
@@ -1,12 +1,11 @@
function createEEE() {
var tbl = document.getElementById('eeetable');
if (tbl.rows.length <= 2 && numPorts) {
clearInterval(createEEEInterval);
console.log("CREATING TABLE ", tbl.rows.length);
for (let i = 2; i < 2 + numPorts; i++) {
console.log("Table row: " + i + "pState: " + pState[i-2]);
const tr = tbl.insertRow();
let td = tr.insertCell(); td.appendChild(document.createTextNode(`Port ${i-1}`));
let td = tr.insertCell(); td.appendChild(document.createTextNode(t('common_port') + (i-1)));
for (let j = 0; j < 7; j++) {
td = tr.insertCell(); td.appendChild(document.createTextNode(" "));
}
@@ -29,8 +28,8 @@ function getEEE() {
let tr = tbl.rows[n+1];
if (!p.isSFP) {
let eee = parseInt(p.eee,2); let lp = parseInt(p.eee_lp,2);
tr.cells[1].innerHTML = `${eee&4?"ON":"OFF"}`; tr.cells[2].innerHTML = `${eee&2?"ON":"OFF"}`; tr.cells[3].innerHTML = `${eee&1?"ON":"OFF"}`;
tr.cells[4].innerHTML = `${lp&4?"ON":"OFF"}`; tr.cells[5].innerHTML = `${lp&2?"ON":"OFF"}`; tr.cells[6].innerHTML = `${lp&1?"ON":"OFF"}`;
tr.cells[1].innerHTML = `${eee&4?t('eee_on'):t('eee_off')}`; tr.cells[2].innerHTML = `${eee&2?t('eee_on'):t('eee_off')}`; tr.cells[3].innerHTML = `${eee&1?t('eee_on'):t('eee_off')}`;
tr.cells[4].innerHTML = `${lp&4?t('eee_on'):t('eee_off')}`; tr.cells[5].innerHTML = `${lp&2?t('eee_on'):t('eee_off')}`; tr.cells[6].innerHTML = `${lp&1?t('eee_on'):t('eee_off')}`;
tr.cells[7].innerHTML = `${p.active}`;
tr.classList.toggle('disabled', pState[i-2] < 0); tr.classList.toggle('isNOK', !p.active); tr.classList.toggle('isOK', p.active);
}
@@ -40,11 +39,14 @@ function getEEE() {
}
};
xhttp.open("GET", "/eee.json", true);
xhttp.timeout = 1500; xhttp.send();
xhttp.timeout = 1500; sendXHTTP(xhttp);
}
window.addEventListener("load", function() {
getEEE();
const iCount = setInterval(getEEE, 2000);
update( () => {
createEEE();
getEEE();
const interval = setInterval(update, 2000);
const iCount = setInterval(getEEE, 2000);
});
});
const createEEEInterval = setInterval(createEEE, 1000);
html/i18n.js
+603
View File
@@ -0,0 +1,603 @@
var LANG = {
en: {
nav_overview: 'Overview',
nav_port_config: 'Port Configuration',
nav_port_stat: 'Port Statistics',
nav_l2: 'L2 Configuration',
nav_mirror: 'Mirroring',
nav_lag: 'Link Aggregation',
nav_eee: 'EEE',
nav_bandwidth: 'Bandwidth Limits',
nav_system: 'System Settings',
nav_fw_update: 'Firmware Update',
port_name: 'Name',
port_status: 'Status',
port_not_enabled: 'Not enabled.',
port_link_speed: 'Link speed',
port_vendor: 'Vendor',
port_model: 'Model',
port_serial: 'Serial',
port_temp: 'Temp',
port_vcc: 'Vcc',
port_tx_fault: 'TX-Fault',
port_tx_disabled: 'TX-Disabled',
port_tx_bias: 'TX-Bias',
port_tx_power: 'TX-Power',
port_rx_power: 'RX-Power',
port_rx_los: 'RX-LOS',
speed_disabled: 'Disabled',
speed_down: 'Down',
port_title: 'FreeSwitchOS Port Configuration',
port_heading: 'Port Configuration',
port_col_port: 'Port',
port_col_name: 'Name',
port_col_speed: 'Current Link Speed',
port_col_set_speed: 'Set Speed',
port_col_disabled: 'Disabled',
port_col_apply: 'Apply',
port_mtu_heading: 'Configure Maximum Frame Size (MTU) forwarded at Port',
port_auto: 'Auto',
port_2500m: '2500MBit/Full',
port_1000m: '1000MBit/Full',
port_100m_f: '100MBit/Full',
port_100m_h: '100MBit/Half',
port_10m_f: '10MBit/Full',
port_10m_h: '10MBit/Half',
port_apply: 'Apply',
stat_title: 'FreeSwitchOS Port Statistics',
stat_heading: 'Port Statistics',
stat_detailed: 'Detailed Port Statistics',
stat_close: 'Close',
stat_col_port: 'Port',
stat_col_name: 'Name',
stat_col_link: 'link',
stat_col_tx_good: 'TX Good',
stat_col_tx_bad: 'TX Bad',
stat_col_rx_good: 'RX Good',
stat_col_rx_bad: 'RX Bad',
stat_col_all: 'All Counters',
stat_counter: 'Counter',
stat_value: 'Value',
stat_show: 'Show',
vlan_title: 'FreeSwitchOS VLAN Configuration',
vlan_heading: 'VLAN Configuration',
vlan_select: 'VLAN Select:',
vlan_choose: '— VLAN Choose —',
vlan_id: 'VLAN ID:',
vlan_get_config: 'Get Configuration',
vlan_name: 'VLAN Name:',
vlan_tagged: 'Tagged Ports',
vlan_untagged: 'Untagged Ports',
vlan_select_all: 'Select all',
vlan_pvid: 'Use as default VLAN for incoming traffic (PVID)',
vlan_update: 'Update / Create',
vlan_configured: 'Configured VLANs',
vlan_col_name: 'Name',
vlan_col_member: 'Member Ports',
vlan_col_tagged: 'Tagged Ports',
vlan_col_untagged: 'Untagged Ports',
vlan_col_pvid: 'PVID Ports',
vlan_col_delete: 'Delete',
vlan_set_id_first: 'Set VLAN ID first',
vlan_delete_confirm: 'Delete VLAN ',
lag_title: 'Link Aggregation Configuration',
lag_heading: 'Link Aggregation Groups Configuration',
lag_update: 'Update / Create',
mirror_title: 'Mirror Configuration',
mirror_heading: 'Mirror Configuration',
mirror_enabled: 'Enabled:',
mirror_port: 'Mirroring Port:',
mirror_tx: 'Mirrored Ports (TX)',
mirror_rx: 'Mirrored Ports (RX)',
mirror_update: 'Update / Create',
mirror_disable: 'Disable Mirroring',
mirror_set_port_first: 'Set Mirroring Port first',
mirror_select_ports: 'Select Mirrored Ports',
eee_title: 'EEE Configuration',
eee_heading: 'EEE Status',
eee_advertising: 'Advertising',
eee_partner: 'Link-Partner advertises',
eee_port: 'Port',
eee_active: 'Active?',
eee_enable: 'Enable EEE',
eee_disable: 'Disable EEE',
eee_on: 'ON',
eee_off: 'OFF',
l2_title: 'FreeSwitchOS L2 Configuration',
l2_heading: 'L2 Configuration',
l2_col_port: 'Port',
l2_col_type: 'Type',
l2_col_remove: 'Remove Entry',
l2_shown: 'Shown:',
l2_delete: 'Delete',
l2_static: 'static',
l2_learned: 'learned',
bw_title: 'Ingress and Egress Bandwidth',
bw_heading: 'Ingress and Egress Bandwidth',
bw_ingress: 'Ingress',
bw_egress: 'Egress',
bw_col_port: 'Port',
bw_col_limit: 'Limit',
bw_col_bandwidth: 'Bandwidth [kBit/s]',
bw_col_flow: 'Flow Control',
bw_col_apply: 'Apply',
bw_unlimited: 'UNLIMITED',
sys_title: 'System Settings',
sys_tab_system: 'System',
sys_tab_advanced: 'Advanced',
sys_tab_console: 'Console',
sys_heading: 'System Settings',
sys_ip: 'IP address:',
sys_model: 'Model:',
sys_hostname: 'Hostname:',
sys_apply: 'Apply',
sys_netmask: 'Netmask:',
sys_gateway: 'Gateway:',
sys_language: 'Language:',
sys_mgmt_vlan: 'Management VLAN:',
sys_mgmt_untagged: 'untagged',
sys_mgmt_confirm: 'Move switch management to VLAN ',
sys_mgmt_warn: 'The switch will start tagging its own traffic with that VLAN. If the port you are connected through does not carry it, this page becomes unreachable and the setting can only be undone over the console. Continue?',
sys_ip_note: 'When updating the above settings, remember to point your browser to the new IP afterwards:',
sys_update: 'Update Settings',
sys_save_label: 'Save all current settings to Flash:',
sys_save: 'Save Settings to Flash',
sys_advanced: 'Advanced Settings',
sys_startup_config: 'Startup configuration:',
sys_startup_warn: 'Be careful when saving the directly edited startup configuration, you can lock yourself out:',
sys_clear_config: 'Clear Startup Config',
sys_save_startup: 'Save Startup Settings to Flash',
sys_reset: 'Reset Switch',
sys_console: 'Console Command',
sys_enter_cmd: 'Enter command:',
sys_send_cmd: 'Send Command',
sys_console_warn: 'Be careful when entering console commands, you can lock yourself out!',
sys_invalid_ip: 'Invalid ip:',
sys_reset_confirm: 'Are you sure you want to reset the switch?',
sys_resetting: 'Switch is resetting. Please wait and refresh the page.',
login_title: 'RTL Switch Login',
login_heading: 'RTL Switch Login',
login_wrong: 'Wrong password!',
login_password: 'Password',
login_login: 'Login',
index_title: 'FreeSwitchOS Main Page',
index_heading: 'Switch Configuration',
index_settings: 'Settings',
update_title: 'Firmware update',
update_heading: 'Firmware Update',
update_instruction: 'Choose a firmware update file to upload:',
update_upload: 'Upload File',
common_port: 'Port ',
common_pkts: ' pkts',
},
ja: {
nav_overview: '概要',
nav_port_config: 'ポート設定',
nav_port_stat: 'ポート統計',
nav_l2: 'L2 設定',
nav_mirror: 'ミラーリング',
nav_lag: 'リンクアグリゲーション',
nav_eee: 'EEE',
nav_bandwidth: '帯域制限',
nav_system: 'システム設定',
nav_fw_update: 'ファームウェア更新',
port_name: '名前',
port_status: '状態',
port_not_enabled: '無効',
port_link_speed: 'リンク速度',
port_vendor: 'ベンダー',
port_model: 'モデル',
port_serial: 'シリアル',
port_temp: '温度',
port_vcc: '電圧',
port_tx_fault: 'TX 障害',
port_tx_disabled: 'TX 無効',
port_tx_bias: 'TX バイアス',
port_tx_power: 'TX 電力',
port_rx_power: 'RX 電力',
port_rx_los: 'RX 信号ロス',
speed_disabled: '無効',
speed_down: 'リンクダウン',
port_title: 'FreeSwitchOS ポート設定',
port_heading: 'ポート設定',
port_col_port: 'ポート',
port_col_name: '名前',
port_col_speed: '現在のリンク速度',
port_col_set_speed: '速度設定',
port_col_disabled: '無効',
port_col_apply: '適用',
port_mtu_heading: 'ポートの最大フレームサイズ (MTU) 設定',
port_auto: '自動',
port_2500m: '2500Mbps/全二重',
port_1000m: '1000Mbps/全二重',
port_100m_f: '100Mbps/全二重',
port_100m_h: '100Mbps/半二重',
port_10m_f: '10Mbps/全二重',
port_10m_h: '10Mbps/半二重',
port_apply: '適用',
stat_title: 'FreeSwitchOS ポート統計',
stat_heading: 'ポート統計',
stat_detailed: '詳細ポート統計',
stat_close: '閉じる',
stat_col_port: 'ポート',
stat_col_name: '名前',
stat_col_link: 'リンク',
stat_col_tx_good: 'TX 正常',
stat_col_tx_bad: 'TX 異常',
stat_col_rx_good: 'RX 正常',
stat_col_rx_bad: 'RX 異常',
stat_col_all: '全カウンタ',
stat_counter: 'カウンタ',
stat_value: '値',
stat_show: '表示',
vlan_title: 'FreeSwitchOS VLAN 設定',
vlan_heading: 'VLAN 設定',
vlan_select: 'VLAN 選択:',
vlan_choose: '— VLAN 選択 —',
vlan_id: 'VLAN ID:',
vlan_get_config: '設定取得',
vlan_name: 'VLAN 名:',
vlan_tagged: 'タグ付きポート',
vlan_untagged: 'タグ無しポート',
vlan_select_all: 'すべて選択',
vlan_pvid: '受信トラフィックのデフォルト VLAN (PVID)',
vlan_update: '更新 / 作成',
vlan_configured: '設定済み VLAN',
vlan_col_name: '名前',
vlan_col_member: 'メンバーポート',
vlan_col_tagged: 'タグ付きポート',
vlan_col_untagged: 'タグ無しポート',
vlan_col_pvid: 'PVID ポート',
vlan_col_delete: '削除',
vlan_set_id_first: 'VLAN ID を先に設定してください',
vlan_delete_confirm: 'VLAN 削除 ',
lag_title: 'リンクアグリゲーション設定',
lag_heading: 'リンクアグリゲーショングループ設定',
lag_update: '更新 / 作成',
mirror_title: 'ミラーリング設定',
mirror_heading: 'ミラーリング設定',
mirror_enabled: '有効:',
mirror_port: 'ミラーポート:',
mirror_tx: 'ミラー元ポート (TX)',
mirror_rx: 'ミラー元ポート (RX)',
mirror_update: '更新 / 作成',
mirror_disable: 'ミラーリング無効化',
mirror_set_port_first: 'ミラーポートを先に設定してください',
mirror_select_ports: 'ミラー元ポートを選択してください',
eee_title: 'EEE 設定',
eee_heading: 'EEE 状態',
eee_advertising: 'EEE アドバタイジング',
eee_partner: 'リンクパートナー広告',
eee_port: 'ポート',
eee_active: '有効?',
eee_enable: 'EEE 有効化',
eee_disable: 'EEE 無効化',
eee_on: 'オン',
eee_off: 'オフ',
l2_title: 'FreeSwitchOS L2 設定',
l2_heading: 'L2 設定',
l2_col_port: 'ポート',
l2_col_type: 'タイプ',
l2_col_remove: 'エントリ削除',
l2_shown: 'Shown:',
l2_delete: '削除',
l2_static: '静的',
l2_learned: '学習',
bw_title: '入力/出力帯域制限',
bw_heading: '入力/出力帯域制限',
bw_ingress: '入力',
bw_egress: '出力',
bw_col_port: 'ポート',
bw_col_limit: '制限',
bw_col_bandwidth: '帯域 [kbps]',
bw_col_flow: 'フロー制御',
bw_col_apply: '適用',
bw_unlimited: '制限無し',
sys_title: 'システム設定',
sys_tab_system: 'システム',
sys_tab_advanced: '詳細設定',
sys_tab_console: 'コンソール',
sys_heading: 'システム設定',
sys_ip: 'IP アドレス:',
sys_model: 'モデル:',
sys_hostname: 'ホスト名:',
sys_apply: '適用',
sys_netmask: 'ネットマスク:',
sys_gateway: 'ゲートウェイ:',
sys_language: '言語:',
sys_mgmt_vlan: 'Management VLAN:',
sys_mgmt_untagged: 'untagged',
sys_mgmt_confirm: 'Move switch management to VLAN ',
sys_mgmt_warn: 'The switch will start tagging its own traffic with that VLAN. If the port you are connected through does not carry it, this page becomes unreachable and the setting can only be undone over the console. Continue?',
sys_ip_note: '上記設定を変更した場合は、ブラウザで新しい IP にアクセスしてください:',
sys_update: '設定更新',
sys_save_label: '現在の設定をフラッシュに保存:',
sys_save: '設定をフラッシュに保存',
sys_advanced: '詳細設定',
sys_startup_config: '起動設定:',
sys_startup_warn: '起動設定を直接編集する際は注意してください。ロックアウトされる可能性があります:',
sys_clear_config: '起動設定クリア',
sys_save_startup: '起動設定をフラッシュに保存',
sys_reset: 'スイッチ再起動',
sys_console: 'コンソールコマンド',
sys_enter_cmd: 'コマンド入力:',
sys_send_cmd: 'コマンド送信',
sys_console_warn: 'コンソールコマンドは注意して入力してください。ロックアウトされる可能性があります!',
sys_invalid_ip: '無効な IP: ',
sys_reset_confirm: 'スイッチを再起動してもよろしいですか？',
sys_resetting: 'スイッチを再起動中です。しばらく待ってからページをリロードしてください。',
login_title: 'RTL スイッチ ログイン',
login_heading: 'RTL スイッチ ログイン',
login_wrong: 'パスワードが違います!',
login_password: 'パスワード',
login_login: 'ログイン',
index_title: 'FreeSwitchOS メインページ',
index_heading: 'スイッチ設定',
index_settings: '設定',
update_title: 'ファームウェア更新',
update_heading: 'ファームウェア更新',
update_instruction: 'アップロードするファームウェアファイルを選択:',
update_upload: 'ファイルをアップロード',
common_port: 'ポート ',
common_pkts: ' pkts',
},
zh: {
nav_overview: '概览',
nav_port_config: '端口配置',
nav_port_stat: '端口统计',
nav_l2: 'L2 配置',
nav_mirror: '端口镜像',
nav_lag: '链路聚合',
nav_eee: 'EEE',
nav_bandwidth: '带宽限制',
nav_system: '系统设置',
nav_fw_update: '固件升级',
port_name: '名称',
port_status: '状态',
port_not_enabled: '未启用。',
port_link_speed: '链路速率',
port_vendor: '厂商',
port_model: '型号',
port_serial: '序列号',
port_temp: '温度',
port_vcc: '供电电压',
port_tx_fault: 'TX 故障',
port_tx_disabled: 'TX 禁用',
port_tx_bias: 'TX 偏置电流',
port_tx_power: 'TX 光功率',
port_rx_power: 'RX 光功率',
port_rx_los: 'RX 信号丢失',
speed_disabled: '禁用',
speed_down: '未连接',
port_title: 'FreeSwitchOS 端口配置',
port_heading: '端口配置',
port_col_port: '端口',
port_col_name: '名称',
port_col_speed: '当前链路速率',
port_col_set_speed: '设置速率',
port_col_disabled: '禁用',
port_col_apply: '应用',
port_mtu_heading: '配置端口转发的最大帧大小 (MTU)',
port_auto: '自动',
port_2500m: '2500Mbps/全双工',
port_1000m: '1000Mbps/全双工',
port_100m_f: '100Mbps/全双工',
port_100m_h: '100Mbps/半双工',
port_10m_f: '10Mbps/全双工',
port_10m_h: '10Mbps/半双工',
port_apply: '应用',
stat_title: 'FreeSwitchOS 端口统计',
stat_heading: '端口统计',
stat_detailed: '详细端口统计',
stat_close: '关闭',
stat_col_port: '端口',
stat_col_name: '名称',
stat_col_link: '链路',
stat_col_tx_good: 'TX 正常包',
stat_col_tx_bad: 'TX 错误包',
stat_col_rx_good: 'RX 正常包',
stat_col_rx_bad: 'RX 错误包',
stat_col_all: '所有计数器',
stat_counter: '计数器',
stat_value: '值',
stat_show: '查看',
vlan_title: 'FreeSwitchOS VLAN 配置',
vlan_heading: 'VLAN 配置',
vlan_select: 'VLAN 选择:',
vlan_choose: '-- 请选择 VLAN --',
vlan_id: 'VLAN ID:',
vlan_get_config: '获取配置',
vlan_name: 'VLAN 名称:',
vlan_tagged: 'Tagged 端口',
vlan_untagged: 'Untagged 端口',
vlan_select_all: '全选',
vlan_pvid: '作为入方向流量的默认 VLAN (PVID)',
vlan_update: '更新 / 创建',
vlan_configured: '已配置 VLAN',
vlan_col_name: '名称',
vlan_col_member: '成员端口',
vlan_col_tagged: 'Tagged 端口',
vlan_col_untagged: 'Untagged 端口',
vlan_col_pvid: 'PVID 端口',
vlan_col_delete: '删除',
vlan_set_id_first: '请先设置 VLAN ID',
vlan_delete_confirm: '删除 VLAN ',
lag_title: '链路聚合配置',
lag_heading: '链路聚合组配置',
lag_update: '更新 / 创建',
mirror_title: '端口镜像配置',
mirror_heading: '端口镜像配置',
mirror_enabled: '启用:',
mirror_port: '镜像目的端口:',
mirror_tx: '被镜像端口 (TX)',
mirror_rx: '被镜像端口 (RX)',
mirror_update: '更新 / 创建',
mirror_disable: '禁用端口镜像',
mirror_set_port_first: '请先设置镜像目的端口',
mirror_select_ports: '请选择被镜像端口',
eee_title: 'EEE 配置',
eee_heading: 'EEE 状态',
eee_advertising: '本端通告',
eee_partner: '链路伙伴通告',
eee_port: '端口',
eee_active: '已生效?',
eee_enable: '启用 EEE',
eee_disable: '禁用 EEE',
eee_on: '开',
eee_off: '关',
l2_title: 'FreeSwitchOS L2 配置',
l2_heading: 'L2 配置',
l2_col_port: '端口',
l2_col_type: '类型',
l2_col_remove: '删除条目',
l2_shown: 'Shown:',
l2_delete: '删除',
l2_static: '静态',
l2_learned: '动态学习',
bw_title: '入方向/出方向带宽限制',
bw_heading: '入方向/出方向带宽限制',
bw_ingress: '入方向',
bw_egress: '出方向',
bw_col_port: '端口',
bw_col_limit: '限速',
bw_col_bandwidth: '带宽 [kbit/s]',
bw_col_flow: '流量控制',
bw_col_apply: '应用',
bw_unlimited: '不限速',
sys_title: '系统设置',
sys_tab_system: '系统',
sys_tab_advanced: '高级',
sys_tab_console: '控制台',
sys_heading: '系统设置',
sys_ip: 'IP 地址:',
sys_model: '型号:',
sys_hostname: '主机名:',
sys_apply: '应用',
sys_netmask: '子网掩码:',
sys_gateway: '网关:',
sys_language: '语言:',
sys_mgmt_vlan: 'Management VLAN:',
sys_mgmt_untagged: 'untagged',
sys_mgmt_confirm: 'Move switch management to VLAN ',
sys_mgmt_warn: 'The switch will start tagging its own traffic with that VLAN. If the port you are connected through does not carry it, this page becomes unreachable and the setting can only be undone over the console. Continue?',
sys_ip_note: '更新上述设置后，请使用新的 IP 地址重新访问管理界面:',
sys_update: '更新设置',
sys_save_label: '将当前全部设置保存到 Flash:',
sys_save: '保存设置到 Flash',
sys_advanced: '高级设置',
sys_startup_config: '启动配置:',
sys_startup_warn: '直接编辑启动配置时请谨慎，错误配置可能导致无法访问设备:',
sys_clear_config: '清除启动配置',
sys_save_startup: '保存启动配置到 Flash',
sys_reset: '重启交换机',
sys_console: '控制台命令',
sys_enter_cmd: '输入命令:',
sys_send_cmd: '发送命令',
sys_console_warn: '输入控制台命令时请谨慎，错误命令可能导致无法访问设备!',
sys_invalid_ip: '无效 IP: ',
sys_reset_confirm: '确定要重启交换机吗?',
sys_resetting: '交换机正在重启。请稍候并刷新页面。',
login_title: 'RTL 交换机登录',
login_heading: 'RTL 交换机登录',
login_wrong: '密码错误!',
login_password: '密码',
login_login: '登录',
index_title: 'FreeSwitchOS 主页',
index_heading: '交换机配置',
index_settings: '设置',
update_title: '固件升级',
update_heading: '固件升级',
update_instruction: '请选择要上传的固件文件:',
update_upload: '上传文件',
common_port: '端口 ',
common_pkts: ' 个包',
}
};
var rtlLang = (function() {
var saved = localStorage.getItem('rtl_lang');
if (saved && LANG[saved]) return saved;
var browser = (navigator.language || navigator.userLanguage || 'en').substring(0, 2);
return LANG[browser] ? browser : 'en';
})();
function t(key) {
return LANG[rtlLang][key] || LANG['en'][key] || key;
}
function setLang(lang) {
if (LANG[lang]) {
localStorage.setItem('rtl_lang', lang);
rtlLang = lang;
document.querySelectorAll('[data-i18n]').forEach(function(el) {
applyTranslation(el);
});
}
}
function applyTranslation(el) {
var key = el.getAttribute('data-i18n');
if (!key) return;
if (el.tagName === 'INPUT' && (el.type === 'submit' || el.type === 'button')) {
el.value = t(key);
} else if (el.tagName === 'OPTION') {
el.textContent = t(key);
} else if (el.tagName === 'TITLE') {
el.textContent = t(key);
} else {
el.innerHTML = t(key);
}
}
document.addEventListener('DOMContentLoaded', function() {
document.querySelectorAll('[data-i18n]').forEach(function(el) {
applyTranslation(el);
});
});
html/index.html
+11 -3
View File
@@ -2,18 +2,26 @@
<html>
<script src="/main.js"></script>
<script src="/main_info.js"></script>
<script src="/i18n.js"></script>
<script>
window.addEventListener("load", function() {
update( () => {
const interval = setInterval(update, 2000);
});
});
</script>
<link rel="stylesheet" href="style.css">
<title>FreeSwitchOS Main Page</title>
<title data-i18n="index_title">FreeSwitchOS Main Page</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1>Switch Configuration</h1>
<h1 data-i18n="index_heading">Switch Configuration</h1>
<table id="infoTable">
<tr>
<th colspan="2">Settings</th>
<th colspan="2" data-i18n="index_settings">Settings</th>
</tr>
<tbody>
</tbody>
html/l2.html
+14 -3
View File
@@ -1,16 +1,27 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title>FreeSwitchOS L2 Configuration</title>
<title data-i18n="l2_title">FreeSwitchOS L2 Configuration</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1>L2 Configuration</h1>
<h1 data-i18n="l2_heading">L2 Configuration</h1>
<p><span data-i18n="l2_shown">Shown:</span> <span id="l2count">-</span></p>
<table id="l2table">
<tr> <th>Port</th> <th>MAC</th> <th>VLAN</th> <th>Type</th> <th>Remove Entry</th></tr>
<tr>
<th><span class="l2sort" onclick="l2SortBy('port')"><span data-i18n="l2_col_port">Port</span><span id="l2a_port" class="l2arrow"></span></span><br>
<input id="l2f_port" class="l2filter" oninput="l2FilterChanged()" size="5"></th>
<th><span class="l2sort" onclick="l2SortBy('mac')">MAC<span id="l2a_mac" class="l2arrow"></span></span><br>
<input id="l2f_mac" class="l2filter" oninput="l2FilterChanged()" size="14"></th>
<th><span class="l2sort" onclick="l2SortBy('vlan')">VLAN<span id="l2a_vlan" class="l2arrow"></span></span><br>
<input id="l2f_vlan" class="l2filter" oninput="l2FilterChanged()" size="5"></th>
<th><span class="l2sort" onclick="l2SortBy('type')"><span data-i18n="l2_col_type">Type</span><span id="l2a_type" class="l2arrow"></span></span><br>
<input id="l2f_type" class="l2filter" oninput="l2FilterChanged()" size="8"></th>
<th data-i18n="l2_col_remove">Remove Entry</th></tr>
<script src="/l2.js"></script>
</table>
</div>
html/l2.js
+76 -54
View File
@@ -1,7 +1,3 @@
var l2GetInterval;
var l2Entries = [];
var l2CurrentEntry = 0;
function fillStats() {
var tbl = document.getElementById('statstable');
if (!numPorts)
@@ -9,22 +5,22 @@ function fillStats() {
if (tbl.rows.length > 1) {
for (let i = 0; i < numPorts; i++) {
console.log("Table Update row: " + i + " state " + pState[i] + " is " + linkS[pState[i] +1]);
tbl.rows[i+1].cells[1].innerHTML = `${linkS[pState[i]+1]}`;
tbl.rows[i+1].cells[2].innerHTML = `${txG[i]} pkts`;
tbl.rows[i+1].cells[3].innerHTML = `${txB[i]} pkts`;
tbl.rows[i+1].cells[4].innerHTML = `${rxG[i]} pkts`;
tbl.rows[i+1].cells[5].innerHTML = `${rxB[i]} pkts`;
tbl.rows[i+1].cells[1].innerHTML = linkText(pState[i]+1);
tbl.rows[i+1].cells[2].innerHTML = `${txG[i]}` + t('common_pkts');
tbl.rows[i+1].cells[3].innerHTML = `${txB[i]}` + t('common_pkts');
tbl.rows[i+1].cells[4].innerHTML = `${rxG[i]}` + t('common_pkts');
tbl.rows[i+1].cells[5].innerHTML = `${rxB[i]}` + t('common_pkts');
}
} else {
for (let i = 0; i < numPorts; i++) {
console.log("Table row: " + i);
const tr = tbl.insertRow();
let td = tr.insertCell(); td.appendChild(document.createTextNode(`Port ${i+1}`));
td = tr.insertCell(); td.appendChild(document.createTextNode(`${linkS[pState[i]+1]}`));
td = tr.insertCell(); td.appendChild(document.createTextNode(`${txG[i]} pkts`));
td = tr.insertCell();td.appendChild(document.createTextNode(`${txB[i]} pkts`));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxG[i]} pkts`));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxB[i]} pkts`));
let td = tr.insertCell(); td.appendChild(document.createTextNode(t('common_port') + (i+1)));
td = tr.insertCell(); td.appendChild(document.createTextNode(linkText(pState[i]+1)));
td = tr.insertCell(); td.appendChild(document.createTextNode(`${txG[i]}` + t('common_pkts')));
td = tr.insertCell();td.appendChild(document.createTextNode(`${txB[i]}` + t('common_pkts')));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxG[i]}` + t('common_pkts')));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxB[i]}` + t('common_pkts')));
}
}
}
@@ -64,6 +60,51 @@ function delL2(idx) {
xhttp.timeout = 1500; xhttp.send();
}
var l2All = [];
const l2Cols = ['port', 'mac', 'vlan', 'type'];
var l2SortCol = 'port';
var l2SortDir = 1;
function l2Key(e, col) {
if (col === 'port') return e.port === 'CPU' ? Number.MAX_SAFE_INTEGER : Number(e.port);
if (col === 'vlan') return Number(e.vlan);
return String(e[col]).toLowerCase();
}
function l2SortBy(col) {
l2SortDir = (col === l2SortCol) ? -l2SortDir : 1;
l2SortCol = col;
renderL2();
}
function l2FilterChanged() { renderL2(); }
function renderL2() {
var tbl = document.getElementById('l2table');
if (!tbl) return;
var f = {};
l2Cols.forEach(function(c) {
var el = document.getElementById('l2f_' + c);
f[c] = el ? el.value.trim().toLowerCase() : '';
});
var rows = l2All.filter(function(e) {
return l2Cols.every(function(c) {
return !f[c] || String(e[c]).toLowerCase().indexOf(f[c]) !== -1;
});
});
rows.sort(function(a, b) {
var x = l2Key(a, l2SortCol), y = l2Key(b, l2SortCol);
return (x < y ? -1 : x > y ? 1 : 0) * l2SortDir;
});
l2Cols.forEach(function(c) {
var a = document.getElementById('l2a_' + c);
if (a) a.textContent = (c === l2SortCol) ? (l2SortDir > 0 ? ' \u25b2' : ' \u25bc') : ' \u21c5';
});
paintL2(tbl, rows);
var cnt = document.getElementById('l2count');
if (cnt) cnt.textContent = rows.length + ' / ' + l2All.length;
}
function fillL2(s)
{
var tbl = document.getElementById('l2table');
@@ -71,7 +112,12 @@ function fillL2(s)
return;
s.sort(l2CMP);
s = uniq(s);
var s = s.map(function(e) { e.port = e.port != 9 ? e.port : "CPU"; return e; });
l2All = s;
renderL2();
}
function paintL2(tbl, s)
{
console.log("L2: ", JSON.stringify(s));
for (let i = 0; i < s.length; i++) {
var e = s[i];
@@ -80,60 +126,36 @@ function fillL2(s)
tbl.rows[i+1].cells[0].innerHTML = `${e.port}`;
tbl.rows[i+1].cells[1].innerHTML = `${e.mac}`;
tbl.rows[i+1].cells[2].innerHTML = `${e.vlan}`;
tbl.rows[i+1].cells[4].innerHTML = '<button type="button" onclick="delL2(' + e.idx + ');">Delete</button>';
tbl.rows[i+1].cells[3].innerHTML = `${e.type}`;
tbl.rows[i+1].cells[4].innerHTML = '<button type="button" onclick="delL2(' + e.idx + ');">' + t('l2_delete') + '</button>';
} else {
const tr = tbl.insertRow();
let td = tr.insertCell(); td.innerHTML = `${e.port}`;
td = tr.insertCell(); td.innerHTML = `${e.mac}`;
td = tr.insertCell(); td.innerHTML = `${e.vlan}`;
td = tr.insertCell(); td.innerHTML = `${e.type}`;
td = tr.insertCell(); td.innerHTML = '<button type="button" onclick="delL2(' + e.idx + ');">Delete</button>';
td = tr.insertCell(); td.innerHTML = '<button type="button" onclick="delL2(' + e.idx + ');">' + t('l2_delete') + '</button>';
}
}
for (let i = tbl.rows.length - 1; i > s.length; i--)
tbl.deleteRow(i);
l2Entries = [];
}
function getL2() {
var xhttp = new XMLHttpRequest();
xhttp.onreadystatechange = function() {
if (this.readyState == 4 && this.status == 200) {
var s = JSON.parse(xhttp.responseText);
var s = s.map(function(e) {
e.vlan = parseInt(e.vlan, 16);
e.idx = parseInt(e.idx, 16);
e.type = e.type == "s" ? "static" : "learned";
e.port = e.port == 9 ? 9 : logToPhysPort[e.port];
return e;
});
l2Entries.push(...s);
if (l2Entries >= 4096) {
l2Entries = [];
l2CurrentEntry = 0;
clearInterval(l2GetInterval);
return;
}
var w = 0;
for (var i = l2Entries.length-1; i > 0; i--) {
if (l2Entries[0].idx == l2Entries[i].idx) {
w = 1;
break;
}
}
if (w) {
l2CurrentEntry = 0;
fillL2(l2Entries);
} else {
l2CurrentEntry = s[s.length-1].idx + 1;
}
walkL2(function(entries, ok) {
if (ok) {
for (var i = 0; i < entries.length; i++)
entries[i].type = entries[i].type == "s" ? t('l2_static') : t('l2_learned');
fillL2(entries);
}
};
xhttp.open("GET", "/l2.json?idx=" + l2CurrentEntry, true);
xhttp.timeout = 1500; xhttp.send();
setTimeout(getL2, 1000);
});
}
window.addEventListener("load", function() {
l2GetInterval = setInterval(getL2, 1000);
update( () => {
getL2();
const interval = setInterval(update, 2000);
});;
});
html/lag.html
+7 -6
View File
@@ -1,24 +1,25 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title>Link Aggregation Configuration</title>
<title data-i18n="lag_title">Link Aggregation Configuration</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1>Link Aggregation Groups Configuration</h1>
<h2>LAG 1 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub0" onclick="lagSub(0);" type="button" value="Update / Create"></h2>
<h1 data-i18n="lag_heading">Link Aggregation Groups Configuration</h1>
<h2>LAG 1 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub0" onclick="lagSub(0);" type="button" data-i18n="lag_update" value="Update / Create"></h2>
<div id="mLAG0"></div>
<br />
<h2>LAG 2 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub1" onclick="lagSub(1);" type="button" value="Update / Create"></h2>
<h2>LAG 2 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub1" onclick="lagSub(1);" type="button" data-i18n="lag_update" value="Update / Create"></h2>
<div id="mLAG1"></div>
<br />
<h2>LAG 3 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub2" onclick="lagSub(2);" type="button" value="Update / Create"></h2>
<h2>LAG 3 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub2" onclick="lagSub(2);" type="button" data-i18n="lag_update" value="Update / Create"></h2>
<div id="mLAG2"></div>
<br />
<h2>LAG 4 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub3" onclick="lagSub(3);" type="button" value="Update / Create"></h2>
<h2>LAG 4 <input style="width:15%;margin-left: 3em;" class="action" id="l_sub3" onclick="lagSub(3);" type="button" data-i18n="lag_update" value="Update / Create"></h2>
<div id="mLAG3"></div>
<script src="/lag.js"></script>
</div>
html/lag.js
+8 -5
View File
@@ -3,7 +3,6 @@ var lagInterval = Number();
function lagForm() {
if (!numPorts)
return;
clearInterval(lagInterval);
for (let j=0; j < 4; j++) {
var lag = "mLAG" + j
console.log("Adding LAG " + lag)
@@ -35,9 +34,6 @@ function setL(p, c){
console.log("LAG setting: ", p, " to ", c);
document.getElementById(p).checked=c;
}
window.addEventListener("load", function() {
lagInterval = setInterval(lagForm, 200);
});
function fetchLag() {
var xhttp = new XMLHttpRequest();
@@ -58,7 +54,7 @@ function fetchLag() {
}
};
xhttp.open("GET", `/lag.json`, true);
xhttp.send();
sendXHTTP(xhttp);
}
async function lagSub(l) {
var cmd = "lag " + l;
@@ -76,3 +72,10 @@ async function lagSub(l) {
console.error(`Error: ${err}`);
}
}
window.addEventListener("load", function() {
update( () => {
lagForm();
const interval = setInterval(update, 2000);
});
});
html/login.html
+8 -8
View File
@@ -1,30 +1,30 @@
<!DOCTYPE html>
<html>
<title>RTL Switch Login</title>
<title data-i18n="login_title">RTL Switch Login</title>
<link rel="stylesheet" href="style.css">
<script src="/i18n.js"></script>
<script>
function removeNote() {
document.getElementById("incorrect").innerHTML = "";
}
window.addEventListener("load", function() {
if (document.referrer.endsWith("login.html"))
document.getElementById("incorrect").innerHTML = "Wrong password!";
document.getElementById("incorrect").innerHTML = t('login_wrong');
});
</script>
</script>
</head>
<body class="login_page">
<div class = "center">
<h1> RTL Switch Login</h1>
<h1 data-i18n="login_heading"> RTL Switch Login</h1>
<form method="post" action="login">
<div class="txt_field">
<input name="pwd" type="password" onclick="removeNote()" required />
<input name="pwd" type="password" autocomplete="current-password" onclick="removeNote()" required />
<span></span>
<label>Password</label>
<label data-i18n="login_password">Password</label>
</div>
<input type="submit" value="Login"/>
<input type="submit" data-i18n="login_login" value="Login"/>
<h3 id="incorrect" style="margin-top: 5em;"></h3>
</form>
</body>
</html>
html/main.js
+261 -28
View File
@@ -2,13 +2,17 @@ var txG = new BigInt64Array(10);
var txB = new BigInt64Array(10);
var rxG = new BigInt64Array(10);
var rxB = new BigInt64Array(10);
const linkS = ["Disabled", "Down", "10M", "100M", "1000M", "500M", "10G", "2.5G", "5G"];
const linkS = [function(){return t('speed_disabled')}, function(){return t('speed_down')}, "10M", "100M", "1000M", "500M", "10G", "2.5G", "5G"];
var pState = new Int8Array(10);
var pIsSFP = new Int8Array(10);
var pAdvertised = new Int8Array(10);
var numPorts = 0;
function linkText(idx) { var v = linkS[idx]; return typeof v === 'function' ? v() : v; }
var logToPhysPort = new Int8Array(10);
var physToLogPort = new Int8Array(10);
var portNames = new Array(10);
var currentRequests = [];
var currentCallback;
function drawPorts() {
var f = document.getElementById('ports');
console.log("DRAWING PORTS: ", numPorts);
@@ -18,7 +22,7 @@ function drawPorts() {
d.classList.add('tooltip');
const s = document.createElement("span");
s.classList.add("tooltiptext");
s.innerHTML = "Tooltip text";
s.innerHTML = t('common_port');
s.id="tt_" + (i+1);
const l = document.createElement("object");
d.appendChild(l);
@@ -38,9 +42,86 @@ function drawPorts() {
}
}
function update() {
function parseUint16(val) {
return parseInt(val, 16) & 0xffff;
}
function parseInt16(val) {
let valInt = parseInt(val, 16);
let num = valInt & 0x7fff;
if (valInt & 0x8000) {
return num - 0x8000;
}
return num;
}
function applyCalibrationSlopeOffset(val, cal) {
if (typeof cal !== 'string') {
return val;
}
if (cal.startsWith("0x")) {
cal = cal.substring(2);
}
if (cal.length != 8) {
return val;
}
let slope = parseUint16(cal.substring(0, 4)) / 256;
let offset = parseInt16(cal.substring(4, 8));
return slope * val + offset;
}
function applyRxPowerCalibration(val, cal) {
if (typeof cal !== 'string') {
return val;
}
if (cal.startsWith("0x")) {
cal = cal.substring(2);
}
if (cal.length != 40) {
return val;
}
let bytes = cal.match(/.{1,2}/g).map(function (x) { return parseInt(x, 16); });
let view = new DataView(new Uint8Array(bytes).buffer);
return view.getFloat32(0) * Math.pow(val, 4)
+ view.getFloat32(4) * Math.pow(val, 3)
+ view.getFloat32(8) * Math.pow(val, 2)
+ view.getFloat32(12) * val
+ view.getFloat32(16);
}
function decodeSfpTemp(val, cal) {
let temp = parseInt16(val);
return applyCalibrationSlopeOffset(temp, cal) / 256;
}
function decodeSfpVcc(val, cal) {
let vcc = parseUint16(val);
return applyCalibrationSlopeOffset(vcc, cal) / 10000;
}
function decodeSfpTxBias(val, cal) {
let bias = parseUint16(val);
return applyCalibrationSlopeOffset(bias, cal) / 500;
}
function decodeSfpTxPower(val, cal) {
let txPower = parseUint16(val);
return applyCalibrationSlopeOffset(txPower, cal) / 10000;
}
function decodeSfpRxPower(val, cal) {
let rxPower = parseUint16(val);
return applyRxPowerCalibration(rxPower, cal) / 10000;
}
function convertPowerTodBm(val) {
return 10 * Math.log10(val);
}
function update(callback) {
var xhttp = new XMLHttpRequest();
xhttp.onreadystatechange = function() {
console.log("IN UPDATE ");
if (this.readyState == 4 && this.status == 401)
document.location = "/login.html"
if (this.readyState == 4 && this.status == 200) {
@@ -57,6 +138,7 @@ function update() {
let n = p.portNum;
logToPhysPort[p.logPort] = n;
physToLogPort[n-1] = p.logPort;
portNames[p.logPort] = p.name;
let pid = "port" + n;
let ttid = "tt_" + n;
n--;
@@ -67,16 +149,25 @@ function update() {
continue;
var bgs = psvg.contentDocument.getElementsByClassName("bg");
var leds = psvg.contentDocument.getElementsByClassName("led");
if (leds[0] == null || leds[0].style == null)
continue;
const portName = p.name || portNames[p.logPort] || '';
var iHTML = "<table border=\"0\" class=\"tt_table\">";
if (portName) iHTML += "<tr><td align=\"left\">" + t('port_name') + "</td><td>:</td><td>" + portName + "</td></tr>";
if (p.enabled == 0) {
pState[n] = -1;
bgs[0].style.fill = "red";
leds[0].style.fill = "black"; leds[1].style.fill = "black";
psvg.style.opacity = 0.4;
tt.innerHTML = "Not enabled.";
iHTML += "<tr><td align=\"left\">" + t('port_status') + "</td><td>:</td><td>" + t('port_not_enabled') + "</td></tr>";
iHTML += "</table>";
tt.innerHTML = iHTML;
} else {
psvg.style.opacity = 1.0;
pState[n] = p.link;
if (p.link == 4 || p.link == 5 || p.link == 6) {
if (p.link == 5 || p.link == 7) {
leds[0].style.fill = "green"; leds[1].style.fill = "blue";
} else if (p.link == 4 || p.link == 6) {
leds[0].style.fill = "green"; leds[1].style.fill = "orange";
} else if (p.link == 1 || p.link == 2 || p.link == 3) {
leds[0].style.fill = "green"; leds[1].style.fill = "green";
@@ -84,34 +175,176 @@ function update() {
leds[0].style.fill = "black"; leds[1].style.fill = "black";
psvg.style.opacity = 0.4
}
var iHTML = "<table border=\"0\" class=\"tt_table\">";
iHTML += "<tr><td align=\"left\">Link speed</td><td>:</td><td>" + linkS[p.link + 1] + "</td></tr>";
iHTML += "<tr><td align=\"left\">" + t('port_link_speed') + "</td><td>:</td><td>" + linkText(p.link + 1) + "</td></tr>";
if (p.isSFP) {
pAdvertised[n] = 0;
iHTML += "<tr><td>Vendor</td><td>:</td><td>" + p.sfp_vendor + "</td></tr>";
iHTML += "<tr><td>Model</td><td>:</td><td>" + p.sfp_model + "</td></tr>";
iHTML += "<tr><td>Serial</td><td>:</td><td>" + p.sfp_serial + "</td></tr>";
if (p.sfp_options & 0x40) {
iHTML += "<tr><td>Temp</td><td>:</td><td>" + (Number(p.sfp_temp) >> 8) + "." + ((Number(p.sfp_temp) & 0xff)/256.0 * 100).toFixed(0) + "&#8239;&#8451;</td></tr>";
iHTML += "<tr><td>Vcc</td><td>:</td><td>" + (Number(p.sfp_vcc) / 10000.0).toFixed(2) + "&#8239;V</td></tr>";
iHTML += "<tr><td>TX-Bias</td><td>:</td><td>" + (Number(p.sfp_txbias) / 500.0).toFixed(1) + "&#8239;mA</td></tr>";
iHTML += "<tr><td>TX-Power</td><td>:</td><td>" + (Number(p.sfp_txpower) / 10.0).toFixed(0) + "&#8239;mW</td></tr>";
iHTML += "<tr><td>RX-Power</td><td>:</td><td>" + (Number(p.sfp_rxpower) / 10.0).toFixed(0) + "&#8239;mW</td></tr>";
pAdvertised[n] = 0;
const hasExtendedStatus = p.sfp_options & 0x40;
iHTML += "<tr><td>" + t('port_vendor') + "</td><td>:</td><td>" + p.sfp_vendor + "</td></tr>";
iHTML += "<tr><td>" + t('port_model') + "</td><td>:</td><td>" + p.sfp_model + "</td></tr>";
iHTML += "<tr><td>" + t('port_serial') + "</td><td>:</td><td>" + p.sfp_serial + "</td></tr>";
if (hasExtendedStatus) {
let txPower = decodeSfpTxPower(p.sfp_txpower, p.sfp_txpower_cal);
let txPowerdBm = convertPowerTodBm(txPower);
let rxPower = decodeSfpRxPower(p.sfp_rxpower, p.sfp_rxpower_cal);
let rxPowerdBm = convertPowerTodBm(rxPower);
iHTML += "<tr><td>" + t('port_temp') + "</td><td>:</td><td>" + decodeSfpTemp(p.sfp_temp, p.sfp_temp_cal).toFixed(2) + "&#8239;&#8451;</td></tr>";
iHTML += "<tr><td>" + t('port_vcc') + "</td><td>:</td><td>" + decodeSfpVcc(p.sfp_vcc, p.sfp_vcc_cal).toFixed(2) + "&#8239;V</td></tr>";
iHTML += "<tr><td>" + t('port_tx_fault') + "</td><td>:</td><td>" + (Boolean(Number(p.sfp_state) & 0x4)) + "</td></tr>";
iHTML += "<tr><td>" + t('port_tx_disabled') + "</td><td>:</td><td>" + (Boolean(Number(p.sfp_state) & 0x80)) + "</td></tr>";
iHTML += "<tr><td>" + t('port_tx_bias') + "</td><td>:</td><td>" + decodeSfpTxBias(p.sfp_txbias, p.sfp_txbias_cal).toFixed(1) + "&#8239;mA</td></tr>";
iHTML += "<tr><td>" + t('port_tx_power') + "</td><td>:</td><td>" + txPower.toFixed(3) + "&#8239;mW / " + txPowerdBm.toFixed(2) + "&#8239;dBm</td></tr>";
iHTML += "<tr><td>" + t('port_rx_power') + "</td><td>:</td><td>" + rxPower.toFixed(3) + "&#8239;mW / " + rxPowerdBm.toFixed(2) + "&#8239;dBm</td></tr>";
}
// Not all devices & modules have LOS pin...
const rx_los_pin = p.sfp_los !== null ? Boolean(Number(p.sfp_los)) : null;
const rx_los_module = hasExtendedStatus ? Boolean(Number(p.sfp_state) & 0x2) : null;
if (rx_los_module !== null || rx_los_pin !== null) {
iHTML += `<tr><td>` + t('port_rx_los') + `</td><td>:</td><td>${rxLosHTML(rx_los_pin, rx_los_module)}</td></tr>`;
}
} else {
pAdvertised[n] = parseInt(p.adv, 2);
}
};
iHTML += "</table>";
tt.innerHTML = iHTML;
}
}
}
};
xhttp.open("GET", "/status.json", true);
xhttp.timeout = 5000; xhttp.send();
}}
if (callback)
callback();
}};
xhttp.open("GET", "/status.json", true);
xhttp.timeout = 5000;
sendXHTTP(xhttp);
}
window.addEventListener("load", function() {
update();
const interval = setInterval(update, 2000);
});
function rxLosHTML(pinStatus, moduleStatus) {
if (moduleStatus !== null && pinStatus !== null && moduleStatus !== pinStatus) {
return `pin=${pinStatus}<br/>mod=${moduleStatus}<br/>❗❗❗❗`;
}
// Returns first non null value
return moduleStatus ?? pinStatus;
}
function callbackXHTTP()
{
x = currentRequests.shift();
x.onreadystatechange = currentCallback;
x.onreadystatechange();
if (currentRequests.length === 0)
return;
x = currentRequests[0];
currentCallback = x.onreadystatechange;
x.onreadystatechange = callbackXHTTP;
var retries = 10;
while (retries) {
try {
setTimeout(() => {
x.send();
console.log("B1");
}, 20);
} catch (error) {
retries--;
setTimeout(() => {
console.log(`Retry ${retries}/${maxRetries} failed: ${error.message}`);
}, 200);
if (retries < 1) {
throw error;
}
}
console.log("B2");
return;
}
}
function sendXHTTP(x)
{
console.log("sendXHTTP ", x);
if (currentRequests.length === 0) {
currentRequests.push(x);
currentCallback = x.onreadystatechange;
x.onreadystatechange = callbackXHTTP;
var retries = 10;
while (retries) {
try {
x.send();
console.log("A1");
} catch (error) {
retries--;
setTimeout(() => {
console.log(`Retry ${retries}/${maxRetries} failed: ${error.message}`);
}, 200);
if (retries < 1) {
throw error;
}
}
console.log("A2");
return;
}
console.log("A3");
return;
}
currentRequests.push(x);
}
function walkL2(onDone)
{
var entries = [];
var idx = 0;
var tries = 0;
function retry() {
if (++tries < 3) {
setTimeout(page, 1000);
return;
}
onDone(entries, false);
}
function page() {
var xhttp = new XMLHttpRequest();
xhttp.onreadystatechange = function() {
if (this.readyState != 4)
return;
if (this.status != 200) {
retry();
return;
}
var s;
try {
s = JSON.parse(xhttp.responseText);
} catch (err) {
retry();
return;
}
tries = 0;
s = s.map(function(e) {
e.vlan = parseInt(e.vlan, 16);
e.idx = parseInt(e.idx, 16);
e.port = e.port == 9 ? 'CPU' : logToPhysPort[e.port];
return e;
});
if (!s.length) {
onDone(entries, true);
return;
}
entries.push(...s);
for (var i = entries.length - 1; i > 0; i--) {
if (entries[0].idx == entries[i].idx) {
onDone(entries, true);
return;
}
}
if (entries.length >= 4096) {
onDone(entries, true);
return;
}
idx = s[s.length - 1].idx + 1;
setTimeout(page, 1000);
};
xhttp.open("GET", "/l2.json?idx=" + idx, true);
xhttp.timeout = 1500;
sendXHTTP(xhttp);
}
page();
}
html/mirror.html
+9 -8
View File
@@ -1,23 +1,24 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title>Mirror Configuration</title>
<title data-i18n="mirror_title">Mirror Configuration</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1>Mirror Configuration</h1>
<label class="tswitch">Enabled: <input id="me" type="checkbox"></label><br/>
<label for="mp">Mirroring Port:</label> <input type="number" id="mp" name="mp" min="1" max="9"/>
<h2>Mirrored Ports (TX)</h2>
<h1 data-i18n="mirror_heading">Mirror Configuration</h1>
<label class="tswitch"><span data-i18n="mirror_enabled">Enabled:</span> <input id="me" type="checkbox"></label><br/>
<label for="mp"><span data-i18n="mirror_port">Mirroring Port:</span></label> <input type="number" id="mp" name="mp" min="1" max="9"/>
<h2 data-i18n="mirror_tx">Mirrored Ports (TX)</h2>
<div id="mPortsTX"></div>
<br />
<h2>Mirrored Ports (RX)</h2>
<h2 data-i18n="mirror_rx">Mirrored Ports (RX)</h2>
<div id="mPortsRX"></div>
<br/> <input style="width:15%;" class="action" id="mirror_sub" onclick="mirrorSub();" type="button" value="Update / Create">
<input style="width:15%;" class="action" id="mirror_del" onclick="mirrorDel();" type="button" value="Disable Mirroring">
<br/> <input style="width:15%;" class="action" id="mirror_sub" onclick="mirrorSub();" type="button" data-i18n="mirror_update" value="Update / Create">
<input style="width:15%;" class="action" id="mirror_del" onclick="mirrorDel();" type="button" data-i18n="mirror_disable" value="Disable Mirroring">
<script src="/mirror.js"></script>
<script src="/mirror_sub.js"></script>
</div>
html/mirror.js
+9 -6
View File
@@ -4,7 +4,6 @@ const mirrors = ["mPortsTX", "mPortsRX"];
function mirrorForm() {
if (!numPorts)
return;
clearInterval(mirrorInterval);
for (let j=0; j < mirrors.length; j++) {
console.log("Adding Mirror " + j)
var m = document.getElementById(mirrors[j]);
@@ -34,9 +33,6 @@ function mirrorForm() {
function setM(p, c){
document.getElementById(p).checked=c;
}
window.addEventListener("load", function() {
mirrorInterval = setInterval(mirrorForm, 200);
});
function fetchMirror() {
var xhttp = new XMLHttpRequest();
@@ -51,11 +47,18 @@ function fetchMirror() {
for (let i = 1; i <= numPorts; i++) {
let p = i - 1;
if (numPorts < 9)
p = physToLogPort[p];members & (1<<p)
p = physToLogPort[p];
setM("mPortsTX"+i, m_tx&(1<<p)); setM("mPortsRX"+i, m_rx&(1<<p));
}
}
};
xhttp.open("GET", `/mirror.json`, true);
xhttp.send();
sendXHTTP(xhttp);
}
window.addEventListener("load", function() {
update( () => {
mirrorForm();
const interval = setInterval(update, 2000);
});
});
html/mirror_sub.js
+2 -2
View File
@@ -2,7 +2,7 @@ async function mirrorSub() {
var cmd = "mirror ";
var mp=document.getElementById('mp').value
if (!mp) {
alert("Set Mirroring Port first");
alert(t('mirror_set_port_first'));
return;
}
document.getElementById(mirrors[0]+mp).checked=false;document.getElementById(mirrors[1]+mp).checked=false;
@@ -16,7 +16,7 @@ async function mirrorSub() {
cmd = cmd + ` ${i}r`;
}
if (cmd.length < 10) {
alert("Select Mirrored Ports");
alert(t('mirror_select_ports'));
return;
}
try {
html/navigation.js
+19 -11
View File
@@ -1,12 +1,20 @@
document.getElementById('sidebar').innerHTML =
"<ul><li><a href='index.html'>Overview</a></li>"
+ "<li><a href='ports.html'>Port Configuration</a></li>"
+ "<li><a href='stat.html'>Port Statistics</a></li>"
+ "<li><a href='vlan.html'>VLAN</a></li>"
+ "<li><a href='l2.html'>L2 Configuration</a></li>"
+ "<li><a href='mirror.html'>Mirroring</a></li>"
+ "<li><a href='lag.html'>Link Aggregation</a></li>"
+ "<li><a href='eee.html'>EEE</a></li>"
+ "<li><a href='bandwidth.html'>Bandwidth Limits</a></li>"
+ "<li><a href='system.html'>System Settings</a></li>"
+ "<li><a href='update.html'>Firmware Update</a></li></ul>";
"<ul><li><a href='index.html' data-i18n='nav_overview'>Overview</a></li>"
+ "<li><a href='ports.html' data-i18n='nav_port_config'>Port Configuration</a></li>"
+ "<li><a href='stat.html' data-i18n='nav_port_stat'>Port Statistics</a></li>"
+ "<li><a href='vlan.html' >VLAN</a></li>"
+ "<li><a href='l2.html' data-i18n='nav_l2'>L2 Configuration</a></li>"
+ "<li><a href='mirror.html' data-i18n='nav_mirror'>Mirroring</a></li>"
+ "<li><a href='lag.html' data-i18n='nav_lag'>Link Aggregation</a></li>"
+ "<li><a href='eee.html' data-i18n='nav_eee'>EEE</a></li>"
+ "<li><a href='bandwidth.html' data-i18n='nav_bandwidth'>Bandwidth Limits</a></li>"
+ "<li><a href='system.html' data-i18n='nav_system'>System Settings</a></li>"
+ "<li><a href='update.html' data-i18n='nav_fw_update'>Firmware Update</a></li></ul>";
document.addEventListener('DOMContentLoaded', function() {
var links = document.querySelectorAll('#sidebar a[data-i18n]');
links.forEach(function(el) {
var key = el.getAttribute('data-i18n');
if (key) el.textContent = t(key);
});
});
html/ports.html
+5 -4
View File
@@ -1,19 +1,20 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title>FreeSwitchOS Port Configuration</title>
<title data-i18n="port_title">FreeSwitchOS Port Configuration</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1>Port Configuration</h1>
<h1 data-i18n="port_heading">Port Configuration</h1>
<form id="vform" action="/vlan.html">
<table id="speedtable">
<tr> <th>Port</th> <th>Current Link Speed</th><th>Set Speed</th><th>Disabled</th><th>Apply</th></tr>
<tr> <th data-i18n="port_col_port">Port</th> <th data-i18n="port_col_name">Name</th> <th data-i18n="port_col_speed">Current Link Speed</th><th data-i18n="port_col_set_speed">Set Speed</th><th data-i18n="port_col_disabled">Disabled</th><th data-i18n="port_col_apply">Apply</th></tr>
</table>
<h2 style="margin-top:3em">Configure Maximum Frame Size (MTU) forwarded at Port</h2>
<h2 style="margin-top:3em" data-i18n="port_mtu_heading">Configure Maximum Frame Size (MTU) forwarded at Port</h2>
<table id="mtutable" style="margin-top:1em">
</table>
<script src="/ports.js"></script>
html/ports.js
+24 -21
View File
@@ -3,28 +3,29 @@ var clicked = new Int8Array(10);
function createPortTable() {
var tbl = document.getElementById('speedtable');
if (tbl.rows.length <= 2 && numPorts) {
clearInterval(pTableInterval);
const sSelect = '<select name="speed_sel" id="speed_sel">'
+ '<option value="auto">Auto</option>'
+ '<option value="2g5">2500MBit/Full</option>'
+ '<option value="1g">1000MBit/Full</option>'
+ '<option value="100m full">100MBit/Full</option>'
+ '<option value="100m half">100MBit/Half</option>'
+ '<option value="10m full">10MBit/Full</option>'
+ '<option value="10m half">10MBit/Half</option>'
+ '</select>';
const sSelect = '<select name="speed_sel" id="speed_sel">'
+ '<option value="auto">' + t('port_auto') + '</option>'
+ '<option value="2g5">' + t('port_2500m') + '</option>'
+ '<option value="1g">' + t('port_1000m') + '</option>'
+ '<option value="100m full">' + t('port_100m_f') + '</option>'
+ '<option value="100m half">' + t('port_100m_h') + '</option>'
+ '<option value="10m full">' + t('port_10m_f') + '</option>'
+ '<option value="10m half">' + t('port_10m_h') + '</option>'
+ '</select>';
const dSwitch = '<input type="checkbox" id="disable_port" onchange="portOnOff();">'
for (let i = 1; i <= numPorts; i++) {
if (pIsSFP[i-1])
continue;
console.log("Table row: " + i + "pState: " + pState[i-2]);
const tr = tbl.insertRow();
let td = tr.insertCell(); td.appendChild(document.createTextNode(`Port ${i}`));
td = tr.insertCell(); td.innerHTML = linkS[pState[i] + 1];
let td = tr.insertCell(); td.appendChild(document.createTextNode(t('common_port') + i));
let portName = portNames[physToLogPort[i-1]] || '';
td = tr.insertCell(); td.appendChild(document.createTextNode(portName));
td = tr.insertCell(); td.innerHTML = linkText(pState[i] + 1);
td = tr.insertCell(); td.innerHTML = sSelect.replaceAll("speed_sel", "speed_sel_" + i);
td = tr.insertCell(); td.innerHTML = dSwitch.replaceAll("disable_port", "disable_port_" + i)
.replace("portOnOff()", "portOnOff(" + i + ")");
var button = '<button type="button" style="margin: 0 0 0 24px" onclick="applySpeed(' + i + ');">Apply</button>';
var button = '<button type="button" style="margin: 0 0 0 24px" onclick="applySpeed(' + i + ');">' + t('port_apply') + '</button>';
td = tr.insertCell();
td.innerHTML = button;
}
@@ -54,7 +55,7 @@ function createPortTable() {
tr = tbl.insertRow();
for (let i = 1; i <= numPorts; i++) {
let td = tr.insertCell();
td.innerHTML = '<button type="button" style="margin: 0 0 0 24px" onclick="applyMTU(' + i + ');">Apply</button>';
td.innerHTML = '<button type="button" style="margin: 0 0 0 24px" onclick="applyMTU(' + i + ');">' + t('port_apply') + '</button>';
}
}
}
@@ -67,7 +68,7 @@ function updatePortTable() {
for (let i = 1; i <= numPorts ; i++) {
if (pIsSFP[i-1])
continue;
tbl.rows[i].cells[1].innerHTML = `${linkS[pState[i-1]+1]}`;
tbl.rows[i].cells[2].innerHTML = linkText(pState[i-1]+1);
if (!clicked[i] && pState[i - 1] < 0) {
document.getElementById('speed_sel_' + i).disabled = true;
document.getElementById('disable_port_' + i).checked = true;
@@ -130,17 +131,19 @@ function getMTUs() {
if (!mtu)
continue;
mtu.value = mtus[n];
clearInterval(pMTUInterval);
}
}
};
xhttp.open("GET", "/mtu.json", true);
xhttp.timeout = 1500; xhttp.send();
xhttp.timeout = 1500; sendXHTTP(xhttp);
}
window.addEventListener("load", function() {
const updatePortTableInterval = setInterval(updatePortTable, 1000);
update( () => {
createPortTable();
updatePortTable();
getMTUs()
const interval = setInterval(update, 2000);
const updatePortTableInterval = setInterval(updatePortTable, 1000);
});
});
const pTableInterval = setInterval(createPortTable, 1000);
const pMTUInterval = setInterval(getMTUs, 1200);
html/stat.html
+6 -5
View File
@@ -1,8 +1,9 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title>FreeSwitchOS Port Statistics</title>
<title data-i18n="stat_title">FreeSwitchOS Port Statistics</title>
<style>
.popup {
display: none;
@@ -31,14 +32,14 @@
<div id="ports"></div>
<div id="popup" class="popup">
<div class="popup-content">
<h2>Detailed Port Statistics</h2>
<h2 data-i18n="stat_detailed">Detailed Port Statistics</h2>
<div id="popup_text"></div>
<button id="closePopup" class="action">Close</button>
<button id="closePopup" class="action" data-i18n="stat_close">Close</button>
</div>
</div>
<h1>Port Statistics</h1>
<h1 data-i18n="stat_heading">Port Statistics</h1>
<table id="statstable">
<tr> <th>Port</th> <th>link</th> <th>TX Good</th> <th>TX Bad</th> <th>RX Good</th> <th>RX Bad</th> <th> All Counters </th></tr>
<tr> <th data-i18n="stat_col_port">Port</th> <th data-i18n="stat_col_name">Name</th> <th data-i18n="stat_col_link">link</th> <th data-i18n="stat_col_tx_good">TX Good</th> <th data-i18n="stat_col_tx_bad">TX Bad</th> <th data-i18n="stat_col_rx_good">RX Good</th> <th data-i18n="stat_col_rx_bad">RX Bad</th> <th data-i18n="stat_col_all"> All Counters </th></tr>
<script src="/stat.js"></script>
</table>
</div>
html/stat.js
+31 -22
View File
@@ -114,7 +114,7 @@ function getCounters(port) {
const s = JSON.parse(xhttp.responseText);
console.log("Counters: ", JSON.stringify(s));
const ptext = document.getElementById('popup_text');
var t = "<table style='width:100%'> <tr> <th>Counter</th> <th>Value</th> <th>Counter</th> <th>Value</th></tr> <tr>";
var tableHtml = "<table style='width:100%'> <tr> <th>" + t('stat_counter') + "</th> <th>" + t('stat_value') + "</th> <th>" + t('stat_counter') + "</th> <th>" + t('stat_value') + "</th></tr> <tr>";
console.log("Counter 0: ", BigInt(s[0]).toString(), " length: ", s.length);
var c = 0;
for (i = 0; i < mib_counters.length; i += 4) {
@@ -125,33 +125,33 @@ function getCounters(port) {
}
var count = BigInt(s[i/4]);
if (mib_counters[i+1] == 8) {
t += "<td>" + mib_counters[i] + "</td><td>" + count.toString() + "</td>";
tableHtml += "<td>" + mib_counters[i] + "</td><td>" + count.toString() + "</td>";
c += 1;
} else if (mib_counters[i+1] == 4) {
if (mib_counters[i] != "") {
t += "<td>" + mib_counters[i] + "</td><td>" + (count >> 32n).toString() + "</td>";
tableHtml += "<td>" + mib_counters[i] + "</td><td>" + (count >> 32n).toString() + "</td>";
c += 1;
}
if (c == 2) {
t += "</tr> <tr>";
tableHtml += "</tr> <tr>";
c = 0;
}
if (mib_counters[i+2] != "") {
t += "<td>" + mib_counters[i+2] + "</td><td>" + (count & 4294967295n).toString() + "</td>";
tableHtml += "<td>" + mib_counters[i+2] + "</td><td>" + (count & 4294967295n).toString() + "</td>";
c += 1;
}
}
if (c == 2) {
t += "</tr> <tr>";
tableHtml += "</tr> <tr>";
c = 0;
}
}
ptext.innerHTML = t + "</tr></table>";
ptext.innerHTML = tableHtml + "</tr></table>";
popup.style.display = 'flex';
}
};
xhttp.open("GET", "/counters.json?port=" + port, true);
xhttp.timeout = 1500; xhttp.send();
xhttp.timeout = 1500; sendXHTTP(xhttp);
}
@@ -162,30 +162,30 @@ function fillStats() {
if (tbl.rows.length > 1) {
for (let i = 0; i < numPorts; i++) {
console.log("Table Update row: " + i + " state " + pState[i] + " is " + linkS[pState[i] +1]);
tbl.rows[i+1].cells[1].innerHTML = `${linkS[pState[i]+1]}`;
tbl.rows[i+1].cells[2].innerHTML = `${txG[i]} pkts`;
tbl.rows[i+1].cells[3].innerHTML = `${txB[i]} pkts`;
tbl.rows[i+1].cells[4].innerHTML = `${rxG[i]} pkts`;
tbl.rows[i+1].cells[5].innerHTML = `${rxB[i]} pkts`;
tbl.rows[i+1].cells[2].innerHTML = linkText(pState[i]+1);
tbl.rows[i+1].cells[3].innerHTML = `${txG[i]}` + t('common_pkts');
tbl.rows[i+1].cells[4].innerHTML = `${txB[i]}` + t('common_pkts');
tbl.rows[i+1].cells[5].innerHTML = `${rxG[i]}` + t('common_pkts');
tbl.rows[i+1].cells[6].innerHTML = `${rxB[i]}` + t('common_pkts');
}
} else {
for (let i = 0; i < numPorts; i++) {
console.log("Table row: " + i);
const tr = tbl.insertRow();
let td = tr.insertCell(); td.appendChild(document.createTextNode(`Port ${i+1}`));
td = tr.insertCell(); td.appendChild(document.createTextNode(`${linkS[pState[i]+1]}`));
td = tr.insertCell(); td.appendChild(document.createTextNode(`${txG[i]} pkts`));
td = tr.insertCell();td.appendChild(document.createTextNode(`${txB[i]} pkts`));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxG[i]} pkts`));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxB[i]} pkts`));
var button = '<button type="button" style="margin: 0 0 0 24px" onclick="getCounters(' + i + ');">Show</button>';
let td = tr.insertCell(); td.appendChild(document.createTextNode(t('common_port') + (i+1)));
let portName = portNames[physToLogPort[i]] || '';
td = tr.insertCell(); td.appendChild(document.createTextNode(portName));
td = tr.insertCell(); td.appendChild(document.createTextNode(linkText(pState[i]+1)));
td = tr.insertCell(); td.appendChild(document.createTextNode(`${txG[i]}` + t('common_pkts')));
td = tr.insertCell();td.appendChild(document.createTextNode(`${txB[i]}` + t('common_pkts')));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxG[i]}` + t('common_pkts')));
td = tr.insertCell();td.appendChild(document.createTextNode(`${rxB[i]}` + t('common_pkts')));
var button = '<button type="button" style="margin: 0 0 0 24px" onclick="getCounters(' + i + ');">' + t('stat_show') + '</button>';
td = tr.insertCell(); td.innerHTML = button;
}
}
}
const stat = setInterval(fillStats, 1000);
const popup = document.getElementById('popup');
const closePopup = document.getElementById('closePopup');
closePopup.addEventListener('click', () => {
@@ -196,3 +196,12 @@ window.addEventListener('click', (event) => {
popup.style.display = 'none';
}
});
window.addEventListener("load", function() {
update( () => {
update();
fillStats();
const stat = setInterval(fillStats, 1000);
const interval = setInterval(update, 2000);
});
});

Some files were not shown because too many files have changed in this diff Show More