gitproxy/RTLPlayground
1
0
Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-08-30 14:52:51 +08:00
Code Issues Packages Projects Releases Wiki Activity

Add support for (Horaco) ZX310S-4T2XH

Browse Source 
Add support for the ZX310S-4T2XH switch, which is a 4x2.5GBit + 1x10GBit + SFP
device. The device does not have any branding and is sold under different
brand names, in particular by Horaco. There is no branding on either label
nor PCB.

CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV
10GBit PHY: RTL8261BE

UART header present, but solder holes are filled with solder that needs
removal, first, e.g with a 1.2mm drill.

The original firmware uses 57600baud 8N1
This commit is contained in:
logicog
2026-04-24 10:53:05 +02:00
parent 2e0e55967c
commit a7f4543698
1 changed files with 45 additions and 1 deletions
Download Patch File Download Diff File Expand all files Collapse all files
machine.c
+45 -1
View File
@@ -544,7 +544,6 @@ __code const struct machine machine = {
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
@@ -571,6 +570,51 @@ __code const struct machine machine = {
void machine_custom_init(void) { }
#elif defined MACHINE_ZX310S_4T2XH
__code const struct machine machine = {
.machine_name = "ZX310S-4T2XH",
.isRTL8373 = 0,
.min_port = 3,
.max_port = 8,
.n_sfp = 1,
.n_10g = 1,
.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
.sfp_port[0].pin_detect = GPIO38,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 },
.reset_pin = GPIO48_I2C_SCL1,
.high_leds = { .mux = LED_28_SYS, .enable = LED_27 | LED_28_SYS | LED_29 },
.led_mux_custom = 1,
.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, // 65e0
0x09, 0x0c, 0x3f, 0x0d, 0x10, // 65e4
0x11, 0x0e, 0x14, 0x11, 0x12, // 65e8
0x15, 0x15, 0x16, 0x18, 0x19, // 65ec
0x1a, 0x19, 0x1d, 0x1e, 0x1c, // 65f0
0x1d, 0x20, 0x21 },
.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
/* Ports 1-4: Orange: 2.5GBit, Green: 10/100/1000MBit
* Port 5: Blue: 10GBit, Green: 10Mbit-5GBit
* SFP-port: Blue: 10GBit, Green 100MBit-5GBit
*/
.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
LEDS_2G5 | LEDS_LINK | LEDS_ACT },
{
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT | LEDS_5G,
LEDS_LINK | LEDS_ACT | LEDS_10G,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
}
},
};
void machine_custom_init(void) { }
#else
#error "Please select a machine type in machine.h"
#endif