Merge pull request #216 from mcaptur/main

Add hardware profile and LED fix for Hi-Source HI-k0801WS

doc/devices/HI-K0801WS.md

@@ -0,0 +1,36 @@
+# Hisource Hi-K0801WS
+
+Following is documentation for unmanaged switch marked as `Hi-K0801WS`.
+
+Using SPI clamp in-board is the only method for initial installation.
+
+### Label specifications
+
+- **Name**: 2.5G Ethernet Switch  
+- **Model**: Hi-K0801WS  
+- **Ports**:  
+  - 8 × RJ45: 10/100/1000/2500 Mbps  
+  - 1 × SFP: 1000 / 2500 / 10000 Mbps  
+
+### What works (expected from label + similar devices)
+
+- All eight 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps  
+- SFP port supporting 1G, 2.5G and 10G modules 
+- LEDs
+
+### PCB overview
+
+**Board markings**  
+- Top silkscreen: PCB-KO801W-V2.0 / DIP-KO801WS-V2.0  
+
+Top side
+
+<img src="photos/K0801W-V2.0-unmanaged\PCB-top.jpg" width="300" />
+
+Bottom
+
+<img src="photos/K0801W-V2.0-unmanaged\PCB-bottom.jpg" width="300" />
+
+## Power supply
+
+Input power is delivered via barell plug, `12V 1A` adapter was provided.

machine.c

@@ -613,6 +613,57 @@ __code const struct machine machine = {
 		    },
 };
 
+
+#elif defined MACHINE_HI_K0801WS
+__code const struct machine machine = {
+    .machine_name = "Hi-Source HI-k0801WS",
+    .isRTL8373 = 1,
+    .min_port = 0,
+    .max_port = 8,
+    .n_sfp = 1,
+    .log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+    .phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = {
+        .sda = GPIO39_I2C_SDA4,
+        .scl = GPIO40_I2C_SCL3_MDC1
+    },
+
+    .reset_pin = GPIO_NA,
+
+    .high_leds = {
+        .mux = LED_27 | LED_29,
+        .enable = LED_28_SYS | LED_29
+    },
+
+    /* Ports 1-8 use set 0, port 9 SFP uses set 1 */
+    .port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .led_sets = {
+        {   /* Set 0: RJ45 copper ports
+             * Amber = 2.5G
+             * Green = 1G/100M/10M with activity
+             */
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT, /* Amber */
+            0,
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* Green */
+            0
+        },
+        {   /* Set 1: SFP port, single green LED for all valid speeds */
+            LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0,
+            0,
+            0
+        },
+    },
+};
+
+
 void machine_custom_init(void) { }
 
 #else

machine.h

@@ -22,6 +22,7 @@
 // #define MACHINE_LIANGUO_ZX_SWTGW215AS
 // #define MACHINE_ZX310S_4T2XH
 // #define MACHINE_DEFAULT_8C_1SFP
+// #define MACHINE_HI_K0801WS
 
 typedef struct {
 	// GPIO pins for SDA/SCL