Merge pull request #465 from andreas5232/add-device-ONT-S207CW-62TS-SE

add support for ONT-S207CW-62TS-SE and identical Binardat-2G06-04210GSM
re-added struct comments again
2026-10-29 17:54:14 +08:00 · 2026-10-08 06:45:31 +00:00 · 2026-10-08 00:32:02 +02:00 · 2026-10-07 01:18:08 +02:00 · 2026-10-07 01:13:20 +02:00 · 2026-10-05 23:51:02 +02:00
12 changed files with 346 additions and 145 deletions
@@ -79,6 +79,7 @@ SRCS += \
 	rtl837x_igmp.c \
 	rtl837x_init.c \
 	rtl837x_leds.c \
+	rtl837x_leds_dump.c \
 	rtl837x_phy.c \
 	rtl837x_pins.c\
 	rtl837x_port.c \
@@ -24,6 +24,7 @@
 #include "version.h"

 #include "machine.h"
+#include "rtl837x_leds.h"
 #include "phy.h"

 #pragma codeseg BANK2
@@ -1976,6 +1977,8 @@ void cmd_parser(void) __banked
 			write_char('\n');
 		} else if (cmd_compare(0, "gpio")) {
 			print_gpio_status();
+		} else if (cmd_compare(0, "leds")) {
+			leds_dump();
 		} else if (cmd_compare(0, "regget")) {
 			parse_regget();
 		} else if (cmd_compare(0, "regset")) {
@@ -0,0 +1,122 @@
+# ONT-S207CW-62TS-SE / Binardat 2G06-04210GSM / Binardat 2G06-04210GS
+
+## Overview
+
+ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS (unmanaged) are **switches with identical hardware**:
+- **CPU:** RTL8372N (confirmed via serial: "Detecting CPU: RTL8372N")
+- **Flash:** GD25Q128E (16MB)
+- **Ports:** 4x 2.5G RJ45 + 2x 10G SFP+
+- **Console:** 115200 baud (RTLPlayground firmware) / 9600 baud (stock firmware)
+
+**Note:** These devices are **RTL8372N-based** with **LAN ports mounted upside-down on the PCB**, requiring a custom configuration. The `MACHINE_ONT_S207CW_62TS_SE` definition uses a **custom configuration** with:
+- Corrected port mapping (physical ports 1-4 = RJ45, 5-6 = SFP)
+- Optimized LED sets for different port wiring (RJ45 Ports 1-2 have reversed LED wiring)
+- Custom LED mux configuration
+
+## Device Photos
+
+### Binardat 2G06-04210GSM
+
+**Front View:**
+<img src="photos/ONT-S207CW-Binardat-2G06-04210GSM/binardat-2g06-04210gsm-front.jpg" width="400" />
+
+**Back View:**
+<img src="photos/ONT-S207CW-Binardat-2G06-04210GSM/binardat-2g06-04210gsm-back.jpg" width="400" />
+
+**PCB View:**
+<img src="photos/ONT-S207CW-Binardat-2G06-04210GSM/binardat-2g06-04210gsm-pcb.jpg" width="400" />
+
+*Photos courtesy of [andreas5232](https://github.com/andreas5232) from [emesix/ONT-S207CW-62TS-SE#1](https://github.com/emesix/ONT-S207CW-62TS-SE/issues/1)*
+
+## Hardware Specification
+
+| Feature | Value |
+|---|---|
+| **CPU** | RTL8372N |
+| **Flash** | GD25Q128E (16MB) |
+| **RAM** | Integrated in RTL8372N |
+| **RJ45 Ports** | 4x 2.5GBase-T (Ports 1-4) |
+| **SFP+ Ports** | 2x 10G (Ports 5-6) |
+| **Console** | UART (115200 baud for RTLPlayground, 9600 baud for stock) |
+| **Stock Web UI IP** | 192.168.2.1 |
+| **Loader Mode IP** | 192.168.10.247 |
+
+## Port Layout
+
+```
+┌─────────────────────────────────────────────┐
+│  ┌─────┐ ┌─────┐ ┌─────┐ ┌─────┐   ┌─────┐ ┌─────┐  │
+│  │RJ45 │ │RJ45 │ │RJ45 │ │RJ45 │   │SFP+ │ │SFP+ │  │
+│  │  1  │ │  2  │ │  3  │ │  4  │   │  5  │ │  6  │  │
+│  └─────┘ └─────┘ └─────┘ └─────┘   └─────┘ └─────┘  │
+│                                                     │
+│  [System LEDs]                                      │
+└─────────────────────────────────────────────┘
+```
+
+## LED Behavior
+
+### RJ45 Ports (Physical 1-4)
+
+| LED Color | Speed |
+|---|---|
+| **Green** | 2.5G |
+| **Orange** | 1G / 100M / 10M |
+| **Off** | No link |
+
+### SFP+ Ports (Physical 5-6)
+
+| LED Color | Speed |
+|---|---|
+| **Green** | 10G |
+| **Orange** | 2.5G / 1G |
+| **Off** | No link / No SFP module |
+
+## Port to Logical Mapping
+
+Custom mapping for ONT-S207CW-62TS-SE:
+
+| Physical Port | Logical Port | Type | LED Set |
+|---|---|---|---|
+| 1 | 7 | RJ45 | 2 |
+| 2 | 6 | RJ45 | 2 |
+| 3 | 5 | RJ45 | 0 |
+| 4 | 4 | RJ45 | 0 |
+| 5 | 3 | SFP+ (SDS0) | 3 |
+| 6 | 8 | SFP+ (SDS1) | 3 |
+
+**Note:** Ports 1-2 (RJ45) have reversed LED wiring and use LED-Set 2. SFP Ports 5-6 use LED-Set 3 to account for wiring differences.
+
+## Flashing Instructions
+
+See the [README.md](../../README.md) for general flashing instructions.
+
+## Stock Firmware Information
+
+| Property | Value |
+|---|---|
+| **Default IP** | 192.168.2.1 (ONT) / 192.168.10.247 (Loader Mode) |
+| **Default Login** | admin/admin (may vary by OEM) |
+| **Console Baud** | 9600 (stock) / 115200 (RTLPlayground) |
+| **CPU String** | "RTL8372N" |
+| **Loader Mode IP** | 192.168.10.247 |
+
+## Configuration Details
+
+- **CPU:** RTL8372N
+- **SFP:** SDS0 on logical port 3 (GPIO37), SDS1 on logical port 8 (GPIO38)
+- **Port Mapping:** Physical 1-4 → Logical 7-4, Physical 5-6 → Logical 3,8
+- **LED Wiring:** RJ45 Ports 1-2 and SFP Port 6 have reversed LED pins (orange/green swapped)
+- **LED Sets:** Set 0 for RJ45 Ports 3-4, Set 1 unused, Set 2 for RJ45 Ports 1-2, Set 3 for SFP Ports 5-6
+
+## Notes
+
+- ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS (unmanaged) are **RTL8372N-based** with **LAN ports mounted upside-down on the PCB**
+- Web UI shows correct physical port order (1-2-3-4 for RJ45, 5-6 for SFP)
+- Loader Mode always remains accessible at `192.168.10.247` for recovery
+- Serial console: 9600 baud (stock) → 115200 baud (RTLPlayground)
+
+## References
+
+- [GitHub Issue: emesix/ONT-S207CW-62TS-SE#1](https://github.com/emesix/ONT-S207CW-62TS-SE/issues/1) - Original photos and discussion
+- [PR: logicog/RTLPlayground#465](https://github.com/logicog/RTLPlayground/pull/465) - Feedback and improvements
@@ -29,6 +29,8 @@ The following devices have been tested and are fully working:
 | Mokerlink| 2G040210GSM     | Yes     | [2M-PCB43-V1.1](devices/2M-PCB43-V1.1.md)                                 |       | 4 + 2 |
 | Mokerlink| ZX-SWTGW218AS   | Yes     | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
 | MokerLink| POE-2G080110GS  | No      | [2M-PCB51-ML-V1.1](devices/2M-PCB51-ML-V1_1.md)                           | 4M    | 8 + 1 |
+| Binardat | 2G06-04210GSM    | No      | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md)                 | 0.5M  | 4 + 2 |
+| ONT      | ONT-S207CW-62TS-SE | No   | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md)                 | 0.5M  | 4 + 2 |
 | Netcore  | GS9             | No      | [PB-2132](devices/PB-2132.md)                                             | 4M    | 8 + 1 |
 | Ruiying  | RY-4GT-2SX      | No      | [FG-4GT-2SX_V2.0](devices/FG-4GT-2SX_V2.0.md)                             | 4M    | 4 + 2 |
 | Ruiying  | RY-8GT-1SX      | No      | [FG-8GT-1SX](devices/FG-8GT-1SX.md)                                       | 1M    | 8 + 1 |
@@ -935,6 +935,68 @@ __code const struct machine machine = {
            },
    };

+#elif defined MACHINE_ONT_S207CW_62TS_SE
+
+__code const struct machine machine = {
+    .machine_name = "ONT-S207CW-62TS-SE / Binardat 2G06-04210GSM / Binardat 2G06-04210GS",
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 2,
+    .log_to_phys_port = {0, 0, 0, 5, 4, 3, 2, 1, 6},
+    .phys_to_log_port = {7, 6, 5, 4, 3, 8, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
+
+    // SFP port on SDS0 / logical port 3
+    .sfp_port[0].pin_detect = GPIO37,
+    .sfp_port[0].pin_los = GPIO_NA,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 0,
+    .sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+    // SFP port on SDS1 / logical port 8
+    .sfp_port[1].pin_detect = GPIO38,
+    .sfp_port[1].pin_los = GPIO_NA,
+    .sfp_port[1].pin_tx_disable = GPIO_NA,
+    .sfp_port[1].sds = 1,
+    .sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+    .high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+    .port_led_set = { 0, 0, 0, 3, 0, 0, 2, 2, 3},
+    .mac_flash_offset = 0x1FC000,
+    .led_sets = {
+        { // RJ45 Ports 3-4 (normal wiring)
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+            0,
+            0
+        },
+        { // Unused
+            0,
+            0,
+            0,
+            0
+        },
+        { // RJ45 Ports 1-2 (reversed wiring)
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0,
+            0
+        },
+        { // SFP Ports 5-6
+            LEDS_10G | LEDS_LINK | LEDS_ACT,
+            LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT,
+            0,
+            0
+        },
+    },
+    .led_mux_custom = 1,
+    .led_mux = {
+        0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+    },
+};
+
 #elif defined MACHINE_SWTG024AS_A_2_0_1_5C_1SFP
 __code const struct machine machine = {
    .machine_name = "SWTG024AS-A-V2.0.1-5C-1SFP",
@@ -41,6 +41,7 @@
 // #define MACHINE_HI_K0801WS
 // #define MACHINE_FNS1200P
 // #define MACHINE_PCB_SWTG024AS_A_2_0_1
+// #define MACHINE_ONT_S207CW_62TS_SE
 // #define MACHINE_SWTG024AS_A_2_0_1_5C_1SFP
 // #define MACHINE_SWTG024AS_V2_0
 // #define MACHINE_FG_4GT_2SX_V2_0
@@ -24,149 +24,6 @@ extern __code const struct machine machine;

 extern __xdata uint8_t sfr_data[4];

-void leds_dump(void) __banked
-{
-	print_string("RTL837X_PIN_MUX_0: "); print_reg(RTL837X_PIN_MUX_0); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_IO_EN: "); print_reg(RTL837X_REG_LED_GLB_IO_EN); write_char('\n');
-	print_string("RTL837X_REG_LED1_0_SET0: "); print_reg(RTL837X_REG_LED1_0_SET0); write_char('\n');
-	print_string("RTL837X_REG_LED3_2_SET0: "); print_reg(RTL837X_REG_LED3_2_SET0); write_char('\n');
-	print_string("RTL837X_REG_LED1_0_SET1: "); print_reg(RTL837X_REG_LED1_0_SET1); write_char('\n');
-	print_string("RTL837X_REG_LED3_2_SET1: "); print_reg(RTL837X_REG_LED3_2_SET1); write_char('\n');
-	print_string("RTL837X_REG_LED1_0_SET2: "); print_reg(RTL837X_REG_LED1_0_SET2); write_char('\n');
-	print_string("RTL837X_REG_LED3_2_SET2: "); print_reg(RTL837X_REG_LED3_2_SET2); write_char('\n');
-	print_string("RTL837X_REG_LED1_0_SET3: "); print_reg(RTL837X_REG_LED1_0_SET3); write_char('\n');
-	print_string("RTL837X_REG_LED3_2_SET3: "); print_reg(RTL837X_REG_LED3_2_SET3); write_char('\n');
-	print_string("RTL837X_REG_LED3_0_SET1: "); print_reg(RTL837X_REG_LED3_0_SET1); write_char('\n');
-	print_string("RTL837X_REG_LED3_0_SET3: "); print_reg(RTL837X_REG_LED3_0_SET3); write_char('\n');
-	print_string("RTL837X_LED_PORT_SET_SEL: "); print_reg(RTL837X_LED_PORT_SET_SEL); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_MUX_1: "); print_reg(RTL837X_REG_LED_GLB_MUX_1); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_MUX_2: "); print_reg(RTL837X_REG_LED_GLB_MUX_2); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_MUX_3: "); print_reg(RTL837X_REG_LED_GLB_MUX_3); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_MUX_4: "); print_reg(RTL837X_REG_LED_GLB_MUX_4); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_MUX_5: "); print_reg(RTL837X_REG_LED_GLB_MUX_5); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_MUX_6: "); print_reg(RTL837X_REG_LED_GLB_MUX_6); write_char('\n');
-	print_string("RTL837X_REG_LED_GLB_ACTIVE: "); print_reg(RTL837X_REG_LED_GLB_ACTIVE); write_char('\n');
-	print_string("RTL837X_REG_LED_MODE: "); print_reg(RTL837X_REG_LED_MODE); write_char('\n');
-	print_string("LED pad Configuration:\n");
-	for (uint8_t i = 0; i < 28; i++) {
-		print_byte(i);
-		write_char(' ');
-	}
-	write_char('\n');
-	for (uint8_t i = 0; i < 28; i++) {
-		switch (i % 5) {
-		case 0:  // 0
-			reg_read_m(RTL837X_REG_LED_GLB_MUX_1 + (i / 5) * 4);
-			print_byte(sfr_data[3] & 0x3f);
-			break;
-		case 1:  // 6
-			print_byte(((sfr_data[3] >> 6) | (sfr_data[2] << 2)) & 0x3f);
-			break;
-		case 2:  // 12
-			print_byte(((sfr_data[1] << 4) | (sfr_data[2] >> 4)) & 0x3f);
-			break;
-		case 3:  // 18
-			print_byte((sfr_data[1] >> 2) & 0x3f);
-			break;
-		case 4:  // 24
-			print_byte(sfr_data[0] & 0x3f);
-			break;
-		}
-		write_char(' ');
-	}
-	write_char('\n');
-	print_string("LED-set Configuration:\n");
-	print_string("LED-ID\t\t0\t\t1\t\t2\t\t3\n");
-	for (__xdata uint8_t set = 0; set < 4; set++) {
-		print_string("SET "); write_char('0' + set); write_char(':');
-		for (__xdata uint8_t ledid = 0; ledid < 4; ledid++) {
-			print_string("\t   ");
-			uint8_t b;
-			if (set < 2) {
-				reg_read_m(RTL837X_REG_LED3_0_SET1);
-				b = sfr_data[3-((set << 1) + (ledid >> 1))];
-				print_byte(ledid & 1 ? b >> 4 : b & 0xf);
-			} else {
-				reg_read_m(RTL837X_REG_LED3_0_SET3);
-				b = sfr_data[3-(((set-2) << 1) + (ledid >> 1))];
-				print_byte(ledid & 1 ? b >> 4 : b & 0xf);
-			}
-			reg_read_m(RTL837X_REG_LED1_0_SET0 - set * 8 - ((ledid >> 1) * 4));
-			if (! (ledid & 1)) { // LEDID 0, 2
-				print_byte(sfr_data[2]); print_byte(sfr_data[3]);
-			} else {
-				print_byte(sfr_data[0]); print_byte(sfr_data[1]);
-			}
-		}
-		write_char('\n');
-	}
-	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
-		reg_read_m(RTL837X_LED_PORT_SET_SEL);
-		__xdata uint8_t set = sfr_data[3 - (i >> 2)];
-		set = (set >> ((i & 3) << 1));
-		print_string("Port "); write_char('0' + i); print_string(": SET ");
-		write_char('0' + set);
-		print_string(": ");
-		for (__xdata uint8_t ledid = 0; ledid < 4; ledid++) {
-			write_char('(');
-			reg_read_m(RTL837X_REG_LED1_0_SET0 - set * 8 - ((ledid >> 1) * 4));
-			if (ledid & 1) {  // LEDID 1, 3
-				sfr_data[2] = sfr_data[0];
-				sfr_data[3] = sfr_data[1];
-			}
-			if (sfr_data[3] & 0x01)
-				print_string(" 2G5");
-			if (sfr_data[3] & 0x02)
-				print_string(" TWO_1G");
-			if (sfr_data[3] & 0x04)
-				print_string(" 1G");
-			if (sfr_data[3] & 0x08)
-				print_string(" 500M");
-			if (sfr_data[3] & 0x10)
-				print_string(" 100M");
-			if (sfr_data[3] & 0x20)
-				print_string(" 10M");
-			if (sfr_data[3] & 0x40)
-				print_string(" LINK");
-			if (sfr_data[3] & 0x80)
-				print_string(" LINK_FLASH");
-			if (sfr_data[2] & 0x01)
-				print_string(" ACT");
-			if (sfr_data[2] & 0x02)
-				print_string(" RX");
-			if (sfr_data[2] & 0x04)
-				print_string(" TX");
-			if (sfr_data[2] & 0x08)
-				print_string(" COL");
-			if (sfr_data[2] & 0x10)
-				print_string(" DUPLEX");
-			if (sfr_data[2] & 0x20)
-				print_string(" TRAINING");
-			if (sfr_data[2] & 0x40)
-				print_string(" MASTER");
-			__xdata uint8_t b;
-			if (set < 2) {
-				reg_read_m(RTL837X_REG_LED3_0_SET1);
-				b = sfr_data[3-((set << 1) + (ledid >> 1))];
-			} else {
-				reg_read_m(RTL837X_REG_LED3_0_SET3);
-				b = sfr_data[3-(((set-2) << 1) + (ledid >> 1))];
-			}
-			b = ledid & 1 ? b >> 4 : b & 0xf;
-			if (b & 0x1)
-				print_string(" 10G");
-			if (b & 0x2)
-				print_string(" TWO_5G");
-			if (b & 0x4)
-				print_string(" 5G");
-			if (b & 0x8)
-				print_string(" TWO_2G5");
-			print_string("), ");
-		}
-		write_char('\n');
-	}
-}
-

 void leds_setup(void) __banked
 {
@@ -0,0 +1,155 @@
+#include <stdint.h>
+#include "rtl837x_common.h"
+#include "rtl837x_sfr.h"
+#include "rtl837x_regs.h"
+#include "rtl837x_leds.h"
+#include "machine.h"
+
+#pragma codeseg BANK3
+#pragma constseg BANK3
+
+extern __code const struct machine machine;
+extern __xdata uint8_t sfr_data[4];
+
+void leds_dump(void) __banked
+{
+	print_string("RTL837X_PIN_MUX_0: "); print_reg(RTL837X_PIN_MUX_0); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_IO_EN: "); print_reg(RTL837X_REG_LED_GLB_IO_EN); write_char('\n');
+	print_string("RTL837X_REG_LED1_0_SET0: "); print_reg(RTL837X_REG_LED1_0_SET0); write_char('\n');
+	print_string("RTL837X_REG_LED3_2_SET0: "); print_reg(RTL837X_REG_LED3_2_SET0); write_char('\n');
+	print_string("RTL837X_REG_LED1_0_SET1: "); print_reg(RTL837X_REG_LED1_0_SET1); write_char('\n');
+	print_string("RTL837X_REG_LED3_2_SET1: "); print_reg(RTL837X_REG_LED3_2_SET1); write_char('\n');
+	print_string("RTL837X_REG_LED1_0_SET2: "); print_reg(RTL837X_REG_LED1_0_SET2); write_char('\n');
+	print_string("RTL837X_REG_LED3_2_SET2: "); print_reg(RTL837X_REG_LED3_2_SET2); write_char('\n');
+	print_string("RTL837X_REG_LED1_0_SET3: "); print_reg(RTL837X_REG_LED1_0_SET3); write_char('\n');
+	print_string("RTL837X_REG_LED3_2_SET3: "); print_reg(RTL837X_REG_LED3_2_SET3); write_char('\n');
+	print_string("RTL837X_REG_LED3_0_SET1: "); print_reg(RTL837X_REG_LED3_0_SET1); write_char('\n');
+	print_string("RTL837X_REG_LED3_0_SET3: "); print_reg(RTL837X_REG_LED3_0_SET3); write_char('\n');
+	print_string("RTL837X_LED_PORT_SET_SEL: "); print_reg(RTL837X_LED_PORT_SET_SEL); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_MUX_1: "); print_reg(RTL837X_REG_LED_GLB_MUX_1); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_MUX_2: "); print_reg(RTL837X_REG_LED_GLB_MUX_2); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_MUX_3: "); print_reg(RTL837X_REG_LED_GLB_MUX_3); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_MUX_4: "); print_reg(RTL837X_REG_LED_GLB_MUX_4); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_MUX_5: "); print_reg(RTL837X_REG_LED_GLB_MUX_5); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_MUX_6: "); print_reg(RTL837X_REG_LED_GLB_MUX_6); write_char('\n');
+	print_string("RTL837X_REG_LED_GLB_ACTIVE: "); print_reg(RTL837X_REG_LED_GLB_ACTIVE); write_char('\n');
+	print_string("RTL837X_REG_LED_MODE: "); print_reg(RTL837X_REG_LED_MODE); write_char('\n');
+	print_string("LED pad Configuration:\n");
+	for (uint8_t i = 0; i < 28; i++) {
+		print_byte(i);
+		write_char(' ');
+	}
+	write_char('\n');
+	for (uint8_t i = 0; i < 28; i++) {
+		switch (i % 5) {
+		case 0:  // 0
+			reg_read_m(RTL837X_REG_LED_GLB_MUX_1 + (i / 5) * 4);
+			print_byte(sfr_data[3] & 0x3f);
+			break;
+		case 1:  // 6
+			print_byte(((sfr_data[3] >> 6) | (sfr_data[2] << 2)) & 0x3f);
+			break;
+		case 2:  // 12
+			print_byte(((sfr_data[1] << 4) | (sfr_data[2] >> 4)) & 0x3f);
+			break;
+		case 3:  // 18
+			print_byte((sfr_data[1] >> 2) & 0x3f);
+			break;
+		case 4:  // 24
+			print_byte(sfr_data[0] & 0x3f);
+			break;
+		}
+		write_char(' ');
+	}
+	write_char('\n');
+	print_string("LED-set Configuration:\n");
+	print_string("LED-ID\t\t0\t\t1\t\t2\t\t3\n");
+	for (__xdata uint8_t set = 0; set < 4; set++) {
+		print_string("SET "); write_char('0' + set); write_char(':');
+		for (__xdata uint8_t ledid = 0; ledid < 4; ledid++) {
+			print_string("\t   ");
+			uint8_t b;
+			if (set < 2) {
+				reg_read_m(RTL837X_REG_LED3_0_SET1);
+				b = sfr_data[3-((set << 1) + (ledid >> 1))];
+				print_byte(ledid & 1 ? b >> 4 : b & 0xf);
+			} else {
+				reg_read_m(RTL837X_REG_LED3_0_SET3);
+				b = sfr_data[3-(((set-2) << 1) + (ledid >> 1))];
+				print_byte(ledid & 1 ? b >> 4 : b & 0xf);
+			}
+			reg_read_m(RTL837X_REG_LED1_0_SET0 - set * 8 - ((ledid >> 1) * 4));
+			if (! (ledid & 1)) { // LEDID 0, 2
+				print_byte(sfr_data[2]); print_byte(sfr_data[3]);
+			} else {
+				print_byte(sfr_data[0]); print_byte(sfr_data[1]);
+			}
+		}
+		write_char('\n');
+	}
+	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+		reg_read_m(RTL837X_LED_PORT_SET_SEL);
+		__xdata uint8_t set = sfr_data[3 - (i >> 2)];
+		set = (set >> ((i & 3) << 1));
+		print_string("Port "); write_char('0' + i); print_string(": SET ");
+		write_char('0' + set);
+		print_string(": ");
+		for (__xdata uint8_t ledid = 0; ledid < 4; ledid++) {
+			write_char('(');
+			reg_read_m(RTL837X_REG_LED1_0_SET0 - set * 8 - ((ledid >> 1) * 4));
+			if (ledid & 1) {  // LEDID 1, 3
+				sfr_data[2] = sfr_data[0];
+				sfr_data[3] = sfr_data[1];
+			}
+			if (sfr_data[3] & 0x01)
+				print_string(" 2G5");
+			if (sfr_data[3] & 0x02)
+				print_string(" TWO_1G");
+			if (sfr_data[3] & 0x04)
+				print_string(" 1G");
+			if (sfr_data[3] & 0x08)
+				print_string(" 500M");
+			if (sfr_data[3] & 0x10)
+				print_string(" 100M");
+			if (sfr_data[3] & 0x20)
+				print_string(" 10M");
+			if (sfr_data[3] & 0x40)
+				print_string(" LINK");
+			if (sfr_data[3] & 0x80)
+				print_string(" LINK_FLASH");
+			if (sfr_data[2] & 0x01)
+				print_string(" ACT");
+			if (sfr_data[2] & 0x02)
+				print_string(" RX");
+			if (sfr_data[2] & 0x04)
+				print_string(" TX");
+			if (sfr_data[2] & 0x08)
+				print_string(" COL");
+			if (sfr_data[2] & 0x10)
+				print_string(" DUPLEX");
+			if (sfr_data[2] & 0x20)
+				print_string(" TRAINING");
+			if (sfr_data[2] & 0x40)
+				print_string(" MASTER");
+			__xdata uint8_t b;
+			if (set < 2) {
+				reg_read_m(RTL837X_REG_LED3_0_SET1);
+				b = sfr_data[3-((set << 1) + (ledid >> 1))];
+			} else {
+				reg_read_m(RTL837X_REG_LED3_0_SET3);
+				b = sfr_data[3-(((set-2) << 1) + (ledid >> 1))];
+			}
+			b = ledid & 1 ? b >> 4 : b & 0xf;
+			if (b & 0x1)
+				print_string(" 10G");
+			if (b & 0x2)
+				print_string(" TWO_5G");
+			if (b & 0x4)
+				print_string(" 5G");
+			if (b & 0x8)
+				print_string(" TWO_2G5");
+			print_string("), ");
+		}
+		write_char('\n');
+	}
+}
@@ -1752,8 +1752,6 @@ void main(void)
 	leds_setup();
 	machine_custom_init();

-	leds_dump();
-
 	set_sys_led_state(SYS_LED_SLOW);

 	if (machine_detected.isRTL8373)
Author	SHA1	Message	Date
René van Dorst	e67c928eb7	Merge pull request #465 from andreas5232/add-device-ONT-S207CW-62TS-SE add support for ONT-S207CW-62TS-SE and identical Binardat-2G06-04210GSM	2026-10-08 06:45:31 +00:00
Andreas Erhard	46f8ea8712	re-added struct comments again	2026-10-08 00:32:02 +02:00
Andreas Erhard	b0eab52a2e	applied feedback from review	2026-10-07 01:18:08 +02:00
Andreas Erhard	8ce062c349	resized images	2026-10-07 01:13:20 +02:00
Andreas Erhard	f768220a73	updated docs and removed duplicate picturs	2026-10-05 23:51:02 +02:00
René van Dorst	eab2e26510	Merge pull request #553 from DrDoof/cleanup/leds-dump-debug leds: move the LED register dump to BANK3 and behind a command	2026-10-05 17:43:11 +00:00
DrDoof	b0ed56d423	leds: move the LED register dump to BANK3 and behind a command leds_dump() printed the pin mux, the LED enables and every LED set on each boot, from BANK2. It now lives in its own file in BANK3, where there is room, and runs only on the new "leds" command, next to gpio and sds, so it stays at hand for bringing up a new board without costing BANK2 or boot output.	2026-10-05 08:22:19 +02:00
Andreas Erhard	fa632cdc6e	updated docs and corrected led mapping	2026-10-05 00:43:25 +02:00
Andreas Erhard	177fb76e1b	Merge branch 'main' into add-device-ONT-S207CW-62TS-SE	2026-10-04 23:45:20 +02:00
Andreas Erhard	24069439b0	reversed rj45 port order and optimized led config	2026-10-04 01:11:10 +02:00
Andreas Erhard	4117f549cc	Merge branch 'main' into add-device-ONT-S207CW-62TS-SE	2026-10-03 19:27:49 +02:00
Andreas Erhard	9733ff61a0	another almost working state. port order is wrong and leds are not correct, but ports are all working	2026-09-21 01:16:16 +02:00
Andreas Erhard	36459fdd76	Merge branch 'main' into add-device-ONT-S207CW-62TS-SE	2026-09-20 22:18:41 +02:00
Andreas Erhard	a4e3b4368b	extracted ONT-S207CW-62TS-SE into separate device	2026-09-18 22:16:06 +02:00
Andreas Erhard	c514eb8bf3	Merge branch 'logicog:main' into add-device-ONT-S207CW-62TS-SE	2026-09-17 23:33:30 +02:00
Andreas Erhard	575274786a	incorporated feedback from PR	2026-09-17 12:08:37 +02:00
Andreas Erhard	eb83b8be09	added support for ONT-S207CW-62TS-SE and identical Binardat-2G06-04210GSM	2026-09-17 00:18:46 +02:00