gitproxy/RTLPlayground
1
0 Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-10-29 17:54:14 +08:00
Code Issues Packages Projects Releases Wiki Activity

updated docs and removed duplicate picturs

Browse Source
This commit is contained in:
Andreas Erhard committed 2026-10-05 23:51:02 +02:00
1 parent fa632cdc6e
commit f768220a73
6 files changed
+11 -106
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

doc/devices/ONT-S207CW-62TS-SE.md
+9 -106
View File
@@ -8,10 +8,10 @@ ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS
- **Ports:** 4x 2.5G RJ45 + 2x 10G SFP+
- **Console:** 115200 baud (RTLPlayground firmware) / 9600 baud (stock firmware)
**Note:** These devices use **PCB-SWTG024AS-A-2.0.1** hardware. The `MACHINE_ONT_S207CW_62TS_SE` definition uses a **custom configuration** with:
**Note:** These devices are **RTL8372N-based** with **LAN ports mounted upside-down on the PCB**, requiring a custom configuration. The `MACHINE_ONT_S207CW_62TS_SE` definition uses a **custom configuration** with:
- Corrected port mapping (physical ports 1-4 = RJ45, 5-6 = SFP)
- Optimized LED sets for different port wiring (RJ45 Ports 1-2 have reversed LED wiring)
- Custom LED mux configuration from PCB-SWTG024AS-A-2.0.1
- Custom LED mux configuration
## Device Photos
@@ -72,91 +72,6 @@ ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS
| **Orange** | 2.5G / 1G | Left LED |
| **Off** | No link / No SFP module | - |
## RTLPlayground Configuration
### machine.h
```c
#define MACHINE_ONT_S207CW_62TS_SE
// ONT-S207CW-62TS-SE and Binardat 2G06-04210GSM
// RTL8372N, 4x2.5G RJ45 + 2x10G SFP+, GD25Q128E (16MB)
// Custom configuration with corrected port mapping and LED behavior
// Physical ports: 1-4 = RJ45, 5 = SFP (SDS0), 6 = SFP (SDS1)
// Logical ports: 3 = SFP (SDS0), 4-7 = RJ45, 8 = SFP (SDS1)
```
### machine.c Configuration
Custom configuration for ONT-S207CW-62TS-SE:
```c
#elif defined MACHINE_ONT_S207CW_62TS_SE
__code const struct machine machine = {
.machine_name = "ONT-S207CW-62TS-SE / Binardat 2G06-04210GSM",
.isRTL8373 = 0,
.mac_flash_offset = 0x1FC000,
.min_port = 3,
.max_port = 8,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 5, 4, 3, 2, 1, 6},
.phys_to_log_port = {7, 6, 5, 4, 3, 8, 0, 0, 0},
.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
// SFP port on SDS0 / logical port 3
.sfp_port[0].pin_detect = GPIO37,
.sfp_port[0].pin_los = GPIO_NA,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 0,
.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
// SFP port on SDS1 / logical port 8
.sfp_port[1].pin_detect = GPIO38,
.sfp_port[1].pin_los = GPIO_NA,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 1,
.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
.high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
.port_led_set = { 0, 0, 0, 3, 0, 0, 2, 2, 3},
.led_sets = {
{
// Set 0: RJ45 Ports 3-4 (normal wiring)
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
0
},
{
// Set 1: Unused
LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
},
{
// Set 2: RJ45 Ports 1-2 (reversed wiring)
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
LEDS_DUPLEX,
0
},
{
// Set 3: SFP Ports 5-6 (reversed wiring for Port 6)
LEDS_10G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT,
LEDS_2G5 | LEDS_LINK,
LEDS_COL | LEDS_DUPLEX
},
},
.led_mux_custom = 1,
.led_mux = {
0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,
0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
},
};
```
## Port to Logical Mapping
Custom mapping for ONT-S207CW-62TS-SE:
@@ -172,18 +87,6 @@ Custom mapping for ONT-S207CW-62TS-SE:
**Note:** Ports 1-2 (RJ45) have reversed LED wiring and use LED-Set 2. SFP Ports 5-6 use LED-Set 3 to account for wiring differences.
## Firmware Files
| File | Size | Purpose |
|---|---|---|
| `ONT_S207CW_62TS_SE-v22.bin` | 524288 bytes | Direct flash via CH341A/SPI programmer |
| `rtlplayground_oem_upgrade-ONT_S207CW_62TS_SE-v22.bin` | 540710 bytes | OEM upgrade via web UI (Loader Mode) |
### Firmware Size Check
- **Flash chip:** GD25Q128E = 16MB = 16777216 bytes
- **Firmware size:** 524288 bytes (512KB)
- **Status:** ✅ **Plenty of space available** - No size issues with old or new web UI
## Flashing Instructions
### Prerequisites
@@ -199,17 +102,17 @@ Custom mapping for ONT-S207CW-62TS-SE:
sudo apt install flashrom
# Flash the firmware (may need sudo)
flashrom -p ch341a_spi -c "GD25Q128E/GD25B128E/GD25R128E/GD25Q127C" -w ONT_S207CW_62TS_SE-v22.bin --noverify-all
flashrom -p ch341a_spi -c "GD25Q128E/GD25B128E/GD25R128E/GD25Q127C" -w firmware.bin --noverify-all
```
**Alternative command (if above fails):**
```bash
flashrom -p ch341a_spi -c "GD25Q128E" -w ONT_S207CW_62TS_SE-v22.bin
flashrom -p ch341a_spi -c "GD25Q128E" -w firmware.bin
```
### Via Loader Mode (Web UI Upgrade)
The OEM upgrade file can be flashed via the device's loader mode:
The firmware can be flashed via the device's loader mode:
1. **Enter Loader Mode:**
- Power off the switch
@@ -220,13 +123,13 @@ The OEM upgrade file can be flashed via the device's loader mode:
2. **Upload via HTTP:**
```bash
curl -T rtlplayground_oem_upgrade-ONT_S207CW_62TS_SE-v22.bin http://192.168.10.247/firmware
curl -T firmware.bin http://192.168.10.247/firmware
```
3. **Or via Web Browser:**
- Access `http://192.168.10.247`
- Use the firmware update function
- Upload `rtlplayground_oem_upgrade-ONT_S207CW_62TS_SE-v22.bin`
- Upload the firmware file
- Wait for completion and reboot
### Via RTLPlayground Web UI (After First Flash)
@@ -234,7 +137,7 @@ The OEM upgrade file can be flashed via the device's loader mode:
Once RTLPlayground firmware is running:
1. Access web interface at `http://192.168.2.1`
2. Navigate to **System > Firmware Update**
3. Upload the `.bin` file
3. Upload the firmware file
4. Wait for flash completion and reboot
## Recovery
@@ -278,7 +181,7 @@ If flashing fails and the switch does not boot:
## Notes
- ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS (unmanaged) use **identical PCB-SWTG024AS-A-2.0.1 hardware**
- ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), and Binardat 2G06-04210GS (unmanaged) are **RTL8372N-based** with **LAN ports mounted upside-down on the PCB**
- Web UI shows correct physical port order (1-2-3-4 for RJ45, 5-6 for SFP)
- Loader Mode always remains accessible at `192.168.10.247` for recovery
- Serial console: 9600 baud (stock) → 115200 baud (RTLPlayground)
doc/devices/photos/SWTG024AS-v2.0-unmanaged/binardat-2g06-04210gsm-back.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 554 KiB

doc/devices/photos/SWTG024AS-v2.0-unmanaged/binardat-2g06-04210gsm-front.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 616 KiB

doc/devices/photos/SWTG024AS-v2.0-unmanaged/binardat-2g06-04210gsm-pcb.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 804 KiB

machine.c
+1
View File
@@ -938,6 +938,7 @@ __code const struct machine machine = {
#elif defined MACHINE_ONT_S207CW_62TS_SE
// ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), Binardat 2G06-04210GS (unmanaged)
// RTL8372N, 4x2.5G RJ45 + 2x10G SFP+, GD25Q128E (16MB)
// LAN ports mounted upside-down on PCB
// Custom configuration with correct port order and LED colors
// Physical ports: 1-4 = RJ45, 5 = SFP (SDS0), 6 = SFP (SDS1)
// Logical ports: 3 = SFP (SDS0), 4-7 = RJ45, 8 = SFP (SDS1)
machine.h
+1
View File
@@ -44,6 +44,7 @@
#define MACHINE_ONT_S207CW_62TS_SE
// ONT-S207CW-62TS-SE, Binardat 2G06-04210GSM (managed), Binardat 2G06-04210GS (unmanaged)
// RTL8372N, 4x2.5G RJ45 + 2x10G SFP+, GD25Q128E (16MB)
// LAN ports mounted upside-down on PCB
// Physical ports: 1-4 = RJ45, 5-6 = SFP
// Custom configuration with correct port order and LED colors
// Logical ports: 3-8, Port 3 = SFP (SDS0), Ports 4-7 = RJ45, Port 8 = SFP (SDS1)