128 Commits
Author SHA1 Message Date
logicog 8abbececd1 Add device description for ZX310S-4T2XH 2026-04-24 10:53:05 +02:00
logicog d6dbf4e4dd Add photos of ZX310S-4T2XH 2026-04-24 10:53:05 +02:00
Brenda Streiff 97ae6bf1d3 Document the '2M-PCB23-V2.2' PCB
Sold as "keepLINK KP-9000-9XHML-X". This is different from the other, "V3.1"
version of the "keepLINK KP-9000-9XHML-X".
2026-04-04 11:40:03 -05:00
bennydiamond b64dfd8c25 Correction on IO mappings
Add further clarification on mapping assumptions
2026-03-27 20:56:09 -04:00
bennydiamond 5f1cd4cce0 Update documentation 2026-03-27 19:34:39 -04:00
bennydiamond 7ffd0c25c2 Support for PCB-SWTG115AS-V2.0
Marketed as Lianguo ZX-SWTGW215AS
2026-03-27 19:34:39 -04:00
René van Dorst ec5f655bba Merge pull request #180 from janh/k0501w-rename-version
Rename K0501W to include PCB version
2026-03-27 19:52:29 +00:00
logicog df498b0879 Merge pull request #173 from diijkstra/vlan_console
Console: Add Ingress type & VLAN show table
2026-03-26 21:02:33 +01:00
Jan Hoffmann 03422463e4 Rename K0501W to include PCB version
It seems very likely that other versions are not compatible, so make it
clear by including it in the machine type and name. Also update the
documentation.
2026-03-26 19:59:06 +01:00
Jan Hoffmann f331a6129a Add support for K0501W boards
This board appears for example in the Davuaz Da-K6501W switch, and is
designed similarly to Hi-K0402WS.

However, it only has one SFP port and another 2.5G copper port using
RTL8221B 2.5G PHY instead. Also, some components on the board, like
additional LEDs, mode switch, and second flash chip are not populated.

Like earlier revisions of the K0402W(S) board, there is no UART, so
debugging is limited.

As this is an unmanaged switch, installation needs a flash programmer.
2026-03-25 19:31:14 +01:00
diijkstra f7fcf0eda7 Console: Add Ingress type & VLAN show table
Added new `vlan show` command to dump current VLAN settings.
Supports printing PVID & ingress filtering per port.

Added new `ingress [p]<mode>` command to setup ingress filtering.
Added wrappers for enabling/disabling vlan filtering. Currently
not configurable, but state in console is read via ASIC registers.

Full VLAN dump & web support of new commands will be added later.
2026-03-21 12:29:26 +01:00
diijkstra b0370f7bb3 Doc: Describe how to upload firmware via CLI & HTTP
Rough explanation how to upload a new firmware. Probably, we should
support basic auth on upload for easier use, but lets document
what we have.
2026-03-21 12:22:36 +01:00
logicog d21d269d49 Merge pull request #152 from mmmspatz/mspatz/fix_vlan_page
Fix "Get Configuration" on vlan.html
2026-03-19 11:36:59 +01:00
logicog f1e5b7e31a Merge pull request #92 from vDorst/doc_gpio
doc: gpio overview and mux settings
2026-03-14 12:17:06 +01:00
diijkstra 95cbc1a2e0 TEG-S562: Correctly assign SFP
Looks like the SFP numbers are reversed, since GPIOs were mapped
to SFP numbers, the need to be reversed too. This fixes swapped
display of SFP stats on the webpage.
2026-03-13 23:36:29 +01:00
diijkstra 511d35f63d TEG-S562: Port LEDs
Added support for all leds on the device.

Stock port sets are slightly differently configured, where additional
LED0 on SET_0 and LED1&LED2 where configured for link/collisions/duplex.
This has not been reproduced as those lines are probably not connected
anywhere.
2026-03-13 21:40:34 +01:00
Mark H. Spatz 893dcd8fcf update vlan.md 2026-03-08 19:49:37 -04:00
logicog 04ab083652 Add documentation for bandwidth control 2026-03-08 19:04:48 +01:00
logicog dc16b25d62 Add support for the SWTG018AS-A V2.0 8+1 unmanged switch
The SWTG018AS-A V2.0 is an 8x2.5GBit/s port + 1 SFP+ port unmanged device
It is sold in an unbranded casing e.g. by Ampcom.
Hardware:
SoC: RTL8373N
Additional PHY: RTL8224
Flash: Puya P25D40SH (4MBit, slimmer, not standard SOP-8 package!)
LEDs: 1 Green + 1 Orange per Ethernet port (green designates 2.5GBit)
      1 Green LED for the SFP+ port

The photos already show a modified PCB: Unpopulated resistors R52 and R53
have been bridged in order to enable the serial console. The smaller flash
memory chip at U2 has been replaced with a Windbond 128MBit standard-sized
SOIC-8 chip in order to easily use SOIC clamps to flash the device. Also
the serial header has been populated.
2026-02-27 20:11:53 +01:00
logicog 70127018da Add device photos of KeepLink KP-9000-6XHML-X2 2026-02-25 18:07:54 +01:00
logicog 68a8a9ee92 Merge pull request #128 from vDorst/doc_mods_fix
docs: mods: Fix MiB numbers.
2026-02-23 07:46:54 +01:00
René van Dorst ff94e383aa docs: mods: Fix MiB numbers. 2026-02-14 19:35:18 +01:00
feelfree69 9f7e10fe7c Merge branch 'main' into swtgw218as 2026-02-14 19:22:17 +01:00
chriz 5e9f3324d5 Add photos keeplink KP-9000-6XH-X2 unmanaged. 2026-02-13 19:01:53 +01:00
feelfree69 f8c1ab4198 Add .md and photos 2026-02-12 21:56:37 +01:00
TylerDurden-23 8bd07ee649 Correct device name from Hi-KO4022WS to Hi-K0402WS 2026-02-11 22:34:55 +01:00
TylerDurden-23 3e1031b0f0 Highlight efficiency with 5V power supply
Emphasize the efficiency improvement with 5V power supply.
2026-02-11 22:33:59 +01:00
TylerDurden-23 9918a6267c Update documentation for Hi-KO4022WS switch
Added information about UART baud rate and installation method.
2026-02-11 22:33:02 +01:00
TylerDurden-23 bea162962e Correct model name in HI-K0402WS documentation 2026-02-11 22:32:37 +01:00
chriz a2ce5550fc Add documentation file. 2026-02-11 22:30:40 +01:00
René van Dorst 4a3cd7b73c Update Keeplink KP-9000-9XHML-X docs. 2026-02-11 19:19:38 +01:00
logicog eafe2e96e8 Merge pull request #113 from diijkstra/trendnet_limited
Partial TRENDNET TEG-S562 support
2026-02-07 16:58:32 +01:00
diijkstra 5391d3ec32 Partial TRENDNET TEG-S562 support
Mostly working, lacking LED initialization changes.
LEDs will be added later once #107 is merged.

Closes #76.
2026-02-04 18:25:07 +01:00
René van Dorst a0313eab87 doc: gpio overview and mux settings 2026-01-22 23:04:07 +01:00
chriz a528436572 Add HiSource HI-K0402WS pictures 2026-01-21 14:43:04 +01:00
logicog 4a615cb4bd Merge pull request #71 from vDorst/doc_mods
DOCS: Add modification page and flash replacement.
2026-01-15 07:43:33 +01:00
René van Dorst 7d04ea1980 doc: mods: Add note about command BBh.
All the listed parts, support `BBh` command.
2026-01-08 21:45:58 +01:00
René van Dorst 34d6024eeb DOCS: Add modification page and flash replacement.
Document modifications like flash replacement.
2026-01-08 21:35:40 +01:00
logicog e73d82ec33 Update Readme 2025-12-29 18:21:16 +01:00
René van Dorst 053c16b84e SWTG024AS: Document Slave Interface 2025-12-22 14:32:23 +01:00
René van Dorst 4e9fb19e05 SWTG024AS: more small changes 2025-12-20 20:36:41 +01:00
René van Dorst 0a0e1856ae SWTG024AS: Link to photo 2025-12-20 14:50:25 +01:00
René van Dorst cedd81cf00 SWTG024AS: Fix and use unit KiB, add missing managed flag. 2025-12-20 14:44:38 +01:00
René van Dorst 0779222194 SWTG024AS: Add Sodola SL-SWTG124AS-D
Info from #55.
2025-12-19 21:07:11 +01:00
René van Dorst 44ce073869 SWTG024AS: Add port overview, rename SDS to SerDes 2025-12-19 21:03:47 +01:00
logicog 6dfad825c0 Add IGMP documentation 2025-12-15 06:54:41 +01:00
logicog b1d5352214 Update LAG configuration registers 2025-12-14 20:35:17 +01:00
René van Dorst 0197c9b6cf Fixed to make SWGT024 V2.0 work 2025-12-14 11:49:38 +01:00
logicog 68405f70d2 Add lag show command 2025-12-06 23:38:41 +01:00
logicog b82b957750 Add LAG documentation 2025-12-05 07:38:16 +01:00