Update docuementation and PCB photos

doc/devices/HASIVO_S1100WP_8GT_1SX_SE.md

@@ -67,4 +67,9 @@ Copper ports use LED SET0, the SFP port uses LED SET1.
 
 ### PoE
 
-The 8 copper ports support PoE (power input DC 52V 2.5A). PoE is not configurable via RTLPlayground, and no `struct poe_port` telemetry is configured for this machine.
+The 8 copper ports support PoE powered by a DC 52V 2.5A input. Power management is handled by two HS104PTI chipsets over I2C (GPIO47_I2C_SDA0, GPIO46_I2C_SCL0):
+
+* Chip 1 (I2C address 0x1A): 2.5G Ports 1–4
+* Chip 2 (I2C address 0x2A): 2.5G Ports 5–8
+
+Note: The current implementation does not yet support PoE management. Consequently, PoE currently operates in standalone mode without software control.

machine.c

@@ -1345,15 +1345,15 @@ __code const struct machine machine = {
 	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
 	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
 	.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green LED (right)
-					0, // unused
+					0,
 					LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber LED (left)
 					0
-				  }, // unused
+				  },
 				  { LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED
-					0, // unused
-					0, // unused
+					0, 
+					0,
 					0
-				  }, // unused		    	},
+				  },
 				},
 };
 #elif defined MACHINE_F7008_2_5