mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-08-30 14:52:51 +08:00
d00f
7ec0286d69
Bring the Spanning Tree page in line with a typical managed switch's per-port panel. Configuration gains the full-range path cost (raw 0..200000000, 0 = auto, replacing the old 1000x-scaled byte), a point-to-point admin control (auto/on/off), and the priority is now a 0..240 step-16 dropdown. A new status table shows, per port, the Port State, Role, Designated Bridge / Port ID / Cost (learned from received BPDUs, kept per port and aged via the BPDU age), Operational Edge and Operational Point-to-Point. The designated fields fall back to presenting this switch as the segment's designated bridge when no fresh BPDU has been heard (so a quiet port shows our own bridge-id, as the vendor UIs do). /stp.json carries the packed hex fields plus our own MAC for that fallback. Space: reclaim BANK2 for the above by moving rtl837x_pins to HOME and compacting leds_dump into a register-address table (~800B); bandwidth returns to BANK1. No BANK3 - hardware-verified that PSBANK > 2 crashes this SoC at boot (a bricked unit and an SPI-programmer recovery earlier today); a warning to that effect is now in rtl837x_lldp.c. Hardware-verified: cost 200000000 and p2p off round-trip through the CLI and JSON, the status table populates correctly with STP enabled (all ports Forwarding/Designated, oper-edge and oper-p2p True), LACP 3f/3f and the LAN unaffected. (cherry picked from commit 2ec62072f061dc9e78bc821ba1c297cb6819e206)
59 lines
2.9 KiB
C
59 lines
2.9 KiB
C
#ifndef _RTL837X_STP_H_
|
|
#define _RTL837X_STP_H_
|
|
|
|
#include <stdint.h>
|
|
void stp_in(void) __banked;
|
|
void stp_setup(void) __banked;
|
|
void stp_timers(void) __banked;
|
|
void stp_off(void) __banked;
|
|
void stp_parse(void) __banked __reentrant; /* "stp ..." CLI handler (cmd_parser delegates here) */
|
|
void stp_defaults(void) __banked; /* boot init: 802.1D/w default configuration */
|
|
|
|
/* Bridge identifier as carried in a BPDU (priority, extension, MAC). */
|
|
struct bridge {
|
|
uint8_t prio;
|
|
uint8_t ext;
|
|
uint8_t mac[6];
|
|
};
|
|
|
|
/* ---- Configuration (defaults per 802.1D-2004/802.1w, set in stp_defaults) --- */
|
|
extern __xdata uint8_t stpEnabled;
|
|
extern __xdata uint8_t stp_prio; /* bridge priority, high byte: 0x80 = 32768; CLI takes 0-15 (steps of 4096) */
|
|
extern __xdata uint8_t stp_hello_s; /* hello time, 1-10 s (default 2) */
|
|
extern __xdata uint8_t stp_maxage_s; /* max age, 6-40 s (default 20) */
|
|
extern __xdata uint8_t stp_fwddelay_s; /* forward delay, 4-30 s (default 15); our listen period */
|
|
extern __xdata uint8_t stp_rstp; /* 1 = RSTP BPDUs (v2), 0 = STP-compatible Config BPDUs (v0) */
|
|
extern __xdata uint8_t stp_txhold;
|
|
extern __xdata uint8_t stp_failsafe_s; /* mgmt watchdog, seconds (0 = off) */
|
|
extern __xdata uint8_t stp_failsafe_tripped; /* max BPDUs per port per second (default 6) */
|
|
|
|
/* Per-port config/status flags (stp_pflags[]) */
|
|
#define STP_PF_ENABLED 0x01 /* port participates in STP (default on) */
|
|
#define STP_PF_ADMEDGE 0x02 /* admin edge: forwarding immediately */
|
|
#define STP_PF_AUTOEDGE 0x04 /* auto edge: forward after 3 s without BPDU */
|
|
#define STP_PF_BPDUGUARD 0x08 /* disable port if a BPDU arrives */
|
|
#define STP_PF_ROOTGUARD 0x10 /* never accept a better root on this port */
|
|
#define STP_PF_FILTER 0x20 /* neither send nor accept BPDUs */
|
|
#define STP_PF_OPEREDGE 0x40 /* runtime: port went forwarding as an edge */
|
|
#define STP_PF_TRIPPED 0x80 /* runtime: disabled by BPDU guard */
|
|
|
|
extern __xdata uint8_t stp_pflags[10];
|
|
extern __xdata uint32_t stp_pcost[10]; /* path cost; 0 = auto (20000) */
|
|
extern __xdata uint8_t stp_pprio[10];
|
|
extern __xdata uint8_t stp_pp2p[10]; /* admin point-to-point: 0 auto, 1 on, 2 off */
|
|
|
|
/* Last-heard designated info per port (from received BPDUs); consult
|
|
* stp_bpdu_age to decide whether it is still current. */
|
|
extern __xdata struct bridge stp_dbridge[10];
|
|
extern __xdata uint16_t stp_dpid[10];
|
|
extern __xdata uint32_t stp_dcost[10];
|
|
extern __xdata uint16_t stp_bpdu_age[10]; /* ticks since a BPDU was heard */ /* port priority (default 0x80) */
|
|
|
|
/* ---- Status, exposed read-only for the web UI (send_stp) ---- */
|
|
extern __xdata struct bridge root_bridge;
|
|
extern __xdata uint32_t root_bridge_cost; /* our path cost to the root (0 if we are root) */
|
|
extern __xdata uint8_t stp_root_port; /* logical port towards the root; 0xff = we are root */
|
|
extern __xdata uint16_t stp_tc_count; /* topology change counter (diagnostics) */
|
|
|
|
#endif
|