mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
Matt Merhar
4963fbe50a
UART is broken out to the unpopulated switch header at the front of the board. This isn't quite the same as the V2.0 definition as the system led is always on, not routed through the CPU. Additionally, document that the newer revision of the same "YS25-0402" is supported via the existing PCB-K0402WS-V3.0 target.
58 lines
1.7 KiB
C
58 lines
1.7 KiB
C
#include "machine_defs.h"
|
|
|
|
__code const struct machine machine = {
|
|
.machine_name = MACHINE_MODEL,
|
|
.isRTL8373 = 0,
|
|
.min_port = 3,
|
|
.max_port = 8,
|
|
.n_sfp = 2,
|
|
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
|
|
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
|
|
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
|
|
|
|
/* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
|
|
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
|
|
.sfp_port[0].pin_los = GPIO37,
|
|
.sfp_port[0].pin_tx_disable = GPIO_NA,
|
|
.sfp_port[0].sds = 1,
|
|
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
|
|
|
|
/* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
|
|
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
|
|
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
|
|
.sfp_port[1].pin_tx_disable = GPIO_NA,
|
|
.sfp_port[1].sds = 0,
|
|
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
|
|
|
|
.reset_pin = GPIO_NA,
|
|
|
|
/* These don't appear to be populated / wired-up; the power LED is always on */
|
|
.high_leds = { 0 },
|
|
|
|
/* Copper ports use SET0; SFP ports use SET1 */
|
|
.port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},
|
|
|
|
.led_sets = {
|
|
{ /* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
|
|
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
|
|
0,
|
|
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
|
|
0
|
|
},
|
|
{ /* SET1: SFP — all speeds link/act */
|
|
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
|
|
0,
|
|
0,
|
|
0
|
|
},
|
|
},
|
|
|
|
.led_mux_custom = 1,
|
|
.led_mux = {
|
|
0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, /* GPIO0-7: unused */
|
|
0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, /* GPIO8-14 */
|
|
0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, /* GPIO15-20 */
|
|
0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23 /* GPIO21-27 */
|
|
},
|
|
};
|