mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-08-30 14:52:51 +08:00
88 lines
2.5 KiB
Markdown
88 lines
2.5 KiB
Markdown
# Keeplink KP-9000-6XH-X2 / KP-9000-6XHML-X2
|
||
|
||
Following is documentation for switches marked as `KP-9000-6XH-X2` or
|
||
`KP-9000-6XHML-X2`.
|
||
|
||
Using SPI clamp in-board is the only method for initial installation.
|
||
|
||
### Label specifications
|
||
|
||
- **Name**: 4X 2.5G RJ45 Port + 2 X 10G SFP+ Port
|
||
- **Model**: KP-9000-6XH-X2 / KP-9000-6XHML-X2
|
||
- **Ports**:
|
||
- 4 × RJ45: 10/100/1000/2500 Mbps
|
||
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
|
||
|
||
### Machine target
|
||
|
||
These devices exist with different PCB revisions. Select the machine target by
|
||
the PCB silkscreen, not only by the label on the case.
|
||
|
||
| PCB silkscreen | Known labels | Recommended machine target | Legacy target |
|
||
| --- | --- | --- | --- |
|
||
| `2M-PCB43-V1.2` | `KP-9000-6XHML-X2` | `MACHINE_KP_9000_6XHML_X2_V1_2` | `MACHINE_KP_9000_6XHML_X2` |
|
||
| `2M-PCB43-V2.1` | `KP-9000-6XH-X2`, `KP-9000-6XHML-X2` | `MACHINE_KP_9000_6XH_X2_V2_1` or `MACHINE_KP_9000_6XHML_X2_V2_1` | `MACHINE_KP_9000_6XH_X2` |
|
||
|
||
The V1.2 and V2.1 boards use different GPIO, SFP, port and LED mappings.
|
||
The unmanaged and managed labels are firmware/SKU differences and do not by
|
||
themselves identify the PCB wiring.
|
||
|
||
### What works
|
||
|
||
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
|
||
- SFP port with 10G modules
|
||
- LEDs
|
||
- untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
|
||
|
||
### Hardware overview: 2M-PCB43-V2.1
|
||
|
||
Front side:
|
||
|
||
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-front.jpg" width="600" />
|
||
|
||
Label:
|
||
|
||
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-label.jpg" width="600" />
|
||
|
||
|
||
|
||
### PCB overview
|
||
|
||
**Board markings**
|
||
- Top silkscreen: 2M-PCB43-V2.1
|
||
|
||
Top side
|
||
|
||
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-top.jpg" width="600" />
|
||
|
||
Bottom
|
||
|
||
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-bottom.jpg" width="600" />
|
||
|
||
### Hardware overview: 2M-PCB43-V1.2
|
||
|
||
The V1.2 board has been seen in managed `KP-9000-6XHML-X2` devices.
|
||
|
||
Label:
|
||
|
||
<img src="photos/KP-9000-6XHML-X2/label.jpg" width="600" />
|
||
|
||
Top side:
|
||
|
||
<img src="photos/KP-9000-6XHML-X2/pcb_top.jpg" width="600" />
|
||
|
||
Bottom:
|
||
|
||
<img src="photos/KP-9000-6XHML-X2/pcb_bottom.jpg" width="600" />
|
||
|
||
## Reset Button
|
||
|
||
There's an unpopulated Reset button on the front left side of the PCB.
|
||
It can easily be soldered, you'll need an 4.5mmx4.5mm 90° button switch with a 3-pin footprint.
|
||
I got mine here: https://de.aliexpress.com/item/1005007295346702.html
|
||
The front case has already the hole in the metal case, you just have to punch a hole through the foil.
|
||
|
||
## Power supply
|
||
|
||
Input power is delivered via barell plug, `12V 1A` adapter was provided.
|