mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
64 lines
2.8 KiB
Markdown
64 lines
2.8 KiB
Markdown
# Change Log
|
|
|
|
## [0.x] - 2026-xx-XX
|
|
|
|
## Added
|
|
|
|
- Devices
|
|
- Support the hongyavision HYWS-SGT0204S (PCB marking `2G5F4_10G2_V1.01`), an
|
|
RTL8372 based 4x2.5G + 2xSFP+ unmanaged switch with a 512 KB Bright Moon
|
|
`T25S40` flash. It is a sibling of the KP-9000-6XH-X2 (2M-PCB43-V1.1) with
|
|
the two SFP+ cages wired the other way round (physical 5 is on SDS1,
|
|
physical 6 on SDS0), no reset button fitted, wrong silkscreen labels on the
|
|
serial header, `LED_GLB_IO_EN` bit 6 has to be set for the port LEDs to
|
|
work, and the fitted T25S40 cannot be read in DIO mode on this board, so the
|
|
target selects single-IO flash reads (`flash_sio`). New machine target
|
|
`MACHINE_2G5F4_10G2_V1_01`, see `doc/devices/2G5F4_10G2_V1.01.md`.
|
|
|
|
- Web UI
|
|
- Compress the embedded assets (minify + gzip) and switch to a single-page layout. #315
|
|
- Replace the multi-page UI with a themed single-page app: light, dark and Selenized themes following the browser by default,
|
|
English, Japanese and Chinese, save to flash merges the command log into the startup config and verifies the write,
|
|
firmware images are checked in the browser before upload. #429
|
|
|
|
## Changed
|
|
|
|
## Fixed
|
|
|
|
- Time
|
|
- `rtl8372_init()` sets SDS 0 to SGMII as the stock firmware does. The masks were 0, so on RTL8372
|
|
boards without 10G ports both SerDes stayed off, and with SDS 0 off `RTL837X_REG_SEC_COUNTER`
|
|
does not hold a written value: NTP never retried after a failed first attempt at boot and
|
|
froze the clock after a sync.
|
|
|
|
- Web UI
|
|
- Firefox no longer fills a saved login into the new admin password fields. It also put the
|
|
user name into the NTP poll interval, which marked the Time card as edited, so it kept its
|
|
defaults (NTP off, no server, UTC-12:00) instead of the switch's settings.
|
|
- Accept firmware uploads regardless of the file part's MIME type, including
|
|
`application/macbinary` sent by Chrome on macOS for `.bin` files.
|
|
|
|
- Health
|
|
- `HEALTH=1` builds no longer write past the phase timing arrays at the LLDP checkpoint, which
|
|
corrupted the `link` slow counter and the DHCP client state. #658
|
|
- Config
|
|
- A startup configuration line longer than the command buffer no longer stops the replay:
|
|
the offending line is skipped and the following lines are still applied.
|
|
- The web UI and the configuration upload now refuse a line the replay cannot take,
|
|
instead of writing it to flash.
|
|
|
|
## Breaking changes
|
|
|
|
- Config
|
|
- VLAN don't accept port `u`-suffix anymore.
|
|
So `vlan 1 4u` is not valid anymore.
|
|
Replace it with `vlan 1 4`.
|
|
- Commands
|
|
- port zero/`0` is treated as the `CPU_PORT`. #326
|
|
- Many commands don't accept the CPU_PORT anymore. See #334.
|
|
When the CPU_PORT is needed, the command/service will add the CPU_PORT automaticly.
|
|
Only `isolate` accept the CPU_PORT as destination port.
|
|
|
|
## [v0.1_aplha] - 2025-11-03
|
|
|
|
First release. |