gitproxy/RTLPlayground
1
0 Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-10-29 17:54:14 +08:00
Code Issues Packages Projects Releases Wiki Activity
Files
2d0abbbca02a7978ea47b232ce4a7637e4299100
RTLPlayground/CHANGELOG.md
T
Andre Brait 7d7585fa6d fix(health): give the LLDP phase a valid slot in the phase arrays 
In HEALTH=1 builds health_phase(HEALTH_LLDP) used id 7 while ph_max[] and
ph_slow[] had HEALTH_PHASES = 6 entries. The LLDP checkpoint therefore
wrote one byte past ph_max (into the high byte of ph_slow[0]) and, when
the phase took two ticks or more, incremented two bytes past ph_slow
(dhcp_state.state and transaction_id on KP_9000_6XHML_X2).

Rename it HEALTH_PH_LLDP = 6, derive HEALTH_PHASES from it so the arrays
always cover the last phase, print an lldp line in "health" and document
it.

Fixes #658
2026-10-22 11:32:05 +02:00

2.1 KiB
Raw Blame History

Change Log

[0.x] - 2026-xx-XX

Added

  • Devices

    • Support the hongyavision HYWS-SGT0204S (PCB marking 2G5F4_10G2_V1.01), an RTL8372 based 4x2.5G + 2xSFP+ unmanaged switch with a 512 KB Bright Moon T25S40 flash. It is a sibling of the KP-9000-6XH-X2 (2M-PCB43-V1.1) with the two SFP+ cages wired the other way round (physical 5 is on SDS1, physical 6 on SDS0), no reset button fitted, wrong silkscreen labels on the serial header, LED_GLB_IO_EN bit 6 has to be set for the port LEDs to work, and the fitted T25S40 cannot be read in DIO mode on this board, so the target selects single-IO flash reads (flash_sio). New machine target MACHINE_2G5F4_10G2_V1_01, see doc/devices/2G5F4_10G2_V1.01.md.

  • Web UI

    • Compress the embedded assets (minify + gzip) and switch to a single-page layout. #315
    • Replace the multi-page UI with a themed single-page app: light, dark and Selenized themes following the browser by default, English, Japanese and Chinese, save to flash merges the command log into the startup config and verifies the write, firmware images are checked in the browser before upload. #429

Changed

Fixed

  • Health
    • HEALTH=1 builds no longer write past the phase timing arrays at the LLDP checkpoint, which corrupted the link slow counter and the DHCP client state. #658
  • Config
    • A startup configuration line longer than the command buffer no longer stops the replay: the offending line is skipped and the following lines are still applied.
    • The web UI and the configuration upload now refuse a line the replay cannot take, instead of writing it to flash.

Breaking changes

  • Config
    • VLAN don't accept port u-suffix anymore. So vlan 1 4u is not valid anymore. Replace it with vlan 1 4.
  • Commands
    • port zero/0 is treated as the CPU_PORT. #326
    • Many commands don't accept the CPU_PORT anymore. See #334. When the CPU_PORT is needed, the command/service will add the CPU_PORT automaticly. Only isolate accept the CPU_PORT as destination port.

[v0.1_aplha] - 2025-11-03

First release.

Reference in new issue View Git Blame Copy Permalink