mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
37 lines
1.2 KiB
Markdown
37 lines
1.2 KiB
Markdown
### HG0402XG V1.1
|
||
|
||
## Brands
|
||
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|
||
|---|---|---|---|---|---|
|
||
| ZoeRax | HG0402XG | No| HG0402XG V1.1 | 1M (Winbond 25Q) | |
|
||
|
||
### Label specifications
|
||
|
||
- **Name**: ZOERAX 2.5G 2SFP 4-Port Gigabit Switch
|
||
- **Model**: HG0402XG-EU
|
||
- **Ports**:
|
||
- 4 × RJ45: 10/100/1000/2500 Mbps
|
||
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
|
||
<img src="photos/HG0402XG_V1_1/HG0402XG_V1_1_bottom.jpg" width="300" />
|
||
|
||
## PCB
|
||
|
||
<img src="photos/HG0402XG_V1_1/HG0402XG_V1_1_top.jpg" width="300" />
|
||
<img src="photos/HG0402XG_V1_1/HG0402XG_V1_1_bottom.jpg" width="300" />
|
||
|
||
Be aware that the UART header is metric, the pitch is 2mm. The JST PH2.0mm header shown was addeded after purchase
|
||
|
||
The slider switch controls microcontroller U4 in order to configure the VLAN on/off settings. U4 can reset the SoC
|
||
and also write into its registers to configure VLAN. With RTLPlayground the slider cannot be used for anything else
|
||
than triggering reset. Any change in the position will trigger this reset.
|
||
|
||
### Installation
|
||
|
||
Using SPI clamp on-board is the only method for initial installation.
|
||
|
||
### What works
|
||
|
||
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
|
||
- SFP ports with various 1G/10G Fiber and Ethernet modules
|
||
- LEDs
|