mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
robs
0da6318777
Firefox filled a saved login into the System tab's password fields and its user name into the NTP poll interval, the input before them. That input event marked the Time card as edited, so ntpLoad() left NTP off, the server empty and the time zone at UTC-12:00.
58 lines
2.5 KiB
Markdown
58 lines
2.5 KiB
Markdown
# Change Log
|
|
|
|
## [0.x] - 2026-xx-XX
|
|
|
|
## Added
|
|
|
|
- Devices
|
|
- Support the hongyavision HYWS-SGT0204S (PCB marking `2G5F4_10G2_V1.01`), an
|
|
RTL8372 based 4x2.5G + 2xSFP+ unmanaged switch with a 512 KB Bright Moon
|
|
`T25S40` flash. It is a sibling of the KP-9000-6XH-X2 (2M-PCB43-V1.1) with
|
|
the two SFP+ cages wired the other way round (physical 5 is on SDS1,
|
|
physical 6 on SDS0), no reset button fitted, wrong silkscreen labels on the
|
|
serial header, `LED_GLB_IO_EN` bit 6 has to be set for the port LEDs to
|
|
work, and the fitted T25S40 cannot be read in DIO mode on this board, so the
|
|
target selects single-IO flash reads (`flash_sio`). New machine target
|
|
`MACHINE_2G5F4_10G2_V1_01`, see `doc/devices/2G5F4_10G2_V1.01.md`.
|
|
|
|
- Web UI
|
|
- Compress the embedded assets (minify + gzip) and switch to a single-page layout. #315
|
|
- Replace the multi-page UI with a themed single-page app: light, dark and Selenized themes following the browser by default,
|
|
English, Japanese and Chinese, save to flash merges the command log into the startup config and verifies the write,
|
|
firmware images are checked in the browser before upload. #429
|
|
|
|
## Changed
|
|
|
|
## Fixed
|
|
|
|
- Web UI
|
|
- Firefox no longer fills a saved login into the new admin password fields. It also put the
|
|
user name into the NTP poll interval, which marked the Time card as edited, so it kept its
|
|
defaults (NTP off, no server, UTC-12:00) instead of the switch's settings.
|
|
- Accept firmware uploads regardless of the file part's MIME type, including
|
|
`application/macbinary` sent by Chrome on macOS for `.bin` files.
|
|
|
|
- Health
|
|
- `HEALTH=1` builds no longer write past the phase timing arrays at the LLDP checkpoint, which
|
|
corrupted the `link` slow counter and the DHCP client state. #658
|
|
- Config
|
|
- A startup configuration line longer than the command buffer no longer stops the replay:
|
|
the offending line is skipped and the following lines are still applied.
|
|
- The web UI and the configuration upload now refuse a line the replay cannot take,
|
|
instead of writing it to flash.
|
|
|
|
## Breaking changes
|
|
|
|
- Config
|
|
- VLAN don't accept port `u`-suffix anymore.
|
|
So `vlan 1 4u` is not valid anymore.
|
|
Replace it with `vlan 1 4`.
|
|
- Commands
|
|
- port zero/`0` is treated as the `CPU_PORT`. #326
|
|
- Many commands don't accept the CPU_PORT anymore. See #334.
|
|
When the CPU_PORT is needed, the command/service will add the CPU_PORT automaticly.
|
|
Only `isolate` accept the CPU_PORT as destination port.
|
|
|
|
## [v0.1_aplha] - 2025-11-03
|
|
|
|
First release. |