mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
48 lines
1.4 KiB
Markdown
48 lines
1.4 KiB
Markdown
### SWTG024AS-V2.1
|
||
|
||
## Brands
|
||
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|
||
|---|---|---|---|---|---|
|
||
| Xikestor | SKS3200-4E2X | Yes | PCB-SWTG024AS-V2.1.0_19023 | 25Q16A | 8372N |
|
||
| Solola | SL902-SWTG024AS | Yes | PCB-SWTG024AS-V2.1.0_19023 | | 8372N |
|
||
|
||
### Label specifications
|
||
|
||
- **Ports**:
|
||
- 4 × RJ45: 10/100/1000/2500 Mbps
|
||
- 2 × SFP+: 1000/2500/10000 Mbps
|
||
- **Power**: 1A @ 12V DC
|
||
|
||
#### Xikestore SKS-3200-4E2X label
|
||
<img src="photos/SWTG024AS-V2.1.0/label.jpg" width="300" />
|
||
|
||
### What works
|
||
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
|
||
- The SFP+ ports supports 1G, 2.5G and 10G modules.
|
||
- LEDs work with the same indiciations as the OEM firmware.
|
||
|
||
### PCB overview
|
||
|
||
**Board markings**
|
||
- Top silkscreen: PCB-SWTG024AS-V2.1.0
|
||
|
||
Top side
|
||
|
||
<img src="photos/SWTG024AS-V2.1.0/pcb-top.jpg" width="300" />
|
||
|
||
Bottom
|
||
|
||
<img src="photos/SWTG024AS-V2.1.0/pcb-bottom.jpg" width="300" />
|
||
|
||
### Serial console
|
||
|
||
The four-pin through-hole serial header can be seen to the right of the CPU heatsink in the photo above. It is labelled J1, with pin 1 (Indicated by a triangle on the silkscren) at the bottom. the pinout is also on the silkscreen:
|
||
|
||
| Pin | Label |
|
||
|-----|--------|
|
||
| 1 | TX |
|
||
| 2 | RX |
|
||
| 3 | GND |
|
||
| 4 | 3V3 |
|
||
|
||
Adding a header is a few moments work with a soldering iron. Only pins 1-3 are required for serial port use, and the stock firmware outputs at 57600bps at boot. |