mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
Sylwester Petela
c69bf4c5ec
Support For Goalake IG108 and Netcore GS9 based on same PCB = PB-2132 SFP port untested
54 lines
1.2 KiB
Markdown
54 lines
1.2 KiB
Markdown
# IG108
|
|
|
|
Following is documentation for unmanaged switch marked as `IG108`.
|
|
|
|
Original software is running UART on 9600 baud rate.
|
|
|
|
Using SPI clamp in-board is the only method for initial installation.
|
|
|
|
### Brands
|
|
|
|
| Brand | Type | Managed | PCB | Flash | Chip RTL |
|
|
|---------|------------|---------|------------|-------------|---------------|
|
|
| Goalake | IG108 | No | PB-2132 | cFeon Q32A | 8373N + 8224N |
|
|
| Netcore | GS9 | No | PB-2132 | cFeon Q32A | 8373N + 8224N |
|
|
|
|
### What works
|
|
|
|
- All eight 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
|
|
- SFP port with 1G/2.5G/10G modules
|
|
- LEDs
|
|
|
|
### PCB overview
|
|
|
|
**Board markings**
|
|
|
|
- Top silkscreen: PB-2132
|
|
|
|
Front Goalake:
|
|
|
|
<img src="photos/PB-2132/case.jpg" width="600" />
|
|
|
|
Label Goalake:
|
|
|
|
<img src="photos/PB-2132/label.jpg" width="600" />
|
|
|
|
Top side:
|
|
|
|
<img src="photos/PB-2132/PCB-top.jpg" width="600" />
|
|
|
|
Bottom:
|
|
|
|
<img src="photos/PB-2132/PCB-bottom.jpg" width="600" />
|
|
|
|
### Serial console
|
|
|
|
The PCB has unpopulated through-holes near the SFP Port, with description of each pin, works out of the box.
|
|
|
|
- **Settings**: 115200 baud / 8N1 / 3.3V TTL
|
|
|
|
### Power supply
|
|
|
|
Input power is delivered via barell plug, `12V 1A` adapter was provided.
|
|
|