* add MACHINE_SWTG024AS_A_2_0_1_5_RJ45
* fix(machine): update SFP port LED color descriptions for PCB-SWTG024AS V2.0
* add(doc): create a simple documentation for SWTG024AS-A-V2.0.1_5_RJ45
* refactor(machine): update machine definition
The ZX310S-4T2XT is a managed device with 2x2.5GBit and 2x10GBit Ethernet.
It is sold, among others, by Horaco as an unbranded device.
CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV (U3)
PHY 2x RTL8261BE
I recently brought a "Ztyuav Z-QWYT0402", the insides looked identical to the
existing supported "Hisource Hi-K0402WS". Both of them have the
"PCB-K0402-V3.0" silkscreen.
I flashed the vanilla image and it seems to work great.
I changed the documentation to be more inclusive of other devices (including
adding a picture of mine). I suspect more devices might fall into this
"PCB-K0402-V3.0" bucket, for example the "YuanLey YS25-0402" with
the vlan switch also looks suspiciously identical from the outside.
I also added some details I noticed while flashing mine:
teardown, flash padding, how the selector switch actually works.
Adds CLI reference for the previously undocumented vlan <id> mgmt
command, including the disable case (vlan 0 mgmt), default state,
and a lockout warning.
Fixes#235
- machine.c/h: add MACHINE_FNS1200P with verified GPIO assignments for
both SFP ports, LED SET0 (amber 2.5G / green 1G-100M-10M) and SET1
(SFP all-speeds), led_mux from original firmware register dump, and
machine_custom_init() enabling LED_GLB_IO_EN bit 6
- doc/devices/FNS-1200P.md: device overview, port layout, serial
console (S1 three through-holes = UART0 115200 8N1 3.3V),
LED and SFP GPIO tables
- doc/devices/photos/FNS-1200P/: chassis front panel and PCB top photos
- doc/supported_devices.md: add FNS-1200P to the list
GPIO assignments and LED register values were cross-checked between
live GPIO observation (RTLPlayground gpio command) and an original
firmware register dump.
* Revise compiling section and add cautionary notes
Updated compiling instructions and added warnings about flashing procedures.
* Refactor caution messages in README.md
Updated caution messages to use new formatting for emphasis.
* Revise caution and reminder notes in README
Updated caution and reminder sections for clarity and consistency.
* Fix typos in README regarding firmware update
Corrected typo errors in the README.
* Add image for advanced settings
Add advanced_seetings.png
* Add advanced settings configuration details to README
Added advanced settings section with configuration instructions.
* Fix image source in README for advanced settings
Corrected the image source filename for advanced settings.
* Revise IP and port command descriptions in README
Updated command descriptions in README for clarity.
* Revise README.md for clarity and updated instructions
Updated sections in README.md for clarity and accuracy, including compiling requirements, installation instructions, and cautionary notes.
* Revise README for clarity and emphasis
Updated formatting and emphasized important notes in the README.
* Correct image file name and compilation output in README
Updated README to reflect changes in image file names and compilation output.
It seems very likely that other versions are not compatible, so make it
clear by including it in the machine type and name. Also update the
documentation.
Priit Laes
ZYT
Lynn-Becky
logicog
Your Name
René van Dorst
Ron
th0m4sek
HL Yi
feelfree69
logicog
Alexandru M Stan
Erdnusschokolade
Taiga Ogawa
feelfree69
dobodu
Mark Captur
Brenda Streiff
bennydiamond
Jan Hoffmann