it'll accept just the definition.
Also throughout the regex we have over-specified the number of digits
sometimes ports are 4 digits long, sometimes they are 2. This seems
unnecessary, 1 or more is sufficient
the user clicks apply on the specific vlan. In order for this to
work when the user is simultaneously changing the vlan that their
machine is connected through and the mgmt vlan id, we need to be
able to send a batch of commands through to the switch atomically
so the switch can process all of them and the momentary disconnection
of the machine doesn't matter
When adding a new VLAN, we should load it after addition
Prevent deleting the mgmt vlan
Adding a button to promote a vlan to be the management VLAN
We can't create a vlan called d or mgmt as that clashes with the
commands to delete and promote a vlan
Making the Management VLAN more obvious and adding a "confused"
disabled button to where delete and promote are
Switching to the i image and making it so you can click the entire
row apart from the cell where the buttons are (to prevent accidents)
Cleaning up the last bits of ingress filtering I can see
Also making the first VLAN in the table load when we load the UI
Removing the tickbox for the PVID, I'll swap this out to ticks
or something later on, but the PVID will be automatically set
based on the untagged membership, otherwise it will be 1
Send the vlan with name command when attempting to add a new VLAN
Because of the structure of the vlan command, we need to send the name as well if its set
Set the PVID based on the untagged membership and reload the
table when applied. We need to block setting the PVID to the tagged by proxy
Blue button
Need to provide array of pvid commands not concat
Storing state of each vlan so we can refer later
Blue button
the bits we need
But we need both main and branch checked out and the action can
do it for us
Pulling the bank occupancy from the map produced by sdcc rather
than the output of the build as it appears the output number is
only the maximum size of the banks
BANK0 isn't output, but what I'm guessing are the consituents for it are
Needed to increase buffer size for this to send app.js
The logical port status is what is returned in the array, for
non-sequential systems we need to map through physToLog rather
than just subtracting 1
physToLog is 1 based! not 0; also fixing up typecasts
Reimplementing using an array of objects to represent ports.
The previous approach of a bitmask of logical ports, was just too
simple on devices such as the SWGT024_V2_0_MANAGED which has
gaps in the port assignments.
timing with ticks
Fixing up the log_to_phys_port assignment
2000 is about every 10 seconds, so scaling up to once every 30ish
Removing the attempt to block lldp frames,
This does not work however the hard work has been done for us in
the #514 so we can borrow that work later on
boot_to_html outputs 1 and 0 not true and false, making the sim match
the real implementation.
lldp.json has a hanging , in the array; so overwriting it
Moving the global on/off onto the LLDP page
Building a table of LLDP status from the S ports. Later on, if
we wish to implement an lldp receiver we can display the remote
details here
Adding support to the cmd parser for the lldp commands
to each port once every 30 seconds.
* Additionally fixes the on-ward passing of LLDP frames through
the switch
The ports on the case are marked 1-8 so this should reflect that
rather than being 0-based
We can send the hostname as well, this can be dynamically allocated
Let's send the model as the system description as well
Rob Emery