machine_custom_init() runs once at boot, but its code and any tables it
uses were compiled into machine.c and so into the common bank. On the
SWTG018AS-V2.1.0 variant, whose init carries a 21-entry LED register
table, that overflows bank 0 by 0x66 bytes and main no longer links for
MACHINE_PCB_SWTG018AS_V2_1_0; any machine whose init grows can hit the
same wall. SDCC segment pragmas apply file-wide, so the hooks move to a
new machine_init.c compiled into BANK2, and the prototype becomes
banked. machine_check also compiles the new file per machine so the
hooks keep CI syntax coverage.
CONFIG_UPLOAD_BUF at 2560 capped a configuration upload at about 2.2K
while the config sector holds 4K. Size the buffer as CONFIG_LEN plus
room for the multipart framing so the whole sector is usable.
config_take() wrote the payload without checking it against the sector:
safe before only because the buffer could not hold an oversized one.
Reject a payload that does not fit CONFIG_LEN, terminator included,
instead of writing past the erased sector.
send_config() streams a configuration larger than the TCP output buffer
through the cont_addr/cont_len continuation, but set cont_addr to the
offset within the config instead of a flash address, so the tail was read
from code space. The file server sets cont_addr absolute; do the same by
adding CONFIG_START.
The bug was unreachable while CONFIG_UPLOAD_BUF capped uploads below
TCP_OUTBUF_SIZE, but a stored config near the full sector exposes it.
Saving the configuration works in Chrome and fails in Firefox, and the
difference is only how each browser splits the request. The handler
erased the config sector as soon as the request started and then parsed
the multipart body one TCP segment at a time, which requires every
boundary and every part header to fall inside a single segment. Firefox
splits inside a part header, so the parser lost its place and the
erased sector was left holding a truncated body or nothing at all. A
single-burst scripted post lost the whole body the same way.
The configuration is limited to two kilobytes, so the whole request body
now accumulates in xdata and is parsed only after the closing boundary
has arrived. The parts are walked in one pass, the part carrying a
filename is written to a freshly erased sector, and the client receives
a 200 instead of the previous silent close. No segmentation can confuse
this, since the parser only ever sees a complete body.
Locating the closing boundary first also bounds the walk over the parts,
since none can lie beyond it, so the length of the buffer is no longer
the bound and the test for the two trailing dashes is unnecessary.
The walk matches at offsets inside a buffer that is not terminated, so
neither existing helper fits: strcmp() goes on to compare the byte after
the match and is_word_x() demands a separator there. Add strstart() and
strstart_x() for that case, and use strlen_x() for the boundary length.
The firmware upload path still streams, since a megabyte cannot be
buffered, and is untouched.
The single-digit arm of the ingress parser guards with p - '1' > 9,
which no digit can satisfy: the largest, '9', gives 8. The digit that
needed rejecting is '0', which gives -1 and indexes one byte before
phys_to_log_port, so "ingress 0 t" reads out of bounds and applies the
ingress mode to whatever port number that byte happens to contain.
Ports are 1-based, so reject anything below '1'; values above '9' are
already excluded by the isnumber check before this.
The MAC table listing tests bit 0 of byte 2 of the third table data
word for the static flag, but the flag lives in bit 0 of byte 1: an
entry written with byte 1 bit 0 set survives the aging engine
indefinitely where an identical entry without it ages out, and reads
back with exactly that bit set through both the address and the
next-entry read methods. Byte 2 of that word reads zero for learned and
static entries alike, so every entry has always been listed as learned
and a static entry has never been visible as such in the table listing.
The SWTGW218AS label covers more than one PCB. On boards with the
SWTG018AS-V2.1.0 silkscreen the SFP module-detect is GPIO38 (no LOS pin
wired) and the LED block is wired differently, including a bi-color SFP
LED (green up to 2.5G, blue at 10G) that the LED-set encoding cannot
express. With the existing MACHINE_SWTGW218AS definition these boards
never detect an SFP module, so an SFP-uplinked switch comes up with no
working uplink.
Add the variant as its own machine define named by the PCB marking,
leaving MACHINE_SWTGW218AS unchanged for boards that match its wiring.
The LED register values are taken from the stock firmware; the PIN_MUX_0
write routes the blue-LED pin to the LED controller, without which no
LED register value can drive it. PIN_MUX_1/2 stay untouched so SFP
detect and i2c remain GPIOs.
Typing or pasting a line of 128 characters or more into the CLI hangs the
editor and overruns cmd_buffer[128]: the length check did not reserve room
for the terminating NUL written on Enter, and on a full buffer the character
was retried via continue without advancing the serial-ring read pointer at
the bottom of the loop, so input processing never caught up again.
Cap the line at CMD_BUF_SIZE-1 and, when full, drop the character but fall
through to consume the ring byte instead of spinning on it. The functional
change is three lines; the rest of the diff is re-indentation of the
insert-and-echo block (git diff -w shows the minimal form).
Adds an optional per-board mac_flash_offset. When non-zero, RTLPlayground
reads a 6-byte MAC from that flash address and uses it if it is a valid
globally-administered unicast address; otherwise it falls back to the
generated locally-administered MAC. Offset 0 (default for every board)
preserves current behaviour.
Enable it for the SWTGW218AS, whose stock firmware keeps the factory MAC
in nvcfg at 0x1FC000. RTLPlayground images and web upgrades only touch
flash below that region, so the factory MAC survives flashing.
Send the configured hostname on discover and request so the DHCP server
can register the device (e.g. in local DNS). Skipped while the hostname
is still empty, i.e. before set_hostname_default() has run.
Honor SOURCE_DATE_EPOCH, falling back to the HEAD commit date and then
to wall-clock when git is absent. Same-commit builds become
byte-identical (BUILD_DATE is baked into the image and covered by the
trailing CRC), which makes it possible to verify that a binary matches
a source tree.
SDCC rejects memset() on the generic &entry pointer (error 78,
incompatible types). The ipmc/l2mc table entries are __xdata; pass an
explicit (__xdata uint8_t *) so the call resolves.
bloqaudio