* add MACHINE_SWTG024AS_A_2_0_1_5_RJ45
* fix(machine): update SFP port LED color descriptions for PCB-SWTG024AS V2.0
* add(doc): create a simple documentation for SWTG024AS-A-V2.0.1_5_RJ45
* refactor(machine): update machine definition
The ZX310S-4T2XT is a managed device with 2x2.5GBit and 2x10GBit Ethernet.
It is sold, among others, by Horaco as an unbranded device.
CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV (U3)
PHY 2x RTL8261BE
I recently brought a "Ztyuav Z-QWYT0402", the insides looked identical to the
existing supported "Hisource Hi-K0402WS". Both of them have the
"PCB-K0402-V3.0" silkscreen.
I flashed the vanilla image and it seems to work great.
I changed the documentation to be more inclusive of other devices (including
adding a picture of mine). I suspect more devices might fall into this
"PCB-K0402-V3.0" bucket, for example the "YuanLey YS25-0402" with
the vlan switch also looks suspiciously identical from the outside.
I also added some details I noticed while flashing mine:
teardown, flash padding, how the selector switch actually works.
Adds CLI reference for the previously undocumented vlan <id> mgmt
command, including the disable case (vlan 0 mgmt), default state,
and a lockout warning.
Fixes#235
- machine.c/h: add MACHINE_FNS1200P with verified GPIO assignments for
both SFP ports, LED SET0 (amber 2.5G / green 1G-100M-10M) and SET1
(SFP all-speeds), led_mux from original firmware register dump, and
machine_custom_init() enabling LED_GLB_IO_EN bit 6
- doc/devices/FNS-1200P.md: device overview, port layout, serial
console (S1 three through-holes = UART0 115200 8N1 3.3V),
LED and SFP GPIO tables
- doc/devices/photos/FNS-1200P/: chassis front panel and PCB top photos
- doc/supported_devices.md: add FNS-1200P to the list
GPIO assignments and LED register values were cross-checked between
live GPIO observation (RTLPlayground gpio command) and an original
firmware register dump.
* Revise compiling section and add cautionary notes
Updated compiling instructions and added warnings about flashing procedures.
* Refactor caution messages in README.md
Updated caution messages to use new formatting for emphasis.
* Revise caution and reminder notes in README
Updated caution and reminder sections for clarity and consistency.
* Fix typos in README regarding firmware update
Corrected typo errors in the README.
* Add image for advanced settings
Add advanced_seetings.png
* Add advanced settings configuration details to README
Added advanced settings section with configuration instructions.
* Fix image source in README for advanced settings
Corrected the image source filename for advanced settings.
* Revise IP and port command descriptions in README
Updated command descriptions in README for clarity.
* Revise README.md for clarity and updated instructions
Updated sections in README.md for clarity and accuracy, including compiling requirements, installation instructions, and cautionary notes.
* Revise README for clarity and emphasis
Updated formatting and emphasized important notes in the README.
* Correct image file name and compilation output in README
Updated README to reflect changes in image file names and compilation output.
Priit Laes
ZYT
Lynn-Becky
logicog
Your Name
René van Dorst
Ron
th0m4sek
HL Yi
feelfree69
logicog
Alexandru M Stan
Erdnusschokolade
Taiga Ogawa
feelfree69
dobodu
Mark Captur
Brenda Streiff
bennydiamond