machine: add keepLink KP-9000-9XHML-X V3.2 (2M-PCB23-V3.2)

The V3.2 board has the same component placement as V3.1 and works with
its machine definition: RJ45 links at 2.5G, LEDs, SFP detection with DOM
readings at 10G, factory MAC at 0x1FC000 and the reset button. The new
target only reports "V3.2" as the machine name.

Installed from the original firmware V100.9.25 through its web
interface with the OEM installer image. Reading the flash in-circuit with
a SOIC-8 clip gave the chip ID EF FF FF, as on a V3.1 board.

Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
This commit is contained in:
Brunoz78andClaude Opus 5.5 committed 2026-10-03 17:10:01 +02:00
1 parent 6e69f5bba3
commit b71239f394
4 files changed
+44 -1

No files matched your search

+1
View File
@@ -22,6 +22,7 @@ The following devices have been tested and are fully working:
| Keeplink | KP-9000-6XH-X2 / KP-9000-6XHML-X2 | No/Yes | [2M-PCB43-V1.2 / V2.1](devices/KP-9000-6XH-X2.md) | | 4 + 2 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V2.2](devices/2M-PCB23-V2_2.md) | 2M | 8 + 1 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V3.1](devices/2M-PCB23-V3_1.md) | 2M | 8 + 1 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V3.2](devices/2M-PCB23-V3_2.md) | 2M | 8 + 1 |
| LIANGUO | SWTG024AS | No | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md) | 0.5M | 4 + 2 |
| Lianguo | ZX-SWTGW215AS | Yes | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md) | 2M | 5 + 1 |
| Lianguo | HYWS-SGT0108S | No | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md) | 0.5M | 8 + 1 |