Merge pull request #435 from bennydiamond/Support_HYWS-SGT0108S

Support for Lianguo HYWS-SGT0108S 8 + 1 unmanaged

doc/devices/HYWS-SGT0108S.md

@@ -0,0 +1,64 @@
+# Lianguo HYWS-SGT0108S
+
+Following is documentation for unmanaged switch marked as `HYWS-SGT0108S`.
+
+Original software is running UART on 9600 baud rate. Output is very minimal.
+
+Using SPI clamp in-board is the only method for initial installation and update.
+
+Stock flash chip is 512KB in size. Consider replacing for update through Web UI.
+
+- Header for uart is clearly identified.
+- The red LED act as a powered-on LED.
+- There is no SYS LED.
+- There is a footprint for a Reset button. Unpopulated. Unclear if routed back to RTL8373.
+
+### Label specifications
+
+- **Name**: 2.5G Ethernet Switch 8+1
+- **Model**: HYWS-SGT0108S
+- **Ports**:  
+  - 8 × RJ45: 10/100/1000/2500 Mbps  
+  - 1 × SFP: 1000 / 2500 / 10000 Mbps  
+
+### What works
+
+- All eight 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps  
+- SFP port supporting 1G, 2.5G and 10G modules 
+- RJ45 LEDs (Blue+White)
+- SFP Single LED (Blue)
+
+### Assembled unit
+
+Top side
+
+<img src="photos/HYWS-SGT0108S-unmanaged\Assembled-top.jpg" width="300" />
+
+Front
+
+<img src="photos/HYWS-SGT0108S-unmanaged\Assembled-front.jpg" width="300" />
+
+Bottom
+
+<img src="photos/HYWS-SGT0108S-unmanaged\Assembled-bottom.jpg" width="300" />
+
+### PCB overview
+
+**Board markings**  
+- Top silkscreen: 2G5F_20G_V1.01 / 2023-09-28  
+
+Top side
+
+<img src="photos/HYWS-SGT0108S-unmanaged\PCB-top.jpg" width="300" />
+
+Bottom
+
+<img src="photos/HYWS-SGT0108S-unmanaged\PCB-bot.jpg" width="300" />
+
+Original SPI Flash Chip
+
+<img src="photos/HYWS-SGT0108S-unmanaged\og_spi_flash.jpg" width="300" />
+
+## Power supply
+
+Input power is delivered via barell plug, `12V 1A` adapter was provided.

doc/supported_devices.md

@@ -33,6 +33,7 @@ The following devices have been tested and are fully working:
 | Xikestore| SKS3200M-4GPY2XF| Yes     | [SWTG024AS-v1.0](devices/SWTG024AS.md)                                    |       | 4 + 2 |
 | XikeStor | SKS3200-8E1X    | Yes     | [SWTG118AS-V2.1-17462](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
 | Ztyuav   | Z-QWYT0402      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |
+| Lianguo  | HYWS-SGT0108S   | No      | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md)                                | 0.5M  | 8 + 1 |
 
 For KP-9000-6XH-X2 / KP-9000-6XHML-X2 / Mokerlink 2G040210GSM devices, select
 the machine target by PCB revision. The ML/non-ML or managed/unmanaged label

machine.c

@@ -1145,6 +1145,43 @@ __code const struct machine machine = {
 	},
 };
 
+#elif defined MACHINE_LIANGUO_HYWS_SGT0108S
+__code const struct machine machine = {
+    .machine_name = "Lianguo HYWS-SGT0108S",
+    .isRTL8373 = 1,
+    .min_port = 0,
+    .max_port = 8,
+    .n_sfp = 1,
+    .log_to_phys_port = {2, 1, 4, 3, 5, 6, 7, 8, 9},
+    .phys_to_log_port = {1, 0, 3, 2, 4, 5, 6, 7, 8},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = {
+        .sda = GPIO39_I2C_SDA4,
+        .scl = GPIO40_I2C_SCL3_MDC1
+    },
+
+    .reset_pin = GPIO_NA,
+	.high_leds = { .mux = 0, .enable = 0 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
+	.led_sets = { 
+		{ 
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // RJ45 Blue LEDs
+			LEDS_2G5 | LEDS_LINK, // RJ45 White LEDs
+			0,
+			0
+		},
+		{ 
+			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // SFP blue LED?
+			0,
+			0,
+			0
+		},
+	},
 #elif defined MACHINE_POE_2G080110GS
 __code const struct machine machine = {
 	.machine_name = "MokerLink POE-2G080110GS",