port, dhcp: drop the called/done traces from the console and syslog

rtl837x_port.c prints "called" and "done" around mirroring, PVID, VLAN
and L2 setup, and dhcp.c around discover, request, start and stop. They
land on the console on every boot and config replay, and in the log
once syslog is running. The VLAN line keeps the VLAN, members and
tagged values, only without the function name in front.

On the KP_9000_6XHML_X2 this takes 359 bytes out of BANK1, 88 out of
BANK2 and 24 out of BANK3. BANK1 goes from 431 to 790 bytes free.

dhcp.c

@@ -157,7 +157,6 @@ void dhcp_addopt_server_id(void)
 
 void dhcp_send_discover(void)
 {
-	print_string("dhcp_send_discover called\n");
 	dhcp_prepare_request();
 
 	dhcp_state.opt_ptr = 0;
@@ -193,7 +192,6 @@ void dhcp_send_discover(void)
 
 void dhcp_send_request(void)
 {
-	print_string("dhcp_send_request called\n");
 	dhcp_prepare_request();
 
 	dhcp_state.opt_ptr = 0;
@@ -376,13 +374,11 @@ void dhcp_start(void) __banked
 	*tid++ = SFR_DATA_8;
 	*tid = SFR_DATA_0;
 	dhcp_state.state = DHCP_START;
-	print_string("dhcp_start done\n");
 }
 
 
 void dhcp_stop(void) __banked
 {
-	print_string("dhcp_stop called\n");
 	uip_udp_remove(dhcp_state.conn);
 	dhcp_state.state = DHCP_OFF;
 }

rtl837x_port.c

@@ -40,7 +40,6 @@ static void wait_table_ready(void)
 
 void port_mirror_set(uint8_t port, __xdata uint16_t rx_pmask, __xdata uint16_t tx_pmask) __banked
 {
-	print_string("\nport_mirror_set called \n");
 	print_string("Mirroring port: "); print_byte(port); print_string(" with rx-mask: ");
 	print_short(rx_pmask); print_string(", tx mask: "); print_short(tx_pmask);
 	write_char('\n');
@@ -52,7 +51,6 @@ void port_mirror_set(uint8_t port, __xdata uint16_t rx_pmask, __xdata uint16_t t
 
 void port_mirror_del(void) __banked
 {
-	print_string("\nport_mirror_del called \n");
 	REG_SET(RTL837x_MIRROR_CTRL, 0);
 }
 
@@ -112,7 +110,6 @@ void port_pvid_set(uint8_t port, __xdata uint16_t pvid) __banked
 {
 	uint8_t lag = port_lag_of(port);
 
-	print_string("\nport_pvid_set called \n");
 	if (lag == PORT_LAG_NONE) {
 		port_pvid_write(port, pvid);
 		return;
@@ -141,7 +138,6 @@ void vlan_delete(uint16_t vlan) __banked
 	if (!vlan || vlan >= 0xfff)
 		return;
 
-	print_string("\nvlan_delete called \n"); print_short(vlan);
 	vlan_name_remove(vlan);
 	REG_WRITE(RTL837x_TBL_DATA_IN_A, 0, 0, 0, 0);
 	REG_WRITE(RTL837X_TBL_CTRL, vlan >> 8, vlan, TBL_VLAN, TBL_WRITE | TBL_EXECUTE);
@@ -232,7 +228,7 @@ void vlan_create(void) __banked
 	vlan_settings.members |= 0x0200; // Set 10th bit
 	vlan_settings.tagged |= 0x0200;
 
-	print_string("\nvlan_create called\nvlan: "); print_short(vlan_settings.vlan);
+	print_string("vlan: "); print_short(vlan_settings.vlan);
 	print_string(", members: "); print_short(vlan_settings.members);
 	print_string(", tagged: "); print_short(vlan_settings.tagged); write_char('\n');
 
@@ -250,7 +246,6 @@ void vlan_create(void) __banked
 
 	wait_table_ready();
 
-	print_string("vlan_create done \n");
 }
 
 
@@ -263,7 +258,6 @@ void vlan_create(void) __banked
  */
 void vlan_setup(void) __banked
 {
-	print_string("\nvlan_setup called \n");
 
 	// No VLAN names set up so far
 	vlan_ptr = 0;
@@ -331,7 +325,6 @@ void vlan_setup(void) __banked
 	print_string("\nvlan_setup, REG 0x4f4c: "); print_reg(0x4f4c);
 #endif
 
-	print_string("vlan_setup done \n");
 }
 
 
@@ -354,7 +347,6 @@ void port_l2_forget_port(uint8_t port) __banked
  */
 uint8_t port_l2_forget(void) __banked
 {
-	print_string("\nport_l2_forget called\n");
 	// Configure the entries to be flushed:
 	// port-based (bits 0-1 are 0 and dynamic entries, bit 2 specifies dynamic entries
 	REG_SET(RTL837x_L2_TBL_FLUSH_CNF, 0x0);
@@ -370,7 +362,6 @@ uint8_t port_l2_forget(void) __banked
 		reg_read_m(RTL837x_L2_TBL_FLUSH_CTRL);
 	} while (sfr_data[1]);
 
-	print_string("port_l2_forget done\n");
 	return 0;
 }
 
@@ -465,7 +456,6 @@ void port_l2mc_set(uint8_t mac_last, __xdata uint16_t vid, __xdata uint16_t pmas
  */
 void port_l2_setup(void) __banked
 {
-	print_string("\nport_l2_setup called\n");
 
 	port_l2_forget();
 
@@ -483,7 +473,6 @@ void port_l2_setup(void) __banked
 	// When maximim entries learned, then simply flood the packet
 	reg_bit_set(RTL837X_L2_LRN_PORT_CONSTRT_ACT, 0);
 
-	print_string("\nport_l2_setup done\n");
 }