Add basic support for MokerLink POE-2G080110GS

doc/devices/2M-PCB51-ML-V1_1.md

@@ -0,0 +1,32 @@
+# MokerLink POE-2G080110GS
+
+The `POE-2G080110GS` is an unmanaged 8x2.5G RJ45 and 1xSFP+ PoE switch sold by Mokerlink. There is also a `POE-2G080110GSM` managed version of the switch which may be similar but this has not been verified on actual hardware.
+
+## Brands
+| Brand  | Type             |Managed| PCB              | Flash           | Chip RTL      |
+|--------|------------------|-------|------------------|-----------------|---------------|
+| Mokerlink | POE-2G080110GS | No | 2M-PCB51-ML-V1.1 | 4MB (W25Q32JV) | 8373N + 8224N |
+
+## Hardware overview
+Front
+
+<img src="photos/POE-2G080110GS/POE-2G080110GS-front.jpg" width="300" />
+
+Label
+
+<img src="photos/POE-2G080110GS/POE-2G080110GS-label.jpg" width="300" />
+
+The stock firmware from a POE-2G080110GS device had a sha256sum of `4c280853465eaad80e1772075c0f2d29c11fb8c561547f06353d3a5443c388e9`.
+
+### PCB
+
+Top silkscreen is marked `2M-PCB51-ML-V1.1`. PoE is provided by RTL8238C. Flash chip is 4 MB Winbond 25Q32JV (U8).
+
+<img src="photos/POE-2G080110GS/POE-2G080110GS-pcb.jpg" width="300" />
+
+> [!CAUTION]
+> This device operates on mains voltage, which can be a dangerous or potentially lethal hazard. Even after the device is unplugged, high-voltage capacitors can remain charged afterward and may still shock you. Do not attempt to open/disassemble a mains powered device unless you understand how to do so safely. Also, opening the device may void your warranty.
+
+## Notes
+
+The stock firmware blinks both the 2.5G and 1G LEDs on activity, despite the front of the device indicating that each LED should be independent. The `POE_2G080110GS` machine config behaves as the front of the device indicates (and what seems more logical) -- each port LED turns on and blinks independently.

doc/supported_devices.md

@@ -23,6 +23,7 @@ The following devices have been tested and are fully working:
 | Lianguo  | ZX-SWTGW215AS   | Yes     | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md)          | 2M    | 5 + 1 |
 | Mokerlink| 2G040210GSM     | Yes     | [2M-PCB43-V1.1](devices/2M-PCB43-V1.1.md)                                 |       | 4 + 2 |
 | Mokerlink| ZX-SWTGW218AS   | Yes     | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md)                             | 2M    | 8 + 1 |
+| MokerLink| POE-2G080110GS  | No      | [2M-PCB51-ML-V1.1](devices/2M-PCB51-ML-V1_1.md)                           | 4M    | 8 + 1 |
 | Ruiying  | RY-4GT-2SX      | No      | [FG-4GT-2SX_V2.0](devices/FG-4GT-2SX_V2.0.md)                             | 4M    | 4 + 2 |
 | Ruiying  | RY-8GT-1SX      | No      | [FG-8GT-1SX](devices/FG-8GT-1SX.md)                                       | 1M    | 8 + 1 |
 | SiscoLink | SL-G0402F      | No      | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md)                           |       | 4 + 2 |

machine.c

@@ -1145,6 +1145,50 @@ __code const struct machine machine = {
 	},
 };
 
+#elif defined MACHINE_POE_2G080110GS
+__code const struct machine machine = {
+	.machine_name = "MokerLink POE-2G080110GS",
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = { .sda = GPIO39_I2C_SDA4, .scl = GPIO40_I2C_SCL3_MDC1 },
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{
+			/* SET0: RJ45  2.5G = amber, 1G/100M/10M = green */
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT, /* amber */
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* green */
+			0,
+			0
+		},
+		{
+			/* SET1: SFP+ port = green */
+			LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M |
+				LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
+			0,
+			0,
+			0
+		}
+	},
+	.led_mux_custom = 1,
+	.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08,
+			0x09, 0x0c, 0x09, 0x0d, 0x10,
+			0x11, 0x0e, 0x14, 0x11, 0x12,
+			0x15, 0x15, 0x16, 0x18, 0x19,
+			0x1a, 0x19, 0x1d, 0x1e, 0x1c,
+			0x1d, 0x20, 0x21 },
+};
+
 #else
 	#error "Please select a machine type in machine.h"
 #endif

machine.h

@@ -44,6 +44,7 @@
 // #define MACHINE_SWTG024AS_V2_0
 // #define MACHINE_FG_4GT_2SX_V2_0
 // #define MACHINE_FG_8GT_1SX
+// #define MACHINE_POE_2G080110GS
 
 typedef struct {
 	// GPIO pins for SDA/SCL