gitproxy/RTLPlayground
1
0 Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-10-29 17:54:14 +08:00
Code Issues Packages Projects Releases Wiki Activity

Merge pull request #647 from tofurky/PCB-K0402WS-V1.0

Browse Source 
Add support for YuanLey YS25-0402 (PCB-K0402WS-V1.0) + misc. doc cleanups
This commit is contained in:
René van Dorst authored and GitHub committed 2026-10-18 08:05:35 +00:00
2 parents 24d2cd7bab 4963fbe50a
commit 11eadc5a49
13 files changed
+158 -16
Download Patch File Download Diff File Expand all files Collapse all files

No files matched your search

doc/devices/PCB-K0402WS-V1.0.md
+72
View File
@@ -0,0 +1,72 @@
# PCB-K0402WS-V1.0
This is the first revision of the PCB-K0402WS series of boards; it's very similar to 2.0 in terms of layout/wiring.
The board does have footprints for a VLAN modeswitch at the front and a second flash chip on the bottom of the PCB, but these have been seen to ship unpopulated.
### Brands
* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402WS-V3.0.md) of the YS25-0402. This first revision lacks the "Vlan" switch cutout on the front of the enclosure.</sub></sup>
### Programming
Use a SOIC-8 clamp to the flash chip (U1 on silkscreen) at the top of the board, leaving it otherwise unpowered.
The board has been seen to ship with a single [BoyaMicro BY25Q16BSSIG](https://www.lcsc.com/datasheet/C382744.pdf) 16Mbit (2MiB) chip, though exact BOM may vary.
<a href="photos/PCB-K0402WS-V1.0/flash.jpg"><img src="photos/PCB-K0402WS-V1.0/flash.jpg" width="300" /></a>
### What works
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Both SFP ports supporting 1G, 2.5G and 10G modules
- LEDs (Power LED is always on)
### PCB overview
#### Board markings
- Top silkscreen: PCB-K0402W-V1.0 / DIP-K0402WS-V1.0
#### Key components
- U1: SPI NOR flash, 2 MiB
- S1: unpopulated slide switch footprint (three through-holes used as serial console)
Front panel
<a href="photos/PCB-K0402WS-V1.0/ports.jpg"><img src="photos/PCB-K0402WS-V1.0/ports.jpg" width="300" /></a>
PCB top
<a href="photos/PCB-K0402WS-V1.0/pcb-top.jpg"><img src="photos/PCB-K0402WS-V1.0/pcb-top.jpg" width="300" /></a>
PCB bottom
<a href="photos/PCB-K0402WS-V1.0/pcb-bottom.jpg"><img src="photos/PCB-K0402WS-V1.0/pcb-bottom.jpg" width="300" /></a>
Bottom and rear
<a href="photos/PCB-K0402WS-V1.0/bottom.jpg"><img src="photos/PCB-K0402WS-V1.0/bottom.jpg" width="300" /></a>
### Power supply
Input power is delivered via a standard DC barrel jack (5.5x2.1mm) with an included 12V 1A adapter.
There is an optional grounding screw next to the DC input.
### Serial console
The PCB has a slide switch footprint (unpopulated) at the front right that is connected to the UART. It is labeled as "S1" on the silkscreen.
Facing the top front (port) side of the board, the pinout from left to right is:
| Position | Signal | GPIO |
|----------|--------|-------------------|
| 1 | RX | GPIO32\_UART0\_RX |
| 2 | GND | N/A |
| 3 | TX | GPIO31\_UART0\_TX |
Standard 0.1" / 2.54mm pin headers will not fit, so wires or clips may be used instead.
The image below shows some oversized clips clumsily attached.
<a href="photos/PCB-K0402WS-V1.0/uart.jpg"><img src="photos/PCB-K0402WS-V1.0/uart.jpg" width="300" /></a>
doc/devices/PCB-K0402WS-V3.0.md
+8 -3
View File
@@ -19,9 +19,14 @@ of the device just above the big label, might be covered by a QC sticker.
<img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402_label.jpg" width="300" />
* Siscolink SL-G0402F
* SICSOLINK SL-G0402F
<img src="photos/PCB-K0402WS-V3.0/SICSOLINK SL-G0402F.jpg" width="300"/>
* YuanLey YS25-0402 <sup><sub>Note: there are [multiple revisions](PCB-K0402WS-V1.0.md) of the YS25-0402. This is the newer revision that has a "Vlan" switch on the front.</sub></sup>
<img src="photos/PCB-K0402WS-V3.0/YuanLey_YS25-0402.jpg" width="300"/>
<img src="photos/PCB-K0402WS-V3.0/Siscolink SL-G0402F.jpg" width="300"/>
### Programming
Using SPI clamp in-board is the only method for initial installation.
@@ -43,7 +48,7 @@ For the initial flash (at least with flashrom), the bin file produced by the bui
### PCB overview
**Board markings**
- Top silkscreen: PCB-KO4022W-V3.0 / DIP-KO4022WS-V3.0
- Top silkscreen: PCB-K0402W-V3.0 / DIP-K0402WS-V3.0
Top side
doc/devices/photos/PCB-K0402WS-V1.0/bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.1 MiB

doc/devices/photos/PCB-K0402WS-V1.0/flash.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 944 KiB

doc/devices/photos/PCB-K0402WS-V1.0/pcb-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.7 MiB

doc/devices/photos/PCB-K0402WS-V1.0/pcb-top.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.6 MiB

doc/devices/photos/PCB-K0402WS-V1.0/ports.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 1.2 MiB

doc/devices/photos/PCB-K0402WS-V1.0/uart.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 229 KiB

doc/devices/photos/PCB-K0402WS-V3.0/Siscolink SL-G0402F.jpg → doc/devices/photos/PCB-K0402WS-V3.0/SICSOLINK SL-G0402F.jpg
View File
File renamed without changes.
doc/devices/photos/PCB-K0402WS-V3.0/YuanLey_YS25-0402.jpg
BIN
View File
Binary file not shown.
Side by Side

After

Width:  |  Height:  |  Size: 804 KiB

doc/supported_devices.md
+15 -13
View File
@@ -4,14 +4,16 @@ The following devices have been tested and are fully working:
| Brand | Type | Managed | PCB | Flash | Ports |
|----------|-----------------|---------|---------------------------------------------------------------------------|-------|-------|
| Ampcom | WAM902-SWTG018AS| No | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md) | | 8 + 1 |
| Binardat | 2G06-04210GSM | No | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md) | 0.5M | 4 + 2 |
| Davuaz | Da-K6501W | No | [PCB-K0501W-V2.0](devices/K0501W_V2_0.md) | | 5 + 1 |
| FOXNEO | FNS-1200P | No | [PCB-K0402W-U13-V2.0](devices/FNS-1200P.md) | 2M | 4 + 2 |
| Goalake | IG108 | No | [PB-2132](devices/PB-2132.md) | 4M | 8 + 1 |
| GoodTop | GT-ST018M | Yes | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md) | ? | 8 + 1 |
| GoodTop | GT-ST024M | Yes | [SWTG024AS-A V2.0.1](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 2M | 4 + 2 |
| GoodTop | GT-ST024M | Yes | [SWTG024AS-A V2.0.1](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 2M | 4 + 2 |
| Guangnianwei | 7018-2.5G | No | [F7008-2.5GPOE-V1.2](devices/F7008-2.5.md) | 8M | 8 + 1 |
| Hasivo | S1100WP_8GT_1SX_SE | Yes | [S1100WP_8GT_1SX_SE-V1.05](devices/HASIVO_S1100WP_8GT_1SX_SE.md) | 2M | 8 + 1 |
| Hisource | Hi-K0402WS | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
| Hisource | Hi-K0402WS | No | [PCB-K0402WS-V2.0](devices/PCB-K0402WS-V2.0.md) | 2M | 4 + 2 |
| Hisource | Hi-K0402WS | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
| Hisource | Hi-K0801WS | No | [PCB-KO801W-V2.0](devices/HI-K0801WS.md) | | 8 + 1 |
| hongyavision | LG-SG5T1 | No | [PCB-SWTG024AS-V2.0_16895](devices/SWTG024AS-V2.0.md) | 0.5M | 5 + 1 |
| Horaco | HC-SWTGW215AS | Yes | [SWTG024AS-A-V2.0.1_19650 5C 1SFP](devices/SWTG024AS-A-V2.0.1_5C_1SFP.md) | ? | 5 + 1 |
@@ -20,29 +22,29 @@ The following devices have been tested and are fully working:
| Horaco | ZX310S-4T2XT | Yes | [PCB-SL310S-4T2XT-V1.0.0-22273](devices/ZX310S-4T2XT.md) | 2M | 6 |
| Horaco | ZX-SG4T2 | No | [SWTG024AS-A-V2.0.1_19650_4C_2SFP](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 0.5M | 4 + 2 |
| Horaco | ZX-SWTG124AS | Yes | [SWTG024AS-v2.0](devices/SWTG024AS.md) | | 4 + 2 |
| Keeplink | KP-9000-6XH-X2 / KP-9000-6XHML-X2 | No/Yes | [2M-PCB43-V1.2 / V2.1](devices/KP-9000-6XH-X2.md) | | 4 + 2 |
| keepLINK | KP-9000-6XH-X2 / KP-9000-6XHML-X2 | No/Yes | [2M-PCB43-V1.2 / V2.1](devices/KP-9000-6XH-X2.md) | | 4 + 2 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V2.2](devices/2M-PCB23-V2_2.md) | 2M | 8 + 1 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V3.1](devices/2M-PCB23-V3_1.md) | 2M | 8 + 1 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V3.2](devices/2M-PCB23-V3_2.md) | 2M | 8 + 1 |
| LIANGUO | HYWS-SGT0108S | No | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md) | 0.5M | 8 + 1 |
| LIANGUO | SWTG024AS | No | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md) | 0.5M | 4 + 2 |
| Lianguo | ZX-SWTGW215AS | Yes | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md) | 2M | 5 + 1 |
| Lianguo | HYWS-SGT0108S | No | [2G5F_20G_V1.01](devices/HYWS-SGT0108S.md) | 0.5M | 8 + 1 |
| Mokerlink| 2G040210GSM | Yes | [2M-PCB43-V1.1](devices/2M-PCB43-V1.1.md) | | 4 + 2 |
| Mokerlink| ZX-SWTGW218AS | Yes | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md) | 2M | 8 + 1 |
| LIANGUO | ZX-SWTGW215AS | Yes | [PCB-SWTG115AS-V2.0 / PCB-SWTG115AS-V2.1](devices/SWTGW215AS.md) | 2M | 5 + 1 |
| MokerLink| 2G040210GSM | Yes | [2M-PCB43-V1.1](devices/2M-PCB43-V1.1.md) | | 4 + 2 |
| MokerLink| POE-2G080110GS | No | [2M-PCB51-ML-V1.1](devices/2M-PCB51-ML-V1_1.md) | 4M | 8 + 1 |
| Binardat | 2G06-04210GSM | No | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md) | 0.5M | 4 + 2 |
| ONT | ONT-S207CW-62TS-SE | No | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md) | 0.5M | 4 + 2 |
| MokerLink| ZX-SWTGW218AS | Yes | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md) | 2M | 8 + 1 |
| Netcore | GS9 | No | [PB-2132](devices/PB-2132.md) | 4M | 8 + 1 |
| ONT | ONT-S207CW-62TS-SE | No | [PCB-SWTG024AS-A-2.0.1](devices/ONT-S207CW-62TS-SE.md) | 0.5M | 4 + 2 |
| Ruiying | RY-4GT-2SX | No | [FG-4GT-2SX_V2.0](devices/FG-4GT-2SX_V2.0.md) | 4M | 4 + 2 |
| Ruiying | RY-8GT-1SX | No | [FG-8GT-1SX](devices/FG-8GT-1SX.md) | 1M | 8 + 1 |
| SiscoLink | SL-G0402F | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
| SICSOLINK| SL-G0402F | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
| Sodola | SL-SWTG124AS-D | Yes | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md) | 2M | 4 + 2 |
| Steamemo | IG204-V1 | No | [PB-2131](devices/STEAMEMO_IG204_V1.md) | | 4 + 2 |
| TrendNet | TEG-S562 | No | [TEG-S563/EU H/W: V1.0R](devices/TEG-S562.md) | 2M | 4 + 2 |
| Xikestore| SKS3200M-4GPY2XF| Yes | [SWTG024AS-v1.0](devices/SWTG024AS.md) | | 4 + 2 |
| TRENDnet | TEG-S562 | No | [TEG-S563/EU H/W: V1.0R](devices/TEG-S562.md) | 2M | 4 + 2 |
| XikeStor | SKS3200M-4GPY2XF| Yes | [SWTG024AS-v1.0](devices/SWTG024AS.md) | | 4 + 2 |
| XikeStor | SKS3200-8E1X | Yes | [SWTG118AS-V2.1-17462](devices/SWTGW218AS.md) | 2M | 8 + 1 |
| YuanLey | YS25-0402 | No | [PCB-K0402WS-V1.0](devices/PCB-K0402WS-V1.0.md) | 2M | 4 + 2 |
| YuanLey | YS25-0402 | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | 2M | 4 + 2 |
| Ztyuav | Z-QWYT0402 | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
| Guangnianwei | 7018-2.5G | No | [F7008-2.5GPOE-V1.2](devices/F7008-2.5.md) | 8M | 8 + 1 |
For KP-9000-6XH-X2 / KP-9000-6XHML-X2 / Mokerlink 2G040210GSM devices, select
the machine target by PCB revision. The ML/non-ML or managed/unmanaged label
machine/PCB_K0402WS_V1.c
+57
View File
@@ -0,0 +1,57 @@
#include "machine_defs.h"
__code const struct machine machine = {
.machine_name = MACHINE_MODEL,
.isRTL8373 = 0,
.min_port = 3,
.max_port = 8,
.n_sfp = 2,
.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
/* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
.sfp_port[0].pin_los = GPIO37,
.sfp_port[0].pin_tx_disable = GPIO_NA,
.sfp_port[0].sds = 1,
.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
/* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
.sfp_port[1].pin_tx_disable = GPIO_NA,
.sfp_port[1].sds = 0,
.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
.reset_pin = GPIO_NA,
/* These don't appear to be populated / wired-up; the power LED is always on */
.high_leds = { 0 },
/* Copper ports use SET0; SFP ports use SET1 */
.port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},
.led_sets = {
{ /* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
LEDS_2G5 | LEDS_LINK | LEDS_ACT,
0,
LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0
},
{ /* SET1: SFP — all speeds link/act */
LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
0,
0,
0
},
},
.led_mux_custom = 1,
.led_mux = {
0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, /* GPIO0-7: unused */
0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, /* GPIO8-14 */
0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, /* GPIO15-20 */
0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23 /* GPIO21-27 */
},
};
machine/PCB_K0402WS_V1.h
+6
View File
@@ -0,0 +1,6 @@
#ifndef _MACHINE_PCB_K0402WS_V1_H_
#define _MACHINE_PCB_K0402WS_V1_H_
#define MACHINE_MODEL "PCB-K0402WS-V1.0"
#endif