Archived
125 lines
4.2 KiB
Markdown
125 lines
4.2 KiB
Markdown
## 1.修改系统Grub参数
|
||
|
||
使用 SSH 工具登录到 PVE 服务器，编辑系统 Grub 的配置文件 `/etc/default/grub` ：
|
||
|
||
```bash
|
||
## 编辑 Grub 配置文件
|
||
nano /etc/default/grub
|
||
```
|
||
|
||
在 `nano` 编辑器对话框中修改 `GRUB_CMDLINE_LINUX_DEFAULT` 参数，注意命令中间的空格：
|
||
|
||
```bash
|
||
## Intel 处理器添加参数
|
||
GRUB_CMDLINE_LINUX_DEFAULT="quiet intel_iommu=on"
|
||
```
|
||
|
||
根据官方文档的说明，AMD 处理器下硬件直通功能将会自动打开，否则需要手动修改 Grub 配置文件：
|
||
|
||
```bash
|
||
## AMD 处理器添加参数
|
||
GRUB_CMDLINE_LINUX_DEFAULT="quiet amd_iommu=on"
|
||
```
|
||
|
||
修改并保存后，需要更新系统 Grub ：
|
||
|
||
```bash
|
||
## 更新系统 Grub
|
||
update-grub
|
||
```
|
||
|
||
## 2.加载系统内核模块
|
||
|
||
修改系统 `/etc/modules` 配置文件，增加必要的系统模块：
|
||
|
||
```bash
|
||
## 编辑系统配置文件
|
||
nano /etc/modules
|
||
```
|
||
|
||
在配置文件末尾输入以下内容：
|
||
|
||
```txt
|
||
vfio
|
||
vfio_iommu_type1
|
||
vfio_pci
|
||
vfio_virqfd
|
||
```
|
||
|
||
将配置文件保存，并重启 PVE 服务器。
|
||
|
||
PVE 服务器重启完成后，再次使用 SSH 工具登录，并使用以下命令检查硬件直通状态：
|
||
|
||
```bash
|
||
## 检查系统硬件直通状态
|
||
dmesg | grep -e DMAR -e IOMMU -e AMD-Vi
|
||
```
|
||
|
||
检查 `IOMMU` 、 `Directed I/O` 或 `Interrupt Remapping` 的启用状态。
|
||
|
||
N5105 处理器示例输出如下：
|
||
|
||
```txt
|
||
[ 0.016437] ACPI: DMAR 0x00000000787BF000 000088 (v02 INTEL EDK2 00000002 01000013)
|
||
[ 0.016472] ACPI: Reserving DMAR table memory at [mem 0x787bf000-0x787bf087]
|
||
[ 0.052437] DMAR: IOMMU enabled
|
||
[ 0.144431] DMAR: Host address width 39
|
||
[ 0.144432] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
|
||
[ 0.144439] DMAR: dmar0: reg_base_addr fed90000 ver 4:0 cap 1c0000c40660462 ecap 49e2ff0505e
|
||
[ 0.144441] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
|
||
[ 0.144446] DMAR: dmar1: reg_base_addr fed91000 ver 1:0 cap d2008c40660462 ecap f050da
|
||
[ 0.144449] DMAR: RMRR base: 0x0000007b800000 end: 0x0000007fbfffff
|
||
[ 0.144452] DMAR-IR: IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
|
||
[ 0.144453] DMAR-IR: HPET id 0 under DRHD base 0xfed91000
|
||
[ 0.144454] DMAR-IR: Queued invalidation will be enabled to support x2apic and Intr-remapping.
|
||
[ 0.146335] DMAR-IR: Enabled IRQ remapping in x2apic mode
|
||
[ 0.333509] pci 0000:00:02.0: DMAR: Skip IOMMU disabling for graphics
|
||
[ 0.410824] DMAR: No ATSR found
|
||
[ 0.410824] DMAR: No SATC found
|
||
[ 0.410826] DMAR: IOMMU feature fl1gp_support inconsistent
|
||
[ 0.410827] DMAR: IOMMU feature pgsel_inv inconsistent
|
||
[ 0.410829] DMAR: IOMMU feature nwfs inconsistent
|
||
[ 0.410829] DMAR: IOMMU feature pds inconsistent
|
||
[ 0.410830] DMAR: IOMMU feature eafs inconsistent
|
||
[ 0.410831] DMAR: IOMMU feature prs inconsistent
|
||
[ 0.410831] DMAR: IOMMU feature nest inconsistent
|
||
[ 0.410832] DMAR: IOMMU feature mts inconsistent
|
||
[ 0.410832] DMAR: IOMMU feature sc_support inconsistent
|
||
[ 0.410833] DMAR: IOMMU feature dev_iotlb_support inconsistent
|
||
[ 0.410835] DMAR: dmar0: Using Queued invalidation
|
||
[ 0.410838] DMAR: dmar1: Using Queued invalidation
|
||
[ 0.412755] DMAR: Intel(R) Virtualization Technology for Directed I/O
|
||
```
|
||
|
||
检查系统 `IOMMU` 分组：
|
||
|
||
```bash
|
||
## 检查 IOMMU group
|
||
find /sys/kernel/iommu_groups/ -type l
|
||
```
|
||
|
||
示例输出如下：
|
||
|
||
```txt
|
||
/sys/kernel/iommu_groups/7/devices/0000:00:1c.4
|
||
/sys/kernel/iommu_groups/15/devices/0000:04:00.0
|
||
/sys/kernel/iommu_groups/5/devices/0000:00:17.0
|
||
/sys/kernel/iommu_groups/13/devices/0000:02:00.0
|
||
/sys/kernel/iommu_groups/3/devices/0000:00:14.2
|
||
/sys/kernel/iommu_groups/3/devices/0000:00:14.0
|
||
/sys/kernel/iommu_groups/11/devices/0000:00:1f.0
|
||
/sys/kernel/iommu_groups/11/devices/0000:00:1f.5
|
||
/sys/kernel/iommu_groups/11/devices/0000:00:1f.3
|
||
/sys/kernel/iommu_groups/11/devices/0000:00:1f.4
|
||
/sys/kernel/iommu_groups/1/devices/0000:00:02.0
|
||
/sys/kernel/iommu_groups/8/devices/0000:00:1c.5
|
||
/sys/kernel/iommu_groups/16/devices/0000:05:00.0
|
||
/sys/kernel/iommu_groups/6/devices/0000:00:1c.0
|
||
/sys/kernel/iommu_groups/14/devices/0000:03:00.0
|
||
/sys/kernel/iommu_groups/4/devices/0000:00:16.0
|
||
/sys/kernel/iommu_groups/12/devices/0000:01:00.0
|
||
/sys/kernel/iommu_groups/2/devices/0000:00:04.0
|
||
/sys/kernel/iommu_groups/10/devices/0000:00:1c.7
|
||
/sys/kernel/iommu_groups/0/devices/0000:00:00.0
|
||
/sys/kernel/iommu_groups/9/devices/0000:00:1c.6
|
||
``` |