更新截图

This commit is contained in:
CallMeR
2026-08-10 00:16:31 +08:00
parent f991ec8525
commit fbd1e44d11
23 changed files with 11 additions and 11 deletions
+11 -11
View File
@@ -114,23 +114,23 @@ Microsoft 官方终端工具,可以在 Github 平台或 Microsoft 应用商店
使用 `方向键` 选择第一项 `Install Proxmox VE (Graphical)` 图形化安装界面,按键盘 `Enter` 进入下一步骤。
![PVE安装选项](img/p01/pve_option.jpeg)
![PVE安装选项](img/p01/pve_option.jpg)
设备将继续跑码,直到出现最终用户许可协议 EULA ,按键盘组合键 `ALT + N ` 进入下一步骤。
![PVE用户协议](img/p01/pve_eula.jpeg)
![PVE用户协议](img/p01/pve_eula.jpg)
### 1.3. PVE 硬盘选项
此时会出现 `Target Harddisk` 选项,会显示出设备中存在的硬盘列表,可通过下拉框选择安装 PVE 的目标硬盘。
![PVE选择安装硬盘](img/p01/pve_hd_choose.jpeg)
![PVE选择安装硬盘](img/p01/pve_hd_choose.jpg)
点击硬盘列表右侧的 `Options` ,对 PVE 的硬盘安装参数进行一些调整。
推荐将 `Filesystem` 也就是硬盘的文件系统,设置成 `xfs`
![PVE文件系统](img/p01/pve_hd_fs.jpeg)
![PVE文件系统](img/p01/pve_hd_fs.jpg)
### 1.4. PVE 时区选项
@@ -138,7 +138,7 @@ Microsoft 官方终端工具,可以在 Github 平台或 Microsoft 应用商店
`Contry` 处手动输入 `China` ,下方的 `Time zone` 将自动变更为 `Asia/Shanghai`
![PVE时区](img/p01/pve_timezone.jpeg)
![PVE时区](img/p01/pve_timezone.jpg)
### 1.5. PVE 账户与邮箱
@@ -146,7 +146,7 @@ PVE 为最关键的虚拟化层,建议使用强密码,包含大小写字母
`Email` 必须为一个 “合法” 的邮箱地址,不然系统会判定邮箱地址不合法并拒绝继续安装。
![PVE邮箱设置](img/p01/pve_email.jpeg)
![PVE邮箱设置](img/p01/pve_email.jpg)
### 1.6. PVE 网络设置
@@ -154,7 +154,7 @@ PVE 为最关键的虚拟化层,建议使用强密码,包含大小写字母
而某些设备,其物理网口顺序与该页面显示的网口顺序 **不一致** ,因此保持默认设置即可。
![PVE管理网口设置](img/p01/pve_eth.jpeg)
![PVE管理网口设置](img/p01/pve_eth.jpg)
FQDN 为 PVE 的域,PVE 将使用 FQDN 中的二级域名作为其主机名。
@@ -173,17 +173,17 @@ PVE 安装完成后,可通过其提供的 Web 管理界面,进一步调整
|Gateway|`172.16.1.1`|设置 PVE IPv4 网关|
|DNS Server|`172.16.1.1`|设置 PVE IPv4 DNS |
![PVE管理IP地址](img/p01/pve_ip.jpeg)
![PVE管理IP地址](img/p01/pve_ip.jpg)
### 1.7. PVE 参数确认
该页面会显示当前 PVE 的安装配置总览,确认无误后即可开始安装。
![PVE安装确认](img/p01/pve_install_confirm.jpeg)
![PVE安装确认](img/p01/pve_install_confirm.jpg)
安装完成后,PVE 会告知用户登录的 `IP 地址``端口`
![PVE安装完成](img/p01/pve_install_finish.jpeg)
![PVE安装完成](img/p01/pve_install_finish.jpg)
## 2. PVE 安装后检查
@@ -209,7 +209,7 @@ $ cat /etc/os-release
此处显示出 PVE 底层使用的是 Debian 的系统,代号为 `trixie` ,该代号后续会使用到。
![PVE系统信息](img/p01/pve_sys_info.jpeg)
![PVE系统信息](img/p01/pve_sys_info.jpg)
至此 PVE 的安装步骤已经完成。
Binary file not shown.

Before

Width:  |  Height:  |  Size: 261 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 544 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 310 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 594 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 218 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 828 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 152 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 588 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 156 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 508 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 273 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 463 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 94 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 373 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 307 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 580 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 266 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 224 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 603 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 586 KiB

Binary file not shown.

Before

Width:  |  Height:  |  Size: 136 KiB

Binary file not shown.

After

Width:  |  Height:  |  Size: 470 KiB