更新备注

src/debian/debian_ts_99_sysctl.conf

@@ -1,5 +1,5 @@
 # This configuration file is customized by fox,
-# Optimize sysctl parameters for Linux Router.
+# Optimize sysctl parameters for local TS server.
 
 kernel.panic = 20
 kernel.panic_on_oops = 1

src/debian/debian_ts_dnsmasq.conf

@@ -1,5 +1,5 @@
 # This configuration file is customized by fox,
-# Optimize dnsmasq parameters for local DNS server.
+# Optimize dnsmasq parameters for local TS server.
 
 # Main Config
 

src/debian/debian_ts_lo_network.conf

@@ -1,5 +1,5 @@
 # This configuration file is customized by fox,
-# Optimize for lo network.
+# Optimize lo network for local TS server.
 
 [Match]
 Name=lo

src/debian/debian_ts_nftables.conf

@@ -1,7 +1,7 @@
 #!/usr/sbin/nft -f
 
 # This configuration file is customized by fox,
-# Optimize nftables rules for Linux Router.
+# Optimize nftables rules for local TS server.
 
 table inet router
 flush table inet router
@@ -29,7 +29,7 @@ table inet router {
         ct state invalid counter drop comment "defconf: drop input flows with invalid conntrack state"
         tcp flags & (fin | syn | rst | ack) == syn counter jump syn_flood comment "defconf: rate limit TCP-SYN packets"
         iifname "eth0" jump input_lan comment "defconf: handle LAN IPv4 / IPv6 input traffic"
-        iifname "tailscale0" jump input_tailscale comment "defconf: handle Tailscale IPv4 / IPv6 input traffic"
+        iifname "tailscale0" jump input_tailscale comment "tsconf: handle Tailscale IPv4 / IPv6 input traffic"
     }
 
     chain forward {
@@ -38,7 +38,7 @@ table inet router {
         ct state established,related accept comment "defconf: allow forwarded established and related flows"
         ct state invalid counter drop comment "defconf: drop forward flows with invalid conntrack state"
         iifname "eth0" jump forward_lan comment "defconf: handle LAN IPv4 / IPv6 forward traffic"
-        iifname "tailscale0" jump forward_tailscale comment "defconf: handle Tailscale IPv4 / IPv6 forward traffic"
+        iifname "tailscale0" jump forward_tailscale comment "tsconf: handle Tailscale IPv4 / IPv6 forward traffic"
     }
 
     chain output {
@@ -47,7 +47,7 @@ table inet router {
         ct state established,related accept comment "defconf: allow outbound established and related flows"
         ct state invalid counter drop comment "defconf: drop output flows with invalid conntrack state"
         oifname "eth0" jump output_lan comment "defconf: handle LAN IPv4 / IPv6 output traffic"
-        oifname "tailscale0" jump output_tailscale comment "defconf: handle Tailscale IPv4 / IPv6 output traffic"
+        oifname "tailscale0" jump output_tailscale comment "tsconf: handle Tailscale IPv4 / IPv6 output traffic"
     }
 
     chain prerouting {
@@ -66,7 +66,7 @@ table inet router {
     }
 
     chain forward_lan {
-        jump accept_to_tailscale comment "lanconf: accept Tailscale forward"
+        jump accept_to_tailscale comment "tsconf: accept Tailscale forward"
         ct status dnat counter accept comment "lanconf: accept port forward"
         jump accept_to_lan
     }
@@ -96,16 +96,16 @@ table inet router {
     }
 
     chain forward_tailscale {
-        jump accept_to_lan comment "defconf: accept Tailscale to LAN forward"
+        jump accept_to_lan comment "tsconf: accept Tailscale to LAN forward"
         jump accept_to_tailscale
     }
 
     chain accept_from_tailscale {
-        iifname "tailscale0" counter accept comment "defconf: accept Tailscale IPv4 / IPv6 traffic"
+        iifname "tailscale0" counter accept comment "tsconf: accept Tailscale IPv4 / IPv6 traffic"
     }
 
     chain accept_to_tailscale {
-        oifname "tailscale0" counter accept comment "defconf: accept Tailscale IPv4 / IPv6 traffic"
+        oifname "tailscale0" counter accept comment "tsconf: accept Tailscale IPv4 / IPv6 traffic"
     }
 
 

src/debian/debian_ts_resolv.conf

@@ -1,5 +1,5 @@
 # This configuration file is customized by fox,
-# Optimize system resolve parameters for Linux Router.
+# Optimize system resolve parameters for local TS server.
 #
 # For use local domain,
 # please modify 'search' parameter according to