mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
d00f
1c8cdab4bf
IPBUF is laid out for frames we send, with the 12 byte TX descriptor in front of the Ethernet header. A received frame starts with the Ethernet header at uip_buf[0] and carries the RTL and VLAN tags after the addresses, so IPBUF->ethhdr.src read the port mask and both VLAN fields as a MAC. Every IP packet from the local network then replaced the sender's ARP entry with that, and our replies went to an address nobody has. The IP source address sits at the same offset in both layouts, which is why the rest looked right. Use BUF, the receive view uip_arp_arpin() already works from.