mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-08-30 14:52:51 +08:00
bloqaudio
0998b7381f
The SWTGW218AS label covers more than one PCB. On boards with the SWTG018AS-V2.1.0 silkscreen the SFP module-detect is GPIO38 (no LOS pin wired) and the LED block is wired differently, including a bi-color SFP LED (green up to 2.5G, blue at 10G) that the LED-set encoding cannot express. With the existing MACHINE_SWTGW218AS definition these boards never detect an SFP module, so an SFP-uplinked switch comes up with no working uplink. Add the variant as its own machine define named by the PCB marking, leaving MACHINE_SWTGW218AS unchanged for boards that match its wiring. The LED register values are taken from the stock firmware; the PIN_MUX_0 write routes the blue-LED pin to the LED controller, without which no LED register value can drive it. PIN_MUX_1/2 stay untouched so SFP detect and i2c remain GPIOs.
101 lines
2.8 KiB
C
101 lines
2.8 KiB
C
#ifndef _MACHINE_H_
|
|
#define _MACHINE_H_
|
|
|
|
#include <stdint.h>
|
|
|
|
/*
|
|
* Select your machine type below
|
|
*/
|
|
// #define MACHINE_KP_9000_6XHML_X2
|
|
// #define MACHINE_KP_9000_6XH_X
|
|
// #define MACHINE_KP_9000_6XH_X2
|
|
// #define MACHINE_KP_9000_9XH_X_EU
|
|
// #define MACHINE_KP_9000_9XHML_X_V2_2
|
|
// #define MACHINE_KP_9000_9XHML_X_V3_1
|
|
// #define MACHINE_SWGT024_V2_0_MANAGED
|
|
// #define MACHINE_SWGT024_V2_0_UNMANAGED
|
|
// #define MACHINE_TRENDNET_TEG_S562
|
|
// #define MACHINE_HG0402XG_V1_1
|
|
// #define MACHINE_SWTG018AS_A_V_2_0
|
|
// #define MACHINE_SWTGW218AS
|
|
// #define MACHINE_PCB_SWTG018AS_V2_1_0
|
|
// #define MACHINE_PCB_K0402WS_V3
|
|
// #define MACHINE_K0501W_V2_0
|
|
// #define MACHINE_LIANGUO_ZX_SWTGW215AS
|
|
// #define MACHINE_ZX310S_4T2XH
|
|
// #define MACHINE_ZX310S_4T2XT
|
|
// #define MACHINE_STEAMEMO_IG204_V1
|
|
// #define MACHINE_DEFAULT_8C_1SFP
|
|
// #define MACHINE_HI_K0801WS
|
|
// #define MACHINE_FNS1200P
|
|
// #define MACHINE_PCB_SWTG024AS_A_2_0_1
|
|
// #define MACHINE_SWTG024AS_A_2_0_1_5C_1SFP
|
|
// #define MACHINE_SWTG024AS_V2_0
|
|
// #define MACHINE_FG_4GT_2SX_V2_0
|
|
|
|
typedef struct {
|
|
// GPIO pins for SDA/SCL
|
|
uint8_t sda;
|
|
uint8_t scl;
|
|
} i2c_bus_t;
|
|
|
|
|
|
#define LED_27 1
|
|
// SYSTEM LED
|
|
#define LED_28_SYS 2
|
|
#define LED_29 4
|
|
|
|
struct high_leds {
|
|
// Defines MUX and LED enabling for pins 27-29
|
|
uint8_t mux : 3;
|
|
uint8_t enable : 3;
|
|
uint8_t reserved : 2;
|
|
};
|
|
|
|
struct sfp_port
|
|
{
|
|
uint8_t pin_detect; // gpio number 0-63, 0xFF = don't have it?
|
|
uint8_t pin_los; // gpio number 0-63, 0xFF = don't have it?
|
|
uint8_t pin_tx_disable; // gpio number 0-63, 0xFF = not present
|
|
uint8_t sds;
|
|
i2c_bus_t i2c;
|
|
};
|
|
|
|
typedef struct machine {
|
|
char machine_name[30];
|
|
uint8_t isRTL8373;
|
|
// Lowest logical port number
|
|
uint8_t min_port;
|
|
// Highest logical port number
|
|
uint8_t max_port;
|
|
uint8_t n_sfp;
|
|
uint8_t n_10g;
|
|
uint8_t log_to_phys_port[9];
|
|
uint8_t phys_to_log_port[9]; // Starts at 0 for port 1
|
|
uint8_t is_sfp[9]; // 0 for non-SFP ports 1 or 2 for the I2C port number
|
|
// sfp_port[0] is the first SFP-port from the left on the device, sfp_port[1] the next if present
|
|
struct sfp_port sfp_port[2];
|
|
uint8_t reset_pin;
|
|
struct high_leds high_leds;
|
|
// Defines which led-set (0-3) will be used for given logical port
|
|
// led-set is physical group of LEDs that can be configured to show different port status combinations (see port_led_set below)
|
|
uint8_t port_led_set[9];
|
|
// Defines led-set configuration, applied to all ports using particular led-set
|
|
// Each led-set can have 4 different hardware LED configurations. Which one should be used, depends how LED is wired on the board
|
|
// See stock RTL837X_REG_LED3_2_SETx and RTL837X_REG_LED1_0_SETx registers for reference configuration
|
|
uint32_t led_sets[4][4];
|
|
uint8_t led_mux_custom;
|
|
uint8_t led_mux[28];
|
|
uint32_t mac_flash_offset;
|
|
};
|
|
|
|
typedef struct machine_runtime
|
|
{
|
|
uint8_t isRTL8373 : 1;
|
|
uint8_t isN : 1;
|
|
};
|
|
|
|
void machine_custom_init(void);
|
|
|
|
#endif
|