RTLPlayground/tools/led_gpio_utils

LED GPIO Utilities

This directory contains utility talking to RTL837x switch IC via I2C bus. These scripts are designed to help with monitoring, debugging GPIO, and identifying LED configurations. (Only tested in Linux)

Hardware requirements

To use these utilities, you need:

• A hardware dongle that can communicate with I2C devices. One example is the I2C-Pico-USB which provides USB-to-I2C connectivity.
• Connection between the hardware dongle and the RTL837x's I2C communication port.

Scripts

1. i2c_read_rtl_gpio.py

This script reads RTL GPIO register values via I2C and displays changes in GPIO states.

Features:

• Reads live RTL GPIO register values via I2C (default address 0x5C)
• Monitors GPIO changes with delta detection
• Allows specification of I2C bus, sleep interval, and ignored GPIO pins
• Shows changes in real-time with GPIO index display

Usage:

# Basic usage (defaults to I2C bus 1, 2s sleep interval)
python3 i2c_read_rtl_gpio.py

# Specify I2C bus
python3 i2c_read_rtl_gpio.py --i2c-bus 0

# Specify sleep interval in seconds
python3 i2c_read_rtl_gpio.py --sleep-interval 5

# Ignore specific GPIO pins
python3 i2c_read_rtl_gpio.py --ignored-ios 28 31 34 44

# Combine options
python3 i2c_read_rtl_gpio.py --i2c-bus 2 --sleep-interval 1 --ignored-ios 28 31

Output Format:

• Displays register address and data in hex format
• Shows GPIO pins that have changed since last read
• Example: 0044: 00 00 00 00 00 00 00 00

2. i2c_dump_rtl_regs.py

This script dumps all register values from an RTL device via I2C.

Features:

• Dumps registers sequentially from address 0x0000 to 0xFFFF
• Reads 16 bytes at a time for efficiency
• Configurable I2C bus number
• Provides complete register dump in hex format

Usage:

# Basic usage (defaults to I2C bus 1)
python3 i2c_dump_rtl_regs.py >reg_dump.txt

# Specify I2C bus
python3 i2c_dump_rtl_regs.py --bus 0 >reg_dump.txt

# Or using short option
python3 i2c_dump_rtl_regs.py -b 2 >reg_dump.txt

Output Format:

• Displays address and 16 bytes of data in hex format
• Example: 0000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00

3. dec_leds_from_dump.py

This script decodes LED configuration from a register dump file ( the output from i2c_dump_rtl_regs.py).

Features:

• Parses register dump files (reg_dump.txt format)
• Decodes LED pad configurations and LED sets
• Maps LED types to bit positions based on configuration
• Outputs LED mux configuration and set mappings

Usage:

# Must be run in same directory as reg_dump.txt
python3 dec_leds_from_dump.py

Output Format:

• LED pad configuration (hex values for each pad)
• LED set configurations with descriptions of LED types
• Port selection mappings

Requirements:

• Requires a reg_dump.txt file containing the register dump output

Requirements

All scripts require:

• Python 3
• smbus2 Python package

(Depend upon Linux distribution) Install with:

pip3 install python3-smbus2

OR

pip3 install smbus2

Common Use Cases

Both i2c_read_rtl_gpio.py and i2c_dump_rtl_regs.py shall run with the original firmware, not RTLPlayground firmware.

Monitoring GPIO Changes

# Monitor GPIO changes on bus 1 with 1-second intervals
python3 i2c_read_rtl_gpio.py --i2c-bus 1 --sleep-interval 1

Register Analysis

# Dump all device registers
python3 i2c_dump_rtl_regs.py --bus 2 > reg_dump.txt

# Analyze the register dump to understand LED configuration
python3 dec_leds_from_dump.py

Configuration

All scripts support command-line arguments for flexible configuration:

• --i2c-bus or -b: Specify I2C bus (default: 1)
• --sleep-interval or -s: Sleep between reads in seconds (default: 2)
• --ignored-ios or -i: GPIO pins to ignore (default: [28, 31, 34, 44])