mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
1.5 KiB
1.5 KiB
SWTG024AS-A-V2.0.1_4C_2SFP
It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
Brands
| Brand | Type | Managed | PCB | Flash | Chip RTL |
|---|---|---|---|---|---|
| Horaco | ZX-SG4T2 | No | PCB-SWTG024AS-A-V2.0.1_19650 | 512K (P25D40SH) | 8372N |
| Horaco | HC-SWTG124AS | Yes | PCB-SWTG024AS-A-V2.0.1(_19650) | 2M (W25Q16JV) | 8372N |
| GoodTop | GT-ST024M | Yes | PCB-SWTG024AS-A-V2.0.1 | 2M | 8372N |
Label specifications
- Name:
- Ports:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
What works
The device is fully supported:
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
PCB overview
Board markings
- Top silkscreen: PCB-SWTG024AS-A-V2.0.1_19650
Top side
Bottom
On Horaco HC-SWTG124AS with board PCB-SWTG024AS-A-V2.0.1_19650 the reset button is soldered at SW1 (on the top left).
J1, serial console
J1 pin |
Signal |
|---|---|
| 1 | 3V3 |
| 2 | GND |
| 3 | RX (Input) |
| 4 | TX (Output) |