mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
d00f
eab927f52a
Review of #397 pointed at the bare 10, which shows up in fifteen places. It is the width of the port field in the MSTP register, so it is the CPU port index plus one and it gets a name. The web page counted to ten as well when listing a group's members. It uses numPorts now, like the rest of that page does. The aggregation section of the doc no longer names the OEM firmware or calls a group a trunk, and it says plainly that the hardware keeps no per-group state, so the firmware writes the members itself. Generated code is unchanged: the only difference in the assembly is the version string.
65 lines
2.5 KiB
C
65 lines
2.5 KiB
C
#ifndef _RTL837X_STP_H_
|
|
#define _RTL837X_STP_H_
|
|
|
|
#include <stdint.h>
|
|
#include "rtl837x_common.h"
|
|
void stp_in(void) __banked;
|
|
void stp_setup(void) __banked;
|
|
void stp_timers(void) __banked;
|
|
void stp_off(void) __banked;
|
|
void stp_parse(void) __banked __reentrant;
|
|
void stp_defaults(void) __banked;
|
|
|
|
/* Tick rate of stp_timers(), also used by the web UI. */
|
|
#define STP_HZ 50
|
|
|
|
#define STP_PORTS (CPU_PORT + 1)
|
|
#define STP_LAG_BASE STP_PORTS
|
|
#define STP_LAG_COUNT 4
|
|
#define STP_ENTITIES (STP_LAG_BASE + STP_LAG_COUNT)
|
|
|
|
/* Bridge identifier as carried in a BPDU (priority, extension, MAC). */
|
|
struct bridge {
|
|
uint8_t prio;
|
|
uint8_t ext;
|
|
uint8_t mac[6];
|
|
};
|
|
|
|
extern __xdata uint8_t stp_prio;
|
|
extern __xdata uint8_t stp_hello_s;
|
|
extern __xdata uint8_t stp_maxage_s;
|
|
extern __xdata uint8_t stp_fwddelay_s;
|
|
extern __xdata uint8_t stp_rstp;
|
|
extern __xdata uint8_t stp_txhold;
|
|
|
|
/* Per-port config/status flags (stp_pflags[]) */
|
|
#define STP_PF_ENABLED 0x01 /* port participates in STP (default on) */
|
|
#define STP_PF_ADMEDGE 0x02 /* admin edge: forwarding immediately */
|
|
#define STP_PF_AUTOEDGE 0x04 /* auto edge: forward after 3 s without BPDU */
|
|
#define STP_PF_BPDUGUARD 0x08 /* disable port if a BPDU arrives */
|
|
#define STP_PF_ROOTGUARD 0x10 /* never accept a better root on this port */
|
|
#define STP_PF_FILTER 0x20 /* neither send nor accept BPDUs */
|
|
#define STP_PF_OPEREDGE 0x40 /* runtime: port went forwarding as an edge */
|
|
#define STP_PF_TRIPPED 0x80 /* runtime: disabled by BPDU guard */
|
|
|
|
extern __xdata uint8_t stp_pflags[STP_ENTITIES];
|
|
extern __xdata uint32_t stp_pcost[STP_ENTITIES]; /* path cost; 0 = auto (20000) */
|
|
extern __xdata uint8_t stp_pprio[STP_ENTITIES];
|
|
extern __xdata uint8_t stp_pp2p[STP_ENTITIES];
|
|
extern __xdata uint8_t stp_ent_of[10]; /* the STP entity a port answers to: itself, or its lag */
|
|
extern __xdata uint16_t stp_lag_mask[STP_LAG_COUNT]; /* member ports of each lag; 0 = not part of STP */
|
|
|
|
/* Last-heard designated info per port (from received BPDUs); consult
|
|
* stp_bpdu_age to decide whether it is still current. */
|
|
extern __xdata struct bridge stp_dbridge[STP_ENTITIES];
|
|
extern __xdata uint16_t stp_dpid[STP_ENTITIES];
|
|
extern __xdata uint32_t stp_dcost[STP_ENTITIES];
|
|
extern __xdata uint16_t stp_bpdu_age[STP_ENTITIES]; /* ticks since a BPDU was heard */
|
|
|
|
extern __xdata struct bridge root_bridge;
|
|
extern __xdata uint32_t root_bridge_cost;
|
|
extern __xdata uint8_t stp_root_port;
|
|
extern __xdata uint16_t stp_tc_count;
|
|
|
|
#endif
|