RTLPlayground/test

Host unit-test harness

Compile and test individual firmware translation units on the build host with gcc + AddressSanitizer + UBSan — no SDCC, no flashing, no hardware. This is the fast inner loop for the logic-level bugs in ../../NOTES/08-findings.md (parser, line editor, HTTP header, DHCP): edit → make → see red/green in seconds instead of a minutes-long flash-and-reboot cycle.

Run

cd test
make            # build + run all tests (ASan/UBSan on)
make clean

Exit status is non-zero if any check fails, a sanitizer trips, or the watchdog fires — so it drops straight into CI.

How it works

• sdcc_shim.h (force-included) erases SDCC 8051 keywords (__xdata, __code, __banked, …) so firmware sources compile under host gcc. It changes no logic — the code under test is byte-for-byte the firmware source.
• hw_mock.c / hw_mock.h simulate the ASIC edge: a flat register file behind reg_read/reg_write and the SFR_DATA_* registers, with a table engine that performs a VLAN or L2 operation the moment TBL_CTRL is written, fetches a MIB counter on STAT_GET and drops entries on L2_TBL_FLUSH_CTRL. Nothing ever reports busy, so a polling loop runs once. The header states the VLAN and L2 entry layouts independently of the firmware, so a test can hold what rtl837x_port.c writes against what page_impl.c reads.
• env_tables.c carries the globals and leaf calls those two modules link against; stub/ stands in for the two headers only a firmware build generates, so the harness needs no SDCC build first.
• support.c / support.h mock the hardware edges: the 16-byte serial ring (sbuf), the command/history buffers, and the character-output sink (write_char etc.). Buffers are sized exactly as on target, so ASan redzones catch the same off-by-one overflows the 8051 hits.
• Builds define RTLP_HOST_TEST, which hides the firmware's libc-named prototypes (memset/strlen/…) in rtl837x_common.h so they don't clash with glibc. Argument order matches libc, so on-host callers transparently use the C library. This guard is compiled out of normal firmware builds — zero on-target effect.
• A SIGALRM watchdog (watchdog_arm) turns an infinite-loop bug into a fast test failure instead of a hung runner.

Current coverage

Test binary	TU under test	Findings exercised
test_cmd_editor	cmd_editor.c	C4 — full-line hang + cmd_buffer 1-byte overflow; basic entry & backspace regressions
test_port_tables	rtl837x_port.c	VLAN entry layout and round trip, PVID register sharing, static multicast and management entries, per-port flush, trunk membership and hash seed
test_page_json	httpd/page_impl.c + rtl837x_port.c	/vlan.json, /vlanlist, /l2.json (walk, wrap marker, paging inside outbuf), 64-bit counters in /status.json and /counters.json

Adding a test for another module

1. Write test_<module>.c with main() driving the module's entry points and CHECK(cond, msg) assertions.
2. Add any missing mocked symbols to support.c (only what the linker asks for).
3. Add a target in the Makefile listing test_<module>.c support.c ../<module>.c.
4. If the module calls a firmware libc-name (memcpy/strcpy/…), it will use the C library on host (compatible arg order); provide a fw_*-style mock only if the semantics differ in a way the test cares about.

Good next targets (pure logic, high finding density): cmd_parser.c (C6/C8), the HTTP header parser in httpd/httpd.c (S1), dhcp.c (S5).