RTLPlayground/rtl837x_common.h

#ifndef _RTL837X_STDIO_H_
#define _RTL837X_STDIO_H_

#include "uip/uip-conf.h"
#include <stdint.h>
#include <stdbool.h>

#define SYS_TICK_HZ 200

#define CPU_PORT        9

// Define Port-masks for 9-port devices and 6-port devices
#define PMASK_9		0x1ff
#define PMASK_6		0x1f8
#define PMASK_CPU	0x200

// Defines a port mask for dropping all packets on Lookup-miss
#define LOOKUP_MISS_DROP_6  0x00015540
#define LOOKUP_MISS_DROP_9  0x00015555
#define LOOKUP_MISS_FLOOD   0x00000000

/* Buffer for serial input, SBUF_SIZE must be power of 2 < 256
 * Writing to this buffer is under the sole control of the serial ISR
 * Note that key-presses such as <cursor-left> can create multiple
 * keys (3 to 4) being sent via the serial line, so this must be
 * sufficiently large */
#define SBUF_SIZE 16
#define SBUF_MASK (SBUF_SIZE - 1)

extern __xdata volatile uint8_t sbuf_ptr;
extern __xdata uint8_t sbuf[SBUF_SIZE];

// Define the command buffer size, Must be 2^x and <= 128
#define CMD_BUF_SIZE 128

// Size of the TCP Output buffer
#define TCP_OUTBUF_SIZE 2500

// Size of the memory area dedicated to VLAN-names
#define VLAN_NAMES_SIZE 1024

// Size of the flash buffer used for writing to flash, must be a multiple of the flash page size (0x100)
#define FLASH_BUF_SIZE 512

// For RX data, a propriatary RTL FRAME is inserted. Instead of 0x0800 for IPv4,
// the RTL_FRAME_TAG_ID is used as part of an 8-byte tag. When VLAN is activated,
// the VLAN tag is inserted after the RTL tag
// See here for the RTL tag: https://github.com/torvalds/linux/commit/1521d5adfc2b557e15f97283c8b7ad688c3ebc40
struct rtl_tag {
	uint16_t tag;		// This is 0x8899 for the RTL837X
	uint8_t version;	// Version is 4
	uint8_t reason;
	uint16_t flags;
	uint16_t pmask;		// A bit mask for a TX pkt, 4-bit port-number for RX
};

struct vlan_tag {
	uint16_t svlan;		// Service VLAN
	uint16_t vlan;
};

#define RTL_TAG_SIZE		(sizeof (struct rtl_tag))
#define VLAN_TAG_SIZE		(sizeof (struct vlan_tag))
#define RTL_FRAME_TAG_ID	0x8899

// For RX and TX, an 8 byte header describing the frame to be moved to the Asic
// and received from the Asic is used
#define RTL_FRAME_HEADER_SIZE	8

// This is the standard size of an Ethernet frame header
#define ETHER_HEADER_SIZE	14

#define DEFAULT_CONFIG_START 0x6f000
#define CONFIG_START 0x70000
#define CONFIG_LEN 0x1000
#define CODE0_SIZE 0x4000
#define CODE_BANK_SIZE 0xc000

// Store update image after running image
#define FIRMWARE_UPLOAD_START 0x80000

// Constants for the circular command buffer, the size must be 2^n
#define CMD_HISTORY_SIZE 0x400
#define CMD_HISTORY_MASK (CMD_HISTORY_SIZE - 1)

/**
 * Representation of a 48-bit Ethernet address.
 */
struct uip_eth_addr {
   uint8_t addr[6];
};

struct flash_region_t {
    uint32_t addr;
    uint16_t len;
};

extern __xdata uint8_t uip_buf[UIP_CONF_BUFFER_SIZE+2];
extern __xdata struct uip_eth_addr uip_ethaddr;
extern __xdata uint16_t rx_packet_vlan;
extern __xdata uint16_t dhcpd_vlan;

// Headers for calls in the common code area (HOME/BANK0)
void print_string(__code char *p);
void print_string_x(__xdata char *p);
void print_long(uint32_t a);
void print_short(uint16_t a);
void print_byte(uint8_t a);
void itoa(uint8_t v);
void print_sfr_data(void);
void print_phy_data(void);
void phy_write_mask(uint16_t phy_mask, uint8_t dev_id, uint16_t reg, uint16_t v);
void phy_write(uint8_t phy_id, uint8_t dev_id, uint16_t reg, uint16_t v);
void phy_read(uint8_t phy_id, uint8_t dev_id, uint16_t reg);
void phy_modify(uint8_t phy_id, uint8_t dev_id, uint16_t reg, uint16_t mask, uint16_t set);
void reg_read(uint16_t reg_addr);
void reg_read_m(uint16_t reg_addr);
void reg_write(uint16_t reg_addr);
void reg_write_m(uint16_t reg_addr);
void delay(uint16_t t);
void sleep(uint16_t t);
void write_char(char c);
void print_reg(uint16_t reg);
uint8_t sfp_read_reg(uint8_t slot, uint8_t reg);
void reg_bit_set(uint16_t reg_addr, char bit);
void reg_bit_clear(uint16_t reg_addr, char bit);
uint8_t reg_bit_test(uint16_t reg_addr, char bit);
void sfr_mask_data(uint8_t n, uint8_t mask, uint8_t set);
void sfr_set_zero(void);
void reset_chip(void);
void memcpy(__xdata void * __xdata dst, __xdata const void * __xdata src, uint16_t len);
void memcpyc(register __xdata uint8_t *dst, register __code uint8_t *src, register uint16_t len);
void memset(register __xdata uint8_t *dst, register __xdata uint8_t v, register uint8_t len);
uint16_t strlen(register __code const char *s);
uint16_t strlen_x(register __xdata const char *s);
uint16_t strtox(register __xdata uint8_t *dst, register __code const char *s);
uint16_t strcpy(register __xdata uint8_t *dst, register const char *s);
void tcpip_output(void);
uint8_t read_flash(uint8_t bank, __code uint8_t *addr);
void get_random_32(void);
void read_reg_timer(uint32_t * tmr);
void sfp_print_info(uint8_t sfp);
bool gpio_pin_test(uint8_t pin);
void set_sys_led_state(uint8_t state);

#endif