mirror of
https://github.com/logicog/RTLPlayground.git
synced 2026-10-29 17:54:14 +08:00
d00f
3c8de6da87
The replay takes a line of at most 126 bytes, so a longer one is skipped on boot. Neither the upload path nor the editor looked at line length, so the file the user saved was not the configuration the switch would come up with. Reject such a body in config_take(), before the sector is erased, which the upload path already maps to 400. The editor points at the offending line and its length, and measures it in bytes rather than characters, so a name written in a non-ASCII script is counted the way the switch counts it.
1.2 KiB
1.2 KiB
Change Log
[0.x] - 2026-xx-XX
Added
- Web UI
- Compress the embedded assets (minify + gzip) and switch to a single-page layout. #315
- Replace the multi-page UI with a themed single-page app: light, dark and Selenized themes following the browser by default, English, Japanese and Chinese, save to flash merges the command log into the startup config and verifies the write, firmware images are checked in the browser before upload. #429
Changed
Fixed
- Config
- A startup configuration line longer than the command buffer no longer stops the replay: the offending line is skipped and the following lines are still applied.
- The web UI and the configuration upload now refuse a line the replay cannot take, instead of writing it to flash.
Breaking changes
- Config
- VLAN don't accept port
u-suffix anymore. Sovlan 1 4uis not valid anymore. Replace it withvlan 1 4.
- VLAN don't accept port
- Commands
- port zero/
0is treated as theCPU_PORT. #326 - Many commands don't accept the CPU_PORT anymore. See #334.
When the CPU_PORT is needed, the command/service will add the CPU_PORT automaticly.
Only
isolateaccept the CPU_PORT as destination port.
- port zero/
[v0.1_aplha] - 2025-11-03
First release.