#include "machine_defs.h"

__code const struct machine machine = {
	.machine_name = MACHINE_MODEL,
	.isRTL8373 = 0,
	.min_port = 3,
	.max_port = 8,
	.n_sfp = 2,
	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},

	/* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
	.sfp_port[0].pin_los = GPIO37,
	.sfp_port[0].pin_tx_disable = GPIO_NA,
	.sfp_port[0].sds = 1,
	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),

	/* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
	.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
	.sfp_port[1].pin_tx_disable = GPIO_NA,
	.sfp_port[1].sds = 0,
	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),

	.reset_pin = GPIO_NA,

	/* These don't appear to be populated / wired-up; the power LED is always on */
	.high_leds = { 0 },

	/* Copper ports use SET0; SFP ports use SET1 */
	.port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},

	.led_sets = {
		{	/* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
			0,
			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
			0
		},
		{	/* SET1: SFP — all speeds link/act */
			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
			0,
			0,
			0
		},
	},

	.led_mux_custom = 1,
	.led_mux = {
		0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,  /* GPIO0-7: unused */
		0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12,        /* GPIO8-14 */
		0x14, 0x15, 0x16, 0x18, 0x19, 0x1a,              /* GPIO15-20 */
		0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23         /* GPIO21-27 */
	},
};