Switch Configuration

Settings

Port Configuration

Port Name Current Link SpeedConnected devicesSet SpeedDisabledApply

Configure Maximum Frame Size (MTU) forwarded at Port

Port Statistics

Port Name link TX Good TX Bad RX Good RX Bad All Counters

VLAN Configuration







Tagged Ports

Untagged Ports

Use as default VLAN for incoming traffic (PVID)


Configured VLANs

VLAN Name Member Ports Tagged Ports Untagged Ports PVID Ports Delete

L2 Configuration

Shown: -

Port
 MAC
 VLAN
 Type
 Remove Entry

Spanning Tree (RSTP)

Mode:

Bridge settings

PriorityVersionHello [s]Max age [s]Fwd delay [s]Tx hold

Changes apply immediately. Edge ports skip the listen period; guard/filter act on received BPDUs.

Port configuration

PortStatePath Cost
(0 = Auto)		PriorityEdge PortBPDU FilterGuardPoint-to-Point

Port status

PortPort StateRoleDesignated BridgeDesignated Port IDDesignated CostOper. EdgeOper. P2P

Mirror Configuration


Mirrored Ports (TX)


Mirrored Ports (RX)


Link Aggregation Groups Configuration

LAG 1


LAG 2


LAG 3


LAG 4

EEE Status

Advertising Link-Partner advertises
Port 2.5G 1G 100M 2.5G 1G 100M Active?

Ingress and Egress Bandwidth

Ingress Egress
Port Limit Bandwidth [kBit/s] Flow Control Limit Bandwidth [kBit/s] Apply

System Settings

-

When updating the above settings, remember to point your browser to the new IP afterwards:


Save all current settings to Flash:

Advanced Settings



Be careful when saving the directly edited startup configuration, you can lock yourself out:


Console Command




Be careful when entering console commands, you can lock yourself out!


      

    


    

      
Firmware Update

      

        
        Choose a firmware update file to upload: