#include "machine_defs.h"

__code const struct machine machine = {
	.machine_name = MACHINE_MODEL,
	.isRTL8373 = 0,
	.min_port = 3,
	.max_port = 8,
	.n_sfp = 2,
	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
	// Left SFP port (5)
	// LED pin 9
	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
	.sfp_port[0].pin_los = GPIO37,
	.sfp_port[0].pin_tx_disable = GPIO_NA,
	.sfp_port[0].sds = 1,
	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
	// Right SFP port (6)
	// LED pin 24
	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
	.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
	.sfp_port[1].pin_tx_disable = GPIO_NA,
	.sfp_port[1].sds = 0,
	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
	.reset_pin = GPIO_NA,
	.high_leds = { .mux =  LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
	.led_sets = {
			{
				// RJ45 Amber LED (left)
				LEDS_2G5 | LEDS_LINK,
				// RJ45 Green LED (Right)
				LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
				0,
				0,
			},
			{
				// SFP LED
				LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
				0, // unused
				0, // unused
				0
			},
		},
	.led_mux_custom = 1,
	.led_mux = {
		0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x0f, 0x20, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, 0x1c, 0x1d, 0x1e, 0x0c, 0x21, 0x22, 0x23
	},
};