#include "machine_defs.h"
__code const struct machine machine = {
	MACHINE_COMMON_SETTING,
	.n_sfp = 2,
	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
	.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
	// Left SFP port (5)
	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
	.sfp_port[0].pin_los = GPIO_NA,
	.sfp_port[0].pin_tx_disable = GPIO_NA,
	.sfp_port[0].sds = 1,
	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
	// Right SFP port (6)
	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
	.sfp_port[1].pin_los = GPIO_NA,
	.sfp_port[1].pin_tx_disable = GPIO_NA,
	.sfp_port[1].sds = 0,
	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
	.reset_pin = GPIO_NA,
	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
	/* On Ethernet: Left led is orange, right green
	 * 100M and 1G give right led green with activity
	 * 2.5GBit adds solid left orange LED
	 * LEDs for the SFP-ports are the same as for the Ethernet ports
	*/
	.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT,
			0,
			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
			LEDS_2G5 | LEDS_LINK | LEDS_ACT
		      },
		      { LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M |
			LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
			LEDS_1G | LEDS_LINK,
			LEDS_LINK,
			LEDS_COL | LEDS_DUPLEX
		      }
		    }
};