gitproxy/RTLPlayground
1
0
Fork 0
mirror of https://github.com/logicog/RTLPlayground.git synced 2026-08-30 14:52:51 +08:00
Code Issues Packages Projects Releases Wiki Activity

Compare commits

base: gitproxy/RTLPlayground:52cf759bece38bd95307d8a8437443b562ade8ce
Branches Tags
gitproxy/RTLPlayground:main gitproxy/RTLPlayground:rtl8221b_100m_support gitproxy/RTLPlayground:2x10g gitproxy/RTLPlayground:revert-252-main gitproxy/RTLPlayground:sfp_speed gitproxy/RTLPlayground:chacha20 gitproxy/RTLPlayground:dhcpd gitproxy/RTLPlayground:ZX_SWTGW215AS gitproxy/RTLPlayground:multcon
gitproxy/RTLPlayground:v0_1_alpha
..
compare: gitproxy/RTLPlayground:ZX_SWTGW215AS
Branches Tags
gitproxy/RTLPlayground:main gitproxy/RTLPlayground:rtl8221b_100m_support gitproxy/RTLPlayground:2x10g gitproxy/RTLPlayground:revert-252-main gitproxy/RTLPlayground:sfp_speed gitproxy/RTLPlayground:chacha20 gitproxy/RTLPlayground:dhcpd gitproxy/RTLPlayground:ZX_SWTGW215AS gitproxy/RTLPlayground:multcon
gitproxy/RTLPlayground:v0_1_alpha
9 Commits
52cf759bec .. ZX_SWTGW215AS
Author SHA1 Message Date
logicog 347950ff72 Add support for the ZX_SWTGW215AS device built by Hasivo 
The device is sold under the name ZX_SWTGW215AS without necessarily
a Hasivo branding, however the firmware and the PCB are marked with
Hasivo. The PCB is marked Hasivo RTL_SGT-1SX V1.5

SoC: RTL8372
Ethernet: 5 x 2.5GBit (RTL8221B + 4*SoC)
SFP+: 1x 10GBit (SoC)

The device has a slider switch and a reset button.
Reset: GPIO 54 (active-low)
Slider: GPIO 51 (right is high)
 2026-02-06 07:19:12 +01:00
logicog 0bccfbd11f Add LED-pad mapping 2026-02-05 19:41:28 +01:00
logicog 360bc1e86d Use generic led configuration 2026-02-03 19:24:36 +01:00
logicog 5b385385de Add LED configuration in machine profile 2026-02-01 22:15:12 +01:00
logicog ea23dfedc5 Add generic LED configuration support 2026-02-01 22:15:12 +01:00
logicog 34a32fa7e8 Reduce DSEG usage as we need 1 OSEG byte 2026-02-01 22:15:12 +01:00
logicog 06930df7c6 Remove debug output 2026-02-01 22:15:12 +01:00
logicog df058dfe33 LED configuration support 2026-02-01 22:15:12 +01:00
logicog 45213b4eac Add MACHINE_HG0402XG_V1_1 2026-02-01 22:15:12 +01:00
170 changed files with 1819 additions and 9325 deletions
Expand all files Collapse all files
.dockerignore
-19
View File
@@ -1,19 +0,0 @@
.git/
.gitignore
.gitattributes
.github/
output/
installer/output/
*.bin
html_data.c
html_data.h
*.o
*.rel
*.lst
*.sym
*.asm
*.ihx
*.img
*.map
*.mem
*.lk
.github/workflows/build.yml
+1 -3
View File
@@ -17,7 +17,5 @@ jobs:
run: | run: |
apt update apt update
apt install make gcc sdcc xxd python-is-python3 libjson-c-dev -y apt install make gcc sdcc xxd python-is-python3 libjson-c-dev -y
- name: Check if machine.c can be compiled for all machines
run: make machine_check
- name: Make project - name: Make project
run: make MACHINE="KP_9000_6XHML_X2" run: make
Dockerfile
-19
View File
@@ -1,19 +0,0 @@
FROM debian:13-slim
RUN apt-get update && apt-get install -y \
make \
gcc \
sdcc \
xxd \
python3 \
libjson-c-dev \
golang-go \
git \
&& rm -rf /var/lib/apt/lists/*
# git safe.directory for mounted repos (Makefile uses git describe)
RUN git config --global --add safe.directory /workspace
WORKDIR /workspace
CMD ["bash"]
Makefile
+37 -110
View File
@@ -1,101 +1,38 @@
BOOTLOADER_ADDRESS=0x100
VERSION=0.1.0 VERSION=0.1.0
IMAGESIZE = 524288 IMAGESIZE = 524288
DEFAULT_CONFIG_LOCATION = 454656
CONFIG_LOCATION = 458752 CONFIG_LOCATION = 458752
HTML_LOCATION = 262144 HTML_LOCATION = 262144
ifeq ($(origin CC),default)
CC = sdcc CC = sdcc
endif
CC_FLAGS = -mmcs51 -I. -Ihttpd -Iuip CC_FLAGS = -mmcs51 -I. -Ihttpd -Iuip
ASM ?= sdas8051 ASM = sdas8051
AFLAGS= -plosgff AFLAGS= -plosgff
SUBDIRS := tools SUBDIRS := tools uip httpd
SUBDIRSCLEAN=$(addsuffix clean,$(SUBDIRS)) SUBDIRSCLEAN=$(addsuffix clean,$(SUBDIRS))
ifeq ($(MACHINE),) BUILDDIR = output/
MACHINE:= $(shell grep "^\s*#define MACHINE_" machine.h | sed "s/^\s*#define MACHINE_//")
else
CC_FLAGS += -DMACHINE_$(MACHINE)
endif
BUILDDIR = output/$(MACHINE)
VERSION_HEADER := version.h VERSION_HEADER := version.h
GIT_VERSION := $(shell git rev-parse --short HEAD) all: create_build_dir $(VERSION_HEADER) $(SUBDIRS) $(BUILDDIR)rtlplayground.bin
ifeq ($(shell git status --porcelain --untracked-files=no),)
else
GIT_VERSION := $(GIT_VERSION)-dirty
endif
VERSION_EXTENSION = v$(VERSION)-$(GIT_VERSION)
FILENAME_EXTENSION = $(VERSION_EXTENSION)-$(MACHINE)
# Deterministic build date: honor SOURCE_DATE_EPOCH, else the HEAD commit date,
# else wall-clock (no-git fallback). Keeps same-commit builds byte-identical
# (BUILD_DATE is baked into the image and covered by the trailing CRC).
SOURCE_DATE_EPOCH ?= $(shell git show -s --format=%ct HEAD 2>/dev/null)
ifeq ($(SOURCE_DATE_EPOCH),)
BUILD_DATE := $(shell date +"%Y-%m-%d %H:%M:%S")
else
BUILD_DATE := $(shell date -u -d @$(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S" 2>/dev/null \
|| date -u -r $(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S")
endif
all: create_build_dir $(VERSION_HEADER) $(SUBDIRS) $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin
create_build_dir: create_build_dir:
mkdir -p "$(BUILDDIR)" mkdir -p $(BUILDDIR)
mkdir -p "$(BUILDDIR)/uip"
mkdir -p "$(BUILDDIR)/httpd"
# Keep machine.c in first position to fail immediately on invalid $MACHINE value SRCS = rtlplayground.c rtl837x_flash.c rtl837x_leds.c rtl837x_phy.c rtl837x_port.c cmd_parser.c html_data.c rtl837x_igmp.c rtl837x_stp.c rtl837x_pins.c dhcp.c machine.c
SRCS = \ OBJS = ${SRCS:%.c=$(BUILDDIR)%.rel}
machine.c \ OBJS += uip/$(BUILDDIR)/timer.rel uip/$(BUILDDIR)/uip-fw.rel uip/$(BUILDDIR)/uip-neighbor.rel uip/$(BUILDDIR)/uip-split.rel uip/$(BUILDDIR)/uip.rel uip/$(BUILDDIR)/uip_arp.rel uip/$(BUILDDIR)/uiplib.rel httpd/$(BUILDDIR)/httpd.rel httpd/$(BUILDDIR)/page_impl.rel
cmd_editor.c \
cmd_parser.c \
dhcp.c \
html_data.c \
rtlplayground.c \
syslog.c \
udp_apps.c
# RTL837x html_data.c html_data.h: html tools
SRCS += \ tools/$(BUILDDIR)fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -b BANK1 -d html -p html_data
rtl837x_bandwidth.c \
rtl837x_flash.c \
rtl837x_igmp.c \
rtl837x_init.c \
rtl837x_leds.c \
rtl837x_phy.c \
rtl837x_pins.c\
rtl837x_port.c \
rtl837x_stp.c
SRCS += \
httpd/httpd.c \
httpd/page_impl.c
SRCS += \
uip/timer.c \
uip/uip.c \
uip/uiplib.c \
uip/uip_arp.c \
uip/uip-fw.c \
uip/uip-neighbor.c \
uip/uip-split.c
OBJS = ${SRCS:%.c=$(BUILDDIR)/%.rel}
DEPS := ${SRCS:%.c=$(BUILDDIR)/%.d}
HTML := $(shell find html -name '*.js' -or -name '*.html' -or -name '*.svg')
html_data.c html_data.h &: $(HTML) | tools
tools/output/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -b BANK1 -d html -p html_data
$(VERSION_HEADER): $(VERSION_HEADER):
@printf '%s\n' "#ifndef VERSION_H" "#define VERSION_H" \ @echo "#ifndef VERSION_H" > $(VERSION_HEADER)
"#define VERSION_SW \"$(VERSION_EXTENSION)\"" \ @echo "#define VERSION_H" >> $(VERSION_HEADER)
"#define BUILD_DATE \"$(BUILD_DATE)\"" \ @echo "#define VERSION_SW \"v$(VERSION)-g$(shell git rev-parse --short HEAD)\"" >> $(VERSION_HEADER)
"#endif" > $(VERSION_HEADER) @echo "#endif" >> $(VERSION_HEADER)
httpd: html_data.h httpd: html_data.h
@@ -103,46 +40,36 @@ $(SUBDIRS):
$(MAKE) -C $@ $(MAKE) -C $@
clean: clean:
-rm -f html_data.c html_data.h $(VERSION_HEADER) -make -C uip clean
-if [ -d $(BUILDDIR) ]; then find $(BUILDDIR) -type f ! -name "*.bin" -delete; fi -make -C httpd clean
-rm html_data.c html_data.h $(VERSION_HEADER)
-rm -r $(BUILDDIR)
distclean: $(BUILDDIR)crtstart.rel: crtstart.asm
-rm -f html_data.c html_data.h $(VERSION_HEADER) $(ASM) $(AFLAGS) -o $@ $<
-rm -rf $(BUILDDIR)
$(BUILDDIR)/%.rel: %.c | create_build_dir html_data.h $(BUILDDIR)crc16.rel: crc16.asm
$(CC) -MMD $(CC_FLAGS) -o $@ -c $< $(ASM) $(AFLAGS) -o $@ $<
$(BUILDDIR)/%.rel: %.asm | create_build_dir $(BUILDDIR)%.rel: %.c
$(CC) $(CC_FLAGS) -o $@ -c $<
$(BUILDDIR)%.rel: $(BUILDDIR)%.asm
${ASM} ${AFLAGS} -o $@ $< ${ASM} ${AFLAGS} -o $@ $<
# mv -f $(addprefix $(basename $^), .lst .rel .sym) . # mv -f $(addprefix $(basename $^), .lst .rel .sym) .
$(BUILDDIR)/rtlplayground.ihx: $(OBJS) $(BUILDDIR)/crtbank.rel $(BUILDDIR)/crc16.rel $(BUILDDIR)rtlplayground.ihx: $(BUILDDIR)crtstart.rel $(OBJS) $(BUILDDIR)crc16.rel
$(CC) $(CC_FLAGS) -Wl-bHOME=0x00000 -Wl-bBANK1=0x14000 -Wl-bBANK2=0x24000 -Wl-r -o $@ $^ $(CC) $(CC_FLAGS) -Wl-bHOME=${BOOTLOADER_ADDRESS} -Wl-bBANK1=0x14000 -Wl-bBANK2=0x24000 -Wl-r -o $@ $^
$(BUILDDIR)/rtlplayground.img: $(BUILDDIR)/rtlplayground.ihx $(BUILDDIR)rtlplayground.img: $(BUILDDIR)rtlplayground.ihx
objcopy --input-target=ihex -O binary $< $@ objcopy --input-target=ihex -O binary $< $@
$(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin: $(BUILDDIR)/rtlplayground.img | tools $(BUILDDIR)rtlplayground.bin: $(BUILDDIR)rtlplayground.img
if [ -e $@ ]; then rm $@; fi if [ -e $@ ]; then rm $@; fi
tools/output/imagebuilder -i $^ $@ tools/$(BUILDDIR)imagebuilder -i $^ $@
tools/output/fileadder -a $(DEFAULT_CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@ tools/$(BUILDDIR)fileadder -a $(CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@
tools/output/fileadder -a $(CONFIG_LOCATION) -s $(IMAGESIZE) -d config.txt $@ tools/$(BUILDDIR)fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -d html -p html_data $@
tools/output/fileadder -a $(HTML_LOCATION) -s $(IMAGESIZE) -d html -p html_data -b BANK1 $@ tools/$(BUILDDIR)crc_calculator -u $@
tools/output/crc_calculator -u $@
ln -sf $(MACHINE)/rtlplayground-$(FILENAME_EXTENSION).bin output/rtlplayground.bin
.PHONY: clean all $(SUBDIRS) $(VERSION_HEADER) create_build_dir
.PHONY: .PHONY: clean all $(SUBDIRS)
machine_check:
@mkdir -p $(BUILDDIR)/tmp
@set -eo pipefail; \
for MACHINE in `grep -e ' MACHINE_' machine.c | sed -e 's%^.* MACHINE_%%' -e 's%[ ]*//.*$$%%' | sort -u`; \
do \
echo "Checking $${MACHINE}"; \
$(CC) $(CC_FLAGS) -DMACHINE_$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine.c; \
done
@rm -rf $(BUILDDIR)/tmp
-include $(DEPS)
README.md
+64 -182
View File
@@ -52,192 +52,96 @@ devices by looking at the image using e.g. Ghidra. If you want to contribute to
design of the web-interface or get a feeling for the interface first, a standalone design of the web-interface or get a feeling for the interface first, a standalone
device simulator is provided, which runs entirely under Linux as a local webserver. device simulator is provided, which runs entirely under Linux as a local webserver.
## (0) Compiling Requirements ## Compiling
Install the following particular build requisites (Debian 12/13), note that Ubuntu 24.04 Install the following particular build requisites (Debian 12/13), note that Ubuntu 24.04
still has an older version of sdcc, but you will need sdcc version 4.5 for the code to compile: still has an older version of sdcc, but you will need sdcc version 4.5 for the code to compile:
``` ```
sudo apt install make gcc sdcc xxd python-is-python3 libjson-c-dev sudo apt install sdcc xxd python-is-python3 libjson-c-dev
``` ```
<details>
<summary>If using Docker (click to expand)</summary>
### Prerequisites
Install Docker for your platform:
- **Linux (Debian/Ubuntu)**: `sudo apt install docker.io` then `sudo usermod -aG docker $USER` (log out and back in)
- **Linux (other distros)**: Follow the [Docker Engine install guide](https://docs.docker.com/engine/install/)
- **Windows**: Install [Docker Desktop for Windows](https://docs.docker.com/desktop/setup/install/windows-install/)
- **macOS**: Install [Docker Desktop for Mac](https://docs.docker.com/desktop/setup/install/mac-install/)
### Usage
A Dockerfile is provided for a reproducible build environment:
```
docker build -t rtlplayground-dev .
```
Build the firmware (replace MACHINE with your target, e.g. `DEFAULT_8C_1SFP`):
```
docker run --rm -v $(pwd):/workspace rtlplayground-dev make MACHINE=DEFAULT_8C_1SFP
```
The resulting `.bin` file appears in `output/` on your host.
Build host tools only:
```
docker run --rm -v $(pwd):/workspace rtlplayground-dev make -C tools
```
Run the web-interface simulator locally:
```
docker run --rm -p 8080:8080 -v $(pwd):/workspace rtlplayground-dev \
tools/output/httpd_sim /workspace/html
```
Edit `machine.h` or `config.txt` on your host, then re-run `make` — the
source directory is mounted into the container, so changes take effect
immediately. To build for a different machine, pass `MACHINE=...`.
</details>
## (1) Compiling for direct chip flashing AND upgrading an existing RTLPlayground running device
Edit machine.h with an editor like vi or nano. Select the correct machine the firmware should build for.
> [!TIP]
> You can write configuration parameters in config.txt (see below) in order your switch to get
> straight at the first boot, a correct IP configuration.
Now, building the firmware image should work: Now, building the firmware image should work:
``` ```
make $ make
sdas8051 -plosgff crtstart.asm
sdcc -mmcs51 -c rtlplayground.c
sdcc -mmcs51 -c rtl837x_flash.c
sdcc -mmcs51 -Wl-bHOME=0x100 -o rtlplayground.ihx crtstart.rel rtlplayground.rel rtl837x_flash.rel
objcopy --input-target=ihex -O binary rtlplayground.ihx rtlplayground.img
if [ -e rtlplayground.bin ]; then rm rtlplayground.bin; fi
echo "0000000: 00 40" | xxd -r - rtlplayground.bin
cat rtlplayground.img >> rtlplayground.bin
``` ```
Note, that the image generated ends in .bin, not .img, in order to make IMSProg happy. Note, that the image generated ends in .bin, not .img, in order to make
IMSProg happy.
image location is stored in `RTLPlayground/output/rtlplayground_version_machine.bin`
for example
```
rtlplayground-v0.1.0-12c98ba-dirty-LIANGUO_ZX_SWTGW215AS.bin
```
> [!CAUTION]
> This image can be flashed directly to the chip OR through the firmware update/upgrade
> interface of RTLPlaygound interface
## (2) Compiling for OEM running device with management options (web upgrade)
Managed switches can be updated from the existing original firmware using a SPECIFIC upgrade image.
You first need to build the firmware for direct chip flashing : See below (1)
Then
```
cd installer
make
```
image location is stored in `RTLPlayground/installer/output/rtlplayground_oem_upgrade.bin`
> [!CAUTION]
> This image must ONLY be used for original OEM firmware web interface firmware upgrade.
> You do not need this image if you are already on RTLplayground firmware.
> Unless you go back to the original OEM firmware, you would only flash this specific firmware
> only once. Future upgrades of RTLPlayground will only need to follow (1)
example of compilation console output
Managed switches can be updated from the existing original firmware using an upgrade image.
In the `installer`folder of the source code you will need to run `make` which will build
an image out of `rtlplayground.bin` built in the previous step:
``` ```
RTLPlayground/installer$ make RTLPlayground/installer$ make
mkdir -p output mkdir -p output/
gcc updatebuilder.c -o output/updatebuilder gcc updatebuilder.c -o output/updatebuilder
sdas8051 -plosgff -o output/crtstart.rel crtstart.asm sdas8051 -plosgff -o output/crtstart.rel crtstart.asm
sdcc -mmcs51 --code-loc 0x1000 -o output/installer.rel -c installer.c sdcc -mmcs51 --code-loc 0x1000 -o output/installer.rel -c installer.c
sdcc -mmcs51 -Wl-bHOME=0x1100 -Wl-r -o output/rtlinstaller.ihx output/crtstart.rel output/installer.rel sdcc -mmcs51 -Wl-bHOME=0x1100 -Wl-r -o output/rtlinstaller.ihx output/crtstart.rel output/installer.rel
./output/updatebuilder -i output/rtlinstaller.ihx -o output/rtlplayground_oem_upgrade.bin ../output/rtlplayground.bin cp ../output//rtlplayground.bin output/
./output//updatebuilder -i output/rtlinstaller.ihx output/rtlplayground.bin
Input file size: 524288 Input file size: 524288
Bytes read: 524288 Bytes read: 524288
EOF EOF
Payload sum 1 is: 0x25100 Payload sum 1 is: 0x29d10
Payload sum 2 is: 0x25100 Payload sum 2 is: 0x29d10
Payload sum with header is: 0x264ec Payload sum with header is: 0x2b0fc
Payload sum is: 0xf8fe94 Payload sum is: 0xad8a75
Header checksum is: 0x5a1 Header checksum is: 0x4c3
``` ```
The resulting image can be found in `RTLPlayground/installer/output/rtlplayground.bin`
> [!CAUTION]
> DO NOT UPLOAD THE UPGADE IMAGE UNLESS YOU CAN MAKE A BACKUP USING A SOIC CLAMP OF THE
> ORIGINAL FIRMWARE!
## (3) Sandbox Usage with Ghidra (optional) ## Installation
You can play with the image using ghidra or flash real Switch Hardware. For You can play with the image using ghidra or flash real Switch Hardware. For
ghidra see this information about [Ghidra images](ghidra.md). ghidra see this information about [Ghidra images](ghidra.md).
## (4) Installation through the Web interface (software way)
Managed switches (OEM firmware of RTLplaygroud firmware) can be upgraded via the web interface.
Unmanaged switch cannot be flashed this way (see 5).
Go to "Firmware update" tab, select the correct file.
> [!IMPORTANT]
> If your device already runs RTLPlayground, you must upload the binary file /RTLPlayground/output/rtlplayground_Version_Machine.bin
> If your device is OEM, you must upload the binary file /RTLPlayground/installer/outputrtlplayground_oem_upgrade.bin
> [!CAUTION] > [!CAUTION]
> Check one more time that your device matches the machine type before flashing. > NOTE THAT WHILE THIS PROCEDURE HAS BEEN SUCCESSFULLY TESTED ON ALL DEVICES ABOVE,
> Be shure you have a backup of the original firmware before diving in RTLPlaygroung. > ABSOLUTELY NO GUARANTY CAN BE GIVEN THAT YOU WILL NOT DESTROY YOUR SWITCH,
> ANY OTHER EQUIPMENT INVOLVED OR HARM YOURSELF BY OPENING THE ELECTRONIC
> DEVICE. OPENING THE SWITCH WILL VOID ITS WARRANTY.
Finally, push the Upload File Button and you're done ! You can upload the upgrade image of managed switches via the web interface of the
original firmware just as if you were installing a firmware upgrade. However,
this is strongly discouraged, as you may brick your device, unless you can make
firmware backups via a SOIC clamp or soldered flash socket, first!
For unmanaged devices, the only way to install RTLPlayground is by flashing the
Flash memory directly.
## (5) Flashing the ROM directly (hardware way, but also only way to rescue) You will need to open your switch to flash the image directly onto the flash chip,
which is done easiest using a SOIC-8 clip (alternatively you de-solder the
flash chip and install a SOIC adapter):
- Disconnect power from switch
- Attach the clip onto the flash chip
- Connect USB of flash programmer, the power LED on the switch will light
up, check cabling if not. Don't panic, mixing up GND and 3.3V does not
seem to destroy the switch (at leasts the on I did this to).
- Use IMSProg (flashrom should work, too) to detect the clip
- MAKE A BACKUP OF THE EXISTING FIRMWARE!
- then load the firmware into IMSProg
- and program flash
This procedure is the only way to flash unmanaged switches, if the ROM chip is large enough. Now you can connect a serial cable to the UART port found on all the
This is also the only way to unbrick your device if something went wroong. devices, set 8N1 @ 115200 baud and power up the switch.
> [!IMPORTANT] The device will perform some examples and provide a minimal console, the
> You need a SOIC-8 clip to flash the ROM chip directly onboard. documentation of which can be found in the source code rtlplayground.c`.
> Alternatively you can de-solder the flash chip and install a SOIC adapter).
> For flashing the chip directly, you must use the binary file /RTLPlayground/output/rtlplayground_Version_Machine.bin
> [!CAUTION] ## The web-interface
> As you need to open your switch case, consider that the warranty is gone. The web-interface can be reached under the [default 192.168.10.247](http://192.168.10.247).
The default password is `1234`.
- Disconnect power from switch.
- Open the switch.
- Attach the clip onto the flash chip (Red line on Pin 1, Pin 1 has a point marker).
- Connect USB of flash programmer, the power LED on the switch will light up, check cabling if not.
- Don't panic, mixing up GND and 3.3V usually does not destroy the switch.
- Use IMSProg, Flashrom, or whatever Programmer to detect the chip.
- MAKE A BACKUP (DUMP) OF THE EXISTING FIRMWARE !
- ERASE THE ROM (BLANK) !
- Load the firmware into IMSProg.
- Flash is to the ROM chip.
- Disconect the clip from the ROM chip.
- You're done, ready for the first boot.
## (6) Connecting a serial interface (optional)
You can connect a serial cable to the UART port found on all the devices, set 8N1 @ 115200 baud.
## (7) Power Up
When you power up the switch, the device will perform some examples and provide a minimal console
(if wired to a serial interface), the documentation of which can be found in the source code rtlplayground.c`.
## (8) The web-interface
The web-interface can be reached under the [default 192.168.10.247](http://192.168.10.247) unless you
specified an IP adress in the config.txt before compilation.
> [!TIP]
> The default password is `1234`.
## (9) The command line
## The command line
The command line is very rudimentary and mostly for testing purposes. The command line is very rudimentary and mostly for testing purposes.
The following is a boot-log with some examples: The following is a boot-log with some examples:
``` ```
@@ -302,6 +206,7 @@ PORT 04 1G
<MODULE INSERTED> Rate: 67 Encoding: 01 <MODULE INSERTED> Rate: 67 Encoding: 01
Lightron Inc. WSPXG-ES3LC-IHA 0000 Lightron Inc. WSPXG-ES3LC-IHA 0000
> stat > stat
CMD: stat CMD: stat
Port State Link TxGood TxBad RxGood RxBad Port State Link TxGood TxBad RxGood RxBad
@@ -319,40 +224,17 @@ Lightron Inc. WSPXG-ES3LC-IHA 0000
CMD: sfp CMD: sfp
Rate: 67 Encoding: 01 Rate: 67 Encoding: 01
Lightron Inc. WSPXG-ES3LC-IHA 0000 Lightron Inc. WSPXG-ES3LC-IHA 0000
```
## (10) Advanced configuration
You can configure more deeply the switch without the need of the console mode.
While in compilation part, you might write directly to config.txt file before making the binary firmware
``` ```
nano config.txt
```
If you want to modify settings after the flash is done, go to the Advanced Settings tab in System Settings
<img width="1085" height="646" alt="ADVANCED SETTINGS" src="doc/images/advanced_settings.png" />
```
ip xxx.xxx.xxx.xxx = IP adress of the switch
gw yyy.yyy.yyy.yyy = IP adress of the gateway
netmask zzz.zzz.zzz.zzz = Network mask of the switch
port x name xxx = Name xxx the port number x
port z 1g = Set 1g speed for port z
igmp on/off = Turn IGMP on or off
```
[To be continue]
Enjoy playing! Enjoy playing!
## (11) Other documents ## Other documents
The following documents give further documentation on specific features of
The following documents give further documentation on specific features of the RTL837x SoCs: the RTL837x SoCs:
- [RTL8372/3 Feature support](doc/hardware.md) - [RTL8372/3 Feature support](doc/hardware.md)
- [CPU Port](doc/CpuPort.md) - [CPU Port](doc/CpuPort.md)
- [L2 learning](doc/l2.md) - [L2 learning](doc/l2.md)
- [CPU Port](doc/CpuPort.md)
- [IGMP (IP-MC streaming)](doc/igmp.md) - [IGMP (IP-MC streaming)](doc/igmp.md)
- [SFP+ ports](doc/sfp.md) - [SFP+ ports](doc/sfp.md)
- [Trunking aka. port aggregation](doc/trunking.md) - [Trunking aka. port aggregation](doc/trunking.md)
cmd_editor.c
-211
View File
@@ -1,211 +0,0 @@
#include "cmd_parser.h"
#include "machine.h"
#pragma codeseg BANK2
#pragma constseg BANK2
// Position in the serial buffer
__xdata uint8_t l;
// Properties of currently edited command line in cmd_buffer[CMD_BUF_SIZE]
__xdata uint8_t cursor;
__xdata uint8_t cmd_line_len;
__xdata uint8_t current_cmdline[CMD_BUF_SIZE];
__xdata uint16_t history_editptr;
extern __xdata uint8_t cmd_history[CMD_HISTORY_SIZE];
extern __xdata uint16_t cmd_history_ptr;
void cmd_editor_init(void) __banked
{
l = sbuf_ptr; // We have printed out entered characters until l
cursor = 0;
cmd_line_len = 0;
cmd_available = 0;
history_editptr = 0xffff;
}
/*
* Allows editing the current command line held in cmd_buffer[CMD_BUF_SIZE] by
* identifying new characters typed or up to 4-byte escape sequences in the
* serial buffer ring sbuf[SBUF_SIZE].
* Upon detecting new characters or escape sequences, the cmd_buffer and the
* representation of the command line in the terminal are updated.
* To debug, the easist is to interpose a tty-interceptor between the physical
* serial device and a logical one created by interceptty:
* sudo interceptty -s 'ispeed 115200 ospeed 115200' /dev/ttyUSB0 /dev/tmpS
* picocom -b 115200 /dev/tmpS
*/
void cmd_edit(void) __banked
{
while (l != sbuf_ptr) {
if (sbuf[l] >= ' ' && sbuf[l] < 127) { // A printable character, copy to command line
// Reserve one byte for the terminating NUL written on Enter. When the
// line is full, drop the character but still fall through to advance the
// serial-ring read pointer below; a 'continue' here would spin forever.
if (cmd_line_len < CMD_BUF_SIZE - 1) {
write_char(sbuf[l]);
// Shift buffer to right
for (uint8_t i = cmd_line_len; i > cursor; i--)
cmd_buffer[i] = cmd_buffer[i-1];
// Insert char in comand buffer
cmd_buffer[cursor++] = sbuf[l];
cmd_line_len++;
// Print rest of line
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char(cmd_buffer[i]);
// Move backwards
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char('\010'); // BS works like cursor-left
}
} else if (sbuf[l] == '\033') { // ESC-Sequence
// Wait until we have at least 3 characters including the ESC character in the serial buffer
if (((sbuf_ptr + SBUF_SIZE - l) & SBUF_MASK) < 3)
continue;
if (((sbuf_ptr > l ? sbuf_ptr - l : SBUF_SIZE + sbuf_ptr - l) >= 4)
&& sbuf[l] == '\033' && sbuf[(l + 1) & SBUF_MASK] == '[' && sbuf[(l + 2) & SBUF_MASK] == '3' && sbuf[(l + 3) & SBUF_MASK] == '~') { // DEL
if (cursor < cmd_line_len) {
write_char('\033'); write_char('['); write_char('1'); write_char('P'); // Delete to end of line
cmd_line_len--;
for (uint8_t i = cursor; i < cmd_line_len; i++) {
cmd_buffer[i] = cmd_buffer[i+1];
write_char(cmd_buffer[i]);
}
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char('\010');
}
l += 4;
l &= SBUF_MASK;
continue;
} else if (sbuf[l] == '\033' && sbuf[(l + 1) & SBUF_MASK] == '[' && sbuf[(l + 2) & SBUF_MASK] == 'D') { // <CURSOR-LEFT>
if (cursor) {
write_char('\010'); // BS works like cursor-left
cursor--;
}
l += 3;
l &= SBUF_MASK;
continue;
} else if (sbuf[l] == '\033' && sbuf[(l + 1) & SBUF_MASK] == '[' && sbuf[(l + 2) & SBUF_MASK] == 'C') { // <CURSOR-RIGHT>
if (cursor < cmd_line_len) {
write_char('\033'); write_char('['); write_char('C');
cursor++;
}
l += 3;
l &= SBUF_MASK;
continue;
} else if (sbuf[l] == '\033' && sbuf[(l + 1) & SBUF_MASK] == '[' && sbuf[(l + 2) & SBUF_MASK] == 'A') { // <CURSOR-UP>
for (uint8_t i = 0; i < cmd_line_len; i++)
current_cmdline[i] = cmd_buffer[i];
current_cmdline[cmd_line_len] = 0;
__xdata uint16_t p;
if (history_editptr == 0xffff)
p = (cmd_history_ptr - 2) & CMD_HISTORY_MASK;
else
p = history_editptr;
// Move cursor to beginning of line
write_char('\033'); write_char('['); itoa(cursor + 2); write_char('D');
cursor = 0;
while (cmd_history[p] && cmd_history[p] != '\n') {
cursor++;
p--;
p &= CMD_HISTORY_MASK;
}
history_editptr = (p - 1) & CMD_HISTORY_MASK;
p = (p + 1) & CMD_HISTORY_MASK;
if (cursor) {
print_string("\033[2K> "); // Clear entire line: ^[[2K and print new prompt
for (uint8_t i = 0; i < cursor; i++) {
cmd_buffer[i] = cmd_history[p];
write_char(cmd_buffer[i]);
p = (p+1) & CMD_HISTORY_MASK;
}
cmd_line_len = cursor;
} else {
print_string("\033[2C"); // Move 2 right to start of editing space
}
l += 3;
l &= SBUF_MASK;
continue;
} else if (sbuf[l] == '\033' && sbuf[(l + 1) & SBUF_MASK] == '[' && sbuf[(l + 2) & SBUF_MASK] == 'B') { // <CURSOR-DOWN>
if (history_editptr != 0xffff) {
__xdata uint16_t p = (history_editptr + 2) & CMD_HISTORY_MASK;
// Move cursor to beginning of line
write_char('\033'); write_char('['); itoa(cursor + 2); write_char('D');
print_string("\033[2K> "); // Clear entire line: ^[[2K and print new prompt
uint8_t i = 0;
while (cmd_history[p] && cmd_history[p] != '\n') {
p = (p + 1) & CMD_HISTORY_MASK;
}
p = (p + 1) & CMD_HISTORY_MASK;
while (cmd_history[p] && cmd_history[p] != '\n') {
cmd_buffer[i] = cmd_history[p];
write_char(cmd_buffer[i++]);
p = (p + 1) & CMD_HISTORY_MASK;
}
history_editptr = (p - 1) & CMD_HISTORY_MASK;
if (!i) {
if (current_cmdline[i]) {
while (current_cmdline[i]) {
cmd_buffer[i] = current_cmdline[i];
write_char(cmd_buffer[i++]);
}
} else {
write_char('\033'); write_char('['); write_char('C');
}
history_editptr = 0xffff;
// Move cursor right
}
cmd_line_len = i;
cursor = 0;
// Move cursor again to beginning of line
write_char('\033'); write_char('['); itoa(i); write_char('D');
} else {
// If we are at the last entry of the history, just move the cursor to the end of the line
if (cursor < cmd_line_len) {
write_char('\033'); write_char('['); itoa(cmd_line_len - cursor); write_char('C');
}
cursor = cmd_line_len;
}
l += 3;
l &= SBUF_MASK;
continue;
} else { // An unknown or not yet complete Escape sequence: wait
continue;
}
} else if (sbuf[l] == 127 || sbuf[l] == 8) { // Backspace DEL or BS/^H
if (cursor > 0) {
write_char('\010');
for (uint8_t i = cursor; i < cmd_line_len; i++)
write_char(cmd_buffer[i]);
write_char(' '); // Overwrite end of line
// Move backwards n steps:
for (uint8_t i = cursor; i <= cmd_line_len; i++)
write_char('\010');
cursor--;
for (uint8_t i = cursor; i <= cmd_line_len; i++)
cmd_buffer[i] = cmd_buffer[i+1];
cmd_line_len--;
}
}
// If the command buffer is currently in use, we cannot copy to it
if (cmd_available)
break;
// Check whether return was pressed:
if (sbuf[l] == '\n' || sbuf[l] == '\r') {
write_char('\n');
cmd_buffer[cmd_line_len] = '\0';
// write_char('>'); print_string_x(cmd_buffer); write_char('<');
// If there is a command we print the prompt after execution
// otherwise immediately because there is nothing to execute
if (cmd_line_len)
cmd_available = 1;
else
print_cmd_prompt();
cursor = 0;
cmd_line_len = 0;
history_editptr = 0xffff;
}
l++;
l &= SBUF_MASK;
}
}
cmd_editor.h
-9
View File
@@ -1,9 +0,0 @@
#ifndef _CMD_EDITOR_H_
#define _CMD_EDITOR_H_
#include <stdint.h>
void cmd_editor_init(void) __banked;
void cmd_edit(void) __banked;
#endif
cmd_parser.c
+267 -1038
View File
File diff suppressed because it is too large Load Diff
cmd_parser.h
+2 -6
View File
@@ -5,15 +5,11 @@
#include "rtl837x_common.h" #include "rtl837x_common.h"
extern __xdata uint8_t cmd_buffer[CMD_BUF_SIZE]; extern __xdata uint8_t cmd_buffer[SBUF_SIZE];
extern __xdata uint8_t cmd_available; extern __xdata uint8_t cmd_available;
extern __xdata uint8_t err_status;
void cmd_tokenize(void) __banked; uint8_t cmd_tokenize(void) __banked;
void cmd_parser(void) __banked; void cmd_parser(void) __banked;
void execute_config(void) __banked; void execute_config(void) __banked;
void execute_commands(__xdata uint8_t *p) __banked;
void print_sw_version(void) __banked; void print_sw_version(void) __banked;
void clear_command_history(void) __banked;
#endif #endif
crtbank.asm
-29
View File
@@ -1,29 +0,0 @@
.area HOME (CODE)
.area GSINIT0 (CODE)
.area GSINIT1 (CODE)
.area GSINIT2 (CODE)
.area GSINIT3 (CODE)
.area GSINIT4 (CODE)
.area GSINIT5 (CODE)
.area GSINIT (CODE)
.area GSFINAL (CODE)
.area CSEG (CODE)
.area HOME (CODE)
__sdcc_banked_call::
push _PSBANK
xch a,r0
push a
mov a,r1
push a
mov a,r2
anl a,#0x1f
mov _PSBANK, a
xch a, r0
ret
__sdcc_banked_ret::
pop _PSBANK
ret
crtstart.asm
+57
View File
@@ -0,0 +1,57 @@
.globl __start__stack
;--------------------------------------------------------
; Stack segment in internal ram
;--------------------------------------------------------
.area SSEG (DATA)
__start__stack:
.ds 1
.area VECTOR (CODE)
.globl __interrupt_vect
__interrupt_vect:
ljmp __sdcc_gsinit_startup
ljmp _isr_ext0 ; 0x03
.ds 5
ljmp _isr_timer0 ; 0x0b
.ds 5
ljmp _isr_ext1 ; 0x13
.ds 5
reti ; 0x1b TIMER 1 IRQ
.ds 7
ljmp _isr_serial ; 0x23
.ds 5
ljmp _isr_timer2 ; 0x2b TIMER 2 IRQ
.ds 5
reti ; 0x33 NOT used by DW8051
.ds 7
reti ; 0x3b Serial port 1 RX/TX IRQ
.ds 7
ljmp _isr_ext2 ; 0x43
.ds 5
ljmp _isr_ext3 ; 0x4b
.globl __start__stack
.area GSINIT0 (CODE)
__sdcc_gsinit_startup::
mov sp,#__start__stack - 1
.area GSFINAL (CODE)
ljmp _bootloader
__sdcc_banked_call::
push _PSBANK
xch a,r0
push a
mov a,r1
push a
mov a,r2
anl a,#0x1f
mov _PSBANK, a
xch a, r0
ret
__sdcc_banked_ret::
pop _PSBANK
ret
dhcp.c
+13 -26
View File
@@ -12,6 +12,7 @@
#include "uip.h" #include "uip.h"
#include "uip/uip.h" #include "uip/uip.h"
extern __code struct uip_eth_addr uip_ethaddr;
__xdata struct dhcp_state dhcp_state; __xdata struct dhcp_state dhcp_state;
__xdata uip_ipaddr_t server; __xdata uip_ipaddr_t server;
@@ -41,7 +42,6 @@ __xdata uip_ipaddr_t server;
#define DHCP_REBIND_LEN 4 #define DHCP_REBIND_LEN 4
#define DHCP_CLIENT_ID 61 #define DHCP_CLIENT_ID 61
#define DHCP_CLIENT_ID_LEN 7 #define DHCP_CLIENT_ID_LEN 7
#define DHCP_HOSTNAME 12
#define DHCP_REQUEST_IP 50 #define DHCP_REQUEST_IP 50
#define DHCP_REQUEST_IP_LEN 4 #define DHCP_REQUEST_IP_LEN 4
#define DHCP_PARAMS 55 #define DHCP_PARAMS 55
@@ -72,13 +72,18 @@ struct dhcp_pkt {
uint8_t cookie[4]; uint8_t cookie[4];
}; };
/*
#define DHCP_P ((__xdata struct dhcp_pkt *)&uip_buf[RTL_TAG_SIZE + VLAN_TAG_SIZE])
#define DHCP_OPT ((__xdata uint8_t *)&uip_buf[RTL_TAG_SIZE + VLAN_TAG_SIZE + sizeof (struct dhcp_pkt)])
*/
#define DHCP_P ((__xdata struct dhcp_pkt *)uip_appdata) #define DHCP_P ((__xdata struct dhcp_pkt *)uip_appdata)
#define DHCP_OPT ((__xdata uint8_t *)(uip_appdata) + sizeof (struct dhcp_pkt)) #define DHCP_OPT ((__xdata uint8_t *)(uip_appdata) + sizeof (struct dhcp_pkt))
__xdata uint32_t long_value; __xdata uint32_t long_value;
void dhcp_print_ip(__xdata uint8_t *a) void dhcp_print_ip(uint8_t *a)
{ {
itoa(a[0]); write_char('.'); itoa(a[0]); write_char('.');
itoa(a[1]); write_char('.'); itoa(a[1]); write_char('.');
@@ -99,7 +104,7 @@ void dhcp_prepare_request(void)
DHCP_P->flags = 0; DHCP_P->flags = 0;
// Clear fields client_ip to bootp_file // Clear fields client_ip to bootp_file
memset(DHCP_P->client_ip, 0, 224); memset(DHCP_P->client_ip, 0, 224);
memcpy(DHCP_P->client_addr, uip_ethaddr.addr, 6); memcpyc(DHCP_P->client_addr, uip_ethaddr.addr, 6);
DHCP_P->cookie[0] = 0x63; DHCP_P->cookie[0] = 0x63;
DHCP_P->cookie[1] = 0x82; DHCP_P->cookie[1] = 0x82;
DHCP_P->cookie[2] = 0x53; DHCP_P->cookie[2] = 0x53;
@@ -112,25 +117,11 @@ void dhcp_addopt_client_id(void)
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_CLIENT_ID; DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_CLIENT_ID;
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_CLIENT_ID_LEN; DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_CLIENT_ID_LEN;
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_HW_TYPE_ETH; DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_HW_TYPE_ETH;
memcpy(&DHCP_OPT[dhcp_state.opt_ptr], uip_ethaddr.addr, 6); memcpyc(&DHCP_OPT[dhcp_state.opt_ptr], uip_ethaddr.addr, 6);
dhcp_state.opt_ptr += 6; dhcp_state.opt_ptr += 6;
} }
void dhcp_addopt_hostname(void)
{
uint8_t len = 0;
while (hostname[len])
len++;
if (!len)
return;
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_HOSTNAME;
DHCP_OPT[dhcp_state.opt_ptr++] = len;
memcpy(&DHCP_OPT[dhcp_state.opt_ptr], hostname, len);
dhcp_state.opt_ptr += len;
}
void dhcp_addopt_request_ip(void) void dhcp_addopt_request_ip(void)
{ {
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_REQUEST_IP; DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_REQUEST_IP;
@@ -139,7 +130,7 @@ void dhcp_addopt_request_ip(void)
DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.current_ip[1]; DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.current_ip[1];
DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.current_ip[2]; DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.current_ip[2];
DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.current_ip[3]; DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.current_ip[3];
memcpy(&DHCP_OPT[dhcp_state.opt_ptr], uip_ethaddr.addr, 4); memcpyc(&DHCP_OPT[dhcp_state.opt_ptr], uip_ethaddr.addr, 4);
} }
@@ -151,7 +142,7 @@ void dhcp_addopt_server_id(void)
DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.server[1]; DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.server[1];
DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.server[2]; DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.server[2];
DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.server[3]; DHCP_OPT[dhcp_state.opt_ptr++] = dhcp_state.server[3];
memcpy(&DHCP_OPT[dhcp_state.opt_ptr], uip_ethaddr.addr, 4); memcpyc(&DHCP_OPT[dhcp_state.opt_ptr], uip_ethaddr.addr, 4);
} }
@@ -167,7 +158,6 @@ void dhcp_send_discover(void)
dhcp_addopt_client_id(); dhcp_addopt_client_id();
dhcp_addopt_request_ip(); dhcp_addopt_request_ip();
dhcp_addopt_hostname();
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_PARAMS; DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_PARAMS;
DHCP_OPT[dhcp_state.opt_ptr++] = 3; DHCP_OPT[dhcp_state.opt_ptr++] = 3;
@@ -204,7 +194,6 @@ void dhcp_send_request(void)
dhcp_addopt_client_id(); dhcp_addopt_client_id();
dhcp_addopt_request_ip(); dhcp_addopt_request_ip();
dhcp_addopt_server_id(); dhcp_addopt_server_id();
dhcp_addopt_hostname();
DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_PARAMS; DHCP_OPT[dhcp_state.opt_ptr++] = DHCP_PARAMS;
DHCP_OPT[dhcp_state.opt_ptr++] = 3; DHCP_OPT[dhcp_state.opt_ptr++] = 3;
@@ -228,7 +217,7 @@ void dhcp_send_request(void)
} }
void ip_opt(__xdata uint8_t * ip) void ip_opt(uint8_t * __xdata ip)
{ {
dhcp_state.opt_ptr++; dhcp_state.opt_ptr++;
uint8_t len = DHCP_OPT[dhcp_state.opt_ptr++]; uint8_t len = DHCP_OPT[dhcp_state.opt_ptr++];
@@ -365,10 +354,8 @@ void dhcp_stop(void) __banked
} }
void dhcp_callback(uint16_t lport) __banked void dhcp_callback(void) __banked
{ {
if (lport != HTONS(DHCPC_CLIENT_PORT)) // Is this call for us? If not, ignore it
return;
if (!dhcp_state.state) if (!dhcp_state.state)
return; return;
if (uip_closed()) { if (uip_closed()) {
dhcp.h
+7 -2
View File
@@ -16,7 +16,7 @@
void dhcp_start(void) __banked; void dhcp_start(void) __banked;
void dhcp_stop(void) __banked; void dhcp_stop(void) __banked;
// void dhcp_periodic(void) __banked; // void dhcp_periodic(void) __banked;
void dhcp_callback(uint16_t lport) __banked; void dhcp_callback(void) __banked;
struct dhcp_state { struct dhcp_state {
@@ -35,9 +35,14 @@ struct dhcp_state {
uint32_t rebind; uint32_t rebind;
uint32_t renewal; uint32_t renewal;
__xdata struct uip_udp_conn *conn; struct uip_udp_conn *conn;
}; };
typedef struct dhcp_state uip_udp_appstate_t; typedef struct dhcp_state uip_udp_appstate_t;
/* Finally we define the application function to be called by uIP. */
#ifndef UIP_UDP_APPCALL
#define UIP_UDP_APPCALL dhcp_callback
#endif /* UIP_APPCALL */
#endif #endif
doc/automation.md
-32
View File
@@ -1,32 +0,0 @@
# Automation
## Upload
You can automate upload of the firmware via WEB with curl:
1. Authorize with /login endpoint and save cookie:
```bash
curl -c cookies.txt http://${SWITCH_IP}/login -d pwd=${PASSWORD} -i
```
This will save session cookie in cookies.txt
2. Send the firmware via form:
```bash
curl -b cookies.txt http://${SWITCH_IP}/upload -F "uploadedfile=@${FIRMWARE_FILE_PATH}" -i
```
You can expect that server will close connection, without responding to request.
Wait for SWITCH_IP to be responding again.
## Port status
In similar way to upload, you can fetch the json status of the ports.
1. Get the session cookie as for upload.
2. Hit the `/status.json` with cookie:
```bash
curl -b cookies.txt http://${SWITCH_IP}/status.json
```
doc/bandwidth.md
-238
View File
@@ -1,238 +0,0 @@
# Egress and Ingress Bandwidth Control
The RTL8372/3 allows to control the bandwidth of data transmitted (egress) and/or
admitted (ingress) at any given port. Once admitted, packets are internally switched
at wire-speed, since the backplane of the devices has a bandwidth of 60GBit/s.
The devices schedules transmission of packets by assigning packets to 8 queues
implemented in hardware per port, which share a total of 8Mbit of memory internal
to the switching part of the SoCs. Packets are assigned to the respective queues
based on the priority assigned to a packet, which can be based on various
properties of a packet such as IEEE 802.1P priority, DSCP value, physical port
number, destination or source MAC, Ether-Type-based, CVID, SVID, IPv4 source or
destination IP, IPv4/IPv6 TOS field, IPv6 Flow Label and even TCP/UDP
source/destination port. Once in a queue, packets are scheduled for egress
based on differnent configurable algorithms.
RTLPlayground currently allows only to control the bandwidth at ingress at a port
or just before packets leave a port. There is no control of the priority assignment
or queue scheduling mechanisms. The bandwidth can be controlled in steps of 16Kbit/s
from 16Kbit/s to 10Gbp/s.
The bandwidth control as currently implemented allows e.g. to assign a certain
share of bandwidth to an attached device (e.g. to share an uplink), or simulate
connections with low bandwidth and even bad connectivity with packet drops when
ingress is not controlled by Flow Control but by simply droping packets.
## Ingress/Egress control
The relevant registers for controlling Ingress and Egress at a port are:
```
#define RTL837X_IGBW_CTRL 0x4c10
#define IGBW_INC_BYPASS_PKT 0x100
#define IGBW_INC_IFG 0x80
#define IGBW_ADM_DHCP 0x20
#define IGBW_ADM_ARPREQ 0x10
#define IGBW_ADM_RMA 0x08
#define IGBW_ADM_BPDU 0x04
#define IGBW_ADM_RTKPKT 0x02
#define IGBW_ADM_IGMP 0x01
#define RTL837X_IGBW_PORT_CTRL 0x4C18
#define RTL837X_IGBW_PORT_FC_CTRL 0x4C8C
#define RTL837X_EGBW_PORT_CTRL 0x1c34
#define RTL837X_EGBW_CTRL 0x447c
#define EGBW_INC_IFG 0x02
#define EGBW_CPUMODE 0x01
```
`RTL837X_IGBW_CTRL/RTL837X_EGBW_CTRL` control the behaviour of the bandwidth control
at ingress and egress. The flags such as `IGBW_ADM_DHCP`control whether certain types
of packets such as DHCP are exempt from being ingress controlled. The
`IGBW_INC_IFG/EGBW_INC_IFG` flags control whether the Inter Frame Gaps are part of
the bandwidth being controlled. `EGBW_CPUMODE` controls whether packets generated
by the internal CPU are subject to egress control.
`RTL837X_IGBW_PORT_CTRL/RTL837X_EGBW_PORT_CTRL` configure the bandwidth for ingress
and egress at a port.
`RTL837X_IGBW_PORT_FC_CTRL` configures whether packets are bandwidth-controlled using
Flow Control (port-bit set), or simply dropped (port-bit clear).
## Ingress/Egress bandwidth API
The code currently provides the following functions:
```
void bandwidth_setup(void) __banked;
void bandwidth_ingress_set(uint8_t port, __xdata uint32_t bw) __banked;
void bandwidth_ingress_disable(uint8_t port) __banked;
void bandwidth_ingress_drop(uint8_t port) __banked;
void bandwidth_egress_set(uint8_t port, __xdata uint32_t bw) __banked;
void bandwidth_egress_disable(uint8_t port) __banked;
void bandwidth_status(uint8_t port) __banked;
```c
`bandwidth_setup()` is called at boot-time and configures excluding all special packets
that may be for the CPU and packets outgoing from the CPU to be excluded from bandwidth
control. IFG is not part of the bandwidth calculation.
`bandwidth_ingress_set()` enables ingress bandwidth control for a particular port given
the specified bandwidth. This also enabled Flow Control at a port.
`bandwidth_ingress_set()` enables egress bandwidth control for a particular port given
the specified bandwidth
`bandwidth_ingress_disable() / bandwidth_egress_disable()` disable ingress and egress
bandwidth control at a given port
`bandwidth_ingress_drop(port)` configures packets exceeding bandwidth limitations to
simply be dropped
`bandwidth_status(port)` shows the current bandwidth control status for a given port
## Bandwidth control configuration on the Serial Console
The following commands are provided on the serial console:
```
> bw [in|out|status] <port> [<hexvalue>|off|drop]
Configures or shows the status of bandwidth control
```
The bandwidth is given as the `<hexvalue>` in Kbit/s. Note that the control is only
possible at a granularity of 16 Kbit/s and the minimum value is also 16 Kbit/s. The
hexadecimal numbers must be given in full bytes, i.e. have an even number of digits.
To enable bandwidth control of ingress for physical port 2 to be set to 256 Kbit/s
do:
```
> bw in 2 0100
```
To drop packets when the bandwidth is exceeeded at port 2 do:
```
> bw in 2 drop
```
To disable bandwidth control for incoming packets on port 2 do:
```
> bw in 2 off
```
## Bandwidth configuration via the Web Interface
Not implemented, yet!
## A Test using iperf3
The following is and example how to test bandwidth control with a signle Linux device using
network namespaces to route packets between a client and a server on the same Linux device
through an external switch.
You will need 2 network intefaces on the linux device, say, 2 USB-Ethernet controllers called
eth0 and eth1:
```
$ sudo ip netns add client
$ sudo ip netns add server
$ sudo ip link set dev eth0 netns client
$ sudo ip link set dev eth1 netns server
$ sudo ip netns exec client ip link set dev eth0 up
$ sudo ip netns exec server ip link set dev eth1 up
$ sudo ip netns exec client ip addr add dev eth0 192.168.99.1/24
$ sudo ip netns exec server ip addr add dev eth1 192.168.99.2/24
$ sudo ip netns exec server iperf3 -s
```
This will start an iper3 server in the above shell.
In a different shell you can now run the iperf3 client against your server:
```
$ sudo ip netns exec client iperf -c 192.168.99.2
```
The LEDs on your switch where your network adapters are connected should start to flicker.
On a 1GBit connection, you should see:
```
$ sudo ip netns exec client iperf3 -c 192.168.99.2
Connecting to host 192.168.99.2, port 5201
[ 5] local 192.168.99.1 port 46776 connected to 192.168.99.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 114 MBytes 952 Mbits/sec 0 339 KBytes
[ 5] 1.00-2.00 sec 113 MBytes 946 Mbits/sec 0 356 KBytes
[ 5] 2.00-3.00 sec 112 MBytes 937 Mbits/sec 0 390 KBytes
[ 5] 3.00-4.00 sec 112 MBytes 942 Mbits/sec 0 390 KBytes
[ 5] 4.00-5.00 sec 112 MBytes 943 Mbits/sec 0 390 KBytes
[ 5] 5.00-6.00 sec 112 MBytes 944 Mbits/sec 0 390 KBytes
[ 5] 6.00-7.00 sec 112 MBytes 938 Mbits/sec 0 390 KBytes
[ 5] 7.00-8.00 sec 112 MBytes 942 Mbits/sec 0 410 KBytes
[ 5] 8.00-9.00 sec 113 MBytes 947 Mbits/sec 0 410 KBytes
[ 5] 9.00-10.00 sec 112 MBytes 940 Mbits/sec 0 410 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 1.10 GBytes 943 Mbits/sec 0 sender
[ 5] 0.00-10.00 sec 1.10 GBytes 941 Mbits/sec receiver
```
Now, we limit ingress on port 1 (connected to eth0) to 4 MBit/s:
```> bw in 1 1000
bandwidth_ingress_set called, port 04
RTL837X_IGBW_PORT_CTRL:0x00100100
RTL837X_IGBW_PORT_FC_CTRL:0x00000010
```
We now get:
```
$ sudo ip netns exec client iperf3 -c 192.168.99.2
[ 5] local 192.168.99.1 port 43324 connected to 192.168.99.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 1.12 MBytes 9.43 Mbits/sec 0 160 KBytes
[ 5] 1.00-2.00 sec 640 KBytes 5.24 Mbits/sec 0 160 KBytes
[ 5] 2.00-3.00 sec 384 KBytes 3.15 Mbits/sec 0 160 KBytes
[ 5] 3.00-4.00 sec 384 KBytes 3.15 Mbits/sec 0 160 KBytes
[ 5] 4.00-5.00 sec 640 KBytes 5.24 Mbits/sec 0 160 KBytes
[ 5] 5.00-6.00 sec 256 KBytes 2.10 Mbits/sec 0 160 KBytes
[ 5] 6.00-7.00 sec 640 KBytes 5.24 Mbits/sec 0 160 KBytes
[ 5] 7.00-8.00 sec 384 KBytes 3.15 Mbits/sec 0 160 KBytes
[ 5] 8.00-9.00 sec 640 KBytes 5.24 Mbits/sec 0 160 KBytes
[ 5] 9.00-10.00 sec 256 KBytes 2.10 Mbits/sec 0 160 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 5.25 MBytes 4.40 Mbits/sec 0 sender
[ 5] 0.00-10.16 sec 4.75 MBytes 3.92 Mbits/sec receiver
iperf Done.
```
Which is the 4Mbit/s we configured. There are no packet drops (retries) because
Flow Control is used to signal the Ethernet adapter on the incoming interface
(port 1 of the router) to slow down.
We can also configure a mere 256KBit/s and packet drop to simulate a bad connection:
```
> bw in 1 0100
bandwidth_ingress_set called, port 04
RTL837X_IGBW_PORT_CTRL:0x00100010
RTL837X_IGBW_PORT_FC_CTRL:0x00000010
> bw in 1 drop
RTL837X_IGBW_PORT_FC_CTRL:0x00000000
```
We now get:
```
$ sudo ip netns exec client iperf3 -c 192.168.99.2
Connecting to host 192.168.99.2, port 5201
[ 5] local 192.168.99.1 port 46060 connected to 192.168.99.2 port 5201
[ ID] Interval Transfer Bitrate Retr Cwnd
[ 5] 0.00-1.00 sec 384 KBytes 3.14 Mbits/sec 2 1.41 KBytes
[ 5] 1.00-2.00 sec 0.00 Bytes 0.00 bits/sec 54 1.41 KBytes
[ 5] 2.00-3.00 sec 0.00 Bytes 0.00 bits/sec 31 29.7 KBytes
[ 5] 3.00-4.00 sec 0.00 Bytes 0.00 bits/sec 2 1.41 KBytes
[ 5] 4.00-5.00 sec 0.00 Bytes 0.00 bits/sec 23 1.41 KBytes
[ 5] 5.00-6.00 sec 128 KBytes 1.05 Mbits/sec 16 14.1 KBytes
[ 5] 6.00-7.00 sec 0.00 Bytes 0.00 bits/sec 2 1.41 KBytes
[ 5] 7.00-8.00 sec 0.00 Bytes 0.00 bits/sec 11 1.41 KBytes
[ 5] 8.00-9.00 sec 128 KBytes 1.05 Mbits/sec 9 8.48 KBytes
[ 5] 9.00-10.00 sec 0.00 Bytes 0.00 bits/sec 2 1.41 KBytes
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bitrate Retr
[ 5] 0.00-10.00 sec 640 KBytes 524 Kbits/sec 152 sender
[ 5] 0.00-10.00 sec 256 KBytes 210 Kbits/sec receiver
iperf Done.
```
Which shows a large number of retries due to dropped packets and an average number
of received packets (the client sends the packets to the server, and they are sent
back to the client by the server) of 210 KBit/s, the number is higher for the transmitted
packets, because they may include dropped packets.
doc/devices/2M-PCB23-V2_2.md
-177
View File
@@ -1,177 +0,0 @@
### 2M-PCB23-V2.2
## Brands
| Brand | Type | Managed | PCB | Flash | Chip RTL |
|----------|-----------------|---------|---------------|-------|-------------|
| keepLINK | KP-9000-9XHML-X | Yes | 2M-PCB23-V2.2 | 2M | 8373 + 8224 |
## PCB
<img src="photos/2M-PCB23-V2.2-managed/2M-PCB23-V2.2-top.jpg" width="300" />
## Port overview
```
┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ ┌──────────┐ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP(J13) │ │
│ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ PORT 9 │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ PORT 5 │ │ PORT 6 │ │ PORT 7 │ │ PORT 8 │ │ MAC 8 │ O (PWR) │
│ O │ MAC 0 │ │ MAC 1 │ │ MAC 2 │ │ MAC 3 │ │ MAC 4 │ │ MAC 5 │ │ MAC 6 │ │ MAC 7 │ │ SerDes 1 │ O (SFP) │
│ RST └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └──────────┘ │
└─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
```
# Connectors
### J13, SFP connector
| SFP Pin | Signal | GPIO | Notes |
| ------- | ----------------- | ------ | ------------------------------ |
| 2 | TX_FAULT | ?? | |
| 3 | TX_DISABLE | ?? | |
| 4 | MODDEF2 – SDA | GPIO39 | |
| 5 | MODDEF1 – SCL | GPIO40 | |
| 6 | MODDEF0 – PRESENT | GPIO30 | "OE Exist" reported by `fiber` |
| 7 | RATE SEL | ?? | |
| 8 | LOS | GPIO37 | "OE LOS" reported by `fiber` |
| 9 | TO? | ?? | |
### T5, serial console
| pin | GPIO | Signal |
| --- | ------ | -------------- |
| 1 | GPIO32 | U0RXD (Input) |
| 2 | GND | Ground |
| 3 | GPIO31 | U0TXD (Output) |
### S1, unknown connector
| pin | GPIO | Signal |
| --- | -------- | -------------- |
| 1 | ??? | |
| x | | |
| 3 | ??? | |
| 4 | ??? | |
| 5 | ??? | |
Potentially slave interface or SMI.
### U7, flash memory
Flash chip is FM25Q16A.
### Reset button
GPIO54
## Register values
As probed with `regget` on stock firmware "V1.6".
### Model
| Name | Addr | Value |
| ------------------------- | ------ | ---------- |
| MODEL_NAME_INFO | 0x0004 | 0x83730000 |
| CHIP_MODE_INFO | 0x0008 | 0x00008000 |
| CHIP_INFO | 0x000C | 0x00300000 |
### GPIO
| Name | Addr | Value |
| ------------------------- | ------ | ---------- |
| GPIO_OUT0 | 0x003c | 0x10000000 |
| GPIO_OUT1 | 0x0040 | 0x00000010 |
| GPIO_OE0 | 0x004c | 0x10000000 |
| GPIO_OE1 | 0x0050 | 0x00000010 |
| BOND_INFO | 0x7f60 | 0x00000fff |
| STRAP_INFO | 0x7f64 | 0x0002f515 |
| IO_DRVING_0 | 0x7f68 | 0x00000000 |
| IO_DRVING_1 | 0x7f6c | 0x00000000 |
| IO_DRVING_2 | 0x7f70 | 0x00000000 |
| IO_SLEW_0 | 0x7f74 | 0x00000000 |
| IO_SLEW_1 | 0x7f78 | 0x00000000 |
| IO_SLEW_2 | 0x7f7c | 0x00000000 |
| IO_SMT_EN_0 | 0x7f80 | 0xffffffff |
| IO_SMT_EN_1 | 0x7f84 | 0xffffffff |
| IO_SMT_EN_2 | 0x7f88 | 0x0003ffff |
| IO_MUX_SEL_0 | 0x7f8c | 0x28000000 |
| IO_MUX_SEL_1 | 0x7f90 | 0x40000041 |
| IO_MUX_SEL_2 | 0x7f94 | 0x00000000 |
### LED
| Name | Addr | Value |
| ------------------------- | ------ | ---------- |
| LED_GLB_CTRL | 0x6520 | 0x0023e0f0 |
| LED3_0_SET3_2_CTRL1 | 0x6524 | 0xff001400 |
| LED3_0_SET1_0_CTRL1 | 0x6528 | 0x000f0000 |
| LED3_2_SET3_CTRL0 | 0x652c | 0x007f013f |
| LED1_0_SET3_CTRL0 | 0x6530 | 0x02000400 |
| LED3_2_SET2_CTRL0 | 0x6534 | 0x01400141 |
| LED1_0_SET2_CTRL0 | 0x6538 | 0x01440170 |
| LED3_2_SET1_CTRL0 | 0x653c | 0x18000041 |
| LED1_0_SET1_CTRL0 | 0x6540 | 0x0044017f |
| LED3_2_SET0_CTRL0 | 0x6544 | 0x00000044 |
| LED1_0_SET0_CTRL0 | 0x6548 | 0x00410175 |
| LED_PORT_SET_SEL_CTRL | 0x654c | 0x00010000 |
| SW_LED_LOAD | 0x6550 | 0x00000000 |
| LED_PORT_SW_EN_CTRL[0..7] | 0x6554 | 0x00000000 |
| LED_PORT_SW_EN_CTRL[8] | 0x6558 | 0x00000000 |
| LED_PORT_SW_CTRL[0] | 0x655c | 0x00000000 |
| LED_PORT_SW_CTRL[1] | 0x6560 | 0x00000000 |
| LED_PORT_SW_CTRL[2] | 0x6564 | 0x00000000 |
| LED_PORT_SW_CTRL[3] | 0x6568 | 0x00000000 |
| LED_PORT_SW_CTRL[4] | 0x656c | 0x00000000 |
| LED_PORT_SW_CTRL[5] | 0x6570 | 0x00000000 |
| LED_PORT_SW_CTRL[6] | 0x6574 | 0x00000000 |
| LED_PORT_SW_CTRL[7] | 0x6578 | 0x00000000 |
| LED_PORT_SW_CTRL[8] | 0x657c | 0x00000000 |
| LED_LOAD_LV1_10G | 0x6580 | 0x000fa000 |
| LED_LOAD_LV2_10G | 0x6584 | 0x00271000 |
| LED_LOAD_LV3_10G | 0x6588 | 0x004e2000 |
| LED_LOAD_LV1_5G | 0x658c | 0x000fa000 |
| LED_LOAD_LV2_5G | 0x6590 | 0x00271000 |
| LED_LOAD_LV3_5G | 0x6594 | 0x004e2000 |
| LED_LOAD_LV1_2P5G | 0x6598 | 0x000fa000 |
| LED_LOAD_LV2_2P5G | 0x659c | 0x00271000 |
| LED_LOAD_LV3_2P5G | 0x65a0 | 0x004e2000 |
| LED_LOAD_LV1_1G | 0x65a4 | 0x000fa000 |
| LED_LOAD_LV2_1G | 0x65a8 | 0x00271000 |
| LED_LOAD_LV3_1G | 0x65ac | 0x004e2000 |
| LED_LOAD_LV1_500M | 0x65b0 | 0x0007d000 |
| LED_LOAD_LV2_500M | 0x65b4 | 0x00138800 |
| LED_LOAD_LV3_500M | 0x65b8 | 0x00271000 |
| LED_LOAD_LV1_100M | 0x65bc | 0x00019000 |
| LED_LOAD_LV2_100M | 0x65c0 | 0x0003e800 |
| LED_LOAD_LV3_100M | 0x65c4 | 0x0007d000 |
| LED_LOAD_LV1_10M | 0x65c8 | 0x00002800 |
| LED_LOAD_LV2_10M | 0x65cc | 0x00006400 |
| LED_LOAD_LV3_10M | 0x65d0 | 0x0000c800 |
| LED_P_LOAD_CTRL | 0x65d4 | 0x00000000 |
| LED_GLB_ACTIVE | 0x65d8 | 0x3ffbedff |
| LED_GLB_IO_EN | 0x65dc | 0x77ffffff |
| LED_GLB_MUX_1 | 0c65e0 | 0x05102040 |
| LED_GLB_MUX_2 | 0x65e4 | 0x0c289206 |
| LED_GLB_MUX_3 | 0x65e8 | 0x1245038d |
| LED_GLB_MUX_4 | 0x65ec | 0x19616554 |
| LED_GLB_MUX_5 | 0x65f0 | 0x2079d71a |
| LED_GLB_MUX_6 | 0x65f4 | 0x000238a1 |
| LED_RLDP_CTRL_1 | 0x65f8 | 0x00000019 |
| LED_RLDP_CTRL_2 | 0x65fc | 0xffffffff |
| LED_RLDP_CTRL_3 | 0x6600 | 0x00006600 |
| LED_DUMY_0_ADDR | 0x6604 | 0x00000000 |
| LED_DUMY_1_ADDR | 0x6608 | 0x00000000 |
# LEDs
| Name | Components | Controlled by |
| ----------------------------- | --------------------------- | -------------------------- |
| RJ45 Right Green ("LINK/ACT") | | RJ45 LED0 |
| RJ45 Left Orange ("2.5G") | | RJ45 LED1 |
| RJ45 Left Green ("1G") | | RJ45 LED2 |
| "P" (PWR) | Top LED in "LED6" stack | probably pulled from Vcc |
| SFP Link ("9") | Bottom LED in "LED6" stack | SFP LED0 |
| ?? | D23 | SFP LED1 |
| ?? | D22 | SFP LED2 |
doc/devices/2M-PCB23-V3_1.md
+27 -55
View File
@@ -5,30 +5,13 @@
|---|---|---|---|---|---| |---|---|---|---|---|---|
| keepLINK | KP-9000-9XHML-X | Yes| 2M-PCB23-V3.1 | 2M| 8273N + 8224N | | keepLINK | KP-9000-9XHML-X | Yes| 2M-PCB23-V3.1 | 2M| 8273N + 8224N |
## PCB
<img src="photos/2M-PCB23-V3.1-managed/2M-PCB23-V3.1-top.jpeg" width="300" />
## Port overview
```
┌─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┐
│ ┌──────────┐ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP (J4) │ │
│ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ PORT 9 │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ PORT 5 │ │ PORT 6 │ │ PORT 7 │ │ PORT 8 │ │ MAC 8 │ O (PWR) │
│ O │ MAC 0 │ │ MAC 1 │ │ MAC 2 │ │ MAC 3 │ │ MAC 4 │ │ MAC 5 │ │ MAC 6 │ │ MAC 7 │ │ SerDes 1 │ O (SFP) │
│ RST └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └──────────┘ │
└─────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────────┘
```
# Connectors # Connectors
|`J4` SFP PINs | Signal | Component | GPIO | Notes | |`J4` SFP PINs | Signal | Component | GPIO | Notes |
|---|---|---|---|---| |---|---|---|---|---|
|2| TX_FAULT | | --- | | |2| TX_FAULT | | --- | |
|3| TX_DISABLE | | --- | Pull down - 0R | |3| TX_DISABLE | | --- | Pull down - 0R |
|4| MODDEF2 – SDA | b-r273 | GPIO39-SDA4 | | |4| MODDEF2 – SDA | b-r273 | GPIO39 | |
|5| MODDEF1 – SCL | b-r274 | GPIO40-SCL3 | | |5| MODDEF1 – SCL | b-r274 | GPIO40 | |
|6| MODDEF0 – PRESENT | B-R275 | GPIO38 | | |6| MODDEF0 – PRESENT | B-R275 | GPIO38 | |
|7| RATE SEL | | --- | | |7| RATE SEL | | --- | |
|8| LOS | B-R276 | GPIO38 | | |8| LOS | B-R276 | GPIO38 | |
@@ -48,26 +31,15 @@ Note: component numbering `<L>-<REFDES>-<SIDE>`
| 3 | GPIO32 | U0RXD (Input) | | 3 | GPIO32 | U0RXD (Input) |
| 4 | 3V3 | PWR | | 4 | 3V3 | PWR |
### T7, Slave Interface ### T7
|`T7` pin|what|Signal|Components| |`T7` pin|what|Signal|
|---|---|---|---| |---|---|---|
| 1 | Slave Interface | Slave SCK/SCL/MDC/EE_SCL | U7-6 | | 1 | GPIO | |
| 2 | GND | | | | 2 | GND | |
| 3 | Slave Interface | Slave SDI/SDA/MDIO/EE_SDA | U7-5 | | 3 | GPIO | |
| 4 | 3V3 | | | | 4 | 3V3 | |
| 5 | GPIO? | | | | 5 | GPIO | |
| 6 | GPIO? | | | | 6 | GPIO | |
`U7` can be a standard I2C eeprom memory, like `24LC32`.
The Slave Interface allows an extenal host to controll the SOC even if the internal MCU is used.
Depending on the `IF_SEL` bootstrap resistors, this can me `I2C`, `SPI` or `SMI`.
On this device it is `I2C` on address `0b1011100` or `0x5c` (7-bit notation).
* I2c Read: must be a write_read opperation `<Dev-ADDR><RegAddr15:8><RegAddr7:0>` `<DevAddr><Data7:0><Data15:8><Data23:16><Data31:24>`.
* I2c Write: `<Dev-ADDR><RegAddr15:8><RegAddr7:0><DevAddr><Data7:0><Data15:8><Data23:16><Data31:24>`.
Example register `0x0004` return chip id `0x00, 0x00, 0x72, 0x83` = `0x83720000`.
### T9 ### T9
|`T9` SMI | Signal | Component | GPIO | Notes | |`T9` SMI | Signal | Component | GPIO | Notes |
@@ -95,23 +67,23 @@ Reset-line found at `T-D6-L`, `T-R83`, `T-R97`, `T-R94`, `T-R93` active-low.
| HEX VAL. | GPIO | Component | What | | GPIO | Component | What | | HEX VAL. | GPIO | Component | What | | GPIO | Component | What |
| -------- | ------ | ---- | ---- | ---- | ---- | ---- | ---- | | -------- | ------ | ---- | ---- | ---- | ---- | ---- | ---- |
| 00000001 | GPIO00 | T-R34-R, P1-LED-YL |? | | GPIO32 | B-r126-r | U0RXD | | 00000001 | GPIO00 | T-R34-R, P1-LED-YL |? | | GPIO32 | B-r126-r | U0RXD |
| 00000002 | GPIO01 | T-R99-R, P1-LED-GR |? | | GPIO33 | | | | 00000002 | GPIO01 | T-R99-R, P1-LED-GR |? | | GPIO33 | | |
| 00000004 | GPIO02 | |? | | GPIO34 | B-R172, To RTL8224 | SMI-MDC0 | | 00000004 | GPIO02 | |? | | GPIO34 | B-R172, To RTL8225 | Already driver HIGH INT? |
| 00000008 | GPIO03 | T-R113-R, P2-LED-GR |? | | GPIO35 | B-R173, To RTL8224 | SMI-MDIO0 | | 00000008 | GPIO03 | T-R113-R, P2-LED-GR |? | | GPIO35 | B-R173, To RTL8225 | Easy to pulldown Reset? |
| 00000010 | GPIO04 | T-R115-R, P3-LED-YL |? | | GPIO36 | | | | | 00000010 | GPIO04 | T-R115-R, P3-LED-YL |? | | GPIO36 || | |
| 00000020 | GPIO05 | T-R117-R, P3-LED-GR |? | | GPIO37 | To RTL8224 ?? | Already driver low | | | 00000020 | GPIO05 | T-R117-R, P3-LED-GR |? | | GPIO37 | To RTL8225 | Already driver low I2C-SCL? | |
| 00000040 | GPIO06 | |? | | GPIO38 | sfp-6 via B-R275, sfp-8 via B-R276 | SFP-PRESENT | | 00000040 | GPIO06 | |? | | GPIO38 | sfp-6 via B-R275, sfp-8 via B-R276 | |
| 00000080 | GPIO07 | |? | | GPIO39 | sfp-4, b-r273, B-r143 | I2C4-SDA | | 00000080 | GPIO07 | |? | | GPIO39 | sfp-4, b-r273, B-r143 | |
| 00000100 | GPIO08 | | | | GPIO40 | T9-2, sfp-5 b-r274, B-r146 | I2C3-SCL | | 00000100 | GPIO08 | | | | GPIO40 | T9-2, sfp-5 b-r274, B-r146 | SMI-MDC |
| 00000200 | GPIO09 | |LEDx[^1] | | GPIO41 | T9-1, B-r143 | | I2C3-SDA (Unused) | | 00000200 | GPIO09 | |LEDx[^1] | | GPIO41 | T9-1, | SMI-MDO , B-r143 |
| 00000400 | GPIO10 | | | | GPIO42 | U6?8?-P6, T-R | SPI-MEMORY, CLK | | 00000400 | GPIO10 | | | | GPIO42 | U6?8?-P6, T-R | SPI-MEMORY, CLK |
| 00000800 | GPIO11 | |LEDx[^1] | | GPIO43 | U6?8?-P5, T-R | SPI-MEMORY, DI,IO0 | | 00000800 | GPIO11 | |LEDx[^1] | | GPIO43 | U6?8?-P5, T-R | SPI-MEMORY, DI,IO0 |
| 00001000 | GPIO12 | |LEDx[^1] | | GPIO44 | U6?8?-P2, T-R | SPI-MEMORY, DO,IO1 | | 00001000 | GPIO12 | |LEDx[^1] | | GPIO44 | U6?8?-P2, T-R | SPI-MEMORY, DO,IO1 |
| 00002000 | GPIO13 | |LEDx[^1] | | GPIO45 | U6?8?-P1, T-R | SPI-MEMORY, CS | | 00002000 | GPIO13 | |LEDx[^1] | | GPIO45 | U6?8?-P1, T-R | SPI-MEMORY, CS |
| 00004000 | GPIO14 | |LEDx[^1] | | GPIO46 | T10-6 | SPI0-SCK | | 00004000 | GPIO14 | |LEDx[^1] | | GPIO46 | T10-6 | |
| 00008000 | GPIO15 | |LEDx[^1] | | GPIO47 | T10-2 | SPI0-SDA | | 00008000 | GPIO15 | |LEDx[^1] | | GPIO47 | T10-2 | |
| 00010000 | GPIO16 | |LEDx[^1] | | GPIO48 | T10-4, J6 (BUTTON RESET) | SPI1-SCK | | 00010000 | GPIO16 | |LEDx[^1] | | GPIO48 | T10-4, J6 (BUTTON RESET) | |
| 00020000 | GPIO17 | |LEDx[^1] | | GPIO49 | T10-1 | SPI1-SDA | | 00020000 | GPIO17 | |LEDx[^1] | | GPIO49 | T10-1 | |
| 00040000 | GPIO18 | |LEDx[^1] | | GPIO50 | | | | 00040000 | GPIO18 | |LEDx[^1] | | GPIO50 | | |
| 00080000 | GPIO19 | |LEDx[^1] | | GPIO51 | | | | 00080000 | GPIO19 | |LEDx[^1] | | GPIO51 | | |
| 00100000 | GPIO20 | |LEDx[^1] | | GPIO52 | | | | 00100000 | GPIO20 | |LEDx[^1] | | GPIO52 | | |
@@ -124,8 +96,8 @@ Reset-line found at `T-D6-L`, `T-R83`, `T-R97`, `T-R94`, `T-R93` active-low.
| 08000000 | GPIO27 | |? | | GPIO59 | | | | 08000000 | GPIO27 | |? | | GPIO59 | | |
| 10000000 | GPIO28 | | | | GPIO60 | | | | 10000000 | GPIO28 | | | | GPIO60 | | |
| 20000000 | GPIO29 | | | | GPIO61 | | | | 20000000 | GPIO29 | | | | GPIO61 | | |
| 40000000 | GPIO30 | RTL8224N Reset |RTL8224 | | GPIO62 | To RTL8224 | Already driver | | | 40000000 | GPIO30 | |SFP-DETE | | GPIO62 | To RTL8225 | Already driver INT? | |
| 80000000 | GPIO31 | B-r129-r? |U0TXD | | GPIO63 | | | | 80000000 | GPIO31 | B-r129-r? |U0TXD | | GPIO63 | | |
## GPIO Register Input value ## GPIO Register Input value
@@ -158,4 +130,4 @@ Chip can deliver up to 5A and the sweetspot is at 2A.
So higher power SFP-modules should work. So higher power SFP-modules should work.
[^1]: LEDs are found by just plugin a RJ45 connector and see with cmd `gpio` the status change. But the bit pattern for port 1,2 are diffrent from port 3,4. [^1]: LEDs are found by just plugin a RJ45 connector and see with cmd `gpio` the status change. But the bit pattern for port 1,2 are diffrent from port 3,4.
doc/devices/2M-PCB43-V1.1.md
-55
View File
@@ -1,55 +0,0 @@
# 2G040210GSM
The following is a documentation for the managed switch marked as `2G040210GSM`
and sold by Mokerlink.
### Label specifications
- **Name**: 4-port 2.5G Web Managed Switch
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
- **Power**: 12V DC, 1A barrel connector
### What works
The device is fully supported:
- All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware (use KP_9000_6XHML_X2 in machine.h if building yourself or the corresponding pre-compiled binary)
- untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
### Hardware overview
Front
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-front.jpeg" width="300" />
Label
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-label.jpeg" width="300" />
### PCB overview
**Board markings**
- Top silkscreen: 2M-PCB43-V1.1
Top side
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-top.jpeg" width="300" />
Bottom
<img src="photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-bottom.jpeg" width="300" />
### J1, serial console
| `J8` pin | Signal |
| -------- | ----------- |
| 1 | RX (Input) |
| 2 | TX (Output) |
| 3 | GND |
| 4 | 3V3 |
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/FG-4GT-2SX_V2.0.md
-39
View File
@@ -1,39 +0,0 @@
# FG-4GT-2SX_V2.0
Following is documentation for unmanaged switch marked as `FG-4GT-2SX_V2.0`.
Original software is running UART on 9600 baud rate.
## Brands
* Ruiying RY-4GT-2SX
<img src="photos/FG-4GT-2SX_V2.0/RY-4GT-2SX_label.jpg" width="300" />
## What works
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Both SFP ports supporting 1G, 2.5G and 10G modules
- LEDs
## PCB overview
**Board markings**
- Top silkscreen: FG-4GT-2SX_V2.0
Front panel
<img src="photos/FG-4GT-2SX_V2.0/chassis-front.jpg" width="300" />
Top side
<img src="photos/FG-4GT-2SX_V2.0/PCB-top.jpg" width="300" />
Bottom
<img src="photos/FG-4GT-2SX_V2.0/PCB-bottom.jpg" width="300" />
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/FNS-1200P.md
-93
View File
@@ -1,93 +0,0 @@
# FOXNEO FNS-1200P
RTL8372-based 4×2.5G PoE+ + 2×SFP+ unmanaged switch.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Manufacturer**: FOXNEO
- **Model**: FNS-1200P
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps with PoE+
- 2 × SFP+: 1G / 2.5G / 10G
### What works
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps (PoE+ is not configurable via RTLPlayground)
- Both SFP+ ports supporting 1G, 2.5G and 10G modules
- LEDs: amber (2.5G) and green (1G/100M/10M) per copper port; combined link/act on SFP ports
### PCB overview
**Board markings**
- Top silkscreen: PCB-K0402W-U13-V2.0 / DIP-K0402WB-V2.0
**Key components**
- U3: SPI NOR flash, 2 MiB
- U7: unpopulated SOP8 footprint — I2C bus (RTL8372 slave at 0x5c) is accessible from its pads, useful for register dumps
- S1: unpopulated slide switch footprint (three through-holes used as serial console)
Front panel
<img src="photos/FNS-1200P/chassis-front.jpg" width="400" />
Top side (PCB)
<img src="photos/FNS-1200P/PCB-top.jpg" width="300" />
### Port layout
| Front panel position | Logical port | Physical port | Type |
|----------------------|--------------|---------------|---------|
| SFP left | 8 | 5 | SFP+ |
| RJ45 1 | 4 | 1 | Copper |
| RJ45 2 | 5 | 2 | Copper |
| RJ45 3 | 6 | 3 | Copper |
| RJ45 4 | 7 | 4 | Copper |
| SFP right | 3 | 6 | SFP+ |
### Serial console
The PCB has three unpopulated through-holes intended for a slide switch, directly connected to UART0.
Numbered from the left (SFP port side), the pinout is:
| Position (left→right) | Signal | GPIO |
|-----------------------|--------|--------------------------|
| 1 (leftmost) | RX | GPIO32\_UART0\_RX (32) |
| 2 (middle) | GND | GND |
| 3 (rightmost) | TX | GPIO31\_UART0\_TX (31) |
- **Settings**: 115200 baud / 8N1 / 3.3V TTL
- Connect a USB-TTL adapter: adapter TX → pin 1, GND → pin 2, adapter RX → pin 3
### LED configuration
Copper ports use LED SET0, SFP ports use LED SET1.
| SET | LED0 | LED2 |
|------|--------------------------------------------------|---------------------------------------------------|
| SET0 | Amber — lights on 2.5G link | Green — lights on 1G / 100M / 10M link |
| SET1 | All speeds — lights on any link with activity | — |
LED pad to physical port mapping:
| GPIO pads | Port |
|-----------|-------------------------|
| GPIO8–11 | Physical port 5 (left SFP) |
| GPIO12–14 | Physical port 1 (RJ45 1) |
| GPIO15–17 | Physical port 2 (RJ45 2) |
| GPIO18–20 | Physical port 3 (RJ45 3) |
| GPIO21–23 | Physical port 4 (RJ45 4) |
| GPIO24–27 | Physical port 6 (right SFP) |
### SFP GPIO assignments
| SFP | pin\_detect (ModAbs) | pin\_los | SerDes | I2C SDA | I2C SCL |
|------------------|-----------------------------|------------------------|--------|----------------------|--------------------------|
| Left (logical 8) | GPIO30\_ACL\_BIT3\_EN | GPIO37 | SDS1 | GPIO39\_I2C\_SDA4 | GPIO40\_I2C\_SCL3\_MDC1 |
| Right (logical 3)| GPIO50\_I2C\_SCL2\_UART1\_TX | GPIO51\_I2C\_SDA2\_UART1\_RX | SDS0 | GPIO41\_I2C\_SDA3\_MDIO1 | GPIO40\_I2C\_SCL3\_MDC1 |
GPIO assignments were verified by observing GPIO state changes during SFP module insertion/removal
and cross-checked against an original firmware register dump.
`pin_tx_disable` is GPIO\_NA on both ports (original firmware keeps all GPIOs as inputs).
doc/devices/HI-K0801WS.md
-36
View File
@@ -1,36 +0,0 @@
# Hisource Hi-K0801WS
Following is documentation for unmanaged switch marked as `Hi-K0801WS`.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Name**: 2.5G Ethernet Switch
- **Model**: Hi-K0801WS
- **Ports**:
- 8 × RJ45: 10/100/1000/2500 Mbps
- 1 × SFP: 1000 / 2500 / 10000 Mbps
### What works (expected from label + similar devices)
- All eight 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- SFP port supporting 1G, 2.5G and 10G modules
- LEDs
### PCB overview
**Board markings**
- Top silkscreen: PCB-KO801W-V2.0 / DIP-KO801WS-V2.0
Top side
<img src="photos/K0801W-V2.0-unmanaged\PCB-top.jpg" width="300" />
Bottom
<img src="photos/K0801W-V2.0-unmanaged\PCB-bottom.jpg" width="300" />
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/K0501W_V2_0.md
-23
View File
@@ -1,23 +0,0 @@
# K0501W V2.0
This board appears for example in the Davuaz Da-K6501W switch.
The general design of the board is similar to Hi-K0402WS V3.0.
However, there are several differences:
- One SFP port is replaced by a RTL8221B 2.5G PHY
- Only one LED is populated for the SFP port
- No mode switch and only one flash chip
- Older design using RTL8372 instead of RTL8372N (which also means different GPIO and LED configuration)
- Like earlier versions of the K0402W(S) board, there is no UART
All ports and LEDs are supported.
Installation is possible using a flash programmer.
The BoyaMicro 25Q16BSSIG flash chip is supported by flashprog with chip name "B.25D16AS/BY25Q16BS/BY25Q16ES".
## PCB pictures
The board is marked `PCB-K0501W-V2.0 DIP-K0501WS-V2.0`.
<img src="photos/K0501W_V2_0/pcb-top.jpg" width="300" />
<img src="photos/K0501W_V2_0/pcb-bottom.jpg" width="300" />
doc/devices/KP-9000-6XH-X2.md
-57
View File
@@ -1,57 +0,0 @@
# Keeplink KP-9000-6XH-X2
Following is documentation for unmanaged switch marked as `KP-9000-6XH-X2`.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Name**: 4X 2.5G RJ45 Port + 2 X 10G SFP+ Port
- **Model**: KP-9000-6XH-X2
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
### What works
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- SFP port with 10G modules
- LEDs
- untested due to missing Hardware: SFP+ ports equipped with 1G or 2.5G SFPs.
### Hardware overview
Front side:
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-front.jpg" width="600" />
Label:
<img src="photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-label.jpg" width="600" />
### PCB overview
**Board markings**
- Top silkscreen: 2M-PCB43-V2.1
Top side
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-top.jpg" width="600" />
Bottom
<img src="photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-bottom.jpg" width="600" />
## Reset Button
There's an unpopulated Reset button on the front left side of the PCB.
It can easily be soldered, you'll need an 4.5mmx4.5mm 90° button switch with a 3-pin footprint.
I got mine here: https://de.aliexpress.com/item/1005007295346702.html
The front case has already the hole in the metal case, you just have to punch a hole through the foil.
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/PCB-K0402WS-V3.0.md
-76
View File
@@ -1,76 +0,0 @@
# PCB-K0402WS-V3.0
Following is documentation for a variety of unmanaged switch internally marked as `PCB-K0402WS-V3.0`. They are sold under many brands.
Original software is running UART on 9600 baud rate.
Note during opening the device: there might be a hidden 5th screw on the back
of the device just above the big label, might be covered by a QC sticker.
### Brands
* Hisource Hi-K0402WS
<img src="photos/PCB-K0402WS-V3.0/HiSource_HI-K0402WS.jpg" width="300" />
* Ztyuav Z-QWYT0402
<img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402.jpg" width="300" />
<img src="photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402_label.jpg" width="300" />
### Programming
Using SPI clamp in-board is the only method for initial installation.
The board has two flash chips `BY25Q16BS` with 16M-bit size. The front switch, switches between the two flash chips.
These can be programed independently by using said switch - so it is e.g. possible to run the original and new firmware in parallel.
The switch actually controls the HOLD line of each flash chip, and toggling the switch results in a reboot.
If the programming clip keeps HOLD not connected, the flashing will commence on whatever the switch selected, regardless on which chip was clipped.
For the initial flash (at least with flashrom), the bin file produced by the build is much smaller than the flash chip, it is suggested to pad the file to keep flashrom happy: `truncate -s 2097152 rtlplayground-*-PCB_K0402WS_V3.bin`. Note: do not then proceed to use this resulting padded file for the web flashing (as it bricks the device), use the original unpadded .bin.
### What works (expected from label + similar devices)
- All four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Both SFP ports supporting 1G, 2.5G and 10G modules
- LEDs
### PCB overview
**Board markings**
- Top silkscreen: PCB-KO4022W-V3.0 / DIP-KO4022WS-V3.0
Top side
<img src="photos/PCB-K0402WS-V3.0/PCB-top.jpg" width="300" />
Bottom
<img src="photos/PCB-K0402WS-V3.0/PCB-bottom.jpg" width="300" />
### T2, serial console
| `J2` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | RX (Input) |
| 3 | TX (Output) |
| 4 | GND |
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
Board has two supply rails. `0.95` and `3.3` volt.
### `0.95` Core Voltage
Voltage is made by a `Techcode TD1720` .
### `3.3` Voltage
Voltage is created by chip marked as `Techcode TD1720`.
**There seems to have been a miscalculation when choosing the inductor and the device is ~25% more efficient with an 5V power supply.**
doc/devices/STEAMEMO_IG204_V1.md
-43
View File
@@ -1,43 +0,0 @@
# Steamemo IG204-V1
Following is documentation for unmanaged switch marked as `IG204-V1`.
Using SPI clamp in-board is the only method for initial installation.
### Label specifications
- **Name**: 2.5G Ethernet Switch
- **Model**: IG204 V1
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP: 1000 / 2500 / 10000 Mbps
### What works (expected from label + similar devices)
- Four 2.5GBASE-T RJ45 ports at 10/100/1000/2500 Mbps
- Two SFP ports supporting 1G, 2.5G and 10G modules
- LEDs
### PCB overview
**Board markings**
- Top silkscreen: PB-2131
Top side
<img src="photos/STEAMEMO_IG204_V1/PCB-top.jpg" width="600" />
### Connectors
### T7, serial console
| `T7` pin | Signal |
| -------- | ----------- |
| 1 | TX (Output) |
| 2 | GND |
| 3 | RX (Input) |
| 4 | 3V3 |
### Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/SWTG018AS_A_V2_0.md
-60
View File
@@ -1,60 +0,0 @@
# SWTG018AS-A V2.0
## Brands
| Brand | Type |Managed| PCB | Flash | Chip RTL |
|--------|------------------|-------|------------------|-----------------|---------------|
| Ampcom | SWTG018AS-A V2.0 | No | SWTG018AS-A V2.0 | 2MB | 8273N + 8224N |
| Horaco | HC-SWTGW218AS-A | Yes | SWTG018AS-A V2.0 | 2MB(25Q16JVSIQ) | 8273N + 8224N |
The following is a documentation for the unmanaged switch marked as `SWTG018AS-A V2.0`.
It is e.g. sold under the Ampcom brand, but no branh-markings are found on the device.
The original software is running UART on 9600 baud rate.
Using a SOIC clamp in-board is the only method for initial installation.
The board has a single flash chips `BS` with 4M-bit size. The front switch, switches between the two flash chips.
These can be programed independently by using said switch - so it is e.g. possible to run the original and new firmware in parallel.
### Label specifications
- **Name**: 9-Ports 2.5G Ethernet Switch
- **Ports**:
- 8 × RJ45: 10/100/1000/2500 Mbps
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
- **Power**: 12V DC, 1A barrel connector
<img src="photos/SWTG018AS_A_V_2_0/label.jpg" width="300" />
### What works
The device is fully supported:
- All 8 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware
### PCB overview
**Board markings**
- Top silkscreen: SWTG018AS-A-V2.0.1_19649
Top side
<img src="photos/SWTG018AS_A_V_2_0/pcb_top.jpg" width="300" />
Bottom
<img src="photos/SWTG018AS_A_V_2_0/pcb_bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | GND |
| 3 | RX (Input) |
| 4 | TX (Output) |
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/SWTG024AS-A-V2.0.1_4C_2SFP.md
-43
View File
@@ -1,43 +0,0 @@
### SWTG024AS-A-V2.0.1_4C_2SFP
It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| Horaco | ZX-SG4T2 | | PCB-SWTG024AS-A-V2.0.1_19650 | P25D40SH | ??? |
### Label specifications
- **Name**:
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 × SFP+: 1000 / 2500 / 10000 Mbps
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-label.jpg" width="300" />
### What works
The device is fully supported:
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
### PCB overview
**Board markings**
- Top silkscreen: PCB-SWTG024AS-A-V2.0.1_19650
Top side
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-top.jpg" width="300" />
Bottom
<img src="photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | GND |
| 3 | RX (Input) |
| 4 | TX (Output) |
doc/devices/SWTG024AS-A-V2.0.1_5C_1SFP.md
-44
View File
@@ -1,44 +0,0 @@
### SWTG024AS-A-V2.0.1_5C_1SFP
It is highly similar to SWTG024AS-V2.0, with the only difference being the GPIO configuration for the SFP port.
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| Horaco | HC-SWTGW215AS | | PCB-SWTG024AS-A-V2.0.1_19650 | W25Q16JV | 8272N |
### Label specifications
- **Name**:
- **Ports**:
- 5 × RJ45: 10/100/1000/2500 Mbps
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
<!-- <img src="" width="300" /> -->
### What works
The device is fully supported:
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware
### PCB overview
**Board markings**
- Top silkscreen: PCB-SWTG024AS-A-V2.0.1_19650
Top side
<!-- <img src="" width="300" /> -->
Bottom
<!-- <img src="" width="300" /> -->
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | GND |
| 3 | RX (Input) |
| 4 | TX (Output) |
doc/devices/SWTG024AS-V2.0.md
-49
View File
@@ -1,49 +0,0 @@
### SWTG024AS-V2.0
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| hongyavision | LG-SG5T1 | No | PCB-SWTG024AS-V2.0_16895 | 25Q40 | 8272 |
### Label specifications
- **Name**:
- **Ports**:
- 5 × RJ45: 10/100/1000/2500 Mbps
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
- **Power**: 12V DC, 1A 5525 connector
<img src="photos/SWTG024AS-V2.0/label.jpg" width="300" />
### What works
The device is fully supported:
- ALL 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware
- Online update does not work with 512KiB flash.
### PCB overview
**Board markings**
- Top silkscreen: PCB-SWTG024AS-V2.0
Top side
<img src="photos/SWTG024AS-V2.0/pcb_top.jpg" width="300" />
Bottom
<img src="photos/SWTG024AS-V2.0/pcb_bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | GND |
| 2 | RX (Input) |
| 3 | TX (Output) |
Note,`R52`、`R53`may not be installed.You need to bridge them using either solder or resistors.
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
doc/devices/SWTG024AS.md
+2 -2
View File
@@ -9,8 +9,8 @@ Also the RJ45 connectors can be all plastic/non-shielded or with metal shielding
|Brand|Type|Managed|PCB|PCB Label|Flash|Chip RTL| |Brand|Type|Managed|PCB|PCB Label|Flash|Chip RTL|
|---|---|---|---|---|---|---| |---|---|---|---|---|---|---|
| LIANGUO |SWTG024AS |No| SWTG024AS-v2.0-17452 | CM-23-11-2336 023-17453| 512 KiB | 8272 | | LIANGUO |SWTG024AS |No| SWTG024AS-v2.0-17452 | CM-23-11-2336 023-17453| 512 KiB | 8272 |
| Horaco |ZX-SWTG124AS | Yes | SWTG024AS-v2.0 | ??? | ??? | 8272 | | Haraco |ZX-SWTG124AS | Yes | SWTG024AS-v2.0 | ??? | ??? | 8272 |
| Xikestore |SKS3200M-4GPY2XF | Yes | SWTG024AS-v1.0 | CM-23-08-2043 023-16721 | 2048 KiB | 8272 | | Xikestore |SKS3200M-4GPY2XF | Yes | SWTG024AS-v1.0 | CM-23-08-2043 023-16721 | ??? | 8272 |
| Sodola | SL-SWTG124AS-D | Yes | SWTG024AS-v2.0-17452 | ??? | 2048 KiB | 8272 | | Sodola | SL-SWTG124AS-D | Yes | SWTG024AS-v2.0-17452 | ??? | 2048 KiB | 8272 |
## PCB ## PCB
doc/devices/SWTGW215AS.md
-164
View File
@@ -1,164 +0,0 @@
### ZX-SWTGW215AS
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| Lianguo | ZX-SWTGW215AS | Yes | PCB-SWTG115AS-V2.0 | FM25Q16A | 8272 |
## RTLPlayground target
Use machine target `MACHINE_LIANGUO_ZX_SWTGW215AS` for this device.
Physical hardware verification: 5x RJ45 ports + 1x SFP port.
Port 5 RJ45 is interfaced through a RTL8221B IC.
## PCB
<img src="photos/ZX-SWTGW215AS/pcb_top.jpg" width="300" />
# Connectors
## Port overview
```
┌──────────────────────────────────────────────────────────────────────────────────┐
│ ┌──────────┐ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP (J4) │ │
│ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ PORT 6 │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ PORT 5 │ │ LOG 8 │ │
│ O │ LOG 4 │ │ LOG 5 │ │ LOG 6 │ │ LOG 7 │ │ LOG 3 │ │ SerDes 1 │ │
│ RST └─────────┘ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └──────────┘ │
└──────────────────────────────────────────────────────────────────────────────────┘
```
| Type | RTLPlayground logical ports | Physical index |
|---|---|---|
| RJ45 | 3, 4, 5, 6, 7 | 1-5 |
| SFP | 8 | 6 |
## J4
* Location: SFP connector `J4`.
* Connected to: 10GMAC number 8, SerDes 1.
|`J4` SFP PINs | Signal | GPIO | Notes |
|---|---|---|---|
|3| TX_DISABLE | GPIO_NA | Not connected |
|4| MODDEF2 – SDA | GPIO39 | I2C SDA |
|5| MODDEF1 – SCL | GPIO40 | I2C SCL |
|6| MODDEF0 – PRESENT | GPIO30 | Detect |
|8| LOS | GPIO37 | RX Loss of Signal |
### Notes
* Not all signals were mapped mechanically, hence they've been left out of documentation.
## T3, Slave Interface
This connector goes to U4 `I2C EEPROM` and U10 `SPI FLASH` (mappings identical to SWTG024AS).
For detailed Slave Interface functionality and protocol information, see [T3 documentation in SWTG024AS.md](SWTG024AS.md#t3-slave-interface).
|`T3` pin|what|Signal|
|---|---|---|
|1| U4-P6, 33R U10-P6 | I2C-SCL, SPI-CLK, Slave SCK/SCL/MDC/EE_SCL |
|2| GND | --- |
|3| U4-P5, U10-P5 | I2C-SDA, SPI-DI/DO, Slave SDI/SDA/MDIO/EE_SDA |
|4| VCC |
|5| 33R -> U10-P2 | SPI-DO/D1 |
|6| U10-P1 | SPI-CS |
### Notes
* 1 pin is square shaped.
## T5, Serial Console
|`T5` pin|GPIO|Signal|
|---|---|---|
| 1 | GPIO31 | U0TXD (Output) |
| 2 | GND | |
| 3 | GPIO32 | U0RXD (Input) |
| 4 | 3V3 | |
### Notes
* 1 pin is square shaped.
## T8
|`T8` pin|GPIO|Signal|
|---|---|---|
| 1 | GPIO46 | |
| 2 | GND | |
| 3 | GPIO48 | |
| 4 | 3V3 | |
| 5 | GPIO47 | |
| 6 | GPIO49 | |
### Notes
* 1 pin is square shaped.
* Mapping unverified but assumed the same as [LIANGUO SWTG024AS](SWTG024AS.md#t8).
# Reset Circuit
| Function | GPIO |
|---|---|
| Reset button | GPIO54 |
### Notes
* Circuit is active-low
# GPIO
Note: T3/U4/U10-related signal annotations below are copied from [LIANGUO SWTG024AS T3 section](SWTG024AS.md#t3-slave-interface) as well as T8 port from [LIANGUO SWTG024AS T8 section](SWTG024AS.md#t8). They should be treated as assumed identical for ZX-SWTGW215AS as it has not been 100% confirmed true at the moment.
| HEX VAL. | GPIO | Component / Purpose | Notes | | GPIO | Component / Purpose | Notes |
| -------- | ------ | ---- | ---- | ---- | ---- | ---- | ---- |
| 00000001 | GPIO00 | | | | GPIO32 | T5-3 | U0RXD |
| 00000002 | GPIO01 | | | | GPIO33 | | |
| 00000004 | GPIO02 | | | | GPIO34 | | |
| 00000008 | GPIO03 | | | | GPIO35 | | |
| 00000010 | GPIO04 | | | | GPIO36 | | |
| 00000020 | GPIO05 | | | | GPIO37 | J4-8 | SFP LOS |
| 00000040 | GPIO06 | | | | GPIO38 | | |
| 00000080 | GPIO07 | | | | GPIO39 | J4-4 | SFP I2C SDA |
| 00000100 | GPIO08 | | | | GPIO40 | J4-5 | SFP I2C SCL |
| 00000200 | GPIO09 | | | | GPIO41 | | |
| 00000400 | GPIO10 | | | | GPIO42 | U10-P6, U4-P6, T3-1 | SPI FLASH CLK / I2C-SCL (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00000800 | GPIO11 | | | | GPIO43 | U10-P5, U4-P5, T3-3 | SPI FLASH DI/IO0 / I2C-SDA (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00001000 | GPIO12 | | | | GPIO44 | U10-P2, T3-5 | SPI FLASH DO/IO1 (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00002000 | GPIO13 | PORT1 LED GREEN | | | GPIO45 | U10-P1, T3-6 | SPI FLASH CS (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00004000 | GPIO14 | PORT1 LED ORANGE | | | GPIO46 | T8-1 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00008000 | GPIO15 | | | | GPIO47 | T8-5 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00010000 | GPIO16 | PORT2 LED GREEN | | | GPIO48 | T8-3 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00020000 | GPIO17 | PORT2 LED ORANGE | | | GPIO49 | T8-6 | (from [LIANGUO SWTG024AS](SWTG024AS.md#gpio)) |
| 00040000 | GPIO18 | PORT3 LED GREEN | | | GPIO50 | | |
| 00080000 | GPIO19 | PORT3 LED ORANGE | | | GPIO51 | | |
| 00100000 | GPIO20 | PORT4 LED GREEN | | | GPIO52 | | |
| 00200000 | GPIO21 | PORT4 LED ORANGE | | | GPIO53 | | |
| 00400000 | GPIO22 | PORT5 LED GREEN | | | GPIO54 | Reset Button | GPIO54_ACL_BIT2_EN |
| 00800000 | GPIO23 | PORT5 LED ORANGE | | | GPIO55 | | |
| 01000000 | GPIO24 | SFP LED GREEN | J4 | | GPIO56 | | |
| 02000000 | GPIO25 | | | | GPIO57 | | |
| 04000000 | GPIO26 | | | | GPIO58 | | |
| 08000000 | GPIO27 | | | | GPIO59 | | |
| 10000000 | GPIO28 | LED-SYSTEM | | | GPIO60 | | |
| 20000000 | GPIO29 | | | | GPIO61 | | |
| 40000000 | GPIO30 | J4-6 | SFP DETECT | | GPIO62 | | |
| 80000000 | GPIO31 | T5-1 | U0TXD | | GPIO63 | | |
# LEDs
| NAME | GPIO | Port(s) | Function | Notes |
| ---- | ---- | ---- | ---- | ---- |
| PORT1 LED GREEN | GPIO13 |5| Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT1 LED ORANGE | GPIO14 | 5 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT2 LED GREEN | GPIO16 | 4 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT2 LED ORANGE | GPIO17 | 4 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT3 LED GREEN | GPIO18 | 3 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT3 LED ORANGE | GPIO19 | 3 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT4 LED GREEN | GPIO20 | 2 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT4 LED ORANGE | GPIO21 | 2 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| PORT5 LED GREEN | GPIO22 | 1 | Activity | LEDS_2G5, LEDS_LINK, LEDS_ACT |
| PORT5 LED ORANGE | GPIO23 | 1 | Speed | LEDS_1G, LEDS_100M, LEDS_10M, LEDS_LINK, LEDS_ACT |
| SFP LED GREEN | GPIO24 | 6 (SFP J4) | Multi-speed | LEDS_10G, LEDS_5G, LEDS_2G5, LEDS_1G, LEDS_100M, LEDS_LINK, LEDS_ACT |
| LED-SYSTEM | GPIO28 | --- | System status | --- |
## Notes
While [SWTG024AS.md](SWTG024AS.md) can be used as a general reference for hardware concepts and interface specifications, this device should not be assumed to be identical beside the difference implicitely highlighted below. Not all information has been validated for compatibility with the SWTG215AS. Consult the SWTG024AS documentation with caution and verify any critical details against this device's.
doc/devices/SWTGW218AS.md
-25
View File
@@ -1,25 +0,0 @@
### ZX-SWTGW218AS
## Brands
|Brand|Type|Managed|PCB|Flash|Chip RTL|
|---|---|---|---|---|---|
| Mokerlink | ZX-SWTGW218AS | Yes| SWTG118AS-V2.0-16029 | 2MB (FM25Q16A)| 8273N + 8224N |
| Sodola | | | | | |
| Horaco | | | | | |
| XikeStor | SKS3200-8E1X | Yes | SWTG118AS-V2.1-17462 | 2MB (25Q16JVSIQ) | |
## Photos
<img src="photos/SWTGW218AS-managed/front.png" width="800" />
<img src="photos/SWTGW218AS-managed/label.jpg" width="800" />
## PCB
See up'n'atom's Repo:
https://github.com/up-n-atom/SWTG118AS/blob/main/photos/SWTG118AS-v2.0/SWTG118AS-v2.0-pcb-top.JPG
https://github.com/up-n-atom/SWTG118AS/blob/main/photos/SWTG118AS-v2.0/SWTG118AS-v2.0-pcb-bottom.JPG
doc/devices/TEG-S562.md
-174
View File
@@ -1,174 +0,0 @@
# TrendNet TEG-S562
Following is documentation for unmanaged switch marked as `TEG-S563/EU H/W: V1.0R`.
Original software is running UART on 57600 baud rate. The software does not allow to
do anything fancy via serial. There is `IP` configuration which can be printed as well.
There might be also some flash upload procedure, but using SPI clamp in-board seems to
be easier method.
The memory chip is `Winbond W25Q16JV` with 16M-bit size.
## What does work
1. 2.5G ports on all advertised speeds.
2. SFP+ communication.
3. Serial, Web UI.
4. All LEDs
## Known issues
None.
## PCB
Manufacturer information be found [on the product page](https://www.trendnet.com/support/support-detail.asp?prod=105_TEG-S562).
Top side
<img src="photos/TEG-S562/TEG-S562-v1.0R-top.jpg" width="300" />
Bottom
<img src="photos/TEG-S562/TEG-S562-v1.0R-bottom.jpg" width="300" />
## Connectors
### Port overview
```
┌─────────────────────────────────────────────────────────────────────────────┐
│ ┌──────────┐ ┌──────────┐ │
│ ┌─────────┐ ┌─────────┐ ┌─────────┐ ┌─────────┐ │ SFP 2 │ │ SFP 1 │ │
│ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ RJ45 │ │ PORT 5 │ │ PORT 6 │ │
│ │ PORT 1 │ │ PORT 2 │ │ PORT 3 │ │ PORT 4 │ │ MAC 8 │ │ MAC 3 │ │
│ │ MAC 4 │ │ MAC 5 │ │ MAC 6 │ │ MAC 7 │ │ SerDes 0 │ │ SerDes 1 │ │
│ └─────────┘ └─────────┘ └─────────┘ └─────────┘ └──────────┘ └──────────┘ │
└─────────────────────────────────────────────────────────────────────────────┘
```
### J2, serial console
| `J2` pin | Signal |
| -------- | ----------- |
| 1 | 3V3 |
| 2 | TX (Output) |
| 3 | RX (Input) |
| 4 | GND |
Note: 1 pin is square shaped, towards the power input.
### J5, power pass-thru
| `J5` pin | Signal |
| -------- | ------ |
| 1 | 12V |
| 2 | 12V |
| 3 | GND |
| 4 | GND |
Note: 1 pin is square shaped.
### U5, I2C eeprom placeholder
| `J5` pin | Signal |
| -------- | ------------- |
| 1 | GND |
| 2 | GND |
| 3 | GND |
| 4 | GND |
| 5 | 3V3 |
| 6 | ??? Logic Low |
| 7 | SCL |
| 8 | SDA |
SOC I2C address is 0x5c.
### SW1 GPIO switch?
Not populated but looks like a switch for selecting
GPIO level. Missing resistors in place.
GPIO mapping unknown.
### S2 Reset ciruit
Not populated but looks like a button can be added on `S2` connector,
requires additional `R571` resistor which will pull signal to ground.
GPIO mapping unknown.
### GPIO
| HEX VAL. | GPIO | When | GPIO | When |
| -------- | ------ | ----------------| ------ | -----------------------|
| 00000001 | GPIO00 | | GPIO32 | |
| 00000002 | GPIO01 | | GPIO33 | |
| 00000004 | GPIO02 | | GPIO34 | Random changes |
| 00000008 | GPIO03 | | GPIO35 | |
| 00000010 | GPIO04 | | GPIO36 | SFP2 Present |
| 00000020 | GPIO05 | | GPIO37 | SFP2 RX Los |
| 00000040 | GPIO06 | | GPIO38 | SFP1 Present |
| 00000080 | GPIO07 | | GPIO39 | |
| 00000100 | GPIO08 | | GPIO40 | |
| 00000200 | GPIO09 | | GPIO41 | |
| 00000400 | GPIO10 | | GPIO42 | Random changes |
| 00000800 | GPIO11 | | GPIO43 | |
| 00001000 | GPIO12 | PORT1 Link | GPIO44 | |
| 00002000 | GPIO13 | PORT1-LED-GREEN | GPIO45 | |
| 00004000 | GPIO14 | PORT1-LED-AMBER | GPIO46 | SFP1 I2C CLK |
| 00008000 | GPIO15 | PORT2 Link | GPIO47 | SFP1 I2C SDA |
| 00010000 | GPIO16 | PORT2-LED-GREEN | GPIO48 | SFP2 I2C CLK |
| 00020000 | GPIO17 | PORT2-LED-AMBER | GPIO49 | SFP2 I2C SDA |
| 00040000 | GPIO18 | PORT3 Link | GPIO50 | SFP1 Rx LOS |
| 00080000 | GPIO19 | PORT3-LED-GREEN | GPIO51 | SFP2 TX Disable |
| 00100000 | GPIO20 | PORT4-LED-AMBER | GPIO52 | |
| 00200000 | GPIO21 | PORT4 Link | GPIO53 | |
| 00400000 | GPIO22 | PORT4-LED-GREEN | GPIO54 | SFP1 TX Disable |
| 00800000 | GPIO23 | PORT4-LED-AMBER | GPIO55 | |
| 01000000 | GPIO24 | | GPIO56 | |
| 02000000 | GPIO25 | | GPIO57 | |
| 04000000 | GPIO26 | | GPIO58 | |
| 08000000 | GPIO27 | | GPIO59 | |
| 10000000 | GPIO28 | | GPIO60 | |
| 20000000 | GPIO29 | | GPIO61 | |
| 40000000 | GPIO30 | | GPIO62 | |
| 80000000 | GPIO31 | | GPIO63 | |
## LEDs
Ports 1-4 are amber for 100M/1G links, Green for 2.5G.
Port 5-6 are green for 10G/1G link. Both should flash on activity.
| NAME | When active |
| ---------------- | ---------------|
| PWR | 3V3 |
| SFP1 | |
| SFP2 | |
| PORT1-LED-GREEN | - |
| PORT2-LED-GREEN | PORT2 2.5G |
| PORT3-LED-GREEN | PORT3 2.5G |
| PORT4-LED-GREEN | PORT4 2.5G |
| PORT1-LED-AMBER | PORT1 1GB/100M |
| PORT2-LED-AMBER | PORT2 1GB/100M |
| PORT3-LED-AMBER | PORT3 1GB/100M |
| PORT4-LED-AMBER | PORT4 1GB/100M |
## Power supply
Input power is delivered via barell plug, `12V 1A` adapter was provided.
Board has two supply rails. `0.95` and `3.3` volt.
### `0.95` Core Voltage
Voltage is made by a `APW8713` (U3).
### `3.3` Voltage
Voltage is crated regulated by chip marked as `GoIAT` (U2).
## SFP SPI
There is separate clock and data lines for both SFP modules. MSDA/MSCK 0 and 1 need to be enabled.
SFP1 slot is connected to SPI0. SFP2 slot is connected to SPI1.
doc/devices/ZX310S-4T2XH.md
-59
View File
@@ -1,59 +0,0 @@
# ZX310S-4T2XH/
The following is a documentation for the managed switch marked as `ZX310S-4T2XH`
and sold by Horaco.
The original software is running UART on 57600 baud rate. The solder holes
of the UART header are filled in. In order to install a UART header, they
need to be cleared first. A 1.2mm drill can be used, alternatively a
de-soldering wick.
The original firmware uses 57600 baud 8N1
CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV (U3)
PHY RTL8261BE
### Label specifications
- **Name**:
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 1 x RJ45: 10/100/1000/2500/5000/10000 Mbps
- 1 × SFP+: 1000 / 2500 / 10000 Mbps
- **Power**: 12V DC, 2A barrel connector
<img src="photos/ZX310S-4T2XH/label.jpg" width="300" />
### What works
The device is fully supported:
- All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps
- The 10GBit port works. TODO: Fix EEE, speed selection
- The SFP+ port supports 1G, 2.5G and 10G modules
- LEDs work with the same indiciations as the OEM firmware
### PCB overview
**Board markings**
- Top silkscreen: PCB-SL310S-4T1T1X-V1.0.1-24107
Top side
<img src="photos/ZX310S-4T2XH/pcb_top.jpg" width="300" />
Bottom
<img src="photos/ZX310S-4T2XH/pcb_bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | TX (Output) |
| 2 | RX (Input) |
| 3 | GND |
| 4 | 3V3 |
## Power supply
Input power is delivered via barell plug, `12V 2A` adapter was provided.
doc/devices/ZX310S-4T2XT.md
-53
View File
@@ -1,53 +0,0 @@
# ZX310S-4T2XT
The following is a documentation for the managed switch marked as
`ZX310S-4T2XT` and sold by Horaco.
The original software is running UART on 57600 baud rate 8N1.
CPU: RTL8372
Flash: 2MByte Winbond W25Q16DV (U3)
PHY 2x RTL8261BE
### Label specifications
- **Name**:
- **Ports**:
- 4 × RJ45: 10/100/1000/2500 Mbps
- 2 x RJ45: 10/100/1000/2500/5000/10000 Mbps
- **Power**: 12V DC, 2A barrel connector
<img src="photos/ZX310S-4T2XT/label.jpg" width="300" />
### What works
The device is fully supported:
- All 4 2.5GBASE-T RJ45 ports work at 10/100/1000/2500 Mbps, including EEE
- The 10GBit ports works, including EEE.
- LEDs work with the same indiciations as the OEM firmware
### PCB overview
**Board markings**
- Top silkscreen: PCB-SL310S-4T2XT-V1.0.0-22273
Top side
<img src="photos/ZX310S-4T2XT/pcb_top.jpg" width="300" />
Bottom
<img src="photos/ZX310S-4T2XT/pcb_bottom.jpg" width="300" />
### J1, serial console
| `J1` pin | Signal |
| -------- | ----------- |
| 1 | TX (Output) |
| 2 | RX (Input) |
| 3 | GND |
| 4 | 3V3 |
## Power supply
Input power is delivered via barell plug, `12V 2A` adapter was provided.
doc/devices/photos/2M-PCB23-V2.2-managed/2M-PCB23-V2.2-bot.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 560 KiB

doc/devices/photos/2M-PCB23-V2.2-managed/2M-PCB23-V2.2-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 536 KiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-bottom.jpeg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.8 MiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-front.jpeg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 715 KiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-label.jpeg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 615 KiB

doc/devices/photos/2M-PCB43-V1.1-managed/2M-PCB43-V1.1-top.jpeg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.1 MiB

doc/devices/photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 754 KiB

doc/devices/photos/2M-PCB43-V2.1-unmanaged/2M-PCB43-V2.1-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.0 MiB

doc/devices/photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-front.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 71 KiB

doc/devices/photos/2M-PCB43-V2.1-unmanaged/KP-9000-6XH-X2-label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 521 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/PCB-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 133 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 207 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/RY-4GT-2SX_label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 129 KiB

doc/devices/photos/FG-4GT-2SX_V2.0/chassis-front.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 203 KiB

doc/devices/photos/FNS-1200P/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.3 MiB

doc/devices/photos/FNS-1200P/chassis-front.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 531 KiB

doc/devices/photos/K0501W_V2_0/pcb-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 548 KiB

doc/devices/photos/K0501W_V2_0/pcb-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 505 KiB

doc/devices/photos/K0801W-V2.0-unmanaged/PCB-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.4 MiB

doc/devices/photos/K0801W-V2.0-unmanaged/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.4 MiB

doc/devices/photos/KP-9000-6XHML-X2/label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.3 MiB

doc/devices/photos/KP-9000-6XHML-X2/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.6 MiB

doc/devices/photos/KP-9000-6XHML-X2/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.6 MiB

doc/devices/photos/PCB-K0402WS-V3.0/HiSource_HI-K0402WS.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.6 MiB

doc/devices/photos/PCB-K0402WS-V3.0/PCB-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 3.1 MiB

doc/devices/photos/PCB-K0402WS-V3.0/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.8 MiB

doc/devices/photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 67 KiB

doc/devices/photos/PCB-K0402WS-V3.0/Ztyuav_Z-QWYT0402_label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 152 KiB

doc/devices/photos/STEAMEMO_IG204_V1/PCB-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.2 MiB

doc/devices/photos/SWTG018AS_A_V_2_0/label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 876 KiB

doc/devices/photos/SWTG018AS_A_V_2_0/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.5 MiB

doc/devices/photos/SWTG018AS_A_V_2_0/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.8 MiB

doc/devices/photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 455 KiB

doc/devices/photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 710 KiB

doc/devices/photos/SWTG024AS-A-V2_0_1_19650/horaco-zx-sg4t2-pcb-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.6 MiB

doc/devices/photos/SWTG024AS-V2.0/label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 3.2 MiB

doc/devices/photos/SWTG024AS-V2.0/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 9.7 MiB

doc/devices/photos/SWTG024AS-V2.0/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 36 MiB

doc/devices/photos/SWTGW218AS-managed/front.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.2 MiB

doc/devices/photos/SWTGW218AS-managed/label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 558 KiB

doc/devices/photos/TEG-S562/TEG-S562-v1.0R-bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.8 MiB

doc/devices/photos/TEG-S562/TEG-S562-v1.0R-top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.6 MiB

doc/devices/photos/ZX-SWTGW215AS/label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.5 MiB

doc/devices/photos/ZX-SWTGW215AS/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.4 MiB

doc/devices/photos/ZX-SWTGW215AS/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.0 MiB

doc/devices/photos/ZX310S-4T2XH/label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 1.9 MiB

doc/devices/photos/ZX310S-4T2XH/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.7 MiB

doc/devices/photos/ZX310S-4T2XH/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 3.3 MiB

doc/devices/photos/ZX310S-4T2XT/label.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.2 MiB

doc/devices/photos/ZX310S-4T2XT/pcb_bottom.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.5 MiB

doc/devices/photos/ZX310S-4T2XT/pcb_top.jpg
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 2.7 MiB

doc/gpio.md
-98
View File
@@ -1,98 +0,0 @@
# GPIO Pin, Function and MUX registers.
These functions should bevalid for `RTL8372`, `RTL8372N`, `RTL8373`, and `RTL8373N`.
`N`-version doesn't seems to have all the GPIO pins available on the outside of the package.
| GPIO | Function | TYPE | MUX REG, BIT | (RTL8372) PIN# | (RTL8372N) PIN# |
| ----- | ---- | ---- | ---- | ---- | ---- |
| GPIO0 | LED0 | I/OPU | IO_MUX_SEL_0, BIT 0 | G1 | 12 |
| GPIO1 | LED1 | I/OPU | IO_MUX_SEL_0, BIT 1 | G2 | 15 |
| GPIO2 | LED2 | I/OPU | IO_MUX_SEL_0, BIT 2 | G3 | 14 |
| GPIO3 | LED3 | I/OPU | IO_MUX_SEL_0, BIT 3 | H1 | 16 |
| GPIO4 | LED4 | I/OPU | IO_MUX_SEL_0, BIT 4 | H2 | 18 |
| GPIO5 | LED5 | I/OPU | IO_MUX_SEL_0, BIT 5 | H3 | 20 |
| GPIO6 | LED6 | I/OPU | IO_MUX_SEL_0, BIT 6 | J1 | 22 |
| GPIO7 | LED7 | I/OPU | IO_MUX_SEL_0, BIT 7 | J2 | NoPin? |
| GPIO8 | LED8 | I/OPU | IO_MUX_SEL_0, BIT 8 | J3 | 24 |
| GPIO9 | LED9 | I/OPD | IO_MUX_SEL_0, BIT 9 | L1 | 23 |
| GPIO10 | LED10 | I/OPU | IO_MUX_SEL_0, BIT 10 | L2 | 26 |
| GPIO11 | LED11 | I/OPU | IO_MUX_SEL_0, BIT 11 | L3 | NoPin? |
| GPIO12 | LED12 | I/OPD | IO_MUX_SEL_0, BIT 12 | M1 | 28 |
| GPIO13 | LED13 | I/OPU | IO_MUX_SEL_0, BIT 13 | M2 | NoPin? |
| GPIO14 | LED14 | I/OPU | IO_MUX_SEL_0, BIT 14 | M3 | NoPin? |
| GPIO15 | LED15 | I/OPU | IO_MUX_SEL_0, BIT 15 | N1 | 25 |
| GPIO16 | LED16 | I/OPU | IO_MUX_SEL_0, BIT 16 | N2 | NoPin? |
| GPIO17 | LED17 | I/OPU | IO_MUX_SEL_0, BIT 17 | N3 | NoPin? |
| GPIO18 | LED18 | I/OPD | IO_MUX_SEL_0, BIT 18 | P1 | 30 |
| GPIO19 | LED19 | I/OPU | IO_MUX_SEL_0, BIT 19 | P2 | NoPin? |
| GPIO20 | LED20 | I/OPU | IO_MUX_SEL_0, BIT 20 | P3 | NoPin? |
| GPIO21 | LED21 | I/OPU | IO_MUX_SEL_0, BIT 21 | R1 | 27 |
| GPIO22 | LED22 | I/OPU | IO_MUX_SEL_0, BIT 22 | R2 | NoPin? |
| GPIO23 | LED23 | I/OPU | IO_MUX_SEL_0, BIT 23 | R3 | NoPin? |
| GPIO24 | LED24 | I/OPU | IO_MUX_SEL_0, BIT 24 | N19 | 88 |
| GPIO25 | LED25 | I/OPU | IO_MUX_SEL_0, BIT 25 | P19 | 86 |
| GPIO26 | LED26 | I/OPU | IO_MUX_SEL_0, BIT 26 | P18 | 84 |
| GPIO27 | LED27 | I/OPU | IO_MUX_SEL_0, BIT 27 | R19 | 82 |
| GPIO28 | SYS_LED | I/OPU | IO_MUX_SEL_0, BIT 28 | F1 | 13 |
| GPIO29 | GLB_RLDP_LED_EN | | IO_MUX_SEL_0, BIT 29 | | NoPin? |
| GPIO30 | ACL_BIT3_EN | | IO_MUX_SEL_2, BIT 3 | F3 | 11 |
| GPIO31 | UART TX (OUTPUT) | | IO_MUX_SEL_1, BIT 0 | L20 | 90 |
| GPIO32 | UART TX (INPUT) | | IO_MUX_SEL_1, BIT 1 | L21 | |
| GPIO33 | GPIO_INT | | IO_MUX_SEL_1, BIT 2 | | |
| GPIO34 | MDC0 | | IO_MUX_SEL_1, BIT 3 | | |
| GPIO35 | MDIO0 | | IO_MUX_SEL_1, BIT 4 | | |
| GPIO36 | PWM_OUT | | IO_MUX_SEL_1, BIT 30 | B13 | |
| GPIO37 | --- | | | L18 | |
| GPIO38 | --- | | | K19 | |
| GPIO39 | MSDA4 | | IO_MUX_SEL_1, BIT 29 | K20 | 95 |
| GPIO40 | MDC1/SCL3 | | IO_MUX_SEL_1, BIT 5 & 6 | J29 | |
| GPIO41 | MDIO1/MSDA3 | | IO_MUX_SEL_1, BIT 5 & 6 | J19 | |
| GPIO42 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | D1 | |
| GPIO43 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | E1 | |
| GPIO44 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | D2 | |
| GPIO45 | SPI-MEMORY | | RTL8373_INI_MODE_ADDR, BIT 0 & 1 | E2 | |
| GPIO46 | MSCK0 | | IO_MUX_SEL_1, BIT 7 & 8 | A2 | |
| GPIO47 | MSDA0 | | IO_MUX_SEL_1, BIT 9 & 10 | B2 | |
| GPIO48 | MSCK1 | | IO_MUX_SEL_1, BIT 11 & 12 | A1 | |
| GPIO49 | MSDA1 | | IO_MUX_SEL_1, BIT 13 & 14 | B1 | |
| GPIO50 | MSCL2/U1TXD | | IO_MUX_SEL_1, BIT 15 & 16 | C1 | |
| GPIO51 | MSDA2/U1RXD | | IO_MUX_SEL_1, BIT 17 & 18 | C2 | |
| GPIO52 | ACL_BIT0_EN | | IO_MUX_SEL_2, BIT 0 | | |
| GPIO53 | ACL_BIT1_EN | | IO_MUX_SEL_2, BIT 1 | | |
| GPIO54 | ACL_BIT2_EN | | IO_MUX_SEL_2, BIT 2 | E5 | |
| GPIO55 | PTP_CLK125M_IN | | IO_MUX_SEL_1, BIT 19 | | |
| GPIO56 | PTP_CLK_OUT | | IO_MUX_SEL_1, BIT 20 | | |
| GPIO57 | PTP_TOD_OUT | | IO_MUX_SEL_1, BIT 21 | | |
| GPIO58 | PTP_PPS_OUT | | IO_MUX_SEL_1, BIT 22 | | |
| GPIO59 | PTP_TOD_IN | | IO_MUX_SEL_1, BIT 23 | | |
| GPIO60 | PTP_PPS_IN | | IO_MUX_SEL_1, BIT 24 | | |
| GPIO61 | SYNCELOCK0 | | IO_MUX_SEL_1, BIT 27 | | |
| GPIO62 | SYNCELOCK1 | | IO_MUX_SEL_1, BIT 28 | | |
| GPIO63 | GPIO_MDIO0 | | IO_MUX_SEL_1, BIT 4 | | |
## I2C
| I2C | Function |Type | (RTL8372) PIN# | (RTL8372N) PIN# |
| ---- | ---- | ---- | ---- | ---- |
| GPIO47 | SDA0 | I/OPU | | B1 | 142 |
| GPIO49 | SDA1 | I/OPU | | B2 | 144 |
| GPIO51 | SDA2 | I/OPU | | C2 | ??? |
| GPIO41 | SDA3 | I/OPU | | J20 | 98 |
| GPIO39 | SDA4 | I/OPU | | K20 | 95 |
| GPIO46 | SCL0 | I/OPU | | A2 | 138 |
| GPIO48 | SCL1 | I/OPU | | A1 | 140 |
| GPIO50 | SCL2 | I/OPU | | C1 | ??? |
| GPIO40? | SCL3 | OPU | | J20 | |
# Other funcitons
| Function | Type | (RTL8372) PIN# | (RTL8372N) PIN# |
| ---- | ---- | ---- | ---- |
| nRESET | | A6 | 131 |
| PTP_SYNC | | B10 | 130 |
| INT | OPU | B6 | 132 |
doc/images/advanced_settings.png
BIN
View File
Binary file not shown.
Side by Side

Before

Width:  |  Height:  |  Size: 64 KiB

doc/link_aggregation.md
+1 -1
View File
@@ -92,7 +92,7 @@ The following shows the network configuration
On _both_ switches create a LAG with ports 1 and 2 inside and the default hash algorithm which takes On _both_ switches create a LAG with ports 1 and 2 inside and the default hash algorithm which takes
source and destination ports into account, e.g. just use the default: source and destination ports into account, e.g. just use the default:
``` ```
> lag 1 1 2 > lag 0 1 2
``` ```
doc/mods.md
+3 -6
View File
@@ -2,7 +2,7 @@
## SPI-Flash Memory ## SPI-Flash Memory
SPI-Flash memory can be replaced with an other type. Because the chip is defect, like #69 & #70 or you have an unmanaged-switch with a small flash size, and want to convert it to a managed-variant to run `RTLPlayground` software on it. Currently `RTLPlayground`-firmware expects `8 MBit / 1 MiB`. SPI-Flash memory can be replaced with an other type. Because the chip is defect, like #69 & #70 or you have an unmanaged-switch with a small flash size, and want to convert it to a managed-variant to run `RTLPlayground` software on it. Currently `RTLPlayground`-firmware expects `8 MBit / 2 MiB`.
### Size ### Size
@@ -25,7 +25,7 @@ Most use package are `SO8`-type may also called `SOIC8`-type. Which can also hav
### Specification ### Specification
1. Size: At least `8 MBit / 1 MiB` (theoretic max. `128 MBit / 16 MiB`, but is not *tested*!) 1. Size: At least `16 MBit / 4 MiB` (theoretic max. `128 MBit / 32 MiB`, but is not *tested*!)
2. Speed: `62.5 MHz` or better. 2. Speed: `62.5 MHz` or better.
3. Support for `DUAL SPI operation`. 3. Support for `DUAL SPI operation`.
Device need support for command `BBh`, `Dual I/O Fast Read` or `Fast Read Dual I/O`. Device need support for command `BBh`, `Dual I/O Fast Read` or `Fast Read Dual I/O`.
@@ -37,13 +37,10 @@ This list is incomplete.
| Brand | Partnumber | | Brand | Partnumber |
| ---------- |----------- | | ---------- |----------- |
| GigaDevice | GD25Q32E | | GigaDevice | GD25Q32E |
| Fundan | FM25Q16A |
| Puya | P25D40SH |
| Winbond | W25Q16JV | | Winbond | W25Q16JV |
| Winbond | W25Q32FV | | Winbond | W25Q32FV |
| Winbond | W25Q32JV | | Winbond | W25Q32JV |
| Winbond | W25Q16JL | | Winbond | W25Q16JL |
| Winbond | W25Q16DV | | Fundan | FM25Q16A |
| Winbond | W25Q80DV |
*NOTE*: Part numbers are incomplete. Part numbers may contain additional information such as package, temperature specifications, and even the number of devices on a reel. So always check the datasheet so that you have the right orderable partnumber. *NOTE*: Part numbers are incomplete. Part numbers may contain additional information such as package, temperature specifications, and even the number of devices on a reel. So always check the datasheet so that you have the right orderable partnumber.
doc/support-multi-language.md
-135
View File
@@ -1,135 +0,0 @@
# Supporting Multiple Languages in the Web UI
The firmware uses a client-side i18n approach
all translations are stored in a single JavaScript dictionary embedded in the firmware.
No server-side changes are needed.
## Architecture
All translation logic lives in `html/i18n.js`. The file contains:
- A `LANG` object with one sub-object per language (`en`, `ja`, ...)
- Language auto-detection (browser language → `localStorage` override)
- `t(key)` — look up a translated string
- `setLang(lang)` — switch language and update the page
- `applyTranslation(el)` — apply translation to one DOM element
Translation keys are **flat strings** (no nesting). The English keys in `LANG.en` also serve as the fallback when a key is missing in another language.
## How to Add a New Language
### 1. Add a dictionary entry in `html/i18n.js`
Append a new sub-object to the `LANG` object. Every key from `LANG.en` must be present:
```js
var LANG = {
en: {
nav_overview: 'Overview',
nav_port_config: 'Port Configuration',
// ... all keys for English
},
ja: {
nav_overview: '概要',
nav_port_config: 'ポート設定',
// ... all keys for Japanese
},
LANGCODE: { // ← add your language here
nav_overview: '...',
nav_port_config: '...',
// ... translate every key
},
};
```
### 2. Add the language to the navigation sidebar
In `html/navigation.js`, add an `<option>` to the language selector:
```js
+ "<option value='en'>English</option><option value='ja'>日本語</option>"
```
Replace with:
```js
+ "<option value='en'>English</option><option value='ja'>日本語</option><option value='LANGCODE'>Native Name</option>"
```
### 3. Verify auto-detection
The language detection code in `i18n.js` reads `navigator.language` and normalises it to the first two characters:
```js
var browser = (navigator.language || navigator.userLanguage || 'en').substring(0, 2);
return LANG[browser] ? browser : 'en';
```
If the two-letter code matches a key in `LANG`, it will be auto-selected. No changes needed here.
## Two Translation Mechanisms
### (A) `data-i18n` attribute (declarative — for HTML)
Add `data-i18n="key_name"` to any HTML element. The English text goes in the element content as a fallback:
```html
<h1 data-i18n="port_heading">Port Configuration</h1>
<input type="button" data-i18n="port_apply" value="Apply">
<option data-i18n="port_auto">Auto</option>
<title data-i18n="port_title">Port Configuration</title>
```
On page load, `applyTranslation()` sets:
- `el.value` for `<input type="submit|button">`
- `el.textContent` for `<option>`, `<title>`
- `el.innerHTML` for everything else
### (B) `t('key')` call (imperative — for JavaScript strings)
When generating HTML or text in JavaScript, wrap translatable strings with `t()`:
```js
td.appendChild(document.createTextNode(t('common_port') + i));
td.innerHTML = t('port_auto');
iHTML += "<tr><td>" + t('port_vendor') + "</td></tr>";
```
### Special Case: Link Speed Display
The `linkS` array in `html/main.js` maps numeric link states to display strings. The first two entries (`speed_disabled`, `speed_down`) use `t()` for translation; the remaining entries are static literals (they are the same in all languages):
```js
const linkS = [
function(){return t('speed_disabled')},
function(){return t('speed_down')},
"10M", "100M", "1000M", "500M", "10G", "2.5G", "5G"
];
function linkText(idx) { var v = linkS[idx]; return typeof v === 'function' ? v() : v; }
```
Always use `linkText(idx)` (not `linkS[idx]`) to read these values.
## Size Considerations
- `html/i18n.js` is embedded in the firmware filesystem (~14 KB for two languages)
- Each new language adds roughly the same number of bytes as the English dictionary (~3–4 KB)
- The firmware binary is padded to 512 KiB, so a few extra KB do not change the flash footprint
- Values that are identical in all languages should be inlined as literals rather than added to the dictionary (e.g., `"10M"`, `"2.5G"`, `"MAC"`, `"VLAN"`, `"CPU"`)
## Build
No special flags are needed. The `html/` directory is embedded by `fileadder` during the build.
## Script Load Order
`i18n.js` must be loaded after `main.js` (which defines `t()`'s dependencies like `LANG`) but before any page-specific JS that calls `t()`:
```html
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<script src="/eee.js"></script> <!-- uses t() -->
```
The `navigation.js` script is loaded last (bottom of `<body>`).
doc/supported_devices.md
+10 -29
View File
@@ -1,35 +1,16 @@
# Supported Hardware # Supported Hardware
The following devices have been tested and are fully working: The following devices have been tested and are fully working:
- Horaco ZX_SG4T2
- keepLINK kp-9000-6hx-x2 (RTL8372: 4x 2.5GBit + 2x 10GBit SFP+)
- keepLINK KP-9000-6XHML-X2, same as above, but Managed
- keepLINK kp-9000-6hx-x (RTL8372 + RTL8221B 2.5GBit PHY: 5 x 2.5GBit + 1x 10GBit SFP+)
- keepLINK kp-9000-9xh-x-eu (1 x RTL8373 + RTL8224: 8x 2.5GBit + 1x 10GBit SFP+)
- Lianguo LG-SWTGW218AS (RTL8373 + RTL8224 PHY: 8x 2.5GBit + 1x 10GBit SFP+)
- No-Name ZX-SWTGW215AS, managed version of kp-9000-6hx-x, ordered on
AliExpress as keepLINK 5+1 port managed
| Brand | Type | Managed | PCB | Flash | Ports | Other device based on RTL8272/3 that may work are described here: [Up-N-Atoms 2.5 GBit RTL Switch hacking guide]
|----------|-----------------|---------|---------------------------------------------------------------------------|-------|-------| (https://github.com/up-n-atom/SWTG118AS)
| Ampcom | WAM902-SWTG018AS| No | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md) | | 8 + 1 |
| Davuaz | Da-K6501W | No | [PCB-K0501W-V2.0](devices/K0501W_V2_0.md) | | 5 + 1 |
| FOXNEO | FNS-1200P | No | [PCB-K0402W-U13-V2.0](devices/FNS-1200P.md) | 2M | 4 + 2 |
| Hisource | Hi-K0402WS | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
| Hisource | Hi-K0801WS | No | [PCB-KO801W-V2.0](devices/HI-K0801WS.md) | | 8 + 1 |
| hongyavision | LG-SG5T1 | No | [PCB-SWTG024AS-V2.0_16895](devices/SWTG024AS-V2.0.md) | 0.5M | 5 + 1 |
| Horaco | HC-SWTGW215AS | Yes | [SWTG024AS-A-V2.0.1_19650 5C 1SFP](devices/SWTG024AS-A-V2.0.1_5C_1SFP.md) | ? | 5 + 1 |
| Horaco | HC-SWTGW218AS | Yes | [SWTG018AS-A V2.0](devices/SWTG018AS_A_V2_0.md) | | 8 + 1 |
| Horaco | ZX310S-4T2XH | Yes | [PCB-SL310S-4T1T1X-V1.0.1-24107](devices/ZX310S-4T2XH.md) | 2M | 5 + 1 |
| Horaco | ZX310S-4T2XT | Yes | [PCB-SL310S-4T2XT-V1.0.0-22273](devices/ZX310S-4T2XT.md) | 2M | 6 |
| Horaco | ZX-SG4T2 | No | [SWTG024AS-A-V2.0.1_19650_4C_2SFP](devices/SWTG024AS-A-V2.0.1_4C_2SFP.md) | 0.5M | 4 + 2 |
| Horaco | ZX-SWTG124AS | Yes | [SWTG024AS-v2.0](devices/SWTG024AS.md) | | 4 + 2 |
| Keeplink | KP-9000-6XH-X2 | No | [2M-PCB43-V2.1](devices/KP-9000-6XH-X2.md) | | 4 + 2 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V2.2](devices/2M-PCB23-V2_2.md) | 2M | 8 + 1 |
| keepLINK | KP-9000-9XHML-X | Yes | [2M-PCB23-V3.1](devices/2M-PCB23-V3_1.md) | 2M | 8 + 1 |
| LIANGUO | SWTG024AS | No | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md) | 0.5M | 4 + 2 |
| Lianguo | ZX-SWTGW215AS | Yes | [PCB-SWTG115AS-V2.0](devices/SWTGW215AS.md) | 2M | 5 + 1 |
| Mokerlink| ZX-SWTGW218AS | Yes | [SWTG118AS-V2.0-16029](devices/SWTGW218AS.md) | 2M | 8 + 1 |
| Ruiying | RY-4GT-2SX | No | [FG-4GT-2SX_V2.0](devices/FG-4GT-2SX_V2.0.md) | 4M | 4 + 2 |
| Sodola | SL-SWTG124AS-D | Yes | [SWTG024AS-v2.0-17452](devices/SWTG024AS.md) | 2M | 4 + 2 |
| Steamemo | IG204-V1 | No | [PB-2131](devices/STEAMEMO_IG204_V1.md) | | 4 + 2 |
| TrendNet | TEG-S562 | No | [TEG-S563/EU H/W: V1.0R](devices/TEG-S562.md) | 2M | 4 + 2 |
| Xikestore| SKS3200M-4GPY2XF| Yes | [SWTG024AS-v1.0](devices/SWTG024AS.md) | | 4 + 2 |
| XikeStor | SKS3200-8E1X | Yes | [SWTG118AS-V2.1-17462](devices/SWTGW218AS.md) | 2M | 8 + 1 |
| Ztyuav | Z-QWYT0402 | No | [PCB-K0402WS-V3.0](devices/PCB-K0402WS-V3.0.md) | | 4 + 2 |
Other device based on RTL8272/3 that may work are described here: [Up-N-Atoms 2.5 GBit RTL Switch hacking guide](https://github.com/up-n-atom/SWTG118AS)
Many of the RTL8272/3 devices come in versions with PoE support. The RTLPlayground usually also Many of the RTL8272/3 devices come in versions with PoE support. The RTLPlayground usually also
works on these, however, no support for configuring PoE is provided, simply because these works on these, however, no support for configuring PoE is provided, simply because these
doc/vlan.md
+7 -34
View File
@@ -33,23 +33,15 @@ An entry is deleted by adding an invalid entry (00 instead of 0x02 in
RTL837x_TBL_DATA_IN_A). RTL837x_TBL_DATA_IN_A).
A port is assigned a PVID by setting the PVID-bits of the corresponding A port is assigned a PVID by setting the PVID-bits of the corresponding
register of the port. 2 ports share a register. An odd port uses bits [23:12], register of the port. 2 ports share a register. One port uses the higher
an even port uses bits [11:0]. The base register is 16 bits, the other (even ports) use the lower. The base register is
RTL837x_PVID_BASE_REG (0x4e1c) and the registers go to 0x4e2c so that also RTL837x_PVID_BASE_REG (0x4e1c) and the registers go to 0x4e2c so that also
the CPU-Port may have a PVID. the CPU-Port may have a PVID.
Register RTL837x_REG_INGRESS (0x4e10) allows to define the ingress rules of Register RTL837x_REG_INGRESS (0x4e10) allows to define the iingress rules of
a port. 2 bits define a rule and bits 0-19 are being used. A value of 00 a port. 2 bits define a rule and bits 0-19 are being used. A value of 00
defines no filtering, 01 (0x01) allows only tagged packets, while 10 (0x02) defines no filtering, 01 (0x01) allows only tagged packets, while 10 (0x02)
allows only untagged packets to enter a port. allows only untagged packets to enter a port. The default PVID is 1.
Register RTL837X_VLAN_PORT_IGR_FLTR (0x4e18) enables or disables ingres VLAN
filtering, each bit corresponds to given port (port0 -> bit0, port9 -> bit9).
When enabled, incomming package's vlan tag is checked against VLAN membership
on given port. When package contains VLAN not in member list, package is dropped.
The default PVID on all port is 1, ingress VLAN filtering is enabled and all types of
frames are accepted on input on all ports.
By default, the ports transmit Ethernet frames with Realtek's proprietary By default, the ports transmit Ethernet frames with Realtek's proprietary
tag format. By setting bit 6 (0x40) of the respective port configuration tag format. By setting bit 6 (0x40) of the respective port configuration
@@ -59,9 +51,7 @@ registers 0x1238, 0x1338, ...
The code currently provides the following functions: The code currently provides the following functions:
``` ```
void port_pvid_set(uint8_t port, __xdata uint16_t pvid) __banked; void port_pvid_set(uint8_t port, __xdata uint16_t pvid) __banked;
uint16_t port_pvid_get(uint8_t port) __banked; void vlan_create(uint16_t vlan, uint16_t members, uint16_t tagged) __banked;
void vlan_create(void) __banked; // reads from global vlan_settings
int8_t vlan_get(register uint16_t vlan) __banked; // returns data in sfr_data
void vlan_delete(uint16_t vlan) __banked; void vlan_delete(uint16_t vlan) __banked;
``` ```
@@ -76,26 +66,9 @@ vlan <VLAN-ID> p[t/u]...
vlan <VLAN-ID> d vlan <VLAN-ID> d
deletes the VLAN deletes the VLAN
vlan show
Dumps the current ingress vlan settings.
vlan <VLAN-ID> mgmt
Restricts network access to the switch (web UI, syslog) to the given
VLAN. Use `vlan 0 mgmt` to disable the filter. Default is `vlan 1 mgmt`.
Warning: setting this to an unreachable VLAN locks out the web UI;
recovery requires serial console.
pvid <port> <VLAN-ID> pvid <port> <VLAN-ID>
assigns PVID to a port. ports are numbered as on the casing assigns PVID to a port. ports are numbered as on the casing
ingress [p]<t|u|a>... ingress <port> [tagged|untagged|all]
Allows ingress packages on port `p` only when `t`agged, `u`ntagged or `a`ny. Allows ingress only for the named packages at the given port
Multiple ports can be given at once as in vlan. When `p` is missing, all ports
are assigned the same mode. CPU port can not be changed.
Use `vlan show` to see current configuration.
Example:
`ingress 1t 2a` -> Set port 1 as tagged input only, set port 2 accepting any frames.
`ingress a` -> Set all ports to accept both tagged and untagged frames (default behaviour).
``` ```
html/bandwidth.html
-21
View File
@@ -1,21 +0,0 @@
<!DOCTYPE html>
<html>
<script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css">
<title data-i18n="bw_title">Ingress and Egress Bandwidth</title>
</head>
<body>
<nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div>
<h1 data-i18n="bw_heading">Ingress and Egress Bandwidth</h1>
<table id="bwtable">
<tr> <th> </th> <th colspan="3" data-i18n="bw_ingress"> Ingress </th> <th colspan="2" data-i18n="bw_egress">Egress</th> <th></th></tr>
<tr> <th data-i18n="bw_col_port">Port</th> <th data-i18n="bw_col_limit">Limit</th> <th data-i18n="bw_col_bandwidth">Bandwidth [kBit/s]</th> <th data-i18n="bw_col_flow">Flow Control</th> <th data-i18n="bw_col_limit">Limit</th> <th data-i18n="bw_col_bandwidth">Bandwidth [kBit/s]</th> <th data-i18n="bw_col_apply">Apply</th></tr>
</table>
<script src="/bandwidth.js"></script>
</div>
<script src="/navigation.js"></script>
</body>
</html>
html/bandwidth.js
-138
View File
@@ -1,138 +0,0 @@
const iLayout = '" type="number" maxlength="10" size="10" onfocus="inputFocus(';
function createBW() {
var tbl = document.getElementById('bwtable');
const limit = '<input type="checkbox" id="limit_port" onchange="exec();">'
if (tbl.rows.length <= 2 && numPorts) {
console.log("CREATING TABLE ", tbl.rows.length);
for (let i = 2; i < 2 + numPorts; i++) {
const tr = tbl.insertRow();
let td = tr.insertCell(); td.appendChild(document.createTextNode(t('common_port') + (i-1)));
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "ilimit_port_" + i).replace("exec()", "iClicked(" + i + ")");
td = tr.insertCell();
td.innerHTML = t('bw_unlimited');
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "fc_port_" + i).replace("exec()", "document.getElementById('bwapply_" + i + "').disabled=false;");
td = tr.insertCell();
td.innerHTML = limit.replaceAll("limit_port", "elimit_port_" + i).replace("exec()", "eClicked(" + i + ")");
td = tr.insertCell();
td.innerHTML = t('bw_unlimited');
var button = '<button type="button" id="bwapply_' + i + '" style="margin: 0 0 0 24px" onclick="applyBandwidth(' + i + ');">' + t('bw_col_apply') + '</button>';
td = tr.insertCell();
td.innerHTML = button;
document.getElementById("bwapply_" + i).disabled = true;
}
}
}
function iClicked(i)
{
document.getElementById("bwapply_" + i).disabled=false;
var tbl = document.getElementById('bwtable');
var tr = tbl.rows[i];
if (!document.getElementById("ilimit_port_" + i).checked) {
tr.cells[2].innerHTML = t('bw_unlimited');
document.getElementById("fc_port_" + i).disabled = true;
document.getElementById("fc_port_" + i).checked = true;
} else {
tr.cells[2].innerHTML = '<input id="ibw_' + i + iLayout + i + ')" value="0"/>';
document.getElementById("fc_port_" + i).disabled = false;
document.getElementById("fc_port_" + i).checked = true;
}
}
function eClicked(i)
{
document.getElementById("bwapply_" + i).disabled=false;
var tbl = document.getElementById('bwtable');
var tr = tbl.rows[i];
if (!document.getElementById("elimit_port_" + i).checked) {
tr.cells[5].innerHTML = t('bw_unlimited');
} else {
tr.cells[5].innerHTML = '<input id="ebw_' + i + iLayout + i + ')" value="0"/>';
}
}
function inputFocus(i)
{
document.getElementById("bwapply_" + i).disabled=false;
}
async function doCMD(cmd)
{
console.log("Sending >" + cmd + "<");
try {
const response = await fetch('/cmd', {
method: 'POST',
body: cmd
});
console.log('Completed!', response);
} catch(err) {
console.error(`Error: ${err}`);
}
}
async function applyBandwidth(i) {
var tbl = document.getElementById('bwtable');
var tr = tbl.rows[i];
var cmd = "bw in " + (i-1) + " off";
if (document.getElementById("ilimit_port_" + i).checked)
cmd = 'bw in ' + (i-1) + ' ' + parseInt(document.getElementById("ibw_" + i).value).toString(16).padStart(4, "0");;
doCMD(cmd);
if (document.getElementById("ilimit_port_" + i).checked) {
if (!document.getElementById("fc_port_" + i).checked)
cmd = "bw in " + (i-1) + " drop";
doCMD(cmd);
}
var cmd = "bw out " + (i-1) + " off";
if (document.getElementById("elimit_port_" + i).checked)
cmd = 'bw out ' + (i-1) + ' ' + parseInt(document.getElementById("ebw_" + i).value).toString(16).padStart(4, "0");;
doCMD(cmd);
}
function getBW() {
var xhttp = new XMLHttpRequest();
xhttp.onreadystatechange = function() {
console.log("IN getBW ");
if (this.readyState == 4 && this.status == 200) {
const s = JSON.parse(xhttp.responseText);
console.log("BW: ", JSON.stringify(s));
var tbl = document.getElementById('bwtable');
if (tbl.rows.length > 2 && numPorts) {
for (let i = 2; i < 2 + numPorts; i++) {
p = s[i-2];
let n = p.portNum;
let tr = tbl.rows[n+1];
if (!document.getElementById("bwapply_" + (n+1)).disabled)
continue;
console.log("Table Update row: " + i + " portNum is " + n + ", pState is " + pState[i-2] + ", row number is " + (n+1));
let iBW = parseInt(p.iBW,16) * 16; let eBW = parseInt(p.eBW,16) * 16;
document.getElementById("ilimit_port_" + (n+1)).checked = p.iLimited;
document.getElementById("elimit_port_" + (n+1)).checked = p.eLimited;
if (!p.iLimited) {
tr.cells[2].innerHTML = t('bw_unlimited');
} else {
tr.cells[2].innerHTML = '<input id="ibw_' + (n+1) + iLayout + (n+1) + ')" value="' + iBW +'"/>';
}
if (!p.eLimited) {
tr.cells[5].innerHTML = t('bw_unlimited');
} else {
tr.cells[5].innerHTML = '<input id="ebw_' + (n+1) + iLayout + (n+1) + ')" value="' + eBW +'"/>';
}
document.getElementById("fc_port_" + (n+1)).checked = p.iFC==1?true:false;
document.getElementById("fc_port_" + (n+1)).disabled = p.iLimited==1?false:true;
}
}
}
};
xhttp.open("GET", "/bandwidth.json", true);
xhttp.timeout = 1500; sendXHTTP(xhttp);
}
window.addEventListener("load", function() {
update( () => {
createBW();
getBW();
const interval = setInterval(update, 2000);
});
});
html/config
Symlink
+1
View File
@@ -0,0 +1 @@
../config.txt
html/config.js
+22 -78
View File
@@ -1,90 +1,35 @@
var configInterval = Number(); var configInterval = Number();
var configuration = []; var configuration = [];
const conf_cmds = [ const conf_cmds = [
/^ip\s+(\d{1,3}\.){3}\d{1,3}$/, /ip\s+(\d{1,3}\.){3}\d{1,3}/, /gw\s+(\d{1,3}\.){3}\d{1,3}/, /netmask\s+(\d{1,3}\.){3}\d{1,3}/,
/^ip\s+dhcp$/, /eee(\s+\d)?\s+(on|off)/, /mirror(\s+(\d|10))(\s+(\d|10)(t|r)?)+/, /vlan\s+(\d{1,4})(\s+(\d|10)(t|u)?)+/
/^gw\s+(\d{1,3}\.){3}\d{1,3}$/,
/^netmask\s+(\d{1,3}\.){3}\d{1,3}$/,
/^syslog\s+(on|off)$/,
/^syslog\s+ip\s+(\d{1,3}\.){3}\d{1,3}$/,
/^passwd\s+\S+$/,
/^vlan\s+\d{1,4}\s+d$/,
/^vlan\s+\d{1,4}\s+mgmt$/,
/^vlan\s+\d{1,4}(\s+[a-zA-Z]\w*)?(\s+\d{1,2}[tu]?)+$/,
/^pvid\s+\d{1,2}\s+\d{1,4}$/,
/^ingress(\s+\d{1,2}[tua])+$/,
/^ingress\s+[tua]$/,
/^port\s+\d{1,2}\s+(10m|100m|1g|2g5|5g|10g|auto|on|off)(\s+(half|full))?$/,
/^port\s+\d{1,2}\s+name\s+\S+$/,
/^eee(\s+\d{1,2})?\s+(on|off)$/,
/^mirror(\s+\d{1,2})(\s+\d{1,2}[tr]?)+$/,
/^lag\s+\d(\s+\d{1,2})+$/,
/^laghash\s+\d(\s+\w+)+$/,
/^isolate\s+\d{1,2}(\s+(off|\d{1,2}))+$/,
/^stp\s+(on|off)$/,
/^igmp\s+(on|off)$/,
/^mtu\s+\d{1,2}\s+\d+$/,
/^bw\s+(in|out)\s+\d{1,2}\s+\S+$/,
/^hostname\s+.{1,23}$/,
]; ];
const conf_overwrite = [ const conf_overwrite = [
/^ip\b/, /ip/, /gw/, /netmask/, /eee\s+\w+/, /eee(\s+\w)/, /mirror/, /vlan\s+(\d{1,4})/
/^gw\b/,
/^netmask\b/,
/^syslog\s+ip\b/,
/^syslog\b/,
/^passwd\b/,
/^vlan\s+\d{1,4}\s+mgmt$/,
/^vlan\s+\d{1,4}(?!\s+mgmt\b)/,
/^pvid\s+\d{1,2}\b/,
/^ingress\b/,
/^port\s+\d{1,2}(?!\s+name\b)/,
/^port\s+\d{1,2}\s+name\b/,
/^eee\s+\d{1,2}\b/,
/^eee\b/,
/^mirror\b/,
/^lag\s+\d+\b/,
/^laghash\b/,
/^isolate\s+\d{1,2}\b/,
/^stp\b/,
/^igmp\b/,
/^mtu\s+\d{1,2}\b/,
/^bw\s+(in|out)\s+\d{1,2}\b/,
/^hostname\b/,
]; ];
function parseConf(s){ function parseConf(s){
var a = s.split(/\r\n|\n/); var a = s.split(/\r\n|\n/);
for (var l = 0; l < a.length; l++) { for (var l = 0; l < a.length; l++) {
var line = a[l].trim().replace(/\s+/g, ' '); if (!a[l].length || a[l] == "\n" || a[l] == "\r\n")
if (!line.length) continue; continue;
const deleteMatch = line.match(/^vlan\s+(\d{1,4})\s+d$/); console.log(l + ' --> ' + a[l]);
if (deleteMatch) { var ignore = true;
const prefix = "vlan " + deleteMatch[1] + " "; for (const x of conf_cmds)
configuration = configuration.filter(c => !c.startsWith(prefix)); if (x.test(a[l])) ignore = false;
continue; if (ignore) continue;
} for (const x of conf_overwrite) {
console.log(l + ' --> ' + line); if (x.test(a[l])) {
var ignore = true; console.log("Match ", x, " to ", a[l]);
for (const x of conf_cmds) m = a[l].match(x);
if (x.test(line)) { ignore = false; break; } console.log("Starts with ", m[0]);
if (ignore) continue; configuration = configuration.filter(item => !(item.startsWith(m[0])));
for (const x of conf_overwrite) { }
if (x.test(line)) {
let m = line.match(x);
let matchStr = m[0];
configuration = configuration.filter(item =>
!(item === matchStr || (item.startsWith(matchStr + " ") && !item.endsWith(" mgmt") && !item.startsWith(matchStr + " name "))));
break;
} }
configuration.push(a[l]);
} }
// Only one management VLAN can be active, so drop any previous mgmt entry console.log("Configuration now:");
if (/^vlan\s+\d{1,4}\s+mgmt$/.test(line)) for (const x of configuration) { console.log(x); }
configuration = configuration.filter(item => !/^vlan\s+\d{1,4}\s+mgmt$/.test(item));
configuration.push(line);
}
console.log("Configuration now:");
for (const x of configuration) { console.log(x); }
} }
async function fetchConfig() { async function fetchConfig() {
@@ -104,8 +49,7 @@ async function fetchCmdLog() {
console.log("CMD-Log: ", response); console.log("CMD-Log: ", response);
const t = await response.text(); const t = await response.text();
return t; return t;
} catch(err) { } catch(error) {
console.error("Error: ", err); console.error("Error: ", err);
return "";
} }
} }
html/eee.html
+6 -7
View File
@@ -1,22 +1,21 @@
<!DOCTYPE html> <!DOCTYPE html>
<html> <html>
<script src="/main.js"></script> <script src="/main.js"></script>
<script src="/i18n.js"></script>
<link rel="stylesheet" href="style.css"> <link rel="stylesheet" href="style.css">
<title data-i18n="eee_title">EEE Configuration</title> <title>EEE Configuration</title>
</head> </head>
<body> <body>
<nav id="sidebar"></nav> <nav id="sidebar"></nav>
<div style="margin-left:16%;padding:1px 16px;height:1000px;"> <div style="margin-left:16%;padding:1px 16px;height:1000px;">
<div id="ports"></div> <div id="ports"></div>
<h1 data-i18n="eee_heading">EEE Status</h1> <h1>EEE Status</h1>
<table id="eeetable"> <table id="eeetable">
<tr> <th> </th> <th colspan="3" data-i18n="eee_advertising"> Advertising </th> <th colspan="3" data-i18n="eee_partner">Link-Partner advertises</th> <th></th></tr> <tr> <th> </th> <th colspan="3"> Advertising </th> <th colspan="3">Link-Partner advertises</th> <th></th></tr>
<tr> <th data-i18n="eee_port">Port</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th data-i18n="eee_active">Active?</th></tr> <tr> <th>Port</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th>2.5G</th> <th>1G</th> <th>100M</th> <th>Active?</th></tr>
</table> </table>
<div> <div>
<input style="width:20%;" class="action" id="eee_enable" onclick="eeeSub(0, 1);" type="button" data-i18n="eee_enable" value="Enable EEE"> <input style="width:20%;" class="action" id="eee_enable" onclick="eeeSub(0, 1);" type="button" value="Enable EEE">
<input style="width:20%;" class="action" id="eee_disable" onclick="eeeSub(0, 0);" type="button" data-i18n="eee_disable" value="Disable EEE"> <input style="width:20%;" class="action" id="eee_enable" onclick="eeeSub(0, 0);" type="button" value="Disable EEE">
</div> </div>
<script src="/eee.js"></script> <script src="/eee.js"></script>
<script src="/eee_sub.js"></script> <script src="/eee_sub.js"></script>
html/eee.js
+8 -10
View File
@@ -1,11 +1,12 @@
function createEEE() { function createEEE() {
var tbl = document.getElementById('eeetable'); var tbl = document.getElementById('eeetable');
if (tbl.rows.length <= 2 && numPorts) { if (tbl.rows.length <= 2 && numPorts) {
clearInterval(createEEEInterval);
console.log("CREATING TABLE ", tbl.rows.length); console.log("CREATING TABLE ", tbl.rows.length);
for (let i = 2; i < 2 + numPorts; i++) { for (let i = 2; i < 2 + numPorts; i++) {
console.log("Table row: " + i + "pState: " + pState[i-2]); console.log("Table row: " + i + "pState: " + pState[i-2]);
const tr = tbl.insertRow(); const tr = tbl.insertRow();
let td = tr.insertCell(); td.appendChild(document.createTextNode(t('common_port') + (i-1))); let td = tr.insertCell(); td.appendChild(document.createTextNode(`Port ${i-1}`));
for (let j = 0; j < 7; j++) { for (let j = 0; j < 7; j++) {
td = tr.insertCell(); td.appendChild(document.createTextNode(" ")); td = tr.insertCell(); td.appendChild(document.createTextNode(" "));
} }
@@ -28,8 +29,8 @@ function getEEE() {
let tr = tbl.rows[n+1]; let tr = tbl.rows[n+1];
if (!p.isSFP) { if (!p.isSFP) {
let eee = parseInt(p.eee,2); let lp = parseInt(p.eee_lp,2); let eee = parseInt(p.eee,2); let lp = parseInt(p.eee_lp,2);
tr.cells[1].innerHTML = `${eee&4?t('eee_on'):t('eee_off')}`; tr.cells[2].innerHTML = `${eee&2?t('eee_on'):t('eee_off')}`; tr.cells[3].innerHTML = `${eee&1?t('eee_on'):t('eee_off')}`; tr.cells[1].innerHTML = `${eee&4?"ON":"OFF"}`; tr.cells[2].innerHTML = `${eee&2?"ON":"OFF"}`; tr.cells[3].innerHTML = `${eee&1?"ON":"OFF"}`;
tr.cells[4].innerHTML = `${lp&4?t('eee_on'):t('eee_off')}`; tr.cells[5].innerHTML = `${lp&2?t('eee_on'):t('eee_off')}`; tr.cells[6].innerHTML = `${lp&1?t('eee_on'):t('eee_off')}`; tr.cells[4].innerHTML = `${lp&4?"ON":"OFF"}`; tr.cells[5].innerHTML = `${lp&2?"ON":"OFF"}`; tr.cells[6].innerHTML = `${lp&1?"ON":"OFF"}`;
tr.cells[7].innerHTML = `${p.active}`; tr.cells[7].innerHTML = `${p.active}`;
tr.classList.toggle('disabled', pState[i-2] < 0); tr.classList.toggle('isNOK', !p.active); tr.classList.toggle('isOK', p.active); tr.classList.toggle('disabled', pState[i-2] < 0); tr.classList.toggle('isNOK', !p.active); tr.classList.toggle('isOK', p.active);
} }
@@ -39,14 +40,11 @@ function getEEE() {
} }
}; };
xhttp.open("GET", "/eee.json", true); xhttp.open("GET", "/eee.json", true);
xhttp.timeout = 1500; sendXHTTP(xhttp); xhttp.timeout = 1500; xhttp.send();
} }
window.addEventListener("load", function() { window.addEventListener("load", function() {
update( () => { getEEE();
createEEE(); const iCount = setInterval(getEEE, 2000);
getEEE();
const interval = setInterval(update, 2000);
const iCount = setInterval(getEEE, 2000);
});
}); });
const createEEEInterval = setInterval(createEEE, 1000);
html/i18n.js
-603
View File
@@ -1,603 +0,0 @@
var LANG = {
en: {
nav_overview: 'Overview',
nav_port_config: 'Port Configuration',
nav_port_stat: 'Port Statistics',
nav_l2: 'L2 Configuration',
nav_mirror: 'Mirroring',
nav_lag: 'Link Aggregation',
nav_eee: 'EEE',
nav_bandwidth: 'Bandwidth Limits',
nav_system: 'System Settings',
nav_fw_update: 'Firmware Update',
port_name: 'Name',
port_status: 'Status',
port_not_enabled: 'Not enabled.',
port_link_speed: 'Link speed',
port_vendor: 'Vendor',
port_model: 'Model',
port_serial: 'Serial',
port_temp: 'Temp',
port_vcc: 'Vcc',
port_tx_fault: 'TX-Fault',
port_tx_disabled: 'TX-Disabled',
port_tx_bias: 'TX-Bias',
port_tx_power: 'TX-Power',
port_rx_power: 'RX-Power',
port_rx_los: 'RX-LOS',
speed_disabled: 'Disabled',
speed_down: 'Down',
port_title: 'FreeSwitchOS Port Configuration',
port_heading: 'Port Configuration',
port_col_port: 'Port',
port_col_name: 'Name',
port_col_speed: 'Current Link Speed',
port_col_set_speed: 'Set Speed',
port_col_disabled: 'Disabled',
port_col_apply: 'Apply',
port_mtu_heading: 'Configure Maximum Frame Size (MTU) forwarded at Port',
port_auto: 'Auto',
port_2500m: '2500MBit/Full',
port_1000m: '1000MBit/Full',
port_100m_f: '100MBit/Full',
port_100m_h: '100MBit/Half',
port_10m_f: '10MBit/Full',
port_10m_h: '10MBit/Half',
port_apply: 'Apply',
stat_title: 'FreeSwitchOS Port Statistics',
stat_heading: 'Port Statistics',
stat_detailed: 'Detailed Port Statistics',
stat_close: 'Close',
stat_col_port: 'Port',
stat_col_name: 'Name',
stat_col_link: 'link',
stat_col_tx_good: 'TX Good',
stat_col_tx_bad: 'TX Bad',
stat_col_rx_good: 'RX Good',
stat_col_rx_bad: 'RX Bad',
stat_col_all: 'All Counters',
stat_counter: 'Counter',
stat_value: 'Value',
stat_show: 'Show',
vlan_title: 'FreeSwitchOS VLAN Configuration',
vlan_heading: 'VLAN Configuration',
vlan_select: 'VLAN Select:',
vlan_choose: '— VLAN Choose —',
vlan_id: 'VLAN ID:',
vlan_get_config: 'Get Configuration',
vlan_name: 'VLAN Name:',
vlan_tagged: 'Tagged Ports',
vlan_untagged: 'Untagged Ports',
vlan_select_all: 'Select all',
vlan_pvid: 'Use as default VLAN for incoming traffic (PVID)',
vlan_update: 'Update / Create',
vlan_configured: 'Configured VLANs',
vlan_col_name: 'Name',
vlan_col_member: 'Member Ports',
vlan_col_tagged: 'Tagged Ports',
vlan_col_untagged: 'Untagged Ports',
vlan_col_pvid: 'PVID Ports',
vlan_col_delete: 'Delete',
vlan_set_id_first: 'Set VLAN ID first',
vlan_delete_confirm: 'Delete VLAN ',
lag_title: 'Link Aggregation Configuration',
lag_heading: 'Link Aggregation Groups Configuration',
lag_update: 'Update / Create',
mirror_title: 'Mirror Configuration',
mirror_heading: 'Mirror Configuration',
mirror_enabled: 'Enabled:',
mirror_port: 'Mirroring Port:',
mirror_tx: 'Mirrored Ports (TX)',
mirror_rx: 'Mirrored Ports (RX)',
mirror_update: 'Update / Create',
mirror_disable: 'Disable Mirroring',
mirror_set_port_first: 'Set Mirroring Port first',
mirror_select_ports: 'Select Mirrored Ports',
eee_title: 'EEE Configuration',
eee_heading: 'EEE Status',
eee_advertising: 'Advertising',
eee_partner: 'Link-Partner advertises',
eee_port: 'Port',
eee_active: 'Active?',
eee_enable: 'Enable EEE',
eee_disable: 'Disable EEE',
eee_on: 'ON',
eee_off: 'OFF',
l2_title: 'FreeSwitchOS L2 Configuration',
l2_heading: 'L2 Configuration',
l2_col_port: 'Port',
l2_col_type: 'Type',
l2_col_remove: 'Remove Entry',
l2_shown: 'Shown:',
l2_delete: 'Delete',
l2_static: 'static',
l2_learned: 'learned',
bw_title: 'Ingress and Egress Bandwidth',
bw_heading: 'Ingress and Egress Bandwidth',
bw_ingress: 'Ingress',
bw_egress: 'Egress',
bw_col_port: 'Port',
bw_col_limit: 'Limit',
bw_col_bandwidth: 'Bandwidth [kBit/s]',
bw_col_flow: 'Flow Control',
bw_col_apply: 'Apply',
bw_unlimited: 'UNLIMITED',
sys_title: 'System Settings',
sys_tab_system: 'System',
sys_tab_advanced: 'Advanced',
sys_tab_console: 'Console',
sys_heading: 'System Settings',
sys_ip: 'IP address:',
sys_model: 'Model:',
sys_hostname: 'Hostname:',
sys_apply: 'Apply',
sys_netmask: 'Netmask:',
sys_gateway: 'Gateway:',
sys_language: 'Language:',
sys_mgmt_vlan: 'Management VLAN:',
sys_mgmt_untagged: 'untagged',
sys_mgmt_confirm: 'Move switch management to VLAN ',
sys_mgmt_warn: 'The switch will start tagging its own traffic with that VLAN. If the port you are connected through does not carry it, this page becomes unreachable and the setting can only be undone over the console. Continue?',
sys_ip_note: 'When updating the above settings, remember to point your browser to the new IP afterwards:',
sys_update: 'Update Settings',
sys_save_label: 'Save all current settings to Flash:',
sys_save: 'Save Settings to Flash',
sys_advanced: 'Advanced Settings',
sys_startup_config: 'Startup configuration:',
sys_startup_warn: 'Be careful when saving the directly edited startup configuration, you can lock yourself out:',
sys_clear_config: 'Clear Startup Config',
sys_save_startup: 'Save Startup Settings to Flash',
sys_reset: 'Reset Switch',
sys_console: 'Console Command',
sys_enter_cmd: 'Enter command:',
sys_send_cmd: 'Send Command',
sys_console_warn: 'Be careful when entering console commands, you can lock yourself out!',
sys_invalid_ip: 'Invalid ip:',
sys_reset_confirm: 'Are you sure you want to reset the switch?',
sys_resetting: 'Switch is resetting. Please wait and refresh the page.',
login_title: 'RTL Switch Login',
login_heading: 'RTL Switch Login',
login_wrong: 'Wrong password!',
login_password: 'Password',
login_login: 'Login',
index_title: 'FreeSwitchOS Main Page',
index_heading: 'Switch Configuration',
index_settings: 'Settings',
update_title: 'Firmware update',
update_heading: 'Firmware Update',
update_instruction: 'Choose a firmware update file to upload:',
update_upload: 'Upload File',
common_port: 'Port ',
common_pkts: ' pkts',
},
ja: {
nav_overview: '概要',
nav_port_config: 'ポート設定',
nav_port_stat: 'ポート統計',
nav_l2: 'L2 設定',
nav_mirror: 'ミラーリング',
nav_lag: 'リンクアグリゲーション',
nav_eee: 'EEE',
nav_bandwidth: '帯域制限',
nav_system: 'システム設定',
nav_fw_update: 'ファームウェア更新',
port_name: '名前',
port_status: '状態',
port_not_enabled: '無効',
port_link_speed: 'リンク速度',
port_vendor: 'ベンダー',
port_model: 'モデル',
port_serial: 'シリアル',
port_temp: '温度',
port_vcc: '電圧',
port_tx_fault: 'TX 障害',
port_tx_disabled: 'TX 無効',
port_tx_bias: 'TX バイアス',
port_tx_power: 'TX 電力',
port_rx_power: 'RX 電力',
port_rx_los: 'RX 信号ロス',
speed_disabled: '無効',
speed_down: 'リンクダウン',
port_title: 'FreeSwitchOS ポート設定',
port_heading: 'ポート設定',
port_col_port: 'ポート',
port_col_name: '名前',
port_col_speed: '現在のリンク速度',
port_col_set_speed: '速度設定',
port_col_disabled: '無効',
port_col_apply: '適用',
port_mtu_heading: 'ポートの最大フレームサイズ (MTU) 設定',
port_auto: '自動',
port_2500m: '2500Mbps/全二重',
port_1000m: '1000Mbps/全二重',
port_100m_f: '100Mbps/全二重',
port_100m_h: '100Mbps/半二重',
port_10m_f: '10Mbps/全二重',
port_10m_h: '10Mbps/半二重',
port_apply: '適用',
stat_title: 'FreeSwitchOS ポート統計',
stat_heading: 'ポート統計',
stat_detailed: '詳細ポート統計',
stat_close: '閉じる',
stat_col_port: 'ポート',
stat_col_name: '名前',
stat_col_link: 'リンク',
stat_col_tx_good: 'TX 正常',
stat_col_tx_bad: 'TX 異常',
stat_col_rx_good: 'RX 正常',
stat_col_rx_bad: 'RX 異常',
stat_col_all: '全カウンタ',
stat_counter: 'カウンタ',
stat_value: '値',
stat_show: '表示',
vlan_title: 'FreeSwitchOS VLAN 設定',
vlan_heading: 'VLAN 設定',
vlan_select: 'VLAN 選択:',
vlan_choose: '— VLAN 選択 —',
vlan_id: 'VLAN ID:',
vlan_get_config: '設定取得',
vlan_name: 'VLAN 名:',
vlan_tagged: 'タグ付きポート',
vlan_untagged: 'タグ無しポート',
vlan_select_all: 'すべて選択',
vlan_pvid: '受信トラフィックのデフォルト VLAN (PVID)',
vlan_update: '更新 / 作成',
vlan_configured: '設定済み VLAN',
vlan_col_name: '名前',
vlan_col_member: 'メンバーポート',
vlan_col_tagged: 'タグ付きポート',
vlan_col_untagged: 'タグ無しポート',
vlan_col_pvid: 'PVID ポート',
vlan_col_delete: '削除',
vlan_set_id_first: 'VLAN ID を先に設定してください',
vlan_delete_confirm: 'VLAN 削除 ',
lag_title: 'リンクアグリゲーション設定',
lag_heading: 'リンクアグリゲーショングループ設定',
lag_update: '更新 / 作成',
mirror_title: 'ミラーリング設定',
mirror_heading: 'ミラーリング設定',
mirror_enabled: '有効:',
mirror_port: 'ミラーポート:',
mirror_tx: 'ミラー元ポート (TX)',
mirror_rx: 'ミラー元ポート (RX)',
mirror_update: '更新 / 作成',
mirror_disable: 'ミラーリング無効化',
mirror_set_port_first: 'ミラーポートを先に設定してください',
mirror_select_ports: 'ミラー元ポートを選択してください',
eee_title: 'EEE 設定',
eee_heading: 'EEE 状態',
eee_advertising: 'EEE アドバタイジング',
eee_partner: 'リンクパートナー広告',
eee_port: 'ポート',
eee_active: '有効?',
eee_enable: 'EEE 有効化',
eee_disable: 'EEE 無効化',
eee_on: 'オン',
eee_off: 'オフ',
l2_title: 'FreeSwitchOS L2 設定',
l2_heading: 'L2 設定',
l2_col_port: 'ポート',
l2_col_type: 'タイプ',
l2_col_remove: 'エントリ削除',
l2_shown: 'Shown:',
l2_delete: '削除',
l2_static: '静的',
l2_learned: '学習',
bw_title: '入力/出力帯域制限',
bw_heading: '入力/出力帯域制限',
bw_ingress: '入力',
bw_egress: '出力',
bw_col_port: 'ポート',
bw_col_limit: '制限',
bw_col_bandwidth: '帯域 [kbps]',
bw_col_flow: 'フロー制御',
bw_col_apply: '適用',
bw_unlimited: '制限無し',
sys_title: 'システム設定',
sys_tab_system: 'システム',
sys_tab_advanced: '詳細設定',
sys_tab_console: 'コンソール',
sys_heading: 'システム設定',
sys_ip: 'IP アドレス:',
sys_model: 'モデル:',
sys_hostname: 'ホスト名:',
sys_apply: '適用',
sys_netmask: 'ネットマスク:',
sys_gateway: 'ゲートウェイ:',
sys_language: '言語:',
sys_mgmt_vlan: 'Management VLAN:',
sys_mgmt_untagged: 'untagged',
sys_mgmt_confirm: 'Move switch management to VLAN ',
sys_mgmt_warn: 'The switch will start tagging its own traffic with that VLAN. If the port you are connected through does not carry it, this page becomes unreachable and the setting can only be undone over the console. Continue?',
sys_ip_note: '上記設定を変更した場合は、ブラウザで新しい IP にアクセスしてください:',
sys_update: '設定更新',
sys_save_label: '現在の設定をフラッシュに保存:',
sys_save: '設定をフラッシュに保存',
sys_advanced: '詳細設定',
sys_startup_config: '起動設定:',
sys_startup_warn: '起動設定を直接編集する際は注意してください。ロックアウトされる可能性があります:',
sys_clear_config: '起動設定クリア',
sys_save_startup: '起動設定をフラッシュに保存',
sys_reset: 'スイッチ再起動',
sys_console: 'コンソールコマンド',
sys_enter_cmd: 'コマンド入力:',
sys_send_cmd: 'コマンド送信',
sys_console_warn: 'コンソールコマンドは注意して入力してください。ロックアウトされる可能性があります!',
sys_invalid_ip: '無効な IP: ',
sys_reset_confirm: 'スイッチを再起動してもよろしいですか？',
sys_resetting: 'スイッチを再起動中です。しばらく待ってからページをリロードしてください。',
login_title: 'RTL スイッチ ログイン',
login_heading: 'RTL スイッチ ログイン',
login_wrong: 'パスワードが違います!',
login_password: 'パスワード',
login_login: 'ログイン',
index_title: 'FreeSwitchOS メインページ',
index_heading: 'スイッチ設定',
index_settings: '設定',
update_title: 'ファームウェア更新',
update_heading: 'ファームウェア更新',
update_instruction: 'アップロードするファームウェアファイルを選択:',
update_upload: 'ファイルをアップロード',
common_port: 'ポート ',
common_pkts: ' pkts',
},
zh: {
nav_overview: '概览',
nav_port_config: '端口配置',
nav_port_stat: '端口统计',
nav_l2: 'L2 配置',
nav_mirror: '端口镜像',
nav_lag: '链路聚合',
nav_eee: 'EEE',
nav_bandwidth: '带宽限制',
nav_system: '系统设置',
nav_fw_update: '固件升级',
port_name: '名称',
port_status: '状态',
port_not_enabled: '未启用。',
port_link_speed: '链路速率',
port_vendor: '厂商',
port_model: '型号',
port_serial: '序列号',
port_temp: '温度',
port_vcc: '供电电压',
port_tx_fault: 'TX 故障',
port_tx_disabled: 'TX 禁用',
port_tx_bias: 'TX 偏置电流',
port_tx_power: 'TX 光功率',
port_rx_power: 'RX 光功率',
port_rx_los: 'RX 信号丢失',
speed_disabled: '禁用',
speed_down: '未连接',
port_title: 'FreeSwitchOS 端口配置',
port_heading: '端口配置',
port_col_port: '端口',
port_col_name: '名称',
port_col_speed: '当前链路速率',
port_col_set_speed: '设置速率',
port_col_disabled: '禁用',
port_col_apply: '应用',
port_mtu_heading: '配置端口转发的最大帧大小 (MTU)',
port_auto: '自动',
port_2500m: '2500Mbps/全双工',
port_1000m: '1000Mbps/全双工',
port_100m_f: '100Mbps/全双工',
port_100m_h: '100Mbps/半双工',
port_10m_f: '10Mbps/全双工',
port_10m_h: '10Mbps/半双工',
port_apply: '应用',
stat_title: 'FreeSwitchOS 端口统计',
stat_heading: '端口统计',
stat_detailed: '详细端口统计',
stat_close: '关闭',
stat_col_port: '端口',
stat_col_name: '名称',
stat_col_link: '链路',
stat_col_tx_good: 'TX 正常包',
stat_col_tx_bad: 'TX 错误包',
stat_col_rx_good: 'RX 正常包',
stat_col_rx_bad: 'RX 错误包',
stat_col_all: '所有计数器',
stat_counter: '计数器',
stat_value: '值',
stat_show: '查看',
vlan_title: 'FreeSwitchOS VLAN 配置',
vlan_heading: 'VLAN 配置',
vlan_select: 'VLAN 选择:',
vlan_choose: '-- 请选择 VLAN --',
vlan_id: 'VLAN ID:',
vlan_get_config: '获取配置',
vlan_name: 'VLAN 名称:',
vlan_tagged: 'Tagged 端口',
vlan_untagged: 'Untagged 端口',
vlan_select_all: '全选',
vlan_pvid: '作为入方向流量的默认 VLAN (PVID)',
vlan_update: '更新 / 创建',
vlan_configured: '已配置 VLAN',
vlan_col_name: '名称',
vlan_col_member: '成员端口',
vlan_col_tagged: 'Tagged 端口',
vlan_col_untagged: 'Untagged 端口',
vlan_col_pvid: 'PVID 端口',
vlan_col_delete: '删除',
vlan_set_id_first: '请先设置 VLAN ID',
vlan_delete_confirm: '删除 VLAN ',
lag_title: '链路聚合配置',
lag_heading: '链路聚合组配置',
lag_update: '更新 / 创建',
mirror_title: '端口镜像配置',
mirror_heading: '端口镜像配置',
mirror_enabled: '启用:',
mirror_port: '镜像目的端口:',
mirror_tx: '被镜像端口 (TX)',
mirror_rx: '被镜像端口 (RX)',
mirror_update: '更新 / 创建',
mirror_disable: '禁用端口镜像',
mirror_set_port_first: '请先设置镜像目的端口',
mirror_select_ports: '请选择被镜像端口',
eee_title: 'EEE 配置',
eee_heading: 'EEE 状态',
eee_advertising: '本端通告',
eee_partner: '链路伙伴通告',
eee_port: '端口',
eee_active: '已生效?',
eee_enable: '启用 EEE',
eee_disable: '禁用 EEE',
eee_on: '开',
eee_off: '关',
l2_title: 'FreeSwitchOS L2 配置',
l2_heading: 'L2 配置',
l2_col_port: '端口',
l2_col_type: '类型',
l2_col_remove: '删除条目',
l2_shown: 'Shown:',
l2_delete: '删除',
l2_static: '静态',
l2_learned: '动态学习',
bw_title: '入方向/出方向带宽限制',
bw_heading: '入方向/出方向带宽限制',
bw_ingress: '入方向',
bw_egress: '出方向',
bw_col_port: '端口',
bw_col_limit: '限速',
bw_col_bandwidth: '带宽 [kbit/s]',
bw_col_flow: '流量控制',
bw_col_apply: '应用',
bw_unlimited: '不限速',
sys_title: '系统设置',
sys_tab_system: '系统',
sys_tab_advanced: '高级',
sys_tab_console: '控制台',
sys_heading: '系统设置',
sys_ip: 'IP 地址:',
sys_model: '型号:',
sys_hostname: '主机名:',
sys_apply: '应用',
sys_netmask: '子网掩码:',
sys_gateway: '网关:',
sys_language: '语言:',
sys_mgmt_vlan: 'Management VLAN:',
sys_mgmt_untagged: 'untagged',
sys_mgmt_confirm: 'Move switch management to VLAN ',
sys_mgmt_warn: 'The switch will start tagging its own traffic with that VLAN. If the port you are connected through does not carry it, this page becomes unreachable and the setting can only be undone over the console. Continue?',
sys_ip_note: '更新上述设置后，请使用新的 IP 地址重新访问管理界面:',
sys_update: '更新设置',
sys_save_label: '将当前全部设置保存到 Flash:',
sys_save: '保存设置到 Flash',
sys_advanced: '高级设置',
sys_startup_config: '启动配置:',
sys_startup_warn: '直接编辑启动配置时请谨慎，错误配置可能导致无法访问设备:',
sys_clear_config: '清除启动配置',
sys_save_startup: '保存启动配置到 Flash',
sys_reset: '重启交换机',
sys_console: '控制台命令',
sys_enter_cmd: '输入命令:',
sys_send_cmd: '发送命令',
sys_console_warn: '输入控制台命令时请谨慎，错误命令可能导致无法访问设备!',
sys_invalid_ip: '无效 IP: ',
sys_reset_confirm: '确定要重启交换机吗?',
sys_resetting: '交换机正在重启。请稍候并刷新页面。',
login_title: 'RTL 交换机登录',
login_heading: 'RTL 交换机登录',
login_wrong: '密码错误!',
login_password: '密码',
login_login: '登录',
index_title: 'FreeSwitchOS 主页',
index_heading: '交换机配置',
index_settings: '设置',
update_title: '固件升级',
update_heading: '固件升级',
update_instruction: '请选择要上传的固件文件:',
update_upload: '上传文件',
common_port: '端口 ',
common_pkts: ' 个包',
}
};
var rtlLang = (function() {
var saved = localStorage.getItem('rtl_lang');
if (saved && LANG[saved]) return saved;
var browser = (navigator.language || navigator.userLanguage || 'en').substring(0, 2);
return LANG[browser] ? browser : 'en';
})();
function t(key) {
return LANG[rtlLang][key] || LANG['en'][key] || key;
}
function setLang(lang) {
if (LANG[lang]) {
localStorage.setItem('rtl_lang', lang);
rtlLang = lang;
document.querySelectorAll('[data-i18n]').forEach(function(el) {
applyTranslation(el);
});
}
}
function applyTranslation(el) {
var key = el.getAttribute('data-i18n');
if (!key) return;
if (el.tagName === 'INPUT' && (el.type === 'submit' || el.type === 'button')) {
el.value = t(key);
} else if (el.tagName === 'OPTION') {
el.textContent = t(key);
} else if (el.tagName === 'TITLE') {
el.textContent = t(key);
} else {
el.innerHTML = t(key);
}
}
document.addEventListener('DOMContentLoaded', function() {
document.querySelectorAll('[data-i18n]').forEach(function(el) {
applyTranslation(el);
});
});

Some files were not shown because too many files have changed in this diff Show More