Merge pull request #540 from DrDoof/fix/igmp-link-local

igmp: leave groups in 224.0.0.0/24 to flooding
Merge pull request #566 from DrDoof/fix/igmp-off-lookup
2026-10-29 17:54:14 +08:00 · 2026-10-14 02:01:59 -05:00 · 2026-10-14 02:01:55 -05:00 · 2026-10-14 01:35:24 -05:00 · 2026-10-14 05:51:25 +02:00 · 2026-10-14 00:55:11 +02:00
128 changed files with 3993 additions and 1612 deletions
@@ -20,7 +20,7 @@ jobs:
          apt install make gcc sdcc xxd python-is-python3 libjson-c-dev zlib1g-dev -y
      - name: Run the host-side unit tests
        run: make -C test
-      - name: Check if machine.c can be compiled for all machines
+      - name: Check that every machine definition can be compiled
        run: make machine_check
      - name: Make project (4x2/RTL8372)
        run: make CI=1 MACHINE="KP_9000_6XHML_X2"
@@ -7,17 +7,20 @@ HTML_LOCATION = 262144
 ifeq ($(origin CC),default)
 CC = sdcc
 endif
-CC_FLAGS = -mmcs51 -I. -Ihttpd -Iuip
+CC_FLAGS = -mmcs51 -I. -Imachine -Ihttpd -Iuip
 ASM ?= sdas8051
 AFLAGS= -plosgff

 SUBDIRS := tools
 SUBDIRSCLEAN=$(addsuffix clean,$(SUBDIRS))

-ifeq ($(MACHINE),)
-	MACHINE:= $(shell grep "^\s*#define MACHINE_" machine.h | sed "s/^\s*#define MACHINE_//")
-else
+# $MACHINE selects machine/$(MACHINE).c as the board definition and is passed
+# on as -DMACHINE_$(MACHINE), which the rest of the firmware tests with
+# #if defined(MACHINE_...), and as -DMACHINE_NAME, which machine.h uses to
+# include machine/$(MACHINE).h. Both take the same value, so they cannot drift.
+ifneq ($(MACHINE),)
 	CC_FLAGS += -DMACHINE_$(MACHINE)
+	CC_FLAGS += -DMACHINE_NAME=$(MACHINE)
 endif
 # Health instrumentation and the "health" console command: HEALTH=1 gmake ...
 ifneq ($(HEALTH),)
@@ -28,6 +31,9 @@ ifeq ($(CI),1)
 	CC_FLAGS += --Werror
 endif

+# The board definition being built: one file per MACHINE_* symbol in machine.h.
+MACHINE_SRC = machine/$(MACHINE).c
+
 BUILDDIR = output/$(MACHINE)
 VERSION_HEADER := version.h

@@ -51,16 +57,30 @@ BUILD_DATE := $(shell date -u -d @$(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S" 2>/d
 	|| date -u -r $(SOURCE_DATE_EPOCH) +"%Y-%m-%d %H:%M:%S")
 endif

-all: create_build_dir $(VERSION_HEADER) $(SUBDIRS) $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin
+# $(MACHINE_SRC) is listed here so an unknown $MACHINE fails before anything else
+# is built, including the tools/ subdirectory.
+all: create_build_dir $(VERSION_HEADER) $(MACHINE_SRC) $(SUBDIRS) $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin

 create_build_dir:
 	mkdir -p "$(BUILDDIR)"
 	mkdir -p "$(BUILDDIR)/uip"
 	mkdir -p "$(BUILDDIR)/httpd"
+	mkdir -p "$(BUILDDIR)/machine"

-# Keep machine.c in first position to fail immediately on invalid $MACHINE value
+# Every machine is a pair machine/<MACHINE>.c + machine/<MACHINE>.h. Selecting
+# them by name means no #if/#elif chain, so an unknown or empty $MACHINE is
+# caught here instead of by a #error further down the build.
+$(MACHINE_SRC):
+	@echo "ERROR: MACHINE='$(MACHINE)' has no definition (expected $(MACHINE_SRC))." >&2
+	@echo "       Every machine is one file pair under machine/, named after the" >&2
+	@echo "       MACHINE_* symbol it defines; see machine/*.c for the full list." >&2
+	@echo "       Example: make MACHINE=KP_9000_6XHML_X2" >&2
+	@false
+
+# Keep the per-machine definition in first position to fail immediately on an
+# invalid $MACHINE value
 SRCS = \
-	machine.c \
+	$(MACHINE_SRC) \
 	machine_init.c \
 	cmd_editor.c \
 	cmd_parser.c \
@@ -71,6 +91,8 @@ SRCS = \
 	sfp.c \
 	dns.c \
 	dns_cli.c \
+	ntp.c \
+	ntp_cli.c \
 	syslog.c \
 	udp_apps.c

@@ -87,7 +109,9 @@ SRCS += \
 	rtl837x_port.c \
 	rtl837x_stp.c \
 	rtl837x_lldp.c \
-	rtl837x_storm.c
+	rtl837x_storm.c \
+	rtl837x_lacp.c \
+	rtl837x_trap.c
 SRCS += \
 	httpd/httpd.c \
 	httpd/page_impl.c
@@ -176,15 +200,22 @@ $(BUILDDIR)/rtlplayground-$(FILENAME_EXTENSION).bin: $(BUILDDIR)/rtlplayground.i

 .PHONY: clean distclean all $(SUBDIRS) $(SUBDIRSCLEAN) create_build_dir

+# Every machine/ definition is compiled, so a machine added to machine/ is
+# covered without registering it anywhere. The machine-specific defines are
+# filtered out of $(CC_FLAGS) and supplied per iteration instead, so this also
+# works as "make machine_check MACHINE=...".
+MACHINE_DEFS := $(sort $(patsubst machine/%.c,%,$(wildcard machine/*.c)))
+MACHINE_LESS_CC_FLAGS = $(filter-out -DMACHINE_%,$(CC_FLAGS))
+
 .PHONY:
 machine_check:
 	@mkdir -p $(BUILDDIR)/tmp
 	@set -eo pipefail; \
-	for MACHINE in `grep -E '^[[:space:]]*(//[[:space:]]*)?#define MACHINE_' machine.h | sed -E 's%^[[:space:]]*(//[[:space:]]*)?#define MACHINE_%%' | awk '{print $$1}' | sort -u`; \
+	for MACHINE in $(MACHINE_DEFS); \
 	do \
 	echo "Checking $${MACHINE}"; \
-	$(CC) $(CC_FLAGS) -DMACHINE_$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine.c; \
-	$(CC) $(CC_FLAGS) -DMACHINE_$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine_init.c; \
+	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_$${MACHINE} -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine/$${MACHINE}.c; \
+	$(CC) $(MACHINE_LESS_CC_FLAGS) -DMACHINE_$${MACHINE} -DMACHINE_NAME=$${MACHINE} -MMD -o $(BUILDDIR)/tmp/machine_check -c machine_init.c; \
 	done
 	@rm -rf $(BUILDDIR)/tmp

@@ -359,6 +359,7 @@ The following documents give further documentation on specific features of the R
 - [IGMP (IP-MC streaming)](doc/igmp.md)
 - [SFP+ ports](doc/sfp.md) 
 - [Trunking aka. port aggregation](doc/trunking.md)
+- [LACP (802.3ad link aggregation)](doc/lacp.md)
 - [VLAN](doc/vlan.md)
 - [Storm control](doc/storm_control.md)
 - [Modifications and Flash replacement](doc/mods.md)
@@ -14,14 +14,17 @@
 #include "rtl837x_regs.h"
 #include "rtl837x_sfr.h"
 #include "rtl837x_stp.h"
+#include "rtl837x_lacp.h"
 #include "rtl837x_igmp.h"
 #include "rtl837x_bandwidth.h"
 #include "rtl837x_lldp.h"
 #include "rtl837x_storm.h"
+#include "rtl837x_trap.h"
 #include "sfp.h"
 #include "dhcp.h"
 #include "syslog.h"
 #include "dns.h"
+#include "ntp.h"
 #include "uip/uip.h"
 #include "version.h"

@@ -532,11 +535,21 @@ void parse_lag(void)
 		goto err;

 	if (cmd_compare(2, "d")) {
+		lacp_lag_set(group, 0);
 		port_lag_members_set(group, 0);
 		return;
 	}

 	uint8_t w = 2;
+	__xdata uint8_t lacp_mode = 0;
+	if (cmd_words_len > 2 && cmd_compare(2, "lacp")) {
+		lacp_mode = 1;
+		w = 3;
+		if (cmd_words_len > 3 && cmd_compare(3, "off")) {
+			lacp_lag_set(group, 0);
+			return;
+		}
+	}
 	while (w < cmd_words_len) {
 		// Parse port.
 		if (cmd_parse_port_separator(cmd_words_b[w++]) == 0)
@@ -544,10 +557,15 @@ void parse_lag(void)

 		members |= ((uint16_t)1) << atoi_results_u8;
 	}
+	if (lacp_mode) {
+		lacp_lag_set(group, members);
+	} else {
+		lacp_lag_set(group, 0);
 		port_lag_members_set(group, members);
+	}
 	return;
 err:
-	cmd_error("lag (show | <1-4> (d | <port>...))\n");
+	cmd_error("lag (show | <1-4> (d | [lacp] <port>...))\n");
 }


@@ -845,9 +863,14 @@ void parse_mirror(void)
 	if (cmd_words_len < 2)
 		goto err;

+	// The first argument is the mirroring (monitor) port
+	uint8_t ret = cmd_parse_port(cmd_words_b[1]);
+	if (ret == 0)
+		goto err;
+	mirroring_port = atoi_results_u8;
+
 	uint8_t w = 2;
 	uint8_t port;
-	uint8_t ret;
 	while (w < cmd_words_len) {
 		uint8_t idx = cmd_words_b[w++];
 		ret = cmd_parse_port(idx);
@@ -857,10 +880,6 @@ void parse_mirror(void)
 		idx += ret;
 		port = atoi_results_u8;

-		// Use the first port argument as mirroring_port
-		if (w == 2)
-			mirroring_port = port;
-
 		ret = cmd_buffer[idx];
 		uint16_t pmask = ((uint16_t)1) << port;
 		if (ret != 't')
@@ -1869,6 +1888,8 @@ void cmd_parser(void) __banked
 			parse_syslog();
 		} else if (cmd_compare(0, "dns")) {
 			dns_parse();
+		} else if (cmd_compare(0, "ntp") || cmd_compare(0, "time")) {
+			ntp_parse();
 		} else if (cmd_compare(0, "ip")) {
 			if (cmd_compare(1, "dhcp")) {
 				dhcp_start();
@@ -1969,6 +1990,13 @@ void cmd_parser(void) __banked
 		} else if (cmd_compare(0, "health")) {
 			health_show();
 #endif
+		} else if (cmd_compare(0, "lacp")) {
+			if (cmd_compare(1, "show"))
+				lacp_show();
+			else if (cmd_compare(1, "off"))
+				lacp_off();
+			else
+				cmd_error("lacp (show | off); a group starts LACP with: lag <1-4> lacp <port>...\n");
 		} else if (cmd_compare(0, "pvid")) {
 			if (cmd_words_len == 3 && cmd_parse_port_separator(cmd_words_b[1]) != 0
 			    && atoi_short(cmd_words_b[2]) && atoi_results_short && atoi_results_short <= 4094)
@@ -2019,11 +2047,6 @@ void cmd_parser(void) __banked
 			parse_storm();
 		} else if (cmd_compare(0, "version")) {
 			print_sw_version();
-		} else if (cmd_compare(0, "time")) {
-			print_string("  Tick counter: "); print_long(ticks); print_string("   Sec Counter: ");
-			reg_read_m(RTL837X_REG_SEC_COUNTER);
-			print_sfr_data();
-			write_char('\n');
 		} else if (cmd_compare(0, "history")) {
 			__xdata uint16_t p = (cmd_history_ptr + 1) & CMD_HISTORY_MASK;
 			__xdata uint8_t found_begin = 0;
@@ -2045,9 +2068,11 @@ void cmd_parser(void) __banked
 			if (cmd_compare(1, "on")) {
 				print_string("LLDP enabled\n");
 				lldp_enabled = 1;
+				trap_rma_set(RTL837X_RMA0E_CONF, RTL837X_RMA_ACT_TRAP);
 			} else {
 				print_string("LLDP disabled\n");
 				lldp_enabled = 0;
+				trap_rma_set(RTL837X_RMA0E_CONF, RTL837X_RMA_ACT_FORWARD);
 			}
 		}
 		else {
@@ -73,7 +73,8 @@ uint8_t igmp_packet_handler(void) __banked;
 void igmp_show(void) __banked;
 ```c
 `igmp_setup()` is called at boot-time and configures flooding of all IP-MC packets by
-default, as otherwise no IP-MC would be possible in the network.
+default, as otherwise no IP-MC would be possible in the network. `igmp off` calls it as
+well; groups learned while IGMP was on stay in the table, but are no longer looked up.

 `igmp_enable()`starts IGMP which cause IGMP packets to be handled by the CPU and forwarding
 of IP-MC packets to be limited to only subscribed ports.
@@ -85,6 +86,9 @@ for frames to 01:00:5e:xx:xx:xx and returns 0 when the frame is not a trapped IG
 so that it is passed on to the IP stack. IGMPv1/v2 reports (0x12, 0x16) join the group given
 in the IGMP header, IGMPv2 leaves (0x17) leave it, IGMPv3 reports use the first group record
 (type 4 joins, type 3 leaves). Trapped IGMP frames arrive without a VLAN tag.
+Reports for groups in 224.0.0.0/24 are ignored: the switch floods that block
+even with IGMP on, and an entry for a group such as 224.0.0.251 (mDNS) would
+otherwise limit it to the ports that reported it, as RFC 4541 warns against.

 `igmp_show()` prints out the IGMP configuration on the CLI.

@@ -73,13 +73,14 @@ without being flooded to the other ports. No bridge relays these frames:
 their addresses are in the set that 802.1D-2004 clause 7.12.6 forbids a
 bridge to forward, and what travels the network is the information, with
 every bridge regenerating BPDUs of its own on its designated ports. The reserved-multicast *trap* action
-cannot do that on this hardware, because its destination is an external CPU
-attached to a physical port, which these boards do not populate. The protocol
-modules therefore leave the reserved-multicast action at *forward* and constrain
-the egress with a static L2 multicast entry instead: the lookup hits the entry's
-own port mask rather than the VLAN flood mask. Verified on a SWTGW218AS both
-ways, with the CPU bit cleared, where delivery stops, and with the CPU bit alone,
-where nothing egresses.
+does that: it delivers to the port named in `EXT_CPU_CTRL` (0x6724), which
+`trap_init()` sets to 9, the CPU port, at startup; with the reset value 0xf it
+names no port and the trapped frame is dropped. STP traps its address while it
+runs (see stp.md). Where the action is left at *forward*, the egress can be
+constrained with a static L2 multicast entry instead: the lookup hits the
+entry's own port mask rather than the VLAN flood mask. Verified on a SWTGW218AS
+both ways, with the CPU bit cleared, where delivery stops, and with the CPU bit
+alone, where nothing egresses.

 `port_l2mc_set()` writes one such entry. The SMI layout is the L2 multicast
 variant of the table entry:
@@ -0,0 +1,155 @@
+# LACP (Link Aggregation Control Protocol, IEEE 802.3ad)
+
+A static link aggregation group works only if both ends are configured for the
+same links, and nothing checks that they are. LACP lets the two ends agree on
+which links reach the same partner, aggregates only those, and takes a link out
+of the group when the partner stops answering.
+
+The switch runs LACP in software on the 8051. LACP frames belong to the Slow
+Protocols, with destination `01:80:C2:00:00:02` and ethertype `0x8809`; the
+subtype of LACP frames is 1. The implementation has the Receive, Selection and
+Mux machines of 802.3ad clause 43 and does not aggregate links whose partners
+differ. Up to `LACP_NUM_LAGS` (4) groups can run LACP; the others stay static.
+
+## Getting the frames to the CPU
+
+While LACP runs, the reserved multicast action for `01:80:C2:00:00:02` is
+*trap*, the same mechanism STP uses for its BPDUs, see [stp.md](stp.md). A
+trapped LACPDU has no VLAN tag after the RTL tag, and `TRAP_RX_BODY()` gives the
+offset of the LACPDU in the received frame. When the last group leaves LACP,
+the action goes back to *drop*.
+
+## What has to match across the members
+
+802.3ad requires that every link in an aggregate be full duplex and run at the
+same speed. Beyond the standard, anything that changes how a frame is treated
+has to be identical across members, because the hash picks the member per frame
+and a difference would make the behaviour depend on that choice:
+
+* must match: speed and duplex, VLAN membership and pvid, ingress filtering,
+  port isolation
+* may differ: EEE, LED configuration, counters, cable diagnostics
+
+None of this is enforced yet — `port_lag_members_set()` writes a member mask and
+a hash setting and validates nothing. See #377 for the discussion of whether a
+mismatch should be rejected or applied to the whole group.
+
+## Protocol timing
+
+The timer values are in units of the LACP timer, which steps every four ticks
+of the system clock, 50 times per second:
+
+| Constant             | Value | Time |
+|----------------------|-------|------|
+| `LACP_FAST_PERIODIC` | 50    | 1 s  |
+| `LACP_SLOW_PERIODIC` | 1500  | 30 s |
+| `LACP_SHORT_TIMEOUT` | 200   | 4 s  |
+
+802.3ad specifies a fast periodic time of 1 s with a short timeout of 3 s, and a
+slow periodic time of 30 s with a long timeout of 90 s. The switch transmits at
+the rate the partner asks for with its TIMEOUT bit. Its own timeout is always
+the short one, one second above the standard, so a partner that stops sending
+while its link stays up leaves the trunk after 4 s.
+
+The Partner block of a transmitted LACPDU repeats the partner's actor
+information as it was last received: system priority, system, key, port
+priority, port and state. A Linux partner sets our SYNC only when this block
+matches what it sent.
+
+## LACP API
+
+```
+void lacp_init(void) __banked;
+void lacp_off(void) __banked;
+void lacp_lag_set(uint8_t lag, __xdata uint16_t ports) __banked;
+void lacp_in(void) __banked;
+void lacp_timers(void) __banked;
+void lacp_show(void) __banked;
+```
+
+`lacp_init()` has to run before the startup configuration replays, because xdata
+is not zeroed and the port-to-LAG map uses `0xff` as "no LAG"; a stray zero would
+make a port look like it belongs to LAG 0.
+
+## LACP configuration on the serial console
+
+A group is put under LACP by adding `lacp` to the `lag` command:
+
+```
+lag 1 lacp 7 8      # ports 7 and 8 become LACP candidates of group 1
+lag 1 lacp off      # group 1 leaves LACP, its trunk is cleared (so does "lag 1 lacp")
+lag 1 d             # group 1 disabled, whether it ran LACP or not
+lag 1 7 8           # plain static aggregation, no protocol
+```
+
+A group put under LACP gives up the static trunk it had: the hardware trunk is
+cleared and rebuilt from the ports that converge. The other way round, `lag 1 d`
+and a static member list take the group out of LACP before they touch the
+trunk. A port named in another LACP group moves to the new one. The protocol
+starts with the first group put under LACP and stops when the last one is taken
+out; there is no separate switch for it. Two commands act on the whole engine:
+
+```
+lacp off            # every group leaves LACP, protocol stopped
+lacp show
+```
+
+`lacp show` prints the engine state, then one line per group with its candidate
+ports, the elected aggregator and the trunk members actually programmed into the
+hardware, then one line per port with the actor and partner state bytes and the
+receive-machine state.
+
+## LACP configuration via the Web Interface
+
+Each group on the LAG page has a Static/LACP mode next to its member ports;
+for an LACP group it shows the elected aggregator and the active members. Below
+the groups a table has one row per LACP port with its group, actor and partner
+state, receive state, LACPDU count and partner system. The page reads
+`/lacp.json` every three seconds while it is open. The member checkboxes of a
+static group come from the hardware registers in `/lag.json`.
+
+## A test with a Linux 802.3ad bond
+
+Two ports of the switch to two interfaces of one host:
+
+```
+ip link add bond0 type bond mode 802.3ad
+ip link set enp1s0 down && ip link set enp1s0 master bond0
+ip link set enp2s0 down && ip link set enp2s0 master bond0
+ip link set bond0 up
+```
+
+On the switch, with those two ports as the group:
+
+```
+lag 1 lacp 7 8
+```
+
+`lacp show` should then give both ports an actor state of `0x3f` (ACTIVITY,
+TIMEOUT, AGGREGATION, SYNC, COLLECTING and DISTRIBUTING), a partner state with
+SYNC set, and the partner's system MAC. `lag show` lists the trunk members as
+programmed in the hardware and should show both ports.
+
+On the host, `/proc/net/bonding/bond0` should show the same `Aggregator ID` for
+both slaves; different IDs mean that each link is in a group of its own. Both
+churn states should read `none`.
+
+Further checks:
+
+* `tcpdump -i enp1s0 ether proto 0x8809` on each slave shows the LACPDUs of the
+  switch and of that slave, never those of the other slave.
+* The host log has no `illegal loopback`.
+* The three reserved bytes after the actor state in a LACPDU from the switch
+  are zero.
+
+When one slave goes down, the group narrows to the remaining member, and the
+slave rejoins after it comes back.
+
+## Known limits
+
+* No Churn Detection machines and no Marker protocol.
+* Coupled Mux: collecting and distributing are enabled together.
+* One aggregator per group.
+* Selection compares the partner's system only, not its key: two aggregates
+  that one partner system offers on the same group land in one trunk here.
+* Member compatibility is not validated; see #377.
@@ -227,3 +227,7 @@ iperf Done.
 ```
 As you can see, the total throughput was 4.71 GBit/sec which is close to the
 maximum possible with a single 5GBit link.
+
+## LACP
+
+Dynamic aggregation with LACP is described in [lacp.md](lacp.md).
@@ -0,0 +1,33 @@
+# Time
+
+The switch has no battery backed clock. It counts seconds from power on, and
+it can take the date and time from an NTP server once the network is up. The
+time is lost at every restart and set again at the first synchronisation.
+
+```
+ntp server <name|ip>     # default pool.ntp.org
+ntp interval <1-1440>    # minutes between two synchronisations, default 60
+ntp timezone <+hh:mm>    # offset from UTC, -12:00 to +14:00
+ntp dst off|eu|us        # daylight saving rule
+ntp on
+ntp off
+ntp                      # settings and time
+time                     # local date and time
+```
+
+The client speaks SNTP version 4 and synchronises at once when turned on,
+then after every interval. A server given by name is resolved through the DNS
+resolver before every synchronisation. An answer from an unsynchronised
+server is ignored, and a failed attempt is repeated after 30 seconds.
+
+The local time is UTC plus the time zone offset, plus one hour while daylight
+saving time applies:
+
+* `eu`: from 01:00 UTC on the last Sunday of March to 01:00 UTC on the last
+  Sunday of October;
+* `us`: from 02:00 local time on the second Sunday of March to 02:00 local
+  time on the first Sunday of November.
+
+The same settings, with the current local time and the last synchronisation,
+are in the Time card of the System page. Settings made there or on the
+console are kept only once the configuration is saved.
@@ -35,28 +35,34 @@ BPDUs are addressed to `01:80:C2:00:00:00`, a reserved link-local group. The
 ASIC's Reserved-Multicast action for that address decides what happens to the
 frame.

-Forwarding to the CPU port works normally: the 8051 sits behind an ordinary
-port of the internal switch and is an ordinary member of a forwarding mask.
-The *trap* action does not deliver to it. Its destination is an external CPU
-attached to a physical port (`cpuTag_externalCpuPort_set`, `EXT_CPU_CTRL` in
-the vendor SDK), which these boards do not populate. The ACL trap and
-redirect actions do not deliver to the 8051 either.
+While STP runs, the action is *trap*. A trap delivers to the port named in
+`EXT_CPU_CTRL` (0x6724), whose reset value 0xf names no port, and with that
+value the trapped frame is dropped at ingress. `trap_init()` sets it to 9, the
+port the 8051 sits behind, once at startup. The trap needs no per-VLAN L2
+entries, so it does not depend on which VLANs exist or on the PVIDs, and turning
+STP on no longer walks the whole VLAN table. BPDUs reach the CPU on a port that
+STP holds in blocking with either action: measured on a SWTGW218AS by sending
+BPDUs into a blocked port with forward and with trap, both ports stopped being
+edge and waited out the forward delay. The chip exempts this address from the
+ingress state check; the slow-protocols address used by LACP is not exempt.

-Delivery therefore uses the *forward* action, constrained to the CPU port
-by a static L2 multicast entry (`port_l2mc_set()`), one per VLAN in use:
+A trapped frame reaches the CPU in the format it came in with: unlike a
+forwarded one it has no VLAN tag inserted after the RTL tag, and the RTL tag
+carries the trap reason. `stp_in()` reads the BPDU from the offset
+`TRAP_RX_BODY()` returns, which works for both.

-* while STP runs, the entry's member mask is the CPU port only — BPDUs reach
-  the CPU and are not flooded to other ports, as a participating bridge
-  requires;
-* with STP off, the same entries are retargeted to all ports, restoring the
-  transparency an unmanaged switch is expected to have, so a surrounding
-  spanning tree can span *through* this device.
+With STP off, the action goes back to *forward* and a static L2 multicast
+entry per VLAN in use (`port_l2mc_set()`) targets all ports, restoring the
+transparency an unmanaged switch is expected to have, so a surrounding
+spanning tree can span *through* this device.

-A BPDU delivered this way is an ordinary frame to the port's ingress logic
-and passes through its acceptable-frame-type filter. BPDUs are untagged, so a
-port set to admit tagged frames only (`ingress <port>t`) never delivers one
-to the CPU. `stp_setup()` prints a warning for every STP-enabled port in that
-state.
+The port's acceptable-frame-type filter treats the two actions differently.
+BPDUs are untagged, so a port set to admit tagged frames only
+(`ingress <port>t`) drops a forwarded BPDU before it reaches the CPU, while a
+trapped one passes. Both were measured on a SWTGW218AS with `ingress 3t`:
+LACPDUs, delivered by forward, stopped arriving on port 3, and BPDUs sent into
+the same port, delivered by trap, kept arriving. A port that admits tagged
+frames only therefore takes part in STP.

 ## Link aggregation

@@ -67,6 +67,9 @@ iso_title:"Port isolation",iso_from:"From port",iso_to:"To port",iso_all:"Allow
 iso_intro:"A frame entering a port may only leave through the ports ticked in its row. Isolation is decided before forwarding, so a port that is not ticked is unreachable directly, whatever the address table says.",
 iso_legend:"The cell of the port itself is always allowed. A port number in red marks a port that is not fully open.",
 lag_hash:"Hash:",lag_note:"A LAG needs at least one member to be saved in the startup config; applying an empty group clears it.",
+lacp_heading:"LACP (802.3ad)",lag_mode:"Mode",lag_static:"Static",lacp_neg:"negotiating",lacp_agg:"aggregator",
+lacp_members:"active members",lacp_hint:"LACP: select candidate ports and press Apply to start negotiation",
+lacp_actor:"Actor",lacp_partner:"Partner",lacp_rxstate:"RX state",lacp_rx:"LACPDUs received",lacp_psys:"Partner system",
 lag_clear_q:"Clear LAG {n}?",lag_clear_d:"All member ports return to normal operation.",
 e_title:"Energy Efficient Ethernet",e_adv:"Advertised",e_lp:"Link partner",e_active:"Active",e_enable:"Enable",
 e_note:"Advertised and link-partner flags per speed: 100M, 1G, 2.5G. SFP ports do not support EEE.",
@@ -90,7 +93,14 @@ sy_ip_err:"Invalid IP / netmask / gateway",sy_host_err:"Hostname: 1-23 printable
 sy_net_q:"Apply network settings?",sy_net_d:"The management IP changes to {ip}: this page will need to be reopened there.",
 sy_ip_changed:"IP changed, reconnect at http://{ip}/",sy_dhcp_q:"Switch to DHCP?",
 sy_dhcp_d:"The switch requests an address via DHCP. You must find its new IP to reconnect.",
-sy_sysip_err:"Invalid syslog server IP",sy_dns1:"DNS server",sy_dns2:"Second DNS",sy_dns_err:"Invalid DNS server IP",sy_dns_dhcp:"from DHCP: {ip}",sy_sysport_err:"Syslog port must be 1-65535",
+sy_sysip_err:"Invalid syslog server IP",sy_dns1:"DNS server",sy_dns2:"Second DNS",sy_dns_err:"Invalid DNS server IP",sy_dns_dhcp:"from DHCP: {ip}",
+sy_time:"Time",sy_ntp:"NTP",sy_ntpsrv:"NTP server",sy_ntpsrv_p:"host name or IPv4 address",sy_ntpint:"Poll interval [min]",
+sy_tz:"Time zone",sy_dst:"Daylight saving",sy_dst_eu:"Europe",
+sy_dst_us:"United States",sy_now:"Local time",
+sy_sync:"Last synchronisation",sy_ntpaddr:"Server address",sy_nosync:"not synchronised",sy_waiting:"waiting for the server",
+sy_ago:"{n} min ago",sy_ntp_err:"Enter the host name or IPv4 address of the NTP server",sy_ntpint_err:"Poll interval must be 1-1440",
+sy_time_note:"The switch has no battery backed clock: the time is lost at every restart and set again from the NTP server once the network is up. Save to flash to keep the settings.",
+sy_sysport_err:"Syslog port must be 1-65535",
 sy_pw_len:"Password: 1-20 characters",sy_pw_space:"Password cannot contain spaces",sy_pw_match:"Passwords do not match",
 sy_pw_q:"Change admin password?",sy_pw_d:"Takes effect immediately for new logins. Save to flash to persist.",
 sy_reboot_q:"Reboot the switch?",sy_reboot_d:"There are UNSAVED changes and they will be lost. Save to flash first if you want to keep them.",
@@ -109,6 +119,7 @@ fw_intro:"Upload an RTLPlayground image (512 KiB .bin). The image is staged to f
 fw_upload:"Upload",fw_checking:"{f}: {n} bytes. Checking...",fw_size_err:"size is {n}, expected 524288 (512 KiB)",
 fw_magic_err:"missing bank header / LJMP magic: not a firmware image",fw_crc_err:"CRC16 check failed: corrupt image",
 fw_valid:"valid RTLPlayground image (size, magic and CRC16 OK)",fw_q:"Upload firmware?",
+fw_other:"This image was not built for this switch ({m}): its SFP, LED and button pins may differ. Upload it only if you are sure.",
 fw_d:"On a good checksum the switch resets itself and applies the image during boot (the startup config is preserved). Do not power it off until it comes back.",
 fw_finishing:"finishing flash write... {s} s",fw_uploading:"uploading... {p}% / {s} s",
 fw_verified:"checksum verified, the switch is rebooting...",
@@ -520,6 +531,9 @@ l2_learned:"appris",l2_loading:"chargement...",l2_failed:"chargement non réussi
 l2_del_t:"Supprimer l'entrée",l2_flush_q:"Effacer toutes les entrées MAC apprises?",
 m_title:"Duplication de ports",m_active:"actif",m_monitor:"Port de supervision",m_mirror:"Mirroir",m_both:"RX&TX",
 m_note:"RX&TX = duplique RX et TX du port vers le port de supervision.",m_none:"Selectionnez au moins un port à dupliquer",
+iso_title:"Isolation des ports",iso_from:"Du port",iso_to:"Au port",iso_all:"Tout autoriser",
+iso_intro:"Une trame réseau accédant à un port ne peut repartir que par le port selectionné dans cette ligne. L'isolement est prioritaire sur la retransmission, un port non non coché n'est pas accessible directement, quoi que dit la table d'adresses.",
+iso_legend:"La cellule du port lui-même est toujours autorisée. Une port de couleur rouge indique que celui-ci n'est que partiellement ouvert.",
 lag_hash:"Hachage:",lag_note:"Un groupe d'agrégation de Lien (LAG) nécessite au moins un membre pour être sauvegardé dans la configuration de démarrage; Utiliser un groupe vide fait office de remise à zero.",
 lag_clear_q:"Effacer l'agrégation {n}?",lag_clear_d:"Tous les ports membres vont redevenir normaux.",
 e_title:"Gestion énergétique des ports",e_adv:"Capacités",e_lp:"Capacité du partenaire",e_active:"Actif",e_enable:"Basse consommation",
@@ -560,6 +574,7 @@ fw_intro:"Charge une image RTLPlayground (512 KiB .bin). L'image est envoée en
 fw_upload:"Charger",fw_checking:"{f}: {n} bytes. Vérification...",fw_size_err:"la taille est {n} alors que nous attendons 524288 (512 KiB)",
 fw_magic_err:"Entête de banque de donnée manquant / contrôle LJMP: ce n'est pas une image de firmware",fw_crc_err:"Somme de contrôle erronée: image corrompue",
 fw_valid:"Image RTLPlayground valide (taille, LJMP et somme de contrôle OK)",fw_q:"Chargement du firmware?",
+fw_other:"Cette image n'a pas été prévue pour ce commutateur({m}): La puce, les LED et les boouton peuvent être différents. Poursuivez seulement si vous êtes sûrs de vous.",
 fw_d:"Si la somme de contrôle est correcte, le commutateur va redémarrer tout seul et charger la nouvelle image lors du démarrage (la configuration est préservée). Ne pas éteindre l'appareil avant que les voyants ne s'éteignent.",
 fw_finishing:"Fin d'écriture en mémoire flash... {s} s",fw_uploading:"Chargement... {p}% / {s} s",
 fw_verified:"Somme de contrôle vérifiée, le commutateur redémarre...",
@@ -676,6 +691,7 @@ fw_intro:"Ein RTLPlayground-Image hochladen (.bin, 512 KiB). Das Image wird im F
 fw_upload:"Hochladen",fw_checking:"{f}: {n} Bytes. Wird geprüft...",fw_size_err:"Grösse ist {n}, erwartet 524288 (512 KiB)",
 fw_magic_err:"Bank-Header / LJMP-Kennung fehlt: kein Firmware-Image",fw_crc_err:"CRC16-Prüfung fehlgeschlagen: Image beschädigt",
 fw_valid:"gültiges RTLPlayground-Image (Grösse, Kennung und CRC16 in Ordnung)",fw_q:"Firmware hochladen?",
+fw_other:"Dieses Image wurde nicht für diesen Switch ({m}) gebaut: SFP-, LED- und Tasten-Pins können abweichen. Nur hochladen, wenn du sicher bist.",
 fw_d:"Ist die Prüfsumme korrekt, startet der Switch neu und übernimmt das Image beim Hochfahren (die Startkonfiguration bleibt erhalten). Nicht vom Strom trennen, bis er wieder erreichbar ist.",
 fw_finishing:"Flash wird fertig beschrieben... {s} s",fw_uploading:"wird hochgeladen... {p}% / {s} s",
 fw_verified:"Prüfsumme bestätigt, der Switch startet neu...",
@@ -783,6 +799,8 @@ var CONF_CMDS=[
  /^syslog\s+(on|off)$/,/^syslog\s+ip\s+(\d{1,3}\.){3}\d{1,3}$/,/^syslog\s+port\s+\d{1,5}$/,
  /^session\s+\d{1,5}$/,
  /^dns\s+server\s+(\d{1,3}\.){3}\d{1,3}(\s+(\d{1,3}\.){3}\d{1,3})?$/,
+  /^ntp\s+(on|off)$/,/^ntp\s+server\s+[A-Za-z0-9.-]{1,47}$/,/^ntp\s+interval\s+\d{1,4}$/,
+  /^ntp\s+timezone\s+[+-]?\d{1,2}(:\d{2})?$/,/^ntp\s+dst\s+(off|eu|us)$/,
  /^passwd\s+\S+$/,/^hostname\s+\S{1,23}$/,
  /^vlan\s+\d{1,4}\s+d$/,/^vlan\s+\d{1,4}\s+mgmt$/,
  /^vlan\s+\d{1,4}(\s+[a-zA-Z]\w*)?(\s+\d{1,2}t?)+$/,
@@ -793,7 +811,7 @@ var CONF_CMDS=[
  /^port\s+\d{1,2}\s+lldp\s+(permit|block)+$/,
  /^eee\s+(on|off)(\s+\d{1,2})?(\s+(100m|1g|2g5))?$/,
  /^mirror(\s+\d{1,2})(\s+\d{1,2}[tr]?)+$/,/^mirror\s+off$/,
-  /^lag\s+[1-4](\s+\d{1,2})+$/,/^lag\s+[1-4]\s+d$/,/^laghash\s+[1-4](\s+\w+)+$/,
+  /^lag\s+[1-4](\s+\d{1,2})+$/,/^lag\s+[1-4]\s+d$/,/^lag\s+[1-4]\s+lacp(\s+\d{1,2})+$/,/^lag\s+[1-4]\s+lacp\s+off$/,/^laghash\s+[1-4](\s+\w+)+$/,
  /^isolate\s+\d{1,2}(\s+(off|\d{1,2}))+$/,
  /^stp\s+(on|off)$/,/^stp\s+(prio|hello|maxage|fwd|txhold)\s+\d{1,2}$/,
  /^stp\s+version\s+(rstp|stp)$/,
@@ -1052,7 +1070,11 @@ function renderInfo(){
    if(v==null||v==="")return;
    tb.appendChild(h("tr",null,[h("td",{class:"mut",text:t(r[0])}),h("td",{class:"mono",text:String(v)})]));
  });
-  if(S.info.hostname)$("brandname").textContent=$("brandname").title=S.info.hostname;
+  if(S.info.hostname){
+    $("brandname").textContent=$("brandname").title=document.title=S.info.hostname;
+    // Remembered per switch (each has its own origin) for the login page tab
+    try{localStorage.setItem("rtl_host",S.info.hostname);}catch(e){}
+  }
  if(S.info.sw_ver)$("fver").textContent="RTLPlayground "+S.info.sw_ver;
 }
 function pollInfo(){
@@ -1795,6 +1817,15 @@ function buildLag(){
  for(var g=1;g<=4;g++)(function(g){
    var card=h("div",{class:"card"});
    card.appendChild(h("h2",{text:"LAG "+g}));
+    var mr=h("div",{style:"display:flex;gap:10px;flex-wrap:wrap;align-items:center;margin-bottom:10px",class:"small"});
+    mr.appendChild(h("span",{class:"mut",text:t("lag_mode")}));
+    var ms=h("select",{class:"in",id:"lgm"+g});
+    ms.appendChild(h("option",{value:"static",text:t("lag_static")}));
+    ms.appendChild(h("option",{value:"lacp",text:"LACP"}));
+    ms.addEventListener("change",function(){$("lgs"+g).textContent=ms.value==="lacp"?t("lacp_hint"):""});
+    mr.appendChild(ms);
+    card.appendChild(mr);
+    card.appendChild(h("p",{class:"small mono",id:"lgs"+g,style:"margin-bottom:10px"}));
    var pr=h("div",{style:"display:flex;gap:10px;flex-wrap:wrap;margin-bottom:10px"});
    for(var p=1;p<=S.n;p++)pr.appendChild(h("label",null,[
      h("input",{type:"checkbox",id:"lg"+g+"p"+p}),document.createTextNode(" "+p+" "),
@@ -1807,14 +1838,34 @@ function buildLag(){
    });
    card.appendChild(hr);
    card.appendChild(h("button",{class:"ctl pri",text:t("c_apply"),onclick:function(){lagApply(g)}}));
+    card.addEventListener("change",function(){card.dataset.dirty="1"});
    w.appendChild(card);
  })(g);
 }
+var lacpCfg=[0,0,0,0,0];
+function maskPorts(m){var r=[];for(var p=1;p<=S.n;p++)if((m>>S.physToLog[p-1])&1)r.push(p);return r.length?r.join(" "):"-"}
 function lagLoad(){
-  return getJSON("/lag.json").then(function(s){
+  return getJSON("/lacp.json").then(function(c){
+    var tb=$("lacptbl").tBodies[0];
+    tb.innerHTML="";
+    c.lags.forEach(function(lg,i){
+      var g=i+1;
+      lacpCfg[g]=parseInt(lg.cfg,16);
+      if($("lgm"+g).closest(".card").dataset.dirty)return;
+      $("lgm"+g).value=lacpCfg[g]?"lacp":"static";
+      $("lgs"+g).textContent=lacpCfg[g]?"LACP: "+t("lacp_agg")+" "+(lg.aggValid?lg.agg:"("+t("lacp_neg")+")")+", "+t("lacp_members")+" "+maskPorts(parseInt(lg.members,16)):"";
+    });
+    if(c.on)c.ports.forEach(function(p){
+      if(p.lag===255)return;
+      var tr=tb.insertRow();
+      [p.p,p.lag+1,p.a,p.pt,p.rs,parseInt(p.rx,16),p.psys].forEach(function(v){tr.insertCell().textContent=v});
+    });
+    return getJSON("/lag.json");
+  }).then(function(s){
    s.forEach(function(l){
      var g=l.lagNum+1;
-      var members=parseInt(l.members,2);
+      if($("lgm"+g).closest(".card").dataset.dirty)return;
+      var members=lacpCfg[g]||parseInt(l.members,2);
      for(var p=1;p<=S.n;p++)
        $("lg"+g+"p"+p).checked=!!((members>>S.physToLog[p-1])&1);
      var hash=parseInt(l.hash,16);
@@ -1823,21 +1874,25 @@ function lagLoad(){
  });
 }
 function lagApply(g){
-  var cmd="lag "+g,n=0;
+  var lacp=$("lgm"+g).value==="lacp",cmd="lag "+g+(lacp?" lacp":""),n=0,pre=[];
+  delete $("lgm"+g).closest(".card").dataset.dirty;
  for(var p=1;p<=S.n;p++)if($("lg"+g+"p"+p).checked){cmd+=" "+p;n++;}
-  if(!n){
+  if(!lacp&&lacpCfg[g])pre.push("lag "+g+" lacp off");
+  if(lacp&&!n)cmd="lag "+g+" lacp off";
+  if(!n&&!lacp){
    confirmModal(t("lag_clear_q",{n:g}),t("lag_clear_d"),function(){
-      postCmd("lag "+g+" d").then(lagLoad).catch(function(){});
+      postCmds(pre.concat(["lag "+g+" d"])).then(lagLoad).catch(function(){});
    });
    return;
  }
  var hcmd="laghash "+g,nh=0;
  HASHF.forEach(function(f){if($("lg"+g+"h"+f).checked){hcmd+=" "+f;nh++;}});
-  var cmds=[cmd];
+  var cmds=pre.concat([cmd]);
  if(nh)cmds.push(hcmd);
  postCmds(cmds).then(lagLoad).catch(function(){});
 }
-tabHooks.lag={enter:function(){needPorts(function(){buildLag();lagLoad().catch(function(){})})}};
+var lagPoller=new Poller(function(){return lagLoad().catch(function(){})},3000);
+tabHooks.lag={enter:function(){needPorts(function(){buildLag();lagPoller.start()})},leave:function(){lagPoller.stop()}};


 function lldpLoad(){
@@ -2149,11 +2204,58 @@ $("cfgreload").addEventListener("click",cfgReload);
 $("cfgwrite").addEventListener("click",function(){
  writeConfig($("cfgedit").value,t("cw_title"));
 });
-tabHooks.system={enter:sysLoad};
+var ntpBase=null,ntpTimer=null;
+function tzText(m){var a=Math.abs(m);return(m<0?"-":"+")+String(Math.floor(a/60)).padStart(2,"0")+":"+String(a%60).padStart(2,"0")}
+function ntpTick(){
+  if(!ntpBase)return;
+  var d=new Date(ntpBase.ms+(Date.now()-ntpBase.at));
+  function p(n){return String(n).padStart(2,"0")}
+  $("sy-sync").textContent=t("sy_ago",{n:ntpBase.sync+Math.floor((Date.now()-ntpBase.at)/60000)});
+  $("sy-now").textContent=d.getUTCFullYear()+"-"+p(d.getUTCMonth()+1)+"-"+p(d.getUTCDate())+" "
+    +p(d.getUTCHours())+":"+p(d.getUTCMinutes())+":"+p(d.getUTCSeconds())+" UTC"+ntpBase.tz;
+}
+function ntpLoad(){
+  return api("/cmd",{method:"POST",body:"ntp"}).then(function(r){
+    var m=r.body.match(/NTP (on|off), server (\S*), address ([\d.]+), interval (\d+) min, timezone ([+-]\d\d:\d\d), dst (\w+)/);
+    if(!m)return;
+    var x=r.body.match(/Time (\d{4})-(\d\d)-(\d\d) (\d\d):(\d\d):(\d\d) UTC([+-]\d\d:\d\d)( DST)?, synchronised (\d+) min ago/);
+    $("sy-ntpaddr").textContent=m[3]==="0.0.0.0"?"-":m[3];
+    if(x){
+      ntpBase={at:Date.now(),ms:Date.UTC(+x[1],+x[2]-1,+x[3],+x[4],+x[5],+x[6]),tz:x[7]+(x[8]?" DST":""),sync:+x[9]};
+      ntpTick();
+    }else{
+      ntpBase=null;
+      $("sy-now").textContent=t("sy_nosync");
+      $("sy-sync").textContent=m[1]==="on"?t("sy_waiting"):"-";
+    }
+    if($("sy-ntpcard").dataset.dirty)return;
+    $("sy-ntp").checked=m[1]==="on";$("sy-ntpsrv").value=m[2];$("sy-ntpint").value=m[4];
+    $("sy-tz").value=m[5];$("sy-dst").value=m[6];
+  }).catch(function(){});
+}
+[-720,-660,-600,-570,-540,-480,-420,-360,-300,-240,-210,-180,-120,-60,0,60,120,180,210,240,270,300,330,345,
+ 360,390,420,480,525,540,570,600,630,660,720,765,780,840].forEach(function(z){
+  $("sy-tz").appendChild(h("option",{value:tzText(z),text:"UTC"+tzText(z)}));
+});
+["change","input"].forEach(function(ev){$("sy-ntpcard").addEventListener(ev,function(){this.dataset.dirty="1"})});
+$("sy-ntpapply").addEventListener("click",function(){
+  var srv=$("sy-ntpsrv").value.trim(),iv=$("sy-ntpint").value.trim();
+  if(!/^[A-Za-z0-9.-]{1,47}$/.test(srv)){toast(t("sy_ntp_err"),"err");return;}
+  if(!(+iv>=1&&+iv<=1440)){toast(t("sy_ntpint_err"),"err");return;}
+  delete $("sy-ntpcard").dataset.dirty;
+  postCmds(["ntp server "+srv,"ntp interval "+iv,"ntp timezone "+$("sy-tz").value,"ntp dst "+$("sy-dst").value,
+    "ntp "+($("sy-ntp").checked?"on":"off")]).then(ntpLoad).catch(function(){});
+});
+$("sy-ntprefresh").addEventListener("click",ntpLoad);
+tabHooks.system={
+  enter:function(){sysLoad();ntpLoad();clearInterval(ntpTimer);ntpTimer=setInterval(ntpTick,1000)},
+  leave:function(){clearInterval(ntpTimer)},
+};

 var CONF_OVERWRITE=[
  /^ip\b/,/^gw\b/,/^netmask\b/,/^hostname\b/,
  /^syslog\s+ip\b/,/^syslog\s+port\b/,/^dns\s+server\b/,/^passwd\b/,/^session\b/,
+  /^ntp\s+server\b/,/^ntp\s+interval\b/,/^ntp\s+timezone\b/,/^ntp\s+dst\b/,
  /^vlan\s+\d{1,4}\s+mgmt$/,/^vlan\s+\d{1,4}(?!\s+mgmt\b)/,
  /^pvid\s+\d{1,2}\b/,
  /^port\s+\d{1,2}(?!\s+name\b)/,/^port\s+\d{1,2}\s+name\b/,
@@ -2163,7 +2265,7 @@ var CONF_OVERWRITE=[
  /^stp\s+(port\s+\d{1,2}|lag\s+[1-4])\s+(edge|cost|prio|guard|filter|p2p)\b/,
  /^igmp\b/,/^mtu\s+\d{1,2}\b/,/^storm\s+\d{1,2}\s+(bcast|mcast|ucast|umcast)\b/,
 ];
-var CONF_TOGGLE=[/^(syslog)\s+(on|off)$/,/^(stp)\s+(on|off)$/,/^(stp\s+(port\s+\d{1,2}|lag\s+[1-4]))\s+(on|off)$/];
+var CONF_TOGGLE=[/^(syslog)\s+(on|off)$/,/^(ntp)\s+(on|off)$/,/^(stp)\s+(on|off)$/,/^(stp\s+(port\s+\d{1,2}|lag\s+[1-4]))\s+(on|off)$/];
 function mergeConf(base,texts){
  var conf=base.slice();
  function drop(rx){conf=conf.filter(function(c){return!rx.test(c)})}
@@ -2179,6 +2281,7 @@ function mergeConf(base,texts){
        else drop(/^eee /);
        conf.push(line);return;
      }
+      if((m=line.match(/^lag (\d) lacp off$/))){drop(new RegExp("^lag "+m[1]+" lacp( |$)"));return;}
      if(line==="mirror off"){drop(/^mirror /);return;}
      if(!isConfCmd(line))return;
      if((m=line.match(/^ingress (.+)$/))){
@@ -2273,10 +2376,26 @@ $("saveBtn").addEventListener("click",function(){
  });
 });

-var fwBuf=null;
+var fwBuf=null,fwOther=false;
+// Every image carries its machine name as a NUL-terminated string, the same
+// one the running switch reports as hw_ver: an image without it was built
+// for another board (SFP, LED and button pins differ between machines).
+function fwForThisSwitch(u){
+  var name=S.info.hw_ver;
+  if(!name)return true;
+  var n=[];
+  for(var i=0;i<name.length;i++)n.push(name.charCodeAt(i)&0xff);
+  n.push(0);
+  outer:for(var p=0;p<=u.length-n.length;p++){
+    for(var k=0;k<n.length;k++)if(u[p+k]!==n[k])continue outer;
+    return true;
+  }
+  return false;
+}
 $("fwfile").addEventListener("change",function(){
  var f=this.files[0];
  fwBuf=null;
+  fwOther=false;
  $("fwup").disabled=true;
  $("fwinfo").textContent="";
  if(!f)return;
@@ -2299,13 +2418,15 @@ $("fwfile").addEventListener("change",function(){
      return;
    }
    fwBuf=f;
-    info.innerHTML='<span style="color:var(--ok)">\u2713 '+esc(t("fw_valid"))+"</span>";
+    fwOther=!fwForThisSwitch(u);
+    info.innerHTML='<span style="color:var(--ok)">\u2713 '+esc(t("fw_valid"))+"</span>"+
+      (fwOther?'<br><span style="color:var(--warn)">\u26a0 '+esc(t("fw_other",{m:S.info.hw_ver}))+"</span>":"");
    $("fwup").disabled=false;
  });
 });
 $("fwup").addEventListener("click",function(){
  if(!fwBuf)return;
-  confirmModal(t("fw_q"),t("fw_d"),function(){
+  confirmModal(t("fw_q"),(fwOther?t("fw_other",{m:S.info.hw_ver})+" ":"")+t("fw_d"),function(){
    var form=new FormData();
    form.append("uploadedfile",fwBuf,fwBuf.name);
    var xhr=new XMLHttpRequest();
@@ -356,6 +356,11 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}

    <section class="tab" id="tab-lag">
      <div id="lagwrap" class="grid2"></div>
+      <div class="card" style="margin-top:14px"><h2 data-i18n="lacp_heading">LACP (802.3ad)</h2>
+        <div class="scrollx"><table class="t" id="lacptbl">
+          <thead><tr><th data-i18n="c_port">Port</th><th>LAG</th><th data-i18n="lacp_actor">Actor</th><th data-i18n="lacp_partner">Partner</th><th data-i18n="lacp_rxstate">RX state</th><th data-i18n="lacp_rx">LACPDUs received</th><th data-i18n="lacp_psys">Partner system</th></tr></thead>
+          <tbody></tbody></table></div>
+      </div>
      <p class="small mut" style="margin-top:10px" data-i18n="lag_note">A LAG needs at least one member to be saved in the startup config; applying an empty group clears it.</p>
    </section>

@@ -411,6 +416,22 @@ button.danger{background:var(--bad);color:#fff;border-color:transparent}
            <input class="in" id="sy-sesstmo" style="width:80px" type="number" min="1" max="65535"></label>
          <p class="small mut" data-i18n="sy_services_note">Service state reflects the startup config; runtime state is not readable.</p>
        </div>
+        <div class="card" id="sy-ntpcard"><h2 data-i18n="sy_time">Time</h2>
+          <label class="row" style="justify-content:space-between"><span data-i18n="sy_ntp">NTP</span>
+            <span class="switch"><input type="checkbox" id="sy-ntp"><i></i></span></label>
+          <label class="row"><span class="lb" data-i18n="sy_ntpsrv">NTP server</span><input class="in" id="sy-ntpsrv" maxlength="47" data-i18n-p="sy_ntpsrv_p"></label>
+          <label class="row"><span class="lb" data-i18n="sy_ntpint">Poll interval [min]</span><input class="in sm" id="sy-ntpint" type="number" min="1" max="1440"></label>
+          <label class="row"><span class="lb" data-i18n="sy_tz">Time zone</span><select class="in" id="sy-tz"></select></label>
+          <label class="row"><span class="lb" data-i18n="sy_dst">Daylight saving</span><select class="in" id="sy-dst"><option value="off" data-i18n="c_offc">Off</option><option value="eu" data-i18n="sy_dst_eu">Europe</option><option value="us" data-i18n="sy_dst_us">United States</option></select></label>
+          <div style="display:flex;gap:10px;margin-top:8px">
+            <button class="ctl pri" id="sy-ntpapply" data-i18n="c_apply">Apply</button>
+            <button class="ctl" id="sy-ntprefresh" data-i18n="c_refresh">Refresh</button>
+          </div>
+          <label class="row" style="margin-top:10px"><span class="lb" data-i18n="sy_now">Local time</span><span class="mono" id="sy-now">-</span></label>
+          <label class="row"><span class="lb" data-i18n="sy_sync">Last synchronisation</span><span id="sy-sync">-</span></label>
+          <label class="row"><span class="lb" data-i18n="sy_ntpaddr">Server address</span><span class="mono" id="sy-ntpaddr">-</span></label>
+          <p class="small mut" style="margin-top:8px" data-i18n="sy_time_note">The switch has no battery backed clock.</p>
+        </div>
        <div class="card"><h2 data-i18n="sy_password">Admin password</h2>
          <label class="row"><span class="lb" data-i18n="sy_newpw">New password</span><input class="in" id="sy-pw1" type="password" maxlength="20"></label>
          <label class="row"><span class="lb" data-i18n="sy_repeat">Repeat</span><input class="in" id="sy-pw2" type="password" maxlength="20"></label>
@@ -92,8 +92,12 @@ button:hover{filter:brightness(1.1)}
  try{l=localStorage.getItem("rtl_lang");}catch(e){}
  if(!L[l])l=(navigator.language||"en").slice(0,2);
  var s=L[l]||L.en;
-  document.title=s[0];
-  document.getElementById("hn").textContent=s[0];
+  // Name the tab after the switch: the hostname seen at the last login here,
+  // otherwise the address, so several open switches can be told apart
+  var host=null;
+  try{host=localStorage.getItem("rtl_host");}catch(e){}
+  document.title=(host||location.hostname)+" – "+s[0];
+  document.getElementById("hn").textContent=host||s[0];
  document.getElementById("sub").textContent=s[1];
  document.getElementById("lp").textContent=s[2];
  document.getElementById("lb").textContent=s[3];
@@ -1036,6 +1036,8 @@ void httpd_appcall(void)
 				send_stp();
 			} else if (is_word(q, "/lldp.json")) {
 				send_lldp();
+			} else if (is_word(q, "/lacp.json")) {
+				send_lacp();
 			} else if (is_word(q, "/vlanlist")) {
 				send_vlanlist();
 			} else if (is_word(q, "/config")) {
@@ -14,6 +14,7 @@
 #include "version.h"
 #include "machine.h"
 #include "rtl837x_stp.h"
+#include "rtl837x_lacp.h"
 #include "page_impl.h"
 #include "syslog.h"

@@ -736,6 +737,53 @@ void send_stp(void)
 	slen += strtox(outbuf + slen, "]}");
 }

+void send_lacp(void)
+{
+	dbg_string("send_lacp called\n");
+	slen = strtox(outbuf, HTTP_RESPONCE_JSON);
+
+	slen += strtox(outbuf + slen, "{\"on\":");
+	bool_to_html(lacpEnabled);
+	slen += strtox(outbuf + slen, ",\"lags\":[");
+	for (uint8_t l = 0; l < LACP_NUM_LAGS; l++) {
+		slen += strtox(outbuf + slen, "{\"cfg\":\"");
+		byte_to_html(lacp_lag_ports[l] >> 8);
+		byte_to_html(lacp_lag_ports[l]);
+		slen += strtox(outbuf + slen, "\",\"aggValid\":");
+		bool_to_html(lacp_agg_valid[l]);
+		slen += strtox(outbuf + slen, ",\"agg\":\"");
+		for (uint8_t j = 0; j < MAC_ADDR_LEN; j++)
+			byte_to_html(lacp_agg_sys[l][j]);
+		slen += strtox(outbuf + slen, "\",\"members\":\"");
+		byte_to_html(lacp_members_last[l] >> 8);
+		byte_to_html(lacp_members_last[l]);
+		slen += strtox(outbuf + slen, "\"},");
+	}
+	slen -= 1; // remove comma
+	slen += strtox(outbuf + slen, "],\"ports\":[");
+	for (uint8_t i = machine.min_port; i <= machine.max_port; i++) {
+		slen += strtox(outbuf + slen, "{\"p\":");
+		itoa_html(machine.log_to_phys_port[i]);
+		slen += strtox(outbuf + slen, ",\"lag\":");
+		itoa_html(lacp_port_lag[i]);
+		slen += strtox(outbuf + slen, ",\"a\":\"");
+		byte_to_html(lacp_actor_state[i]);
+		slen += strtox(outbuf + slen, "\",\"pt\":\"");
+		byte_to_html(lacp_partner_state[i]);
+		slen += strtox(outbuf + slen, "\",\"rs\":");
+		itoa_html(lacp_rx_state[i]);
+		slen += strtox(outbuf + slen, ",\"rx\":\"");
+		byte_to_html(lacp_rx_count[i] >> 8);
+		byte_to_html(lacp_rx_count[i]);
+		slen += strtox(outbuf + slen, "\",\"psys\":\"");
+		for (uint8_t j = 0; j < MAC_ADDR_LEN; j++)
+			byte_to_html(lacp_partner_sys[i][j]);
+		slen += strtox(outbuf + slen, "\"},");
+	}
+	slen -= 1; // remove comma
+	slen += strtox(outbuf + slen, "]}");
+}
+
 void send_lldp(void)
 {
 	dbg_string("send_lldp called\n");
@@ -24,6 +24,7 @@ void send_cmd_log(void);
 void send_lag(void);
 void send_stp(void);
 void send_lldp(void);
+void send_lacp(void);
 void send_vlanlist(void);

 /*  Convert only the lower nibble to ascii HEX char.
@@ -3,55 +3,19 @@

 #include <stdint.h>

-/*
- * Select your machine type below
- */
-// Legacy KP-9000 4+2 targets. Prefer the PCB-revision-specific targets below.
-// #define MACHINE_KP_9000_6XHML_X2
-// #define MACHINE_KP_9000_6XH_X2
+#define MACHINE_STR_HELPER(x)  #x
+#define MACHINE_STR(x) MACHINE_STR_HELPER(x)

-// KP-9000 4+2 targets by PCB silkscreen revision.
-// #define MACHINE_KP_9000_6XH_X2_V1_1
-// #define MACHINE_KP_9000_6XHML_X2_V1_1
-// #define MACHINE_KP_9000_6XH_X2_V1_2
-// #define MACHINE_KP_9000_6XHML_X2_V1_2
-// #define MACHINE_KP_9000_6XH_X2_V2_1
-// #define MACHINE_KP_9000_6XHML_X2_V2_1

-// #define MACHINE_KP_9000_6XH_X
-// #define MACHINE_KP_9000_9XH_X_EU
-// #define MACHINE_KP_9000_9XHML_X_V2_2
-// #define MACHINE_KP_9000_9XHML_X_V3_1
-// #define MACHINE_KP_9000_9XHML_X_V3_2
-// #define MACHINE_SWGT024_V2_0_MANAGED
-// #define MACHINE_SWGT024_V2_0_UNMANAGED
-// #define MACHINE_TRENDNET_TEG_S562
-// #define MACHINE_HG0402XG_V1_1
-// #define MACHINE_SWTG018AS_A_V_2_0
-// #define MACHINE_SWTGW218AS
-// #define MACHINE_PCB_SWTG018AS_V2_1_0
-// #define MACHINE_PCB_K0402WS_V3
-// #define MACHINE_PCB_K0402WS_V2
-// #define MACHINE_K0501W_V2_0
-// #define MACHINE_LIANGUO_ZX_SWTGW215AS
-// #define MACHINE_ZX310S_4T2XH
-// #define MACHINE_ZX310S_4T2XT
-// #define MACHINE_STEAMEMO_IG204_V1
-// #define MACHINE_DEFAULT_8C_1SFP
-// #define MACHINE_HI_K0801WS
-// #define MACHINE_FNS1200P
-// #define MACHINE_PCB_SWTG024AS_A_2_0_1
-// #define MACHINE_ONT_S207CW_62TS_SE
-// #define MACHINE_SWTG024AS_A_2_0_1_5C_1SFP
-// #define MACHINE_SWTG024AS_V2_0
-// #define MACHINE_FG_4GT_2SX_V2_0
-// #define MACHINE_FG_8GT_1SX
-// #define MACHINE_LIANGUO_HYWS_SGT0108S
-// #define MACHINE_POE_2G080110GS
-// #define MACHINE_PB_2132
-// #define MACHINE_HASIVO_S600W_4GT_2XGT_SE
-// #define MACHINE_HASIVO_S1100WP_8GT_1SX_SE
-// #define MACHINE_F7008_2_5
+#define MACHINE_DEF_DIR machine
+
+#ifndef MACHINE_NAME
+	#define MACHINE_NAME default_machine
+#endif
+
+#define MACHINE_INC(dir,file) MACHINE_STR(dir/file)
+
+#include  MACHINE_INC(MACHINE_DEF_DIR,MACHINE_NAME.h)

 #define LED_27 1
 // SYSTEM LED
@@ -0,0 +1,25 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	.led_sets = { { LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
+			LEDS_2G5 | LEDS_LINK,
+			LEDS_1G | LEDS_LINK,
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT },
+		    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_DEFAULT_8C_1SFP_H_
+#define _MACHINE_DEFAULT_8C_1SFP_H_
+
+#define MACHINE_MODEL "8+1 SFP Port Switch"
+
+#endif
@@ -0,0 +1,41 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{	/* SET0 */
+			LEDS_2G5 | LEDS_LINK,				/* LEDID0 - green: 2.5G link */
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,	/* LEDID1 - yellow: traffic */
+			0,
+			0,
+		},
+		{	/* SET1 - SFP+ */
+			LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_LINK,
+			LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+		},
+	},
+	.led_mux_custom = 1,
+	.led_mux = {
+		0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x02,
+		0x0d, 0x10, 0x11, 0x02, 0x14, 0x02, 0x02, 0x15,
+		0x02, 0x02, 0x18, 0x02, 0x02, 0x19, 0x02, 0x02,
+		0x1c, 0x1d, 0x02, 0x02,
+	},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_F7008_2_5_H_
+#define _MACHINE_F7008_2_5_H_
+
+#define MACHINE_MODEL "F7008-2.5 8+1 SFP Port Switch"
+
+#endif
@@ -0,0 +1,66 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38, 
+	.sfp_port[0].pin_los = GPIO_NA, 
+	.sfp_port[0].sds = 1, 
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA, 
+	.sfp_port[1].sds = 0, 
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	/* Ports 1-4 RJ45 use set 0, port 5-6 SFP uses set 1 
+	 * Ports 1-4: Green: 2.5GBit, Amber: 10/100/1000MBit
+	 * Ports 5-6: Green: 100MBit-10GBit
+	 */
+	.led_sets = { 
+			{
+				LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				LEDS_2G5 | LEDS_LINK | LEDS_ACT
+			},
+			{  
+				LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				LEDS_10G | LEDS_LINK,
+				0,
+				LEDS_COL | LEDS_DUPLEX
+			},
+			{
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				LEDS_2G5 | LEDS_1G | LEDS_LINK,
+				LEDS_5G | LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+				LEDS_10G | LEDS_LINK | LEDS_ACT
+			},
+			{
+				LEDS_TX,
+				LEDS_RX,
+				LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
+					LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_ACT,
+				LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5 |
+					LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x3f, 0x15, 0x16,
+				0x18, 0x0e, 0x19, 0x11, 0x12, 0x1a, 0x15, 0x16, 0x1c, 0x19,
+				0x1a, 0x1d, 0x1d, 0x1e, 0x1e, 0x20, 0x21, 0x22
+		},
+	};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_FG_4GT_2SX_V2_0_H_
+#define _MACHINE_FG_4GT_2SX_V2_0_H_
+
+#define MACHINE_MODEL "FG-4GT-2SX_V2.0"
+
+#endif
@@ -0,0 +1,45 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		/*
+			Ports 1-8: Left Amber 10/100/1000MBit (Vendor no 10M, but we add it)
+					   Right Green 2.5GBit
+			SFP-port: Any speed
+		*/
+		{
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+		},
+		{
+			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0,
+		},
+	},
+	.led_mux_custom = 1,
+	.led_mux = {
+		0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x09, 0x0d, 0x10,
+		0x11, 0x0e, 0x14, 0x11, 0x12, 0x15, 0x15, 0x16, 0x18, 0x19,
+		0x1a, 0x19, 0x1d, 0x1e, 0x1c, 0x1d, 0x20, 0x21,
+	},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_FG_8GT_1SX_H_
+#define _MACHINE_FG_8GT_1SX_H_
+
+#define MACHINE_MODEL "FG-8GT-1SX"
+
+#endif
@@ -0,0 +1,55 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 2,
+    .log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+    .phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+
+    /* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
+    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    /* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
+    .sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+    .sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
+    .sfp_port[1].pin_tx_disable = GPIO_NA,
+    .sfp_port[1].sds = 0,
+    .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+
+    .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+
+    /* Copper ports use SET0; SFP ports use SET1 */
+    .port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},
+
+    .led_sets = {
+        {   /* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+            0,
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0
+        },
+        {   /* SET1: SFP — all speeds link/act */
+            LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0,
+            0, 0
+        },
+    },
+
+    .led_mux_custom = 1,
+    .led_mux = {
+        0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,  /* GPIO0-7: unused */
+        0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12,          /* GPIO8-14 */
+        0x14, 0x15, 0x16, 0x18, 0x19, 0x1a,                 /* GPIO15-20 */
+        0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23            /* GPIO21-27 */
+    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_FNS1200P_H_
+#define _MACHINE_FNS1200P_H_
+
+#define MACHINE_MODEL "FNS-1200P"
+
+#endif
@@ -0,0 +1,32 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.mac_flash_offset = 0x1FC000,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green LED (right)
+					0,
+					LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber LED (left)
+					0
+				  },
+				  { LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED
+					0, 
+					0,
+					0
+				  },
+				},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HASIVO_S1100WP_8GT_1SX_SE_H_
+#define _MACHINE_HASIVO_S1100WP_8GT_1SX_SE_H_
+
+#define MACHINE_MODEL "Hasivo S1100WP-8GT-1SX-SE"
+
+#endif
@@ -0,0 +1,43 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 0,
+    .n_10g = 2,
+    .log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+    .phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 0},
+    .reset_pin = GPIO54_ACL_BIT2_EN,
+    .high_leds = { .mux = LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+    .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1 },
+    /* Ports 1-4: Green: 2.5GBit, Orange: 10/100/1000MBit
+     * Ports 5-6: Green: 10GBit, Orange: 5/2.5GBit, None: 10/100/1000MBit
+     */
+    .led_sets = {
+        {
+            LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Yellow
+            LEDS_2G5 | LEDS_LINK, // Green
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK, // Orange
+            0, // Unused
+        },
+        {
+            LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Yellow
+            LEDS_10G | LEDS_LINK, // Green
+            LEDS_5G | LEDS_2G5 | LEDS_LINK, // Orange
+            0, // Unused
+        },
+    },
+    .led_mux_custom = 1,
+    .led_mux = {
+        0x3f, 0x3f, 0x3f, 0x3f, 0x3f,
+        0x3f, 0x3f, 0x3f, 0x0f, 0x20,
+        0x21, 0x22, 0x10, 0x11, 0x12,
+        0x14, 0x15, 0x16, 0x18, 0x19,
+        0x1a, 0x1c, 0x1d, 0x1e, 0x0c,
+        0x0d, 0x0e, 0x23
+    },
+
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HASIVO_S600W_4GT_2XGT_SE_H_
+#define _MACHINE_HASIVO_S600W_4GT_2XGT_SE_H_
+
+#define MACHINE_MODEL "Hasivo S600W-4GT-2XGT-SE"
+
+#endif
@@ -0,0 +1,38 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = 50,
+	.sfp_port[0].pin_los = 10,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+	.sfp_port[1].pin_detect = 30,
+	.sfp_port[1].pin_los = 51,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 , .enable = LED_27 | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	/* The Ethernet ports have 1 amber LED (left) and 1 green LED (right)
+	 * The SFP ports have also 1 amber LED and 1 green LED
+	 * Ethernet ports use LED-set 0, SFP ports use LED-set 1
+	 */
+	.led_sets = { { LEDS_10M | LEDS_LINK | LEDS_ACT,
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			0 },
+			{ LEDS_100M | LEDS_10M | LEDS_LINK,
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			LEDS_10G | LEDS_LINK,
+			0 },
+		    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HG0402XG_V1_1_H_
+#define _MACHINE_HG0402XG_V1_1_H_
+
+#define MACHINE_MODEL "HG0402XG V1.1"
+
+#endif
@@ -0,0 +1,46 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38, 
+	.sfp_port[0].pin_los = GPIO_NA, 
+	.sfp_port[0].sds = 1, 
+	.sfp_port[0].i2c =  I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA, 
+	.sfp_port[1].sds = 0, 
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = { 
+			{
+				LEDS_2G5 | LEDS_LINK | LEDS_10M | LEDS_ACT,
+				LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+				LEDS_1G | LEDS_LINK, 
+				0 
+			},
+			{  
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK,
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_ACT,
+				0,
+				0
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+		},
+	};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HI_K0402WS_H_
+#define _MACHINE_HI_K0402WS_H_
+
+#define MACHINE_MODEL "PCB-K0402WS-V3.0"
+
+#endif
@@ -0,0 +1,45 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 1,
+    .min_port = 0,
+    .max_port = 8,
+    .n_sfp = 1,
+    .log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+    .phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+    .reset_pin = GPIO_NA,
+
+    .high_leds = {
+        .mux = LED_27 | LED_29,
+        .enable = LED_28_SYS | LED_29
+    },
+
+    /* Ports 1-8 use set 0, port 9 SFP uses set 1 */
+    .port_led_set = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .led_sets = {
+        {   /* Set 0: RJ45 copper ports
+             * Amber = 2.5G
+             * Green = 1G/100M/10M with activity
+             */
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT, /* Amber */
+            0,
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* Green */
+            0
+        },
+        {   /* Set 1: SFP port, single green LED for all valid speeds */
+            LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0,
+            0,
+            0
+        },
+    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_HI_K0801WS_H_
+#define _MACHINE_HI_K0801WS_H_
+
+#define MACHINE_MODEL "Hi-Source HI-k0801WS"
+
+#endif
@@ -0,0 +1,34 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c =  I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO_NA,
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			0,
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0
+		},
+		{
+			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0
+		},
+	 },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_K0501W_V2_0_H_
+#define _MACHINE_K0501W_V2_0_H_
+
+#define MACHINE_MODEL "K0501W V2.0"
+
+#endif
@@ -0,0 +1,37 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
+	// Left SFP port (5)
+	.sfp_port[0].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+	.sfp_port[0].pin_los = GPIO10_LED10,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 0,
+	.sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+	// Right SFP port (6)
+	.sfp_port[1].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[1].pin_los = GPIO37,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 1,
+	.sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	/* Conditions for LED on:
+	 * dual led orange: ledset_0 & ledset_2
+	 * dual led green: ledset_2 & !ledset_0
+	 * single right led green: ledset_0 & !ledset_1
+	*/
+	.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			LEDS_2G5 | LEDS_LINK | LEDS_10G,
+			LEDS_1G | LEDS_LINK,
+			0 },
+		    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_H_
+#define _MACHINE_KP_9000_6XHML_X2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML-X2"
+
+#endif
@@ -0,0 +1 @@
+KP_9000_6XHML_X2.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_V1_1_H_
+#define _MACHINE_KP_9000_6XHML_X2_V1_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML V1.1"
+
+#endif
@@ -0,0 +1 @@
+KP_9000_6XHML_X2.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_V1_2_H_
+#define _MACHINE_KP_9000_6XHML_X2_V1_2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML V1.2"
+
+#endif
@@ -0,0 +1 @@
+KP_9000_6XH_X2.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XHML_X2_V2_1_H_
+#define _MACHINE_KP_9000_6XHML_X2_V2_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XHML V2.1"
+
+#endif
@@ -0,0 +1,28 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	/* Conditions for LED on:
+	 * dual led orange: ledset_0 & ledset_2
+	 * dual led green: ledset_2 & !ledset_0
+	 * single right led green: ledset_0 & !ledset_1
+	*/
+	.led_sets = { { LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			LEDS_2G5 | LEDS_LINK | LEDS_10G,
+			LEDS_1G | LEDS_LINK,
+			0 },
+		    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X_H_
+#define _MACHINE_KP_9000_6XH_X_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH-X"
+
+#endif
@@ -0,0 +1,48 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+
+	// Left SFP port
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	// Right SFP port
+	.sfp_port[1].pin_detect = GPIO37,
+	.sfp_port[1].pin_los = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO48_I2C_SCL1,   // Button-Switch is unpopulated on PCB, but can be added manually (hole in case is already there)
+	.high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+			{
+				LEDS_2G5 | LEDS_LINK,												// Left LED (Amber)
+				LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,   // Right LED (Green)
+				0,
+				0
+			},
+			{
+				LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				0,
+				0
+			},
+	 },
+	.led_mux_custom = 1,
+	.led_mux = {
+				0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,
+				0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,
+				0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+		},
+	};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X2_H_
+#define _MACHINE_KP_9000_6XH_X2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH-X2"
+
+#endif
@@ -0,0 +1 @@
+KP_9000_6XHML_X2.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X2_V1_1_H_
+#define _MACHINE_KP_9000_6XH_X2_V1_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH V1.1"
+
+#endif
@@ -0,0 +1 @@
+KP_9000_6XHML_X2.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X2_V1_2_H_
+#define _MACHINE_KP_9000_6XH_X2_V1_2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH V1.2"
+
+#endif
@@ -0,0 +1 @@
+KP_9000_6XH_X2.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_6XH_X2_V2_1_H_
+#define _MACHINE_KP_9000_6XH_X2_V2_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-6XH-X2 V2.1"
+
+#endif
@@ -0,0 +1,51 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = { 1, 2, 3, 4, 5, 6, 7, 8, 9 },
+	.phys_to_log_port = { 0, 1, 2, 3, 4, 5, 6, 7, 8 },
+	.is_sfp = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
+	.led_sets = {
+		{   /* Set 0 for RJ45 connectors */
+			/* LED0: Right Green */
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			/* LED1: Left Orange */
+			LEDS_2G5 | LEDS_LINK,
+			/* LED2: Left Green */
+			LEDS_1G | LEDS_LINK,
+			/* LED3: None */
+			0,
+		}, { /* Set 1 for SFP port */
+			/* LED0: Single Green "9" LED */
+			LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
+			/* LED1: D23 LED on PCB */
+			LEDS_1G | LEDS_LINK,
+			/* LED2: D22 LED on PCB */
+			LEDS_2G5 | LEDS_LINK,
+			/* LED3: Unused */
+			LEDS_COL | LEDS_DUPLEX,
+		}, { /* Set 2: Unused, but set to same things as stock firmware for consistency */
+			LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			LEDS_1G | LEDS_LINK | LEDS_ACT,
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT | LEDS_5G,
+			LEDS_10G | LEDS_ACT | LEDS_LINK,
+		}, { /* Set 3: Unused, but set to same things as stock firmware for consistency */
+			LEDS_TX,
+			LEDS_RX,
+			LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
+			LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
+		},
+	},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_9XHML_X_V2_2_H_
+#define _MACHINE_KP_9000_9XHML_X_V2_2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-9XHML-X V2.2"
+
+#endif
@@ -0,0 +1,37 @@
+#include "machine_defs.h"
+
+// 2M-PCB23-V3.2 is wired like V3.1 (SFP detection, LEDs, factory MAC location)
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO48_I2C_SCL1,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{   /* RJ45: First LED, yellow, second LED: green */
+			LEDS_2G5 | LEDS_LINK,
+            LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+		}, { /* SFP PORT, SINGLE GREEN LED */
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			0,
+			0,
+			0,
+		}},
+	.led_mux_custom = 1,
+	.led_mux = {0x00, 0x01, 0x04, 0x05, 0x08, 0x09, 0x0c, 0x09, 0x0d, 0x10,
+				0x11, 0x0e, 0x14, 0x11, 0x12, 0x15, 0x15, 0x16, 0x18, 0x19,
+				0x1a, 0x19, 0x1d, 0x1e, 0x1c, 0x1d, 0x20, 0x21},
+	.mac_flash_offset = 0x1FC000,
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_9XHML_X_V3_1_H_
+#define _MACHINE_KP_9000_9XHML_X_V3_1_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-9XHML-X V3.1"
+
+#endif
@@ -0,0 +1 @@
+KP_9000_9XHML_X_V3_1.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_9XHML_X_V3_2_H_
+#define _MACHINE_KP_9000_9XHML_X_V3_2_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-9XHML-X V3.2"
+
+#endif
@@ -0,0 +1,25 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 0},
+	.led_sets = { { LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
+			LEDS_2G5 | LEDS_LINK,
+			LEDS_1G | LEDS_LINK, 
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT },
+		    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_KP_9000_9XH_X_EU_H_
+#define _MACHINE_KP_9000_9XH_X_EU_H_
+
+#define MACHINE_MODEL "keepLink KP-9000-9XH-X-EU"
+
+#endif
@@ -0,0 +1,36 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 1,
+    .min_port = 0,
+    .max_port = 8,
+    .n_sfp = 1,
+    .log_to_phys_port = {2, 1, 4, 3, 5, 6, 7, 8, 9},
+    .phys_to_log_port = {1, 0, 3, 2, 4, 5, 6, 7, 8},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+	.high_leds = { .mux = 0, .enable = 0 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1 },
+	.led_sets = { 
+		{ 
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // RJ45 Blue LEDs
+			LEDS_2G5 | LEDS_LINK, // RJ45 White LEDs
+			0,
+			0
+		},
+		{ 
+			LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // SFP blue LED?
+			0,
+			0,
+			0
+		},
+	},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_LIANGUO_HYWS_SGT0108S_H_
+#define _MACHINE_LIANGUO_HYWS_SGT0108S_H_
+
+#define MACHINE_MODEL "Lianguo HYWS-SGT0108S"
+
+#endif
@@ -0,0 +1,33 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.mac_flash_offset = 0x1FC000,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+	.phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green LED (right)
+					0, // unused
+					LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber LED (left)
+					0
+				  }, // unused
+				  { LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED
+					0, // unused
+					0, // unused
+					0
+				  }, // unused		    	},
+				},
+	.led_mux_custom = 0,
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_LIANGUO_ZX_SWTGW215AS_H_
+#define _MACHINE_LIANGUO_ZX_SWTGW215AS_H_
+
+#define MACHINE_MODEL "Lianguo ZX-SWTGW215AS"
+
+#endif
@@ -0,0 +1,61 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 2,
+    .log_to_phys_port = {0, 0, 0, 5, 4, 3, 2, 1, 6},
+    .phys_to_log_port = {7, 6, 5, 4, 3, 8, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
+
+    // SFP port on SDS0 / logical port 3
+    .sfp_port[0].pin_detect = GPIO37,
+    .sfp_port[0].pin_los = GPIO_NA,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 0,
+    .sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+    // SFP port on SDS1 / logical port 8
+    .sfp_port[1].pin_detect = GPIO38,
+    .sfp_port[1].pin_los = GPIO_NA,
+    .sfp_port[1].pin_tx_disable = GPIO_NA,
+    .sfp_port[1].sds = 1,
+    .sfp_port[1].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+    .high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+    .port_led_set = { 0, 0, 0, 3, 0, 0, 2, 2, 3},
+    .mac_flash_offset = 0x1FC000,
+    .led_sets = {
+        { // RJ45 Ports 3-4 (normal wiring)
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+            0,
+            0
+        },
+        { // Unused
+            0,
+            0,
+            0,
+            0
+        },
+        { // RJ45 Ports 1-2 (reversed wiring)
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0,
+            0
+        },
+        { // SFP Ports 5-6
+            LEDS_10G | LEDS_LINK | LEDS_ACT,
+            LEDS_2G5 | LEDS_1G | LEDS_LINK | LEDS_ACT,
+            0,
+            0
+        },
+    },
+    .led_mux_custom = 1,
+    .led_mux = {
+        0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_ONT_S207CW_62TS_SE_H_
+#define _MACHINE_ONT_S207CW_62TS_SE_H_
+
+#define MACHINE_MODEL "ONT-S207CW-62TS-SE / Binardat 2G06-04210GSM / Binardat 2G06-04210GS"
+
+#endif
@@ -0,0 +1,41 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+	.reset_pin = GPIO_NA,
+
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+
+	.led_sets = {
+		{
+			/* LED0 = RJ45: Amber LED: 2.5G */
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			/* LED1 = RJ45: Green LED: 10M / 100M / 1000M */
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0
+		},
+		{
+			/* SFP+ single Green LED. */
+			LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0
+		},
+	},
+ };
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_PB_2132_H_
+#define _MACHINE_PB_2132_H_
+
+#define MACHINE_MODEL "PB-2132"
+
+#endif
@@ -0,0 +1,55 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 2,
+    .log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+    .phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+
+    /* Left SFP (logical 8, SDS1): GPIO30=ModAbs, GPIO37=RX_LOS */
+    .sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    /* Right SFP (logical 3, SDS0): GPIO50=ModAbs, GPIO51=RX_LOS */
+    .sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+    .sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
+    .sfp_port[1].pin_tx_disable = GPIO_NA,
+    .sfp_port[1].sds = 0,
+    .sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+
+    .high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+
+    /* Copper ports use SET0; SFP ports use SET1 */
+    .port_led_set = {0, 0, 0, 1, 0, 0, 0, 0, 1},
+
+    .led_sets = {
+        {   /* SET0: copper — LED0=amber (2.5G), LED2=green (1G/100M/10M) */
+            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+            0,
+            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0
+        },
+        {   /* SET1: SFP — all speeds link/act */
+            LEDS_10G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+            0,
+            0, 0
+        },
+    },
+
+    .led_mux_custom = 1,
+    .led_mux = {
+        0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f,  /* GPIO0-7: unused */
+        0x0f, 0x0c, 0x0d, 0x0e, 0x10, 0x11, 0x12,          /* GPIO8-14 */
+        0x14, 0x15, 0x16, 0x18, 0x19, 0x1a,                 /* GPIO15-20 */
+        0x1c, 0x1d, 0x1e, 0x20, 0x21, 0x22, 0x23            /* GPIO21-27 */
+    },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_PCB_K0402WS_V2_H_
+#define _MACHINE_PCB_K0402WS_V2_H_
+
+#define MACHINE_MODEL "PCB-K0402WS-V2.0"
+
+#endif
@@ -0,0 +1 @@
+HI_K0402WS.c
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_PCB_K0402WS_V3_H_
+#define _MACHINE_PCB_K0402WS_V3_H_
+
+#define MACHINE_MODEL "PCB-K0402WS-V3.0"
+
+#endif
@@ -0,0 +1,42 @@
+#include "machine_defs.h"
+
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.mac_flash_offset = 0x1FC000,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,   // pulled low on module insert
+	.sfp_port[0].pin_los = GPIO_NA,     // no LOS pin wired
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	// LED wiring matches the SWTG018AS-A V2.0 (same PCB family)
+	.led_sets = {
+		{   /* RJ45: First LED, yellow, second LED: green */
+			LEDS_2G5 | LEDS_LINK,
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+		}, { /* SFP set (superseded by the raw register override in machine_custom_init) */
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			0,
+			0,
+			0,
+		}},
+	.led_mux_custom = 1,
+	.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, // 65e0
+		     0x09, 0x0c, 0x09, 0x0d, 0x10, // 65e4
+		     0x11, 0x0e, 0x14, 0x11, 0x12, // 65e8
+		     0x15, 0x15, 0x16, 0x18, 0x19, // 65ec
+		     0x1a, 0x19, 0x1d, 0x1e, 0x1c, // 65f0
+		     0x1d, 0x20, 0x21 },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_PCB_SWTG018AS_V2_1_0_H_
+#define _MACHINE_PCB_SWTG018AS_V2_1_0_H_
+
+#define MACHINE_MODEL "SWTGW218AS (SWTG018AS-V2.1.0)"
+
+#endif
@@ -0,0 +1,48 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 2,
+    .log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+    .phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
+
+    // SFP port on SDS0 / logical port 3
+    .sfp_port[0].pin_detect = GPIO37,
+    .sfp_port[0].pin_los = GPIO_NA,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 0,
+    .sfp_port[0].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+
+    // SFP port on SDS1 / logical port 8
+    .sfp_port[1].pin_detect = GPIO38,
+    .sfp_port[1].pin_los = GPIO_NA,
+    .sfp_port[1].pin_tx_disable = GPIO_NA,
+    .sfp_port[1].sds = 1,
+    .sfp_port[1].i2c =  I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+    .high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+    .port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+    .led_sets = {
+                    {
+                            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+                            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+                            LEDS_DUPLEX,
+                            LEDS_2G5 | LEDS_LINK | LEDS_ACT
+                    },
+                    {
+                            LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
+                            LEDS_10G | LEDS_LINK | LEDS_ACT,
+                            LEDS_2G5 | LEDS_LINK,
+                            LEDS_COL | LEDS_DUPLEX
+                    },
+     },
+    .led_mux_custom = 1,
+    .led_mux = {
+                            0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+            },
+    };
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_PCB_SWTG024AS_A_2_0_1_H_
+#define _MACHINE_PCB_SWTG024AS_A_2_0_1_H_
+
+#define MACHINE_MODEL "PCB-SWTG024AS-A-2.0.1"
+
+#endif
@@ -0,0 +1,44 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{
+			/* SET0: RJ45  2.5G = amber, 1G/100M/10M = green */
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT, /* amber */
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, /* green */
+			0,
+			0
+		},
+		{
+			/* SET1: SFP+ port = green */
+			LEDS_2G5 | LEDS_TWO_PAIR_1G | LEDS_1G | LEDS_500M | LEDS_100M | LEDS_10M |
+				LEDS_LINK | LEDS_ACT | LEDS_10G | LEDS_TWO_PAIR_5G | LEDS_5G | LEDS_TWO_PAIR_2G5,
+			0,
+			0,
+			0
+		}
+	},
+	.led_mux_custom = 1,
+	.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08,
+			0x09, 0x0c, 0x09, 0x0d, 0x10,
+			0x11, 0x0e, 0x14, 0x11, 0x12,
+			0x15, 0x15, 0x16, 0x18, 0x19,
+			0x1a, 0x19, 0x1d, 0x1e, 0x1c,
+			0x1d, 0x20, 0x21 },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_POE_2G080110GS_H_
+#define _MACHINE_POE_2G080110GS_H_
+
+#define MACHINE_MODEL "MokerLink POE-2G080110GS"
+
+#endif
@@ -0,0 +1,50 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	// Left SFP port (5)
+	// LED pin 9
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	// Right SFP port (6)
+	// LED pin 24
+	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+	.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux =  LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+			{
+				// RJ45 Amber LED (left)
+				LEDS_2G5 | LEDS_LINK,
+				// RJ45 Green LED (Right)
+				LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+				0,
+				0,
+			},
+			{
+				// SFP LED
+				LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
+				0, // unused
+				0, // unused
+				0
+			},
+		},
+	.led_mux_custom = 1,
+	.led_mux = {
+		0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x3f, 0x0f, 0x20, 0x0d, 0x0e, 0x10, 0x11, 0x12, 0x14, 0x15, 0x16, 0x18, 0x19, 0x1a, 0x1c, 0x1d, 0x1e, 0x0c, 0x21, 0x22, 0x23
+	},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_STEAMEMO_IG204_V1_H_
+#define _MACHINE_STEAMEMO_IG204_V1_H_
+
+#define MACHINE_MODEL "Steamemo IG204 V1"
+
+#endif
@@ -0,0 +1,41 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp= {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	// Left SFP port (J4)
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 39 */
+	// Right SFP port (J2)
+	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+	.sfp_port[1].pin_los = GPIO_NA,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 40 */
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{ /* RJ45: Green LED */
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			0,
+			/* Amber LED */
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			0
+		}, { /* SFP PORT: SINGLE GREEN LED */
+			LEDS_10M | LEDS_100M | LEDS_1G | LEDS_2G5 | LEDS_10G | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0,
+		},
+	},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_SWGT024_V2_0_MANAGED_H_
+#define _MACHINE_SWGT024_V2_0_MANAGED_H_
+
+#define MACHINE_MODEL "SWGT024 V2.0 Managed"
+
+#endif
@@ -0,0 +1,41 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp= {0, 0, 0, 2, 0, 0, 0, 0, 1},
+	// Left SFP port (J4)
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 39 */
+	// Right SFP port (J2)
+	.sfp_port[1].pin_detect = GPIO50_I2C_SCL2_UART1_TX,
+	.sfp_port[1].pin_los = GPIO51_I2C_SDA2_UART1_RX,
+	.sfp_port[1].pin_tx_disable = GPIO_NA,
+	.sfp_port[1].sds = 0,
+	.sfp_port[1].i2c = I2CBUS( GPIO41_I2C_SDA3_MDIO1, GPIO40_I2C_SCL3_MDC1 ), /* GPIO 40 */
+	.reset_pin = GPIO_NA,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{ /* RJ45: Green LED */
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			0,
+			/* Amber LED */
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+			0
+		}, { /* SFP PORT: SINGLE GREEN LED */
+			LEDS_10M | LEDS_100M | LEDS_1G | LEDS_2G5 | LEDS_10G | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+			0,
+		},
+	},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_SWGT024_V2_0_UNMANAGED_H_
+#define _MACHINE_SWGT024_V2_0_UNMANAGED_H_
+
+#define MACHINE_MODEL "SWGT024 V2.0 Unmanaged"
+
+#endif
@@ -0,0 +1,39 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO_NA,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO48_I2C_SCL1,
+	.high_leds = { .mux = LED_27 | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{   /* RJ45: First LED, yellow, second LED: green */
+			LEDS_2G5 | LEDS_LINK,
+            LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+			0,
+			0,
+		}, { /* SFP PORT, SINGLE GREEN LED */
+			LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT | LEDS_10G,
+			0,
+			0,
+			0,
+		}},
+	.led_mux_custom = 1,
+	.led_mux = { 0x00, 0x01, 0x04, 0x05, 0x08, // 65e0
+		     0x09, 0x0c, 0x09, 0x0d, 0x10, // 65e4
+		     0x11, 0x0e, 0x14, 0x11, 0x12, // 65e8
+		     0x15, 0x15, 0x16, 0x18, 0x19, // 65ec
+		     0x1a, 0x19, 0x1d, 0x1e, 0x1c, // 65f0
+		     0x1d, 0x20, 0x21 },
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_SWTG018AS_A_V_2_0_H_
+#define _MACHINE_SWTG018AS_A_V_2_0_H_
+
+#define MACHINE_MODEL "SWTG018AS-A V2.0"
+
+#endif
@@ -0,0 +1,43 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 1,
+    .log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+    .phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO38,
+    .sfp_port[0].pin_los = GPIO_NA,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+    .high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+    .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	/* Ports 1-5 RJ45 use set 0, port 9 SFP uses set 1 
+	 * Ports 1-5: Green: 2.5GBit, Amber: 10/100/1000MBit
+	 * SFP-port: Blue: 10GBit, Green: 100MBit-2.5GBit
+	 */
+    .led_sets = {
+                    {
+                            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+                            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+                            LEDS_DUPLEX,
+                            LEDS_2G5 | LEDS_LINK | LEDS_ACT
+                    },
+                    {
+                            LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
+                            LEDS_10G | LEDS_LINK | LEDS_ACT,
+                            LEDS_2G5 | LEDS_LINK,
+                            LEDS_COL | LEDS_DUPLEX
+                    },
+     },
+    .led_mux_custom = 1,
+    .led_mux = {
+                            0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+            },
+    };
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_SWTG024AS_A_2_0_1_5C_1SFP_H_
+#define _MACHINE_SWTG024AS_A_2_0_1_5C_1SFP_H_
+
+#define MACHINE_MODEL "SWTG024AS-A-V2.0.1-5C-1SFP"
+
+#endif
@@ -0,0 +1,43 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+    .machine_name = MACHINE_MODEL,
+    .isRTL8373 = 0,
+    .min_port = 3,
+    .max_port = 8,
+    .n_sfp = 1,
+    .log_to_phys_port = {0, 0, 0, 5, 1, 2, 3, 4, 6},
+    .phys_to_log_port = {4, 5, 6, 7, 3, 8, 0, 0, 0},
+    .is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+    .sfp_port[0].pin_los = GPIO37,
+    .sfp_port[0].pin_tx_disable = GPIO_NA,
+    .sfp_port[0].sds = 1,
+    .sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+
+    .reset_pin = GPIO_NA,
+    .high_leds = { .mux =  LED_28_SYS | LED_29, .enable = LED_27 | LED_28_SYS | LED_29 },
+    .port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	/* Ports 1-5 RJ45 use set 0, port 9 SFP uses set 1 
+	 * Ports 1-5: Green: 2.5GBit, Amber: 10/100/1000MBit
+	 * SFP-port: Blue: 10GBit, Amber: 100MBit-2.5GBit
+	 */
+    .led_sets = {
+                    {
+                            LEDS_2G5 | LEDS_LINK | LEDS_ACT,
+                            LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT,
+                            LEDS_DUPLEX,
+                            LEDS_2G5 | LEDS_LINK | LEDS_ACT
+                    },
+                    {
+                            LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT,
+                            LEDS_10G | LEDS_LINK | LEDS_ACT,
+                            LEDS_2G5 | LEDS_LINK,
+                            LEDS_COL | LEDS_DUPLEX
+                    },
+     },
+    .led_mux_custom = 1,
+    .led_mux = {
+                            0x00,0x01,0x04,0x05,0x08,0x09,0x0c,0x3f,0x0d,0x10,0x11,0x0e,0x14,0x11,0x12,0x15,0x15,0x16,0x18,0x19,0x1a,0x19,0x1d,0x1e,0x1c,0x1d,0x20,0x21
+            },
+    };
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_SWTG024AS_V2_0_H_
+#define _MACHINE_SWTG024AS_V2_0_H_
+
+#define MACHINE_MODEL "SWTG024AS-V2.0"
+
+#endif
@@ -0,0 +1,33 @@
+#include "machine_defs.h"
+
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 1,
+	.mac_flash_offset = 0x1FC000,
+	.min_port = 0,
+	.max_port = 8,
+	.n_sfp = 1,
+	.log_to_phys_port = {1, 2, 3, 4, 5, 6, 7, 8, 9},
+	.phys_to_log_port = {0, 1, 2, 3, 4, 5, 6, 7, 8},
+	.is_sfp = {0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.sfp_port[0].pin_detect = GPIO30_ACL_BIT3_EN,
+	.sfp_port[0].pin_los = GPIO37,
+	.sfp_port[0].pin_tx_disable = GPIO_NA,
+	.sfp_port[0].sds = 1,
+	.sfp_port[0].i2c = I2CBUS( GPIO39_I2C_SDA4, GPIO40_I2C_SCL3_MDC1 ),
+	.reset_pin = GPIO54_ACL_BIT2_EN,
+	.high_leds = { .mux = LED_27 | LED_28_SYS | LED_29, .enable = LED_28_SYS | LED_29 },
+	.port_led_set = { 0, 0, 0, 0, 0, 0, 0, 0, 1},
+	.led_sets = { { LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green LED (right)
+					0, // unused
+					LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber LED (left)
+					0
+				  }, // unused
+				  { LEDS_10G | LEDS_5G | LEDS_2G5 | LEDS_1G | LEDS_100M | LEDS_LINK | LEDS_ACT, // SFP LED
+					0, // unused
+					0, // unused
+					0
+				  }, // unused		    	},
+				},
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_SWTGW218AS_H_
+#define _MACHINE_SWTGW218AS_H_
+
+#define MACHINE_MODEL "SWTGW218AS 8+1 Managed Switch"
+
+#endif
@@ -0,0 +1,39 @@
+#include "machine_defs.h"
+
+__code const struct machine machine = {
+	.machine_name = MACHINE_MODEL,
+	.isRTL8373 = 0,
+	.min_port = 3,
+	.max_port = 8,
+	.n_sfp = 2,
+	.log_to_phys_port = {0, 0, 0, 6, 1, 2, 3, 4, 5},
+	.phys_to_log_port = {4, 5, 6, 7, 8, 3, 0, 0, 0},
+	.is_sfp = {0, 0, 0, 1, 0, 0, 0, 0, 2},
+	.sfp_port[0].pin_detect = GPIO38,
+	.sfp_port[0].pin_los = GPIO50_I2C_SCL2_UART1_TX,
+	.sfp_port[0].pin_tx_disable = GPIO54_ACL_BIT2_EN,
+	.sfp_port[0].sds = 0,
+	.sfp_port[0].i2c = I2CBUS( GPIO47_I2C_SDA0, GPIO46_I2C_SCL0 ),
+	.sfp_port[1].pin_detect = GPIO36_PWM_OUT,
+	.sfp_port[1].pin_los = GPIO37,
+	.sfp_port[1].pin_tx_disable = GPIO51_I2C_SDA2_UART1_RX,
+	.sfp_port[1].sds = 1,
+	.sfp_port[1].i2c = I2CBUS( GPIO49_I2C_SDA1, GPIO48_I2C_SCL1 ),
+	.reset_pin = GPIO_NA,
+	.port_led_set = { 0, 0, 0, 1, 0, 0, 0, 0, 1},
+	.led_sets = {
+		{
+			0, // Unused
+			LEDS_2G5 | LEDS_LINK | LEDS_ACT, // Green
+			LEDS_1G | LEDS_100M | LEDS_10M | LEDS_LINK | LEDS_ACT, // Amber
+			0 // Unused
+		},
+		{
+			0, // Unused
+			0, // Unused
+			LEDS_10G | LEDS_1G | LEDS_LINK | LEDS_ACT, // Green
+			0, // Unused
+		},
+	},
+
+};
@@ -0,0 +1,6 @@
+#ifndef _MACHINE_TRENDNET_TEG_S562_H_
+#define _MACHINE_TRENDNET_TEG_S562_H_
+
+#define MACHINE_MODEL "Trendnet TEG-S562"
+
+#endif
Author	SHA1	Message	Date
bloq	8224b06f9e	Merge pull request #540 from DrDoof/fix/igmp-link-local igmp: leave groups in 224.0.0.0/24 to flooding	2026-10-14 02:01:59 -05:00
bloq	69151362a0	Merge pull request #566 from DrDoof/fix/igmp-off-lookup igmp: flood all IP multicast again after igmp off	2026-10-14 02:01:55 -05:00
bloq	24e83d5b74	Merge pull request #299 from DrDoof/feat/lacp lacp: implement IEEE 802.3ad (LACP)	2026-10-14 01:35:24 -05:00
logicog	3d81df0cad	Merge pull request #564 from hlyi/machine_refactoring machine: one board definition per file, replacing the #if/#elif chain	2026-10-14 05:51:25 +02:00
d00f	2481810906	lacp: tidy up after review Move port_bit() to rtl837x_common.h as PORT_BIT(), a uint16_t shift, and MAC_ADDR_LEN from rtl837x_lldp.h next to it, and use MAC_ADDR_LEN for every address in the LACP code instead of a literal 6. Define lacp_mux_update() before its first caller and drop the forward declaration, declare variables at the top of their blocks, put the operator at the end of a continued line, drop the field value comments of the LACPDU struct, and leave lacp_port_lag to lacp_init() instead of initialising it in the test environment.	2026-10-14 00:55:11 +02:00
d00f	03311debe6	Merge pull request #586 from mintsoft/lldp-blocking LLDP: prevent the switch from passing LLDPDUs when lldp is enabled	2026-10-13 12:51:18 +02:00
Rob Emery	e4adec9c11	Renaming for consistency and spaces -> tabs	2026-10-13 08:27:53 +01:00
d00f	d525229b42	doc: lacp: shorten, point to stp.md for the trap The trap is described with STP, so the LACP page only says that it is used. The LACP sections leave link_aggregation.md, which now points to lacp.md, and the timing section gives the values in seconds and the 802.3ad requirements without the test history.	2026-10-12 22:05:56 +02:00
d00f	73b23808cf	lacp: keep comments to the frame layout The comments repeated the documentation, described tests or explained the code to its author. What stays describes the LACPDU structures. The timer constants are decimal, in units of the LACP timer.	2026-10-12 22:05:56 +02:00
d00f	4a14f50932	test: build the LACP test on the real headers, drop the port_hash test The LACP test now compiles with the shared harness flags and sdcc_shim.h against the firmware headers, so the copies under test/lacp/shim are gone. test_port_tables already covers the trunk hash seed that test/port_hash checked against its own register copies. lacp_in() declares its locals at the top, which the stricter host build needs.	2026-10-12 22:02:56 +02:00
d00f	1bfe632174	doc: lacp: lag <n> d and a static list leave LACP, new lacp_lag_set() prototype	2026-10-12 21:59:08 +02:00
Rob Emery	265a80bb25	Trapping the 01:80:c2:00:00:0e prevents the switch from passing between ports	2026-10-12 20:32:29 +01:00
d00f	64efd3fb9f	lacp: drop the unused long timeout and an unrelated pvid hunk	2026-10-12 21:21:07 +02:00
d00f	2e6425f5e6	lacp: keep lacp_in() and lacp_lag_set() out of the data segment The port and group of lacp_in(), the member mask passed to lacp_lag_set() and the compiler temporaries both functions spilled took six bytes of DSEG, and with them six bytes of stack. The locals and the mask live in xdata now, the partner fields go through the scratch word, and lacp_lag_set() records the new group of a port before it releases the old one. One byte is left: the group number passed in.	2026-10-12 21:21:07 +02:00
bloq	1856aeba28	Merge pull request #579 from nuclearbananaslug/patch-1 mirror: parse the monitor port argument	2026-10-12 12:01:27 -05:00
d00f	4e4a2ea4db	lacp: review follow-ups lacp_in() always leaves uip_len at 0, so the tcpip_output() after it never ran. The LAG page names the active members by front-panel port instead of a logical mask. The partner key is not part of selection; say so under Known limits.	2026-10-12 16:27:22 +02:00
d00f	4ccbf51976	lacp: ignore a LACPDU that carries our own system id Two ports of one group cabled to each other heard themselves and the group aggregated with itself. Sandbox T24.	2026-10-12 16:27:22 +02:00
d00f	0df48fbb1c	httpd: leave the L2 listing as it is on main Listing by next-address also returned the reserved-multicast entries STP writes, shown as port 1 with a delete button, while l2_delete() still looks up by next-unicast and so removed the unicast entry after that index instead. The change was there to show the LACP steering entries; delivery by trap writes none, so it goes.	2026-10-12 16:27:21 +02:00
d00f	25040070e5	lacp: "lag <n> d" and a static member list take the group out of LACP Both paths wrote the trunk registers directly and left the protocol running on the group, so "lag show" said disabled while the partner kept both links in one aggregate, and re-sending the LACP line did not repair it because the same-ports shortcut returns early. Each path now releases the group from LACP first; for a group that never ran LACP that is a no-op.	2026-10-12 16:27:20 +02:00
d00f	edf6351d85	lacp: arm the partner timeout from our own LACP_Timeout The receive machine armed current_while from the partner's TIMEOUT bit, so against a partner on the slow rate a port whose LACPDUs stopped with the link still up stayed in the trunk for the long timeout, two minutes. 802.3ad 43.4.12 starts the timer from the actor's own LACP_Timeout, and we always advertise the short one: the partner sends every second and is let go after the short timeout. Sandbox T23 plays a slow-rate partner that goes quiet and fails on the code before this.	2026-10-12 16:27:19 +02:00
DrDoof	c3b4cc893b	lacp: implement IEEE 802.3ad link aggregation Dynamic link aggregation on top of the static LAGG, for RTL8372/8373: receive, selection and mux state machines (coupled mux, one aggregator per group), with "lacp show" to look inside. Each of the four trunk groups runs its own aggregator on the candidate ports assigned with "lag <n> lacp <ports>"; the engine starts with the first such group and stops with the last. LACPDUs reach the CPU through the reserved-multicast trap, so delivery needs no L2 entry and nothing written per VLAN or per PVID. The trap acts on the address before the VLAN lookup and before the ingress filters, so a LACPDU also arrives on a port that admits tagged frames only and on a port STP holds in blocking, neither of which a forwarded one reaches. A trapped frame carries no VLAN tag, so lacp_in() takes the offset of the PDU body from TRAP_RX_BODY(). The action is set with trap_rma_set(), which leaves the flags sharing that register alone, and "lacp off" puts the slow-protocols drop default back. doc/lacp.md and doc/link_aggregation.md record what was measured, including why the trap looked like a dead end at first. The web UI gets a Static/LACP mode per group on the LAG page with live status, and the startup-config validator knows the per-group syntax. A host-side sandbox for the state machines runs in the test harness together with the LAG hash check. It drives both forms of an incoming LACPDU, so the body offset of a trapped one is covered as well. The L2 table page iterated with the "next unicast" read method, so static multicast entries such as an IGMP group were invisible. It now iterates with "next address", skips L3 entries (their layout carries IP addresses where a MAC is expected), and reports the lowest member of a multicast entry's port mask, so such an entry shows up as a static entry on that port. A port taken out of LACP forgets its partner, so "lacp show" after "lacp off" no longer reports one. Applying the same candidate set to a group again, as the LAG page does on every Apply, leaves the trunk alone instead of tearing it down for a second or two. lacp_in() checks the frame length and ethertype before reading a LACPDU, so a runt or a foreign frame on the slow-protocols address cannot leave stale buffer bytes as a partner. The sandbox covers these three in T20-T22. On the LAG page, LACP mode with no ports checked sends "lag N lacp off", and the startup-config validator wants at least one port after "lacp".	2026-10-12 15:09:57 +02:00
d00f	b83b67d234	Merge pull request #514 from DrDoof/feat/trap trap: deliver reserved multicast to the CPU by trap, STP first	2026-10-12 15:07:11 +02:00
Antony	efd61be64e	mirror: parse the monitor port argument	2026-10-12 13:04:49 +00:00
logicog	da7909f422	Merge pull request #563 from dobodu/main Add port isolation and related messages in French	2026-10-12 06:32:45 +02:00
DrDoof	14b2ce1c49	trap: deliver reserved multicast to the CPU by trap, STP first A reserved-multicast trap goes to the port named in EXT_CPU_CTRL, which names no port out of reset, so trapped frames were dropped at ingress. trap_init() points it at the CPU port once at startup, and trap_rma_set() changes only the action field of an RMA register. A trapped frame arrives without the VLAN tag a forwarded one gets, so TRAP_RX_BODY() gives the offset of the payload for both forms. STP now traps its address while it runs instead of steering it with a static L2 entry per VLAN, so turning it on no longer walks the VLAN table and a pvid change no longer needs stp off and on. With STP off the flooding entries are restored as before. A trapped BPDU passes the tagged-only ingress filter that drops a forwarded one, so the stp_setup() warning about such ports goes.	2026-10-12 01:16:28 +02:00
d00f	84d9408151	Merge pull request #447 from DrDoof/feat/ntp ntp: keep the time from an NTP server	2026-10-11 23:20:06 +02:00
dobodu	05c0571154	Add warning for unsupported firmware images Add french translation for fw_other	2026-10-11 21:46:50 +02:00
dobodu	8790f0dca4	Merge branch 'logicog:main' into main	2026-10-11 21:38:57 +02:00
René van Dorst	98af999304	Merge pull request #547 from brunoz78/fw-machine-check web: warn when a firmware image was built for another machine	2026-10-11 14:16:30 +00:00
René van Dorst	0a996fa6d0	Merge pull request #548 from brunoz78/tab-hostname web: name the browser tab after the switch hostname	2026-10-11 13:50:09 +00:00
René van Dorst	441e575661	Merge pull request #569 from DrDoof/fix/flash-security-dummy flash: set the dummy cycles required by the security register read	2026-10-11 11:20:32 +00:00
d00f	a27118a428	flash: add the dummy cycles required by the security register read Opcode 0x48 outputs 8 dummy clocks between the address and the first data byte. flash_configure_sio() sets DUMMYCYCLES to 0 and flash_read_security() never raises it, so the controller captures the dummy slot as the first of its four data bytes while the address still advances by four. The printed output therefore shows 0xff in place of every fourth byte and skips one content byte per transfer. flash_read_uid() already sets DUMMYCYCLES for opcode 0x4b, which needs the same allowance.	2026-10-11 03:19:00 +02:00
hlyi	b3ac10cae7	Update HG0402XG_V1_1.c Change 0xFF to GPIO_NA	2026-10-10 06:31:16 -07:00
DrDoof	24c0a95734	igmp: stop looking up IPv4 multicast in the L2 table on igmp off igmp_setup(), which `igmp off` also calls, enabled the lookup of IPv4 multicast in the L2 table. Groups learned while IGMP was on therefore kept going only to the ports that had reported them, and with reports no longer trapped nothing updated those entries until a reboot. The lookup is now enabled in igmp_enable() and disabled in igmp_setup(), so with IGMP off all IP multicast is flooded again.	2026-10-10 02:43:04 +02:00
DrDoof	f88f655f5a	igmp: leave groups in 224.0.0.0/24 to flooding The switch keeps flooding 224.0.0.0/24 with IGMP on, but a report for a group in that block still made an entry for it, and the entry limited the group to the ports that reported it. A host announcing mDNS on 224.0.0.251 thereby cut mDNS off from every other port. Such reports are now ignored, as RFC 4541 asks.	2026-10-09 18:02:41 +02:00
HL Yi	a6b0918885	refactoring machine.c, two files per device	2026-10-08 18:43:05 -05:00
dobodu	1d6fe690a4	Add port isolation and related messages in French	2026-10-08 22:49:58 +02:00
Brunoz78andClaude Opus 5.5	4f009539b0	web: name the browser tab after the switch hostname With several switches open, every tab was called "Switch". The dashboard tab now shows the hostname, and the login page shows the hostname seen at the last login on that address (kept in localStorage, which is per switch), or the address itself before the first login. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-04 18:33:23 +02:00
Brunoz78andClaude Opus 5.5	bb90e0c9ba	web: warn when a firmware image was built for another machine The firmware page accepted any valid image, also one built for a different board whose SFP, LED and button pins differ. Every image carries its machine name as a NUL-terminated string, the same one the switch reports as hw_ver; when the selected image lacks it, the page now warns below the check result and in the confirmation dialog. The upload stays possible on purpose. Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>	2026-10-04 10:41:47 +02:00
DrDoof	3cd6d60e0b	ntp: keep the time from an NTP server The switch has no battery backed clock, only a seconds counter that starts at zero on every boot. An SNTP client keeps UTC as the time of the last answer plus the seconds counted since: "ntp server <name\|ip>", "ntp interval <minutes>", "ntp timezone <+hh:mm>", "ntp dst off\|eu\|us", "ntp on\|off", "ntp" and "time". A server given by name goes through the DNS resolver, an answer from an unsynchronised server is ignored, and a failed attempt is repeated after 30 seconds. The local time adds the time zone offset and, while the European or United States rule says so, one hour. The date is split with a shift and subtract division and a walk over the years, so no 32-bit division from the library ends up in the common area. The System page gets the NTP settings and shows the local time.	2026-09-29 22:40:59 +02:00