Commit Graph
18 Commits
Author SHA1 Message Date
Taiga Ogawa f6cb1152f9 Add support for FOXNEO FNS-1200P (RTL8372, 4x2.5G PoE+ + 2x SFP+)
- machine.c/h: add MACHINE_FNS1200P with verified GPIO assignments for
  both SFP ports, LED SET0 (amber 2.5G / green 1G-100M-10M) and SET1
  (SFP all-speeds), led_mux from original firmware register dump, and
  machine_custom_init() enabling LED_GLB_IO_EN bit 6
- doc/devices/FNS-1200P.md: device overview, port layout, serial
  console (S1 three through-holes = UART0 115200 8N1 3.3V),
  LED and SFP GPIO tables
- doc/devices/photos/FNS-1200P/: chassis front panel and PCB top photos
- doc/supported_devices.md: add FNS-1200P to the list

GPIO assignments and LED register values were cross-checked between
live GPIO observation (RTLPlayground gpio command) and an original
firmware register dump.
2026-05-16 17:53:32 +09:00
Mark Captur f47fec7098 Add pics for Hi-Source HI-k0801WS 2026-05-08 06:02:21 +02:00
logicog d6dbf4e4dd Add photos of ZX310S-4T2XH 2026-04-24 10:53:05 +02:00
Brenda Streiff 97ae6bf1d3 Document the '2M-PCB23-V2.2' PCB
Sold as "keepLINK KP-9000-9XHML-X". This is different from the other, "V3.1"
version of the "keepLINK KP-9000-9XHML-X".
2026-04-04 11:40:03 -05:00
bennydiamond 7ffd0c25c2 Support for PCB-SWTG115AS-V2.0
Marketed as Lianguo ZX-SWTGW215AS
2026-03-27 19:34:39 -04:00
Jan Hoffmann 03422463e4 Rename K0501W to include PCB version
It seems very likely that other versions are not compatible, so make it
clear by including it in the machine type and name. Also update the
documentation.
2026-03-26 19:59:06 +01:00
Jan Hoffmann f331a6129a Add support for K0501W boards
This board appears for example in the Davuaz Da-K6501W switch, and is
designed similarly to Hi-K0402WS.

However, it only has one SFP port and another 2.5G copper port using
RTL8221B 2.5G PHY instead. Also, some components on the board, like
additional LEDs, mode switch, and second flash chip are not populated.

Like earlier revisions of the K0402W(S) board, there is no UART, so
debugging is limited.

As this is an unmanaged switch, installation needs a flash programmer.
2026-03-25 19:31:14 +01:00
logicog dc16b25d62 Add support for the SWTG018AS-A V2.0 8+1 unmanged switch
The SWTG018AS-A V2.0 is an 8x2.5GBit/s port + 1 SFP+ port unmanged device
It is sold in an unbranded casing e.g. by Ampcom.
Hardware:
SoC: RTL8373N
Additional PHY: RTL8224
Flash: Puya P25D40SH (4MBit, slimmer, not standard SOP-8 package!)
LEDs: 1 Green + 1 Orange per Ethernet port (green designates 2.5GBit)
      1 Green LED for the SFP+ port

The photos already show a modified PCB: Unpopulated resistors R52 and R53
have been bridged in order to enable the serial console. The smaller flash
memory chip at U2 has been replaced with a Windbond 128MBit standard-sized
SOIC-8 chip in order to easily use SOIC clamps to flash the device. Also
the serial header has been populated.
2026-02-27 20:11:53 +01:00
logicog 70127018da Add device photos of KeepLink KP-9000-6XHML-X2 2026-02-25 18:07:54 +01:00
feelfree69 9f7e10fe7c Merge branch 'main' into swtgw218as 2026-02-14 19:22:17 +01:00
chriz 5e9f3324d5 Add photos keeplink KP-9000-6XH-X2 unmanaged. 2026-02-13 19:01:53 +01:00
feelfree69 f8c1ab4198 Add .md and photos 2026-02-12 21:56:37 +01:00
logicog eafe2e96e8 Merge pull request #113 from diijkstra/trendnet_limited
Partial TRENDNET TEG-S562 support
2026-02-07 16:58:32 +01:00
diijkstra 5391d3ec32 Partial TRENDNET TEG-S562 support
Mostly working, lacking LED initialization changes.
LEDs will be added later once #107 is merged.

Closes #76.
2026-02-04 18:25:07 +01:00
chriz a528436572 Add HiSource HI-K0402WS pictures 2026-01-21 14:43:04 +01:00
René van Dorst 17fdbf39f0 Add docs: 2M-PCB23-V3.1-managed 2025-10-11 00:11:38 +02:00
René van Dorst 7f9147918a docs: SWTG024AS: remove old spreadsheet, rotate images 180° so silkscreen text is correct. 2025-09-07 23:57:04 +02:00
René van Dorst 0d63b08f89 Docs: Add SWTG024AS-v2.0-unmanaged version
Pinout Spreedsheet, photos and wiki about my findings.

GPIO number may be has endian problem.
2025-09-06 10:23:09 +02:00