The hardware bitmask format encodes both "untagged members" and
"non-members" in the upper 10 bits (per doc/vlan.md). The existing
fetchVLAN() correctly masks this with the membership bitmask before
display, but loadVlanTable() did not, causing non-member ports to
appear in the Untagged Ports column.
Tested on KeepLiNK KP-9000-6XH-X.
Below the configuration form, a new table lists all configured VLANs
with their port memberships: Member, Tagged, Untagged, and PVID
columns. Port ranges are formatted compactly (e.g. "1-2,5").
Port-to-bit mapping uses the existing physToLogPort[] array populated
by /status.json, so the table is consistent with the icon view in
fetchVLAN() and works on any supported machine.
Each row has a delete button that sends "vlan N d" via /cmd, with
a confirmation dialog. VLAN 1 cannot be deleted (no button shown).
Table and dropdown both refresh automatically after Update/Create
and after delete via a new refreshVlanViews() helper.
The N+1 request pattern (1x /vlanlist + Nx /vlan.json) keeps the
backend simple and avoids buffer overflow risks for systems with
many VLANs. For typical configurations (<50 VLANs), page load
remains under one second.
A new <select> element above the VLAN ID input lets users pick an
existing VLAN by name instead of typing the ID. Options are loaded
from /vlanlist on page load and re-loaded after successful
Update/Create operations.
Selection triggers the existing fetchVLAN() flow.
Falls back gracefully if /vlanlist returns an empty list or fails:
the dropdown is hidden and the existing ID input remains functional.
I noticed that entering some vlan config, clicking "Update/Create", then
clicking "Get Configuration" resulted in Tagged/Untagged/PVID displaying
completely wrong data. It looks like the parisng in fetchVLAN() in
vlan.js was just completely disconnected from the layout of the
registers read by vlan_get() in rtl837x_port.c. Who knows how that
happened.
1. Fix fetchVLAN() member/untag parsing: the old code read bits [9:0]
as untagged and bits [10:19] as tagged, but the VLAN table register
layout is members in [9:0] and untag in [19:10]. Now correctly
derives tagged (member && !untag) and untagged (member && untag).
2. Add PVID to vlan.json response: PVID is stored per-port in separate
PVID registers (RTL837x_PVID_BASE_REG), not in the VLAN table entry.
The old code nonsensically tried to read it from bits [20:29] of the
VLAN table. Add port_pvid_get() and build a pvid bitmask in
send_vlan() so the JS can parse it correctly.
3. Remove auto-PVID logic from setC(): setC() is called by fetchVLAN()
while it's loading existing config, and so this logic mangled the
display of the existing config. Also, it doesn't make sense to
auto-set the PVID for tagged members (PVID relates to untagged
ingress.)
Your Name
Erdnusschokolade
logicog
logicog
Mark H. Spatz
chriz