On a QSFPTEK QT-SFP+-T (RTL8261C) 10GBase-T module, the diag type field
(92) comes back as 0x00, but there's actually some statistics available
like temperature. Other metrics may be hard-coded values.
Add a basic struct that allows matching on vendor and/or model, using a
bitfield to allow multiple quirks for a given SFP module. Only
SFP_QUIRK_DDM is implemented.
For modules matching SFP_QUIRK_DDM, attempt an I2C read of the MSB of
module voltage during probe if DDM is "unsupported" - if it's not 0xff,
override the reported options so we can pull the diagnostic data.
To allow simpler comparisons, convert the ASCII fields (vendor,
model, serial) from space-padded to standard NULL-terminated strings.
strcmp() is moved from httpd.c to rtlplayground.c alongside other string
functions and shared between them.
The __reentrant keyword is used for the new functions to avoid using up
additional OSEG space. This allocates the variables on the stack, which
is OK for this particular code path.
The JSON assembly in send_status() is slightly modified to treat the
sfp_module_* data as standard NULL-terminated strings, and a repeated
subtraction was moved into a uint8_t to declutter the code.
1. While loop scanning VLAN name terminated only on ' ', not '\0'.
When the name is the last token in cmd_buffer, the loop reads past
the buffer into adjacent XRAM.
2. Entering 'vlan' without arguments causes parse_vlan() to read
cmd_words_b[1] which points to undefined memory, causing atoi_short()
to interpret residual bytes from previous commands as a VLAN ID.
Bug found and fix proposed by logicog during review of PR #232.
Co-Authored-By: logicog <logicog@users.noreply.github.com>
Previously, renaming a VLAN or deleting and recreating it with a
different name did not update the displayed name. The vlan_names[]
array is an append-only buffer where vlan_name() returns the first
matching entry, so stale entries kept winning.
This commit adds vlan_name_remove(), which locates an entry by
VLAN ID and removes it via array compaction. The function is called
in two places:
- parse_vlan() in cmd_parser.c, before appending a new name entry,
to remove any pre-existing entry for the same VLAN ID
- vlan_delete() in rtl837x_port.c, to clean up the name when a
VLAN is removed
The implementation reuses the existing vlan_name() lookup, scans for
the trailing space of the matched entry, then shifts remaining bytes
left. Locals are declared as static __xdata to avoid the SDCC
overlay segment limit on banked functions.
Tested on KeepLiNK KP-9000-6XH-X:
- vlan 99 AAA p1u; vlan 99 BBB -> name updated to BBB
- vlan 99 d; vlan 99 CCC p1u -> name correctly CCC, not stale AAA
Note: This fix addresses the runtime XMEM state. Persistence of
renamed VLAN names across reboot requires the user to download and
re-upload /config, as is the existing pattern for all configuration
changes in this firmware.
Remove the return argument because `err_status` is also reflecting the result.
Fix the error message when too many arguments are found.
refactor `execute_config()`, error out when err_status is not OK.
Because no memory type is specified to the reference location, sdcc is
using a helper function to access the location. But sdcc is using a
register to tell the helper function which memory-type is used.
This registers must also be preseved until all access to that location is done.
Because `cmd` is guaranteed by the compiler to be NULL-terminated, we can make use of that to ensure the loop always ends.
So we don't need to know when the next words starts.
Matt Merhar
René van Dorst
logicog
logicog
Erdnusschokoladeandlogicog
UAb5eSMn
feelfree69
feelfree69