Only frames to 01:00:5e:00:00:16 reached the IGMP handler, so v1/v2
reports, which go to the group address, were never seen. The handler
also took the group from the first v3 group record for every type.
Pass all IPv4 multicast to the handler, which takes the IGMP header
from the IP header length, the group from the IGMP header for v1/v2
reports and v2 leaves and from the first group record for v3, and
returns 0 for anything that is not IGMP so it goes on to the IP stack.
The message and record types have names now.
This adds an implementation for trapping IGMP packets to the CPU
which will identify IGMPv1/2/3 packets, but handle only v3.
The implementation then inserts/updates/deletes L3 MC entries
in the L3 lookup table. The entries consist of an Ipv4
Destination IP (the IPv4 MC address), a Source IP (0.0.0.0) and
a Portmask. Note that this implementation is not VLAN aware,
as there is no hardware support in the device.
An alternative strategy is to control switching of the L2-MC packets
in which the IPv4-MC packets are transported (dst-MaC is
01:00:5e:xx:yy:zz, with xx:yy:zz corresponding to bits in the Ipv4-MC
address). This will allow to use VLAN-aware packet switching. While
code support is there for table insert/update/deletes, some further
L2 configuration is missing.
There is no support for IPv6 MC, yet.
DrDoof
logicog