A commit hash can be looked up directly, a checksum cannot. Print the last commit that touched sdcc/, with -dirty for local changes, and fall back to the checksum when git is not available. The toolchain directory keeps the checksum.
The installer Makefile called whatever sdcc was on the PATH, so an
installer built by hand came out of the system compiler, without the
fixes in sdcc/. Use the same toolchain/sdcc-<cksum> as the main Makefile,
built on demand by sdcc/build.sh if a bare installer build gets there
first, and keep CC= on the command line as the way to pick another
compiler. The README example shows the new command lines.
The boot banner and the version command print the SDCC release and
revision from the compiler's own macros, and the name of the in-tree
toolchain the Makefile built, which is the checksum of sdcc/ and so
changes with every patch in it. A build with CC given on the command
line says "system" instead, since that compiler need not carry the
patches. A plain release and the same release with the patches report
the same revision, so the toolchain line is what tells them apart.
Costs 66 bytes of BANK2.
Review feedback on #560 (DrDoof):
- A login that came with a cookie that is still valid took a second
slot. The first one looked fresh, so the next login could push out
someone who is using the switch. The slot of the cookie now gets the
new id.
- Changing the password leaves no old login valid: session_init() from
parse_passwd(). With one session the next login pushed a leftover one
out, with several it would stay valid until the next restart.
- The 32-bit comparison of the last use times moves into a leaf function,
so the compiler does not give it a 4-byte scratch in internal RAM.
Co-Authored-By: Claude Sonnet 5.5 <noreply@anthropic.com>
The web server's bank had no room left for the four sessions once the
original firmware's more robust header handling came in. Picking a slot,
checking a cookie and starting a session move to sessions.c in bank 3;
httpd.c only calls session_init(), session_check() and session_new().
The random id is written straight into the reply, which drops
gen_random_hex_chars() from bank 1.
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Logging in from a second browser ended the first one's session at its next
request: two browsers open on the switch logged each other out every few
seconds. Up to four sessions now, each with its own cookie and expiry; a
fifth login replaces the least recently used. The expiry check is a leaf
function so its 32-bit scratch stays out of internal RAM (stack still
159 bytes with HEALTH).
Co-Authored-By: Claude Opus 5.5 <noreply@anthropic.com>
Claude-Session: https://claude.ai/code/session_01Tx2W7xVecMoKbBCkD2i8PG
(cherry picked from commit 03330f4077ef8872d861d951c8e44ece3c573935)
it'll accept just the definition.
Also throughout the regex we have over-specified the number of digits
sometimes ports are 4 digits long, sometimes they are 2. This seems
unnecessary, 1 or more is sufficient
the user clicks apply on the specific vlan. In order for this to
work when the user is simultaneously changing the vlan that their
machine is connected through and the mgmt vlan id, we need to be
able to send a batch of commands through to the switch atomically
so the switch can process all of them and the momentary disconnection
of the machine doesn't matter
When adding a new VLAN, we should load it after addition
Prevent deleting the mgmt vlan
Adding a button to promote a vlan to be the management VLAN
We can't create a vlan called d or mgmt as that clashes with the
commands to delete and promote a vlan
Making the Management VLAN more obvious and adding a "confused"
disabled button to where delete and promote are
Switching to the i image and making it so you can click the entire
row apart from the cell where the buttons are (to prevent accidents)
Cleaning up the last bits of ingress filtering I can see
rwalli@gmx.at
feelfree69
Luca S.
dobodu
d00f
Rob Emery
HL Yi
Brunoz78andClaude Sonnet 5.5