Move port_bit() to rtl837x_common.h as PORT_BIT(), a uint16_t shift,
and MAC_ADDR_LEN from rtl837x_lldp.h next to it, and use MAC_ADDR_LEN
for every address in the LACP code instead of a literal 6. Define
lacp_mux_update() before its first caller and drop the forward
declaration, declare variables at the top of their blocks, put the
operator at the end of a continued line, drop the field value comments
of the LACPDU struct, and leave lacp_port_lag to lacp_init() instead of
initialising it in the test environment.
timing with ticks
Fixing up the log_to_phys_port assignment
2000 is about every 10 seconds, so scaling up to once every 30ish
Removing the attempt to block lldp frames,
This does not work however the hard work has been done for us in
the #514 so we can borrow that work later on
to each port once every 30 seconds.
* Additionally fixes the on-ward passing of LLDP frames through
the switch
The ports on the case are marked 1-8 so this should reflect that
rather than being 0-based
We can send the hostname as well, this can be dynamically allocated
Let's send the model as the system description as well
d00f
Rob Emery