login.html asks for i18n.js, but the file is not on the short list a
client may have before it authenticates, so the request is answered with
a redirect back to the login page and the strings stay as the English
that is baked into the markup.
The file carries only the interface text, the same text the page already
ships untranslated, so serving it before login gives nothing away.
The enabled flag is a flag, so say bool. The header length no longer needs
to live in xdata: it was put there when a local would not link, and there
is room for it here.
The overview names the row after the JSON key, so the syslog row said
"syslog_server_ip" while carrying only an address. It now says
"syslog_server" and carries the port with it.
A POST /cmd whose body arrives in a separate TCP segment from the headers
executed nothing: handle_post() read the body from the segment that
carried the request line, found it empty, and answered 200 OK. Python's
urllib and requests both write headers and body separately, so every
scripted command from those clients became a silent no-op. POST /login had
the same hole. The multipart endpoints were fixed earlier; this covers the
plain ones.
When the first segment holds fewer body bytes than Content-Length
announces, the bytes accumulate in config_buf (idle outside multipart
uploads) and the connection waits in TSTATE_POSTBODY; once the announced
length is in, the endpoint runs against the buffer. The /cmd and /login
executions move into run_cmd_body() and run_login_body() so both paths
share them; the 200 OK builder they duplicated becomes send_ok(), and
run_login_body() checks the pwd= prefix instead of skipping four bytes
blindly.
The announced length is the contract on both paths. A body that arrives
with the headers is terminated at Content-Length before it runs, so
pipelined bytes after it are not executed as commands the way the old
code did. A request without a usable Content-Length answers 411: without
one there is no way to know when the body has arrived, and the old 200
OK for an empty body is the bug this fixes. Bodies announced at or above
the buffer size answer 400 before anything is buffered.
The wait state has a deadline. uIP is built with a single connection,
and an ESTABLISHED connection with nothing in flight never times out on
its own, so headers followed by silence (a script interrupted, a link
dropped mid-request, or someone holding the socket on purpose) would
otherwise keep the slot until reboot; POST /login reaches the wait
before authentication. The poll handler aborts the connection when the
body has made no progress for five seconds, measured on the 200 Hz
system tick rather than on poll count, which runs faster under interrupt
load.
Record the announced body length alongside Content-Type and the session
cookie. The value goes through parse_short(), so an announcement that does
not fit sixteen bits saturates at 0xffff rather than wrapping to something
the size checks would accept, and a missing or unparseable header reads as 0.
Nothing consumes it yet; the plain POST endpoints take it up next.
The scan stepped over the NUL that ends the received data before breaking,
so on a request whose headers were cut short it returned a pointer one past
the data. handle_post() then tested that byte for the end of the header,
reading whatever an earlier packet had left there instead of the NUL the
appcall wrote, and could go on to run an endpoint against the stale bytes.
Break before advancing so the returned pointer sits on the NUL and the
caller's check sees it.
The digit loop accumulated into a uint16_t without a bound, so a query
such as /vlan.json?vid=65540 read as VLAN 4 and every consumer saw a small,
valid-looking number for an out-of-range one. Clamp the result at 0xffff
once another digit would overflow (6552 * 10 + 9 is the last value that
fits). The consumers already reject or mask 0xffff: vlan_get() refuses
anything from 4095 up, send_l2() masks the index to the table size, and
l2_delete() masks the high byte.
scan_header() found Content-Type and Cookie with is_word(), which compares
bytes exactly and requires a separator after the pattern. Field names are
case-insensitive (RFC 7230 section 3.2), and the whitespace after the colon
is optional, so "content-type: multipart/..." and "Content-Type:multipart/..."
were both treated as absent. The value pointers were then fixed offsets that
assumed exactly one space.
Add header_value(), which matches a lower-case name anchored at the line
start, folds the request bytes to lower case as it compares, and returns
the start of the value past any blanks, so a call site no longer adds the
name length by hand. Cookie scanning reuses the returned pointer, and the
end-of-header test becomes the strstart() the file already has.
The tail of handle_post() interleaved the config and firmware upload
paths behind one config_upload conditional. Give each path its own
function, handle_config_fragment() and handle_firmware_fragment(), and
reduce handle_post() to routing.
Both handlers keep their own copy of the buffer-and-bounds-check
prologue: with SDCC a shared helper costs 2 bytes of direct RAM for
the fragment pointer (a spill slot when the parameter lives in xdata,
a DSEG home when it does not), and direct RAM is fully allocated. The
memory layout is unchanged from the pre-split code.
cfg_pos, cfg_hdr, cfg_body, cfg_end, cfg_last and cfg_bl are used only
by config_take(), so move them out of file scope and into the function.
The five cursors stay static: SDCC register-caches automatic xdata
locals and spills them through DSEG slots, which costs 6 bytes of direct
RAM this build has no room for; static keeps the access pattern of the
old globals and the memory layout is unchanged. cfg_bl produces no spill
slot at the current register pressure, so it is a plain local. The
mechanism is recorded in issue #386.
handle_post() reused cfg_pos and cfg_end as scratch for unrelated
values; those uses get their own named locals, frag_len and
payload_start.
The pointer is masked when it advances over the command text, then
incremented once more for the newline without masking, so it can come to
rest one past the end of the ring.
Both readers walk from the pointer with their own index masked every
step, so an index that sits outside the ring is never reached and the
walk does not end. `history` on the console spins there, and so does
`/cmd_log`, which the web page fetches whenever settings are saved: it
fills the transmit buffer and keeps going past it.
This PCB is used in RY-8GT-1SX. The UART has swapped Rx and 3.3V VCC as
documented in `doc/devices/FG-8GT-1SX.md` so I imagine there would be
a revision later, after the current '2622' batch, like the RY-4GT-2SX /
FG-4GT-2SX_V2.0 pair from the same vendor.
The member mask is filled with a loop that stops one short, so the
highest front panel port never gets its bit and stays isolated from the
port that was just opened up. Every other loop over the port range in
the tree treats machine.max_port as the last port rather than the one
past it.
An empty slot used to read back 0xa0 per byte and the filter dropped it,
so the field came out empty. Block reads report the failure instead and
leave the buffer alone, and these two callers ignored that and printed
what the last successful read had left there.
Say nothing when there is nothing to read, which is what the other eight
callers of sfp_read_block() already do.
The port argument went through its own digit test and machine table
lookup; cmd_parse_port_separator() does both and also checks the port
exists on this board, which the open-coded test did not.
A port priority was masked to its top nibble, so "prio 17" quietly became
16. The bridge priority next to it refuses what it cannot represent, and
now the port priority does too.
Both only ever served stp_fdb_update(), so they belong there. Internal RAM
has room for them on this branch and on the one that carries the
aggregation module too.
stp_enabled is a flag, so say bool. cmpBytes() returns a comparison
result, so say int8_t. The three busy waits this branch adds read the
status straight out of the SFR instead of copying four bytes to xdata
first.
A port held out of forwarding because a loop was seen on it stops hearing
the frames that justified the hold, so its BPDU age climbs. The auto edge
branch lives inside the same countdown as the hold, reads that age, and
promotes the port back to forwarding after three seconds. The loop opens,
a BPDU comes back, the block is applied again, and the two take turns.
Measured on a looped pair present when the tree came up: twenty cycles in
one window and fifteen in the next, each block followed by a promotion,
still going when the capture ended.
The countdown alone cannot tell a loop hold from an ordinary listen, so
record the hold and leave the port alone while it stands.
make clean left tools/output in place, so the host tools were never
rebuilt after a clean. SUBDIRSCLEAN, which builds the per-directory
clean target names for exactly that purpose, was defined but nothing
consumed it. Give clean and distclean those targets as prerequisites
and add the rule that runs the subdirectory's own clean, which
tools/Makefile already provides.
tcpip_output() decides whether to splice in the 802.1Q tag, and that
decision also moves the frame: the header is shifted forward over its
padding, so a tagged frame starts at uip_buf with the q_frame layout,
while an untagged one keeps the padding and the nonq_frame layout.
nic_tx_packet() took that decision a second time, from management_vlan
alone. That agreed while the sender suppressed the management VLAN around
the transmission, but not since the tag is skipped per frame for a
CPU-tagged one: the descriptor then still sits behind the padding while
the transfer is set up for the shifted layout. The frame goes out four
bytes early and its length is read from the offset where tx_seq and
chksum_flags live, so a sixty byte BPDU is sent as around 1800 bytes of
whatever follows it. Looped back it is no longer a BPDU, the port hears
nothing, auto edge promotes it and the loop stays open.
Record the decision where it is taken and let the transfer follow it.
A variable rather than an argument because internal RAM is full once the
aggregation module shares the image: the overlay area ends at 0x7f, and
an argument or any temporary for the condition no longer fits.
The hand rolled loop was here because atoi_short() reported "no digits"
but not overflow, so 65540 would have wrapped to 4 and opened a
connection to a port nobody asked for. #326 gave it the same bound this
loop was carrying, so the reason is gone.
Zero still covers all three ways to be wrong, except that "no digits"
and overflow now come back as a zero return and port zero as a zero
value, so both are tested.
Three xdata scratch variables go with the loop.
The loop tested the digit range and the overflow bound with separate ifs,
on the strength of a comment saying the joined form makes sdcc park a
boolean in the bit area, and that an image carrying LACP and STP as well
is one bit short of needing a third byte of it. Measured on this branch
that is not what happens: the joined form links, the bit segment is
unchanged at fourteen bits overall and nine in cmd_parser, and BANK2
comes out ten bytes smaller.
The claim was about an image this branch does not build, and no branch
currently carries LACP, STP and this parser at once, so there is nothing
left to check it against. A justification nobody can verify, for a shape
nobody would otherwise write, is worse than no comment at all.
Behaviour is unchanged. The two forms agree on every input from 0 to
99999 and on the edges: empty, non digits, trailing junk, leading zeros,
65535 and 65536.
The note about atoi_short() stays, because that one still reports "no
digits" without reporting overflow. #326 replaces it with a version that
does both, and this should move onto it once that lands.
Saving the configuration drops the syslog server address whenever the log
of executed commands also contains "syslog on", which it almost always
does, since you have to enable the thing after pointing it somewhere.
parseConf() deduplicates by taking the matched text of a conf_overwrite
entry and removing every stored line that starts with it. For "syslog on"
the entry that matches is the catch-all ^syslog\b, so the matched text is
just "syslog" and the filter removes anything beginning with "syslog ",
including the "syslog ip ..." line saved a moment earlier. The address then
falls back to 0.0.0.0 on the next boot.
It fails quietly: nothing is reported, the running switch keeps logging
until it is restarted, and the loss looks like the firmware forgetting a
setting rather than the page dropping it.
Narrow the entry to the commands it is meant to collapse, so the address and
the port keep their own entries and are no longer collateral.
That alone would stop "syslog on" and "syslog off" from replacing each other,
because the list drops lines starting with the text it matched and "syslog off"
does not start with "syslog on". A separate list names the stem of such a pair
and collapses the two, which is what the catch-all used to do by accident.
The port was frozen at 514 in the call that opens the connection, so a
collector listening anywhere else was simply out of reach, and plenty do,
because 514 is privileged and containerised collectors usually get a high
port instead. Working around it meant putting a proxy in front, which then
rewrites the source address and hides which device actually sent the line.
Add `syslog port <n>`. The default stays 514, so nothing changes for an
existing configuration. Setting it tears the connection down and builds a
new one, the same dance the address already does, because uip_udp_new()
freezes the port into the connection.
The value is parsed here rather than through atoi_short(), which reports
"no digits" but not overflow: 65540 would quietly wrap to 4 and we would
open a connection to a port nobody asked for. Checking before each multiply
keeps it in 16-bit arithmetic. Zero then covers all three ways to be wrong -
no digits, past 65535, or an explicit "0", which is not a port either.
Whitelist the new command in config.js as well, next to `syslog ip`, or the
line is dropped without a word when the configuration is saved and the
setting quietly fails to survive a reboot. The dedup entry has to precede
the general `^syslog\b` one, otherwise it would deduplicate against
`syslog on`.
itoa_short() is new: itoa() only handles a byte and print_short() prints
hex, so there was no way to show a port as a decimal number. Kept separate
from itoa() rather than widening it, because every existing caller passes a
byte and would start paying for 16-bit divisions it does not need.
The scratch variables for the parser live in xdata. Locals there would take
internal RAM, and this image has none left: data ends at 0x77, the overlay
occupies 0x78-0x7f and the stack starts at 0x80. Measured: no module's DSEG
grew.
RFC 3164 has a hostname between the priority and the message text, and we
were sending nothing there. A receiver still has to fill that field, so it
takes the first word of the text instead, so every line arrives attributed to
"STP:", or "REGGET:", or whatever the log happens to start with. The sender
is then impossible to select on: the name changes with the content, and
anything in front of us on the path replaces the source address with its
own.
Observed on a collector behind a UDP proxy: the same switch showed up as two
different hosts depending on which subsystem had logged last.
Send the configured hostname. Skipped when it is empty, so we never emit a
lone separator.
The header length lives in xdata rather than on the stack. syslog_callback()
is __banked, so a local there cannot be overlaid, and while the variable
itself is only two bytes it costs more than that: it takes a register, which
pushes log_start out of one and into internal RAM. Those two bytes are
enough to stop an image carrying LACP and STP from linking at all.
Both conflicts are the register keyword removal meeting a change of ours,
so each takes main's signature and keeps what the branch was saying:
nic_rx_packet() still returns a bool, and port_ingress_filter_get() stays
declared.
main has since put its own copy of the STP module in BANK2, so the pragma
this branch carried is now duplicated. The one with main's comment stays.
Generate wrong address for `a4` location.
Both on read from and write to a __sfr32 variable.
Workaround:
Use two __sfr16 instead of one __sfr32.
We still get some optimalizations / better code gen.
The preamble scan cursor and the buffered-length parameter carry no
state between calls, so they do not need static xdata slots. As plain
locals the compiler places both in registers, trimming 64 bytes of
BANK1 code and two bytes of xdata.
The offsets shared by config_take() stay static: direct data space is
fully allocated on machines like the SWTGW218AS, so plain locals there
add overlay bytes that no longer link, and xdata-class locals spill
three temporaries into direct space while growing the code by roughly
120 bytes. Document pre_acc, whose accumulation across TCP segments is
why it must remain global.
d00f
René van Dorst
bloqaudio
logicog
Guoxin Pu